AWESOME VIDEO BROTHER I'M JUST TRIPPING OUT ON WHAT ALL MY PRO+ CAN DO MAN AND I HOPE YOU HAVE A GREAT WEEKEND AND THANK YOU BROTHER FOR THE BADAZZ VIDEO'S GOD BLESS YOU ALWAYS AND FOREVER 🙏✝️🙏 SINCERELY CLAY B. AND SPEED MOB RACING 🏁
Request please - updated video on setting up dual rates and throttle curves. I have it working but not sure if it's the proper most effective setup. I want to achieve smooth throttle control for my crawler and sometimes limit full throttle to avoid sudden launches during testing or simply to reduce power. Currently, I have it working for TR3 and TR4 in forward and brake modes. However, to adjust the expo and curves, I have to use the touchscreen to toggle settings on and off. I’m not sure if this is the best approach, but if it is, then I’ll go with it. Thank you for the updated videos on this radio; they’re really helpful for newcomers like me who just got one!
Could be anything, bad interference from cheap servo/esc receiver placed too close to metal, could even be something in the area your using it causing bad interference?
Do you know if you have to run an automatic electric switch to run two wire lights and be able to control them with the receiver channel? or is there a way around that? There could be a setting for it in the transmitter which would be awesome but I can't tell if there is or not.
Yes as with all transmitters you can't turn off the power from the receiver as all the + and - pins are connected so you will need a switch to control the LEDs but you can get LEDs/light bars that have 3 wires and can be controlled I have vids on them on my trx4 and the light bar on my slash ultimate
@@WTFRCCars Thanks, I will check those videos out. I have some 2 wire lights already is why I'm hoping I can find some cheap auto switches or something.
QUESTION FOR MY R1 DC1 NO PREP OUTLAW DRAG CAR SO IF I'M WANTING TO KNOW WHAT MY MAIN LIPO PACK VOLTAGE IS AND I'M RUNNING EVERYTHING FROM THE PACK ESC, STEERING SERVO, DRAG 4-POLE MOTOR ALL I NEED TO DO IS JUST PLUG IN THE POSITIVE WIRE OF THE BVD TO THE POSITIVE SIDE OF THE BALANCE BOARD PLUG AND DO NOT PLUG IN THE NEGATIVE WIRE AT ALL??? THANKS FOR YOUR HELP WITH THIS BROTHER!
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
AWESOME VIDEO BROTHER I'M JUST TRIPPING OUT ON WHAT ALL MY PRO+ CAN DO MAN AND I HOPE YOU HAVE A GREAT WEEKEND AND THANK YOU BROTHER FOR THE BADAZZ VIDEO'S GOD BLESS YOU ALWAYS AND FOREVER 🙏✝️🙏 SINCERELY CLAY B. AND SPEED MOB RACING 🏁
Thanks 👍 glad ya liking the pro+
Request please - updated video on setting up dual rates and throttle curves. I have it working but not sure if it's the proper most effective setup.
I want to achieve smooth throttle control for my crawler and sometimes limit full throttle to avoid sudden launches during testing or simply to reduce power. Currently, I have it working for TR3 and TR4 in forward and brake modes.
However, to adjust the expo and curves, I have to use the touchscreen to toggle settings on and off. I’m not sure if this is the best approach, but if it is, then I’ll go with it.
Thank you for the updated videos on this radio; they’re really helpful for newcomers like me who just got one!
Will be doing lots of pro + vids
Any chance of a video of the pro+ 1/5th scale fuel settings and how to calibrate properly?
Should be easy to do just add a 10th of a litre to the tank and run it till it uses it then work it out if I get time I'll do a vid
Hopefully you can help- getting bad range like less that 50yards or so. I have the FGR8b and FGR4s. Tried digital and 2.4. Thanks
Could be anything, bad interference from cheap servo/esc receiver placed too close to metal, could even be something in the area your using it causing bad interference?
Do you know if you have to run an automatic electric switch to run two wire lights and be able to control them with the receiver channel? or is there a way around that? There could be a setting for it in the transmitter which would be awesome but I can't tell if there is or not.
Yes as with all transmitters you can't turn off the power from the receiver as all the + and - pins are connected so you will need a switch to control the LEDs but you can get LEDs/light bars that have 3 wires and can be controlled I have vids on them on my trx4 and the light bar on my slash ultimate
@@WTFRCCars Thanks, I will check those videos out. I have some 2 wire lights already is why I'm hoping I can find some cheap auto switches or something.
QUESTION FOR MY R1 DC1 NO PREP OUTLAW DRAG CAR SO IF I'M WANTING TO KNOW WHAT MY MAIN LIPO PACK VOLTAGE IS AND I'M RUNNING EVERYTHING FROM THE PACK ESC, STEERING SERVO, DRAG 4-POLE MOTOR ALL I NEED TO DO IS JUST PLUG IN THE POSITIVE WIRE OF THE BVD TO THE POSITIVE SIDE OF THE BALANCE BOARD PLUG AND DO NOT PLUG IN THE NEGATIVE WIRE AT ALL??? THANKS FOR YOUR HELP WITH THIS BROTHER!
Yep that exactly how to do it just the + to the + on balance lead and you will get the pack voltage
@@WTFRCCars AWESOME BROTHER THANK YOU MAN AND THAT'S SO AWESOME MAN GOD BLESS 🙏✝️🙏 SINCERELY CLAY B. AND SPEED MOB RACING 🏁
Have you got a link to the advanced receiver please.
s.click.aliexpress.com/e/_Exr1jy0
@WTFRCCars thankyou
No worries