I've been trying to decide between the plus and the pro. When I stumbled upon your videos. They're extremely informative. Doing an in-depth video between the two would be well received I'm sure. Could you elaborate on the sensor data layout between the two. I wanted to run a full Suite of telemetry. Your opinion would be greatly appreciated and some insight between the two on the sensor layout. Keep up the good videos in your opinion between the two I would greatly appreciate so I can finally make a decision. Thank you!!
I've already done a number of vids on the nb4 and pro sensor readouts and the nb4+ is exactly the same as the nb4 sensor wise apart from the nb4+ can data log like the pro, my advice would be wait for the pro +
Yes I did know that, but what I figured out was the motor extension lead had been wired in reverse polarity. I reversed the leads and the motor works fine. Thank you for responding and I will continue to watch your videos.
Just got mine yesterday, got a race outdoor tomorrow. Switched from Spektrum Dx4s, definitely helped me with setup how I want it to be. Glad I found your video
Many thanks. Although I 'only' have a NB4, they are very similar and this video was very useful to get me started. I am aware that you have posted dozens of NB4 videos, which I will view once I have got properly started, i.e. expo settings. Thanks again
The timer function is cool. And it allows you to set a custom throttle input to start the timer. Set it to 90-100% throttle and it just start on you. Then set one of paddles as a reset button.
Thats awesome the new one can have back ground pictures I plan on replacing my old one for the new on the sole purpose that i cant stand taking the old one apart just to replace the battery. i feel like i might actually brake the plastic when i do it
Thank you for your excellent videos. I'm hoping you can steer me in the right direction. Here is my issue. I have the NB4+ with the FGr4S RX. I need to plug the motor cooling fan into the RX. How do I get power for the fan to turn on?
There's not a lot init, nb4+ has brighter screen, usb c, bigger battery in handle, trainer mode, head tracking, 8ch, miniz 2 RF mode and 5 extra memories the pro can assign 2 functions to each button, you can use the paddles as momentary buttons, more options to display sensors and 18ch all other features are the same
Hi, first of all thanks for your great videos. I have also buyed the nb4+ and have a question which that you might be able to answer for me :) - My car (a mjx hyper go) has a light function and I want to configure this with the noble but unfortunately I can't do it. If i set a button to ch3 or ch4 the light can only be "dimmed" or full light but not completely switched on/off. Do you know, if it is possible that a channel can be switched off completely ? In a older video for the nb4 i have saw that a special button can configure for lights...on the plus version i can't find this function. Regards Jens
So you need to know exactly what signal the lights need, the receiver always provides the same power on the + and - but the lights need to have a 3rd wire in the signal pin, if you look at what you have the button set to if it's working as a 2 position it will only send -100 or + 100 position, find a button/switch you can set to 3 position then you will have -100 0 +100 and this may be what you lights need to be dim off bright :)
I got the fly NB4 I have a xmaxx 8s and scx6 how would I get this controller to work do I have to put a new transmitter that comes with it into the car or how it works ? Someone help please thanks
Is your display bad as well? I'm not sure if it's a display issue or software issue. With mine at 84% brightness it seems to be at its full brightness because once I go higher from 85 to 100% there's literally no difference in brightness, it actually dims down a little more instead. Then I've noticed the 52% mark and 84% mark there's almost no difference in display brightness. It's so odd, so once I go to 53% and up it's slightly less brighter than when I'm at 52% brightness. With my old NB4 when I changed the brightness up or down it gradually changes, but with this NB4+ it does not change gradually and it seems like it gets slightly brighter and then dims then slightly bright again and it dims as I'm trying to adjust the brightness 🤔
This is something I have noticed but only if you keep your finger on the + and not when you go up by tapping the + but if you then back out the screen changes to the correct level I think it's just a bug in the way it increases the brightness if held down but as I say if you back out it correctly sets the brightness at the level you have set it too
@@WTFRCCars mine doesn't corrects the brightness when I back out and go back into the screen. Plus I've noticed it still does the same thing even if I just tap the + or if I hold it down.. I wonder if flysky is aware of that issue and is making an update for it. Plus I notice when you change the theme to blue or red it inverts the colors and you can see the wallpaper is inverted and it looks horrible
@steverc1986 so if you were to download the update for the EN version to your desktop, then create a shortcut to that update, then edit the target of the shortcut by adding the id string of your nb4+ from device manager on the pc it should flash the nb4+ that is the target to EN, but I have never tried it so wouldn't be able to offer any help in doing it other than the above :)
@ My receiver is: DASMIKRO FUTABA T-FHSS NANO 4CH TOWER ANTENNA GYRO RECEIVER DSK-604B . and my controller is Flysky Noble NB4+ 2.4G 8CH Radio Transmitter Remote Controller with FGR4S Receiver AFHDS 3 Protocol for Remote Control Car Boat . but I don't know how to connect them together . can you help me . thank you
Sure if you want to pay way more for a radio with less features, more expensive receivers, not as good battery life and a lower quality screen go for the m17, the nb4+ beats the m17 in every category even response times but sure m17 is king for you I guess ?
@@WTFRCCars hey genius I race on road and ask anyone it has the best feel to car and I guarantee it will smoke ur little toy transmitter in a latency test , so would futaba, and I have a different lipo for a battery I use and I have wireless charging so chew on that for a little
@midwestboss8808 you know there are pro racers winning with flysky radios, the m17 is not a bad radio at all, but your living under a rock if you think there is any difference between futaba, sanwa or flysky in response times, the flysky radios can run 1000hz servos or even the new ibus2 servos your just butt hurt because for £240 you can get a transmitter that is by any measures equal or better but hay keep telling yourself the m17 is way better but what will be your excuse when some guy or girl hands your ass to you running a flysky transmitter :)
I've been trying to decide between the plus and the pro. When I stumbled upon your videos. They're extremely informative. Doing an in-depth video between the two would be well received I'm sure. Could you elaborate on the sensor data layout between the two. I wanted to run a full Suite of telemetry. Your opinion would be greatly appreciated and some insight between the two on the sensor layout. Keep up the good videos in your opinion between the two I would greatly appreciate so I can finally make a decision. Thank you!!
I've already done a number of vids on the nb4 and pro sensor readouts and the nb4+ is exactly the same as the nb4 sensor wise apart from the nb4+ can data log like the pro, my advice would be wait for the pro +
Got mine today, first thing I did was turn the sounds off. 😂
THE BEST videos of this transmitter. Thank you, just picked one up today and all of your videos helped me tremendously with setup. Subscribed
Glad ya like the vids and ya will love the tx :)
Yes I did know that, but what I figured out was the motor extension lead had been wired in reverse polarity. I reversed the leads and the motor works fine. Thank you for responding and I will continue to watch your videos.
Spot on at least ya got it sorted
Brilliant, just bought one of these for my TRX-4, big help indeed.
The channel labels are great for diff lock and high low gear
@@WTFRCCars I have ordered a FGR8B receiver for just that 🙂
Great video tutorial, got this transmitter and got it working thanks for your support.
Thanks glad ya like the vids :)
Excellent....very useful. Thanks!
Just got mine yesterday, got a race outdoor tomorrow. Switched from Spektrum Dx4s, definitely helped me with setup how I want it to be. Glad I found your video
Ya will love it coming from spektrum so much faster response time
Many thanks. Although I 'only' have a NB4, they are very similar and this video was very useful to get me started. I am aware that you have posted dozens of NB4 videos, which I will view once I have got properly started, i.e. expo settings. Thanks again
Glad ya like the vids and they help :)
The timer function is cool. And it allows you to set a custom throttle input to start the timer. Set it to 90-100% throttle and it just start on you. Then set one of paddles as a reset button.
Yeh I've done a vid on just that too
Thats awesome the new one can have back ground pictures
I plan on replacing my old one for the new on the sole purpose that i cant stand taking the old one apart just to replace the battery. i feel like i might actually brake the plastic when i do it
It's really easy to swap the battery in any of them.
Thank you for your excellent videos. I'm hoping you can steer me in the right direction. Here is my issue. I have the NB4+ with the FGr4S RX. I need to plug the motor cooling fan into the RX. How do I get power for the fan to turn on?
All the ports of the receiver are live all the time + and - will be the same voltage that the esc is set to
Love your videos. Please make comparison between NB+ and the Pro
There's not a lot init, nb4+ has brighter screen, usb c, bigger battery in handle, trainer mode, head tracking, 8ch, miniz 2 RF mode and 5 extra memories the pro can assign 2 functions to each button, you can use the paddles as momentary buttons, more options to display sensors and 18ch all other features are the same
Hi, first of all thanks for your great videos. I have also buyed the nb4+ and have a question which that you might be able to answer for me :) - My car (a mjx hyper go) has a light function and I want to configure this with the noble but unfortunately I can't do it. If i set a button to ch3 or ch4 the light can only be "dimmed" or full light but not completely switched on/off. Do you know, if it is possible that a channel can be switched off completely ? In a older video for the nb4 i have saw that a special button can configure for lights...on the plus version i can't find this function.
Regards
Jens
So you need to know exactly what signal the lights need, the receiver always provides the same power on the + and - but the lights need to have a 3rd wire in the signal pin, if you look at what you have the button set to if it's working as a 2 position it will only send -100 or + 100 position, find a button/switch you can set to 3 position then you will have -100 0 +100 and this may be what you lights need to be dim off bright :)
@@WTFRCCarsThanks a lot for the quick response, i will try it
Excellent tutorial video.
Glad ya like it
Awesome instructional video. I'll be subscribing
Welcome to the channel :)
I got the fly NB4 I have a xmaxx 8s and scx6 how would I get this controller to work do I have to put a new transmitter that comes with it into the car or how it works ? Someone help please thanks
You need to swap out the receiver in each of the rc's to allow the nb4+ to control them
Awesome Review and Helping a lot!!!💪🏻🥇👍🏻
Thks my Friend 🐼👍🏻
HI
I finally have the NB4+, is it possible to change the language from English to Italian? Thanks
Not on the current firmmware unfortunately
Is your display bad as well? I'm not sure if it's a display issue or software issue. With mine at 84% brightness it seems to be at its full brightness because once I go higher from 85 to 100% there's literally no difference in brightness, it actually dims down a little more instead. Then I've noticed the 52% mark and 84% mark there's almost no difference in display brightness. It's so odd, so once I go to 53% and up it's slightly less brighter than when I'm at 52% brightness. With my old NB4 when I changed the brightness up or down it gradually changes, but with this NB4+ it does not change gradually and it seems like it gets slightly brighter and then dims then slightly bright again and it dims as I'm trying to adjust the brightness 🤔
This is something I have noticed but only if you keep your finger on the + and not when you go up by tapping the + but if you then back out the screen changes to the correct level I think it's just a bug in the way it increases the brightness if held down but as I say if you back out it correctly sets the brightness at the level you have set it too
@@WTFRCCars mine doesn't corrects the brightness when I back out and go back into the screen. Plus I've noticed it still does the same thing even if I just tap the + or if I hold it down.. I wonder if flysky is aware of that issue and is making an update for it. Plus I notice when you change the theme to blue or red it inverts the colors and you can see the wallpaper is inverted and it looks horrible
@CamaroWarrior yes they are aware of the brightness issue
Is the gbt the same as gpt +. I have gbt noticed the one your showing has color and few extras is it an update or different transmitter. Thanks
Sorry I don't know what a gbt is ?
@@WTFRCCars sorry ment nb4 and nb4+. But I seen another video u had and answered my question
@wildcardjoker no worries 😁
Thanks again
No worries 😁
Hi, I have a quick question.
I got my noble plus today. It is only Chinese version. Do you know how to change the language to English?
Officially you can't if it's the CN version of the radio
@@WTFRCCars do you know unofficial way?🤔
@steverc1986 so if you were to download the update for the EN version to your desktop, then create a shortcut to that update, then edit the target of the shortcut by adding the id string of your nb4+ from device manager on the pc it should flash the nb4+ that is the target to EN, but I have never tried it so wouldn't be able to offer any help in doing it other than the above :)
Do you get good range?
I've never had a range issue with any of the receivers so far.
mine can't update. can you tell me why?
You need to select update mode on the transmitter if you use the updater
@ My receiver is: DASMIKRO FUTABA T-FHSS NANO 4CH TOWER ANTENNA GYRO RECEIVER DSK-604B . and my controller is Flysky Noble NB4+ 2.4G 8CH Radio Transmitter Remote Controller with FGR4S Receiver AFHDS 3 Protocol for Remote Control Car Boat . but I don't know how to connect them together . can you help me . thank you
@VyKhánh-j9y you can't use a futaba receiver with a flysky transmitter they are different protocol
@@WTFRCCars please tell me which futaba receivers can the controller connect to
@VyKhánh-j9y none they only work with futaba transmitter
Sanwa M17 is King 👑
Sure if you want to pay way more for a radio with less features, more expensive receivers, not as good battery life and a lower quality screen go for the m17, the nb4+ beats the m17 in every category even response times but sure m17 is king for you I guess ?
@@WTFRCCars hey genius I race on road and ask anyone it has the best feel to car and I guarantee it will smoke ur little toy transmitter in a latency test , so would futaba, and I have a different lipo for a battery I use and I have wireless charging so chew on that for a little
@midwestboss8808 you know there are pro racers winning with flysky radios, the m17 is not a bad radio at all, but your living under a rock if you think there is any difference between futaba, sanwa or flysky in response times, the flysky radios can run 1000hz servos or even the new ibus2 servos your just butt hurt because for £240 you can get a transmitter that is by any measures equal or better but hay keep telling yourself the m17 is way better but what will be your excuse when some guy or girl hands your ass to you running a flysky transmitter :)
@@WTFRCCars great dude come race and see what happens
@midwestboss8808 I have vids in the channel of me racing and winning lol