www.amazon.com/gp/product/B07XWPT6XG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 www.amazon.com/gp/product/B07FVJKKV3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I Can't remember what ones I used, and the Bike has been sold, sorry this is all I can do guys. One of these links will work for the seal though
I bought a used 2022 Vader a couple of weeks ago and it's got this same leak. I picked up a complete gasket set from Amazon for like $9 that seems to have everything in there, so hopefully that crank seal is included in there (I bought the set thinking the leak was due to a larger gasket leaking, not a seal). Great info - thanks for posting this!
What bore kit would you add to the 125? But this has been definitely helpful I'm actually about to go through the same process within the next day because my oil leak is literally pouring, if it's no problem could you send me a direct link to the seals
Bro u made the best video I could find after weeks of searching but I cannot see crap in ur video even with the lights off and the brightness all the way up
I am having the same issue and sadly this video is too dark and unfortunately I can’t see the work or the seal. Would you happen to have a link of what seal you purchased?
@@loganperry8009 yea it’s the same part. But you have to mark sure you get the magneto back on tight or else you’ll be hearing a clicking sound. It’s just a small little seal that cover a small hole
Got this leak and haven’t even put 100 miles on the bike. I have the crank case breather tube open and tucked out of the way. Are the any other reasons why this might happen?
Where did you get your replacement crank seals? I got mine all apart (without destroying the original seal), and the OEM one is a 30.3 x 42 x 4.5 made by NJK, which I cannot find ANYWHERE (closest is a 30x42x4.5). The seal kit I scored on Amazon for a GY6 motor has the correct seal for the starter gear, but not the crank seal (the larger one under the starter gear), because the outer diameter is right but the inner seal diameter is too small to fit over the starter gear.
Can you please provide everyone including me the replacement part number or link to finding the seal you replaced? That would make you a TRUE hero. Please don't ignore our request for help.
You know what dude you actually might 100% be right! I had the crankcase vent covered with just a t-shirt chunk, I recently replaced that with an actual filter and I think the first time it blew off was when I put that filter on so maybe I'll try putting just the T-shirt back on!
www.amazon.com/gp/product/B07XWPT6XG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
www.amazon.com/gp/product/B07FVJKKV3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I Can't remember what ones I used, and the Bike has been sold, sorry this is all I can do guys.
One of these links will work for the seal though
@twowheeledadventures Thanks for the info. Stay safe.
Happy riding!
I bought a used 2022 Vader a couple of weeks ago and it's got this same leak. I picked up a complete gasket set from Amazon for like $9 that seems to have everything in there, so hopefully that crank seal is included in there (I bought the set thinking the leak was due to a larger gasket leaking, not a seal). Great info - thanks for posting this!
Np. sorry it's so dark near the end but I'm glad it helped you out a little!
What bore kit would you add to the 125? But this has been definitely helpful I'm actually about to go through the same process within the next day because my oil leak is literally pouring, if it's no problem could you send me a direct link to the seals
Bro u made the best video I could find after weeks of searching but I cannot see crap in ur video even with the lights off and the brightness all the way up
Yeah sorry about that, I was really hoping I could brighten it up a bit but to no avail.
Hey bro I was just wondering the size of the pulley puller. 8 inch ?
Might be a silly question, do you need to drain the oil before attempting this fix?
Really cool video bro Just wish it was a little more bright lol was looking for a video like this. My friends Vader is also leaking
I wish it was a little brighter too, sorry about that
@@twowheeledadventures no worries bro! Ride safe
Great vid, @8:50 what is this piece called? Because my chain connecting it broke
I am having the same issue and sadly this video is too dark and unfortunately I can’t see the work or the seal. Would you happen to have a link of what seal you purchased?
U fix ?
@@Junior-kc7mpdid you fix ?
@@loganperry8009 yea it’s the same part. But you have to mark sure you get the magneto back on tight or else you’ll be hearing a clicking sound. It’s just a small little seal that cover a small hole
@@Junior-kc7mp no it’s not the flywheel it’s where the top part of the chain connects with the flywheel pulley
Hey what are the seals you used called? thanks for the video btw
Where did you get the replacement gaskets from?
Got this leak and haven’t even put 100 miles on the bike. I have the crank case breather tube open and tucked out of the way. Are the any other reasons why this might happen?
Where did you get your replacement crank seals? I got mine all apart (without destroying the original seal), and the OEM one is a 30.3 x 42 x 4.5 made by NJK, which I cannot find ANYWHERE (closest is a 30x42x4.5). The seal kit I scored on Amazon for a GY6 motor has the correct seal for the starter gear, but not the crank seal (the larger one under the starter gear), because the outer diameter is right but the inner seal diameter is too small to fit over the starter gear.
I’m having this issue. So it’s a seal behind the flywheel
Noice fix!
Thanks!
@@twowheeledadventures how much is this sum bitch
Can you please provide everyone including me the replacement part number or link to finding the seal you replaced? That would make you a TRUE hero. Please don't ignore our request for help.
www.amazon.com/gp/product/B07XWPT6XG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
www.amazon.com/gp/product/B07FVJKKV3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Is it possible the crank case vent is not flowing freely and caused excessive crank case pressor witch blowed out the seal?
You know what dude you actually might 100% be right!
I had the crankcase vent covered with just a t-shirt chunk, I recently replaced that with an actual filter and I think the first time it blew off was when I put that filter on so maybe I'll try putting just the T-shirt back on!
@@twowheeledadventures I run mine back and down behind the engine no filter just like all motorcycles before smog laws
@@minibikeaction4266 I'll probably end up just doing that then sounds like a good idea!
For anyone wondering this did seem to indeed be the problem
This happened to mine after only twenty miles. The company wants to give me the replacement parts and refund me 50$.
Bro how are u working in the dark it so frustrating that ur the best video I could find but the video is too dark to see...
It's a lot brighter in person unfortunately
Anybody have a link to get the seal?
First of lights are critical for making an instructional video, it sounds like you know what you are doing tho,..l😅l
Yeah I'm really sorry about that, it got dark on me faster then I thought, for the videos sake I should have finished it the following day.
I think your lighting is actually worse than my videos LOL
Yeah, I was hoping to lighten it up in the editor a little bit but it didn't work out for me :(