Boom Vader Clutch Replacement | Grom Clone
HTML-код
- Опубликовано: 27 дек 2022
- in this video we try to replace the clutch on the boom vader. the one i got was from ebay but here is the one from ebay:
Clutch Replacement:
hamzn.to/42QVzN9
#BoomVader #gromClone #125cc
Things i upgraded off the bat:
Levers:
amzn.to/3pOsMGh
Carb:
amzn.to/3TkRqvN
Sprocket:
amzn.to/3wyPiql
Handlebars KLX110:
amzn.to/3R1Xzei
Grips:
www.cyclegear.com/parts/pro-g...
Mirrors:
amzn.to/3KkhMd7
Tail Light:
amzn.to/3ctJNCm
Fender eliminator:
tstindustries.com/tst-fender-...
LED turn Signals:
amzn.to/3wwnnHL
Exhaust:
amzn.to/3R6pRnK
Exhaust Midpipe:
amzn.to/3dYcWG9
Brake Lines:
amzn.to/3PPf5kT
Shift Lever:
amzn.to/3Tk6728
_____________________________________________
++ 📸 FIND ME HERE 📸 ++
Instagram - / freddierodz
Facebook - freddierodzphoto
_____________________________________________
++ ⚙️ MY GEAR ⚙️ ++
Motorcycle: '16 Kawasaki Ninja ZX6R 636
2020 Boom Vader
Camera: GoPro Hero 7 Black
Microphone: Giant Squid Omnidirectional Mic
_____________________________________________
Fix it Freddie back at it again! 🙌🏽 🔧
hell yea, nice thorough vid mayn. hopefully I won't have to do this for a while but thanks to this, will be confident when the time comes 🤘🤘🤘
Thank yo fam.
Zayummm you so smart. Nice video
I try
💪💪💪 Thank you for this
No problem 👍
So just an update. I've been selling my clutch cable relocations. Solving many peoples shifting issues without opening a single case. Let's keep putting that good information out there bro.
What’s does it do?
Noice work bro 👌 👏
Woot woot. Let’s gooooo!!
5:53 so can these take a kickstart ? I have a fuerza 125 and on my case cover it’s a opening for kickstart. Looks like someone capped it of with a odd screw and washer. Still drips oil. Wonder what to do about it. Sight glass or better block off??
Dont forget to push the tabs back down and soak the clutch in oil b4 putting it in
Awesome video bro. I have a video I worked out a fix for the rough shifting and poor cluck actuation.
Nice. Yea. Mine is pretty smooth now after adjusting it. 👌
Please put out a video on how to adjust these clutches correctly. Cause if that's it I'm baffled I've been adjusting clutches for about 30 years. 90% of these bikes can't shift well no matter what adjustment
@@bikebilderbear6786 I never had any issues shifting or actuation. I replaced it and it wasn’t going into neutral. After adjusting it works like before. Shifting is pretty smooth on my bike.
@freddieRODZ you are the first person I've heard say anything good about the way clones shift . Lucky you. Agen show us this adjustment process! I want to see the magic. Lol
@@bikebilderbear6786 yeah. We got 5 clones and none have hard shifting or clutch issues. They are very smooth when riding. Only mine I had to replace clutch after riding super hard with that 141 upgrade.
Where did you get the side cover gasket!! Thank you for the video
I didn’t. I reused it. But you can find one on eBay.
Yo Rodz wuddup bro bro? Quick question. What clutch plate are you using? I’ve been trying to figure out if the chimera plate will fit the Vader?
These are from eBay. The grom plates will not work you need to find one that fits a 50cc to 150cc. It has 17tooth/18tooth inner.
@@freddieRODZ oh aight. Good looking out my guy I appreciate it 🫡
Having an issue with my clone shifting from first to second, into gear while riding, bike on. Like the clutch isn’t engaging. Could it be just a clutch cable adjustment tho? Or larger issue? The bike so far has ridden fine before but recently had this issue with shifting except when bike is turned off, I can manually cycle gears.
Try the cable.
How many teeth is the clutch if you don’t mind me asking trying to find one but there’s a 18 and 17 teeth
i think thats it its like 18 inside and 17 outside is the one i got
What size is the socket tool to get the bolt for the clutch out?
I used the same tool as you would in a crf 50
Any idea where to get the clutch cover gasket?
eBay they sell them on a pack. For the lifan engines
Where did you find the new gasket
eBay. Search for lifan engine gasket
Hey where did you get that blue speedometer overlay?
I made it with some vinyl
@@freddieRODZ I was hoping you weren't gonna say that lol. Looks clean.
What frame and axle slider do you have
Axle sliders are from MKStunts.
Idk i got my clone 2day and it sometimes wont shift while riding i dont know why i pull the clutch in and go to shift and it wont shift its tenpermental
Adjust the cable. Find the sweet spot. All bikes are different
Love the vids and hoe u post links and even show how easy it is to do it yourself much love
Thanks
are you still using stock battery?
No. I’m using a chrome battery. From Amazon
Did you go with 17 tooth or 18 tooth
For the clutch? Yes.
My clutch went out on a Vader. I just bought with under 500 miles on it going about 75. On my way home from work. Got it towed back home and working on it in the basement attempted to remove clutch cover, and somehow stripped the two bolts on the cover And broke my Phillips head. Help.??!??!?!!??
Use an extractor to remove those screws.
I’m running 73mph on my clone.
Nice. Yea. I’m comfortable now in the 55/60 range. I’m heavy set so don’t mind it
@@freddieRODZyeah I like the lower rpm range. Being a daily I don’t want redline for 30 miles at a time. And in all fairness I’m not a big guy.
@@tobbiehelms283 yea. Same. But it’s all good. Running until it blows up and then replace the piston again lol.
How?? I’m hitting 62 on mine down hill and 58-59 flat ground. Only thing I have is exhaust and 17t front
That’s usually the range. That’s enough at least for me. The roads around me are no more than 50mph speed limit so no need to go faster. If I want to go faster I got another bike for that 😅