Replacing brake pads is easy and fast on any car

When replacing the brake pads on a car, several steps must be followed. First, lift the car on a lift or use a jack to lift the front or rear. Then remove the wheel from the brake disc. After that, unscrew the bolts or nuts securing the caliper to the brake mechanism.
The next step is to remove the caliper from the disc and remove the old brake pads. Carefully check the condition of the brake discs for wear or damage. If necessary, replace the discs or bore them (the recommendation is controversial, since opinions about boring vary).
After that, install the new brake pads in the caliper, making sure that they are correctly positioned and have no gaps. Push in the piston of the main brake cylinder. Lubricate the caliper guides. Return the caliper to its place and secure it with bolts or nuts. Install the wheel and tighten the bolts.
After completing the brake pad replacement process, pump the brake pedal, do smooth braking with low traffic, and perform several test brakes on an empty road to make sure that the brakes are installed and working properly. In case of errors or malfunctions, fix them.
Communication with the author:
RUclips Channel - / manowaroff
The group in VK "Manovarov's Bunker" - dmanspace
Personal VK page - dman31rus
Classmates (well, just in case) - ok.ru/manowaroff
Zen is still ours, our own, native - dzen.ru/dman31rus
Rutub - I haven't figured out why yet, but it is there - rutube.ru/video/person/33268130/
The cart is the main channel where everything falls - t.me/manowaroff
A cart with memes and jokes (spontaneous publications) - t.me/manowaroff_mems

[@user-ri1pj2vk4p]

Паминяли калотки пидаль праваливается медленна

[@Manowaroff]

воздух прокачивайте пробуйте