IMPORTANT STEPS after reflow 1. ATI settings in control panel should be manually lowered to least possible level in every tab. 2. Forget the Games.DO NOT play any games that will heat up the GPU with 3D Graphics. 3.Turn off windows AERO effects. 4.Keep the Laptop elevated using a laptop cooler or use plastic bottle caps to raise the ground clearance. These steps will ensure longevity of reflow repair. Upvote this to let others know.
I don't know how to say any beautiful word for Thank you to you. I followed your instruction and It's really work. My Dell dead for 1.7 years ago and now it's recovered ! I skip step of hair dyer just cleaning dust and put silicon. the effect that temp reduce from 80 to 48 wow !
I followed your instructions to the letter and everything worked perfectly first time. Thank you so much for this tutorial, you are a genius! Keep up the good work!
very usefully video i repaired laptop myself ,you described step by step ,so very clear to learn everything ,i thank you to you and you will continue further ,,NADEEN THIRIMANNA SRI LANKA
Thanks a bunch, you're video really helped a lot. I didn't need to reflow, but wanted to clean out all the dust and put some new thermal paste on the chips.
I've just done it but in shorter procedure. Without liquid flux and detailed cleaning. I heated per 2 min in 150 - 200 degrees Celsius. It've worked. I've been doing tests since 2 hours and everything works.
Great simple explanation.From a to z! I really do appreciate this video. It's too pricey if I would left it at Dell repair shop. Totally missed the flux in the re-flow process, that was a great hint. although renewing silicon paste is unbelievably effective for better thermal conductivity and thus lower temperatures. Still some isopropyl alcohol for cleaning the remaining flux near the edges would make it the best done. Keep it up . Liked and superscribed ;)
You are right, BTW 8 beeps doesn't meant every time for GPU malfunctioning. the scenario in this video is GPU malfunctioning because of which 8 beeps getting generated.
i did it myself and my laptop is working fine since fab 2017 although i tried this process twice . thank you +Piyush Prasoon :) a bit technical knowledge is necessary while doing such stunts. i hope to see more videos on such technical problem solutions soon by you +Piyush Prasoon :)
It will work only 1-2 months. Then it will back when you watch HD videos. re-flow is only temporally. Once ATI chip is defective that means it time to go. this is DELLs worst shitty stuff in their laptops. well Thanks. If some one can use more than 6 months after re-flow thats great.
Well, my pc wasnt broken but it was getting too hot , so i decided to openend before it get broken xD THANK U SO MUCH, its a perfect tutorial!! :D now it doesnt make a lot of noise like before :)
Hey I have a Dell xps 15 l502x. I have the same 8 beep problem so it is an lcd failure. I don't have thermal grease so I'm just going to open it a certain amount and try cleaning it. But my question is, can I still follow these steps even though I have a different dell laptop? Also is there any chance of the problem being fixed without thermal grease?
Here is the thing. This is only a temporary solution, the same problem will soon come back. Everyone think that reflowing or reballing a GPU will fix it. the fact is that 99% of the time it has nothing to do with the solder balls connecting the GPU to the motherboard. The actual fault is you have a bad GPU and applying the heat to the heatsink will give the temporary repair. The only way to fix it permanently is to replace the GPU.
hello that video is very helpful . i didn't find the FLux which you use for the graphic card and i use TOPNIK AG-5 . the air hot gun i use number 1 on 300 degrees and for about 2 minutes . It still work the laptop was fix but i hope is possible if you give little more info about your work like what should be the temperature on the air hot gun because not every gun is the same and what we can use instead of something what is hard to find . for me nothing on the video i couldn't find and i search allot to find something the same . But your work is very good and helpful thank you one more time and i hope to post more videos like that :)
You could go for Penny/Coin test to get the precise time for particular temperature. Check out the details on the link given below:- www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
there are several steps to check what's the exact issue if you laptop is not even responding after pressing the switch. you could check few steps here for understanding (do any thing under supervision of expert laptop technician). smallbusiness.chron.com/tell-battery-dead-computer-70237.html
I have also 8 beep problems screen goes black but it works well with HDMI on external monitor so what should be the problem in my laptop ? Before this problem my laptop heats too much so i can't understand is that GPU problem or LCD problem ?
+Jaypal Vansia You should check that yours graphics card is working properly or not. You can check it from device manager. For GPU test. 1. type device manager in start menu and open it 2. Find out display adapters, double click on it, you will find you GPU's name and model number. 3. Check whether it is working or not. For LCD test. 1. shutdown you pc 2. press D+power until bright screen appears , it will start test automatically you an also check out the video for GPU check and LCD testing on the links given bellow: LCD test---- ruclips.net/video/Lj4puS0b9SQ/видео.html GPU Test---- ruclips.net/video/huW6KqAqH0w/видео.html
The problem can be detected on the basis of beep you system is giving. You can go to the link given below and search for your beep type and can determine about the problem in particular part of the computer. Web URL: en.community.dell.com/support-forums/desktop/w/desktop/3624.beep-codes-and-psa-diagnostic-chart
+Ravi Teja If it is same laptop and making 8 beeps, than definitely it is the problem of graphics card. But better to perform LCD and GPU test. click on the link bellow to see how to perform tests. LCD test---- ruclips.net/video/Lj4puS0b9SQ/видео.html GPU Test---- ruclips.net/video/huW6KqAqH0w/видео.html
Hi Piyush I have the same laptop. I had the issue of 8 beeps when switching on the laptop. I followed the steps. However I didnt have thermal paste and Flux with me. So I just used the hot air to heat the graphics chip. However, after re-assembing everything the laptop has stopped booting altogether. There are no more 8 beeps and the light on the power button is also not getting up when pressing it. Any idea as to why it could happen?
Don not turn on or use your laptop without applying thermal grease, as soon as you press the power button of laptop GPU, CPU and Video card along with other onboard chip is reaching up-to 40 to 60 degree temperature all at a sudden (i.e within 4 -7 sec), and if temperature will increased in drastic manner it will not allow to turn on the laptop to save the processing units from burning. This might be on of the reason why you laptop is not turning on. At list you could place the old thermal grease on the processing units which will work but not for long time >this 8 beep problem is coming due to GPU heat up so keep your laptop as cool as possible. Alternative of thermal grease: use Colgate white color paste and use it carefully do not let it fall on any other exposed components on the MB. toothpaste might be conductive. in case if it still did not work, the re-check all the connections carefully. 1. battery charging board connection with motherboard(MB) 2. Power switch cable connection with MB 3. all other data-bus or cable connections. CAUTION: PERFORM ABOVE STEEPS AT YOUR OWN RISK. Do let me know in case you need further help on the same.
Hi Piyush, thanks for the video. I'm getting the error 'Display driver stopped responding and has recovered' - error (this is normally happening on overheating) after which the screen gets distorted and the system has to be rebooted (as it does not recover on its own). On rebooting there are 8 beeps - I have to enter the system into Safe Mode after which I have to disable the driver software in (Safe Mode >> device manager >> Display adapter >> disable - Ati mobility radeon 5000 series) and restart the system in normal mode without the driver software. Also sometimes the laptop screen wont start on D+Power button, i have to plug the system to external monitor with VGA . Please help. I'm confused as to its is the GPU problem or the Driver Software Compatibility or LCD (cable / screen) . If its the GPU should i go for reflow or reballing?
For sure it is GPU problem. Use you laptop as long as it is working and you should keep your laptop as cool as possible. But at last you need to go with the GPU re-flow or GPU re-balling, better to go with the re-flow as GPU re-balling is done by very few repairing center and cost you much. The problem you are facing is the same problem for which I have posted the above video.
I really liked the video except for too much thermal grease on CPU & GPU...when u push the heat spreader & tighten screws 90% of it will flow away from the chip...heat spreaders are almost flush to the chip except some uneven surface,thats why we put a layer of thermal grease which removes any possible air gap & conductivity is maintained 100%
Hi, brother my laptop n5010 having same issue, but also touchpad and keyboard is misbehaving, also battery is not showing, is these all related to GPU issues.. After reflowing these will be solved? Please your valuable advice...🙏
All problems which you mentioned in the comment is an individual problem. Solution for GPU problem is in the video. Other problems occurs because of dusts, specially this occurs in humid climate. - Cleaning the laptop properly would resolve this problem.
What thermal paste is should I buy for my inspiron n5010... There are so many products in the market. Cooler master 8w/mk, 5w/mk, 2w/mk (all these have viscosity 100 - 200pa-s and there is one particular brand which has 1pa-s and conductivity 30w/mk
Brother, don't go for online purchase, I have purchased this at Chandni Chawk electronics market located at Kolkata. You can go to any computer parts or computer whole sale dealer(eg: processor, heat sink etc), there you will definitely get thermal grease in not more than ₹ 50.
Hello. I'm also having a Dell Inspiron N5010 (ATI Mobility Radeon HD5650) and the same issue. I hope to try things which you have done in this video and could you please let me know that do i really need to use Flux before heating the GPU? or is it enough just heating the GPU without using Flux on it? Waiting for your reply AS SOON AS POSSIBLE, because i'm really in a trouble this time with this error :( . Thank you.
Yes it is important to use flux because In high-temperature metal joining processes like soldering, the primary purpose of flux is to prevent oxidation of the base and filler materials. for example, tin-lead solder attaches very well to copper, but poorly to the various oxides of copper, which form quickly at soldering temperatures. Flux is a substance, which is nearly inert at room temperature, but which becomes strongly reducing at elevated temperatures, preventing the formation of metal oxides. Additionally, flux allows solder to flow easily on the working piece rather than forming beads. In case you are proceeding for the GPU re-flow without flux it would be definitely a temporary solution to fix this type of issue.
No, it completely depends on laptop motherboard, if there is any space available for GPU inside the laptop then only it can be placed otherwise no chance.
It depends upon the technical person, how precisely he is performing the re-flow. For me, my laptop is working smoothly since my first and last repair i.e 1.5 years ago. Conversion to Intel is not a bad idea, you can proceed for it.
This problem occurs due to overheating of laptop, to overcome this problem temporally you need to keep the laptop as cool as possible. Use good quality cooling pad to keep the laptop at nominal temperature and try not to use multiple application simultaneously or any bulky or heavy graphics application. If you want permanent solution of this you need to follow the steps below: 1. clean you laptop from inside. It might be possible that the exhaust vent is loaded with dust particles. and also apply new thermal grease on processor and GPU. 2. If 1st did not works then try replacing the heat sink with the new one. Most of the time 1st method works properly and give new life to your laptop.
it was a nice demonstration.there is one doubt about the pressure which you applied after heat gun process,how much pressure ,how to measure or compair the intensity of that pressure.
Very nice question Ratnesh. To understand the amount of pressure you need to perform the penny/coin test for you heat gun which you will use to perform the re-flow process. First you have to perform it with one coin by putting the soldering element on the coin, which will give you the idea about the time and temperature which is required to melt the soldering element. The next test you need to do with two coins, steps are given below: Test 2 (test with two coins) 1. take 2 coins. 2. cut the soldering element in size of nearly 3mm (cut 4 - 6 small 3mm soldering metal) 3. place 1st coin and put all the 4 - 6 cut-piece on that coin maintaining the small gape nearly of 2 - 3 mm. 4. now put the 2nd coin over this arrangement properly in sandwich manner. 5. Apply heat on the arrangement with the same temperature, time and the distance you have kept on the previous test. 6. after reaching the time limit, keep the heat-gun apart. 7. Take some flat surface cylindrical heat resistive object, and place it properly in the center of the coin and apply the pressure in such a way that the soldering element did not bridge the connection. This part is very tricky, if you are performing it on your computer be careful, in the video I have placed the screwdriver just after re-flow but applied a very small pressure after 4 - 5 sec because as the time goes the soldering element is approaching the stage of getting solidify. I have performed 2 - 3 times coin test to get perfection. Most of the time this dose not require, you can skip this process. to know what is a penny test click on the link given below: www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
Thanks so much my brother I know that i came very late But i want to ask about liquid flux Is there is any link in your channel showing how we can make it please?
Hello Piyush. Thank you for making this professional video. If possible, could you please make one on how to bypass amd/dedicated GPU so that only integrated Intel GPU gets used? I had my amd gpu reflowed a year ago and it has given up on me. I am not sure reflowing again would last long now.
Thank you for the comment, I am not having the old model laptop as of now, however I will try my best to make a video on bypassing GPU to use integrated intel video card directly. In the mean while you could try GPU re-flow once again in the same manner as you have done it previously or as I am doing in the video. Thank you.
Hello Mr Prasoon.I have the same type of laptop and the same problem the video card.Please tell me what type liquid must order?How to call it?as nume?and conductive paste?Thank you.
check out the following links: Thermal grease/compound> www.amazon.com/Coollaboratory-Thermal-Compound-Processor-Heatsink/dp/B0039RY3MM Liquid Flux> www.amazon.in/MAXFIX-LIQUID-FLUX-100ml/dp/B01N3U9JI3?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=67e55168-07f2-4ff5-a9df-b1f1a18b7dab
for just re-flow it could be 500 to 1500 INR. for reballing the GPU 4k to 7k. I would suggest not to do it. In case you are going with the above option ask them to provide guarantee for at least 6 month. Cause I did not found any repairing shop, even good repairing center providing even 3 month warrantee. Some good repairing shop will provide you 30 days warrantee. Not if you are spending huge amount on this like reballing then ask them for the warrantee at least for 1 year otherwise don't go for it. It will be a bad deal for you.
I performed lcd test and its shows different colors and then again start 8 beeps with black screen and produce too much heat... What's the problem please tell me
It is definitely a problem of heating, which already affected the GPU. Try cleaning your laptop specifically the exhaust vent and apply new thermal grease then check if this problem is resolved.
I am thinking in upgrading the processor of my n5010. Do you know if I can put an Intel Core i7-840QM processor on this motherboard? (this processor doesn`t come with integrated video).
+Alexander González Chavarría I would not recommend you to do so. But if you want, then try it once but remember the processor should support the mother board chipset number. Also compare each and every pins/pads, cache memory, clock speed of processor with the previous processor which came with your laptop. If you laptop is slow, you can try to increase the memory (RAM) of your computer first. If it doesn't work then you can give a try to replace the processor. You can get details of Intel processor from : ark.intel.com/ perform these task, and if you are having doubt feel free to ask me.
+Alexander González Chavarría If you are not able to compare both processor just go to the following links: FOR i5:-- www.aliexpress.com/item/Shipping-free-Intel-Core-I5-430m-cpu-3M-2-26GHz-2533-MHz-Dual-Core-Laptop-processor/32501426457.html?spm=2114.01020208.3.1.L2f52K&ws_ab_test=searchweb201556_4,searchweb201644_3_79_78_77_82_80_62_81,searchweb201560_8 FOR i7:-- www.aliexpress.com/item/840QM-SLBMP-I7-4-core-8-thread-8M-1-86GHZ-3-2GHZ-original-version-PGA-original/32357735666.html?spm=2114.01020208.3.1.eDUDo8&ws_ab_test=searchweb201556_4,searchweb201644_3_79_78_77_82_80_62_81,searchweb201560_8
You could purchase it at electronics spare market or you could get it online. you could check out the links below for the stuffs. check out the following links: Thermal grease/compound> www.amazon.com/Coollaboratory-Thermal-Compound-Processor-Heatsink/dp/B0039RY3MM Liquid Flux> www.amazon.in/MAXFIX-LIQUID-FLUX-100ml/dp/B01N3U9JI3?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=67e55168-07f2-4ff5-a9df-b1f1a18b7dab Definitely you could go for other brands after checking the review properly.
It might be your laptop or computer LCD problem. you can perform some test, check the links given below: LCD Test : ruclips.net/video/Lj4puS0b9SQ/видео.html GPU Test/check : ruclips.net/video/huW6KqAqH0w/видео.html
Hello piyush sir, till yesterday my laptop was working fine, but suddenly the display went off while playing assassins creed. After that i took a look at this video & got to know that its a gpu problem and need to reflow it. But i am new to all this and don't have much technical skills in computer hardware. So i wanted to confirm from your side that what are the thinks which are tricky and needs to be done by a certified technician or will i be able to manage it completely, without any technical help? P.S I am a Mechanical Engineer
Some times laptop get overheated and suddenly turn off. If it is getting turned on again then you GPU is working fine you just need to clean up you laptop and apply new thermal grease over GPU and the CPU and try to keep your laptop as cool as possible specially while using bulky and heavy applications or gaming. And if you laptop is not getting turned on and giving 8 or 7 beeps then it is having GPU(for 8 beeps) or LCD(for 7 beeps) issue. you can perform the GPU re-flow process by your self, but if you are having any doubt in doing the GPU re-flow, don't apply to much heat, by applying a little heat your laptop will be working but for few months or for 1 or 2 days. If you are not comfortable with this, better to search for good technician or the computer center who is providing the grantee for the work. It will cost you nearly 700 to 1000 in INR currency.
Hello, I'm just wondering if I can remove the GPU unit to let the processor use the internal intel hd graphics, will that work? Thank you for the good video!
That is possible, however you need to de-solder few components from 1 place on the mother board and re-solder it to some other pace on the mother board, which require a great patient and soldering expertise. You could refer the video from the link below. link: ruclips.net/video/ohg8z9Bvm1Q/видео.html
The problem you are facing is not a problem of GPU, this is you LCD Display problem. Check the link below to fix it up. Video Link: ruclips.net/video/3HaGYpPOEMw/видео.html
And another thing when I do the D + power up button test the screen shows the colors correctly but when it tries to boot the screen is purple and blurry and I hear the 8 beeps. So is this an lcd failure or gpu failure?
For sure it is GPU failure, O Ooo... I am sorry don't call it as GPU failure, it is the fault in connection between GPU and the Motherboard. You can fix it by following the steps, I have performed in the above video.
you can check out the tear-down/disassembly videos of dell xps I502x it may possible that motherboard is of different design but the re flow process is same, but before re-flow perform a penny/coin test for for the heat gun. Penny test link: www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/ I have found one video for dell xps I502x disassembly video: ruclips.net/video/goVrdbWoOnA/видео.html You can check for the other videos.
You can do any thing, however take care of only one thing that, you laptop should not get heated up. Simply I can say, you need to keep you laptop as cool as possible while it is in switch on/working mode. It might be possible your laptop will be overheated in case you are playing any high resolution game, for which even a laptop cooler will fail, so as per my recommendation you should not play those games. you can do general stuff like watching movies, web surfing, documentation etc, I would like to recommend one more thing, avoid using multiple(heavy application) computer application simultaneously, to keep it cool.
It depends upon you budget, going for the best will be costlier, what I have used in the video is of budget price, it is working fine till present day. you could check the links given below both are of good quality. www.amazon.in/Buyyart-Original-DRG-102-Silicone-Compound/dp/B0189MV3UQ?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=67e55168-07f2-4ff5-a9df-b1f1a18b7dab www.amazon.in/AlexVyan-Thermal-Compound-Paste-Grease/dp/B071RCWDZN/ref=sr_1_7?ie=UTF8&qid=1498586065&sr=8-7&keywords=THERMAL+GREASE You could go for any other according to you choice considering customer reviews.
+imtiaz rahman No, not at all my dear!!! Thinner or white spirit is highly inflammable. Exposing these liquid to high temperature may catch fire and cause severe damage. And the second thing is that, the hair drier will not reach up to the temperature (250 - 300+ degree Celsius) which is required to perform the BGA soldering.
what components I have e to remove if I don't want that GPU or in case the GPU is dead and beep still comes? Buying new motherboard will cost me Rs/-15374
+Sandeep Sandhu In Dell Inspiron N5010 laptops, the motherboard circuit won't work if you remove the components for graphics card or remove the graphics card completely from the motherboard. The circuit was designed in such a way that this method will not work in this laptop. This will work on the laptops having removable GPU, as those laptops are having dedicated good configuration Video card embedded on its motherboard.
I want to clarify one thing that, if you are getting scrambled display then it's for sure the problem is related to GPU. You will not get 8 beep sound till you are getting any visuals on the screen. 8 Beeps occurs only if your are not getting visuals on the screen, only to identify the particular error, as number of beeps is a code to identify the error related to particular parts in the computer. In your case you are getting visual on you screen hence any technical person can understand that it is a problem of Graphics card.
dell inspiron N5010 is having on board GPU. Very few technicians are performing the replacement. By the way you GPU is not malfunctioning, It is not working properly because of the bad contact of it's pins/pad with the mother board. It can be corrected by performing the GPU re-flow, which I have performed in the above video.
Thank you for the video. I have Dell N7010. LED light and FAN start working but screen remains black and does not show anything. Does this procedure going to help me..... plz suggest if there is another option.
Dude, First of all connect it with external monitor. Check it step by step. Let me know if it is working with external display. do not go ahead with teardown until you r not sure what's the exact problem is
@@PiyushPrasoon I hv connected the laptop with my Tv via Hdmi cable. But it doesn't show anything. There was no output signal from laptop. What should I do next... help.
@@santoshkumarsingh5273 Bro, use VGA...cause if you are using HDMI cable then press the screen extension button on the keyboard 2times- mirror the display/3times - extended display/4times - for display in second screen only. but it would be better if u use VGA with monitor
i have the same issue with my dell inspiron N4010, ATI graphics.How is the response of reballing instead of reflow ?? how long would it last ? any cost estimate in rupees
Yes you are right, also I heard the same with many persons and it's obvious, cleaning the internal metallic pads of contacts and re-balling it again with good quality of soldering balls will add enough life to it. However for me re-flow is working from last 3 years till present date. most important is to search a right person/technician or service center to get rid of this issue completely.
Mine is i5 - 8250U. BTW changing/replacing a processor is very critical process, because most of the time pins are mismatching with the available processor slot on the laptop. So do a proper research and if you are getting a good processor with proper pin which matches the processor port you can try replacing it and check if its is working properly.
hi piyush.. nice video by You.. it has given me some direction at least..I am having same dell n5010... and since last 15 days. my day and nights are becoming worst and worst..bcz of this scrambled screen problem.. laptop works fine for two days,,but again on the third day suddenly it started giving scrambled screen.. what to do..I updated ATI drivers, but only for some time it worked.. and problem comes again.. one important issue is earlier there was Intel HD graphics available under display adapter category in device manger but now it's not there.. what it has gone i don't know.... can you tell me where it has gone.... please please please help me n guide
As per your problem stated above, it depicts that the GPU got de-soldered i.e it underwent bad contact with motherboard. If laptop is getting switched on for some time, continue using it in the same way till it supports. But it is sure that it will not get switched on after some days or month, the fix for this is given in the video, for proper fix you need to perform the GPU Re flow as shown in the video. And it is not the issue related with the GPU driver, If you laptop is getting switched on it means GPU is working properly till the laptop turned off. The main cause of this problem is accumulation of heat inside the laptop when it is running. If it is getting switched on for some time you can extend the time by keeping you laptop as cool as possible. In case you are having doubt you can check if it is giving 8 beeps or not. You can perform the LCD test to insure that the current problem is related with GPU or not. LCD test : ruclips.net/video/Lj4puS0b9SQ/видео.html if this fails then it is LCD fault.
+Alida Christina de Best My friend I have already explained and captured video shot especially for the equipment's name whenever I used any of the equipment and tools. Watch video carefully you will find every thing. In case you are having any doubt regarding particular tools or equipment used, be specific to ask about it.
My Laptop's Display Driver property says "This device cannot start (Code 10)" but my laptop is working fine even after gup problem. Can I continuously use my laptop or Do I need to visit any technician to fix it?
"Code 10" means your computer display drive is corrupted/missing. You need to uninstall the GPU driver and install it again from the original CD to bring back life to the GPU.
Sorry, But installing driver method is not working. After installing the GPU driver , it gets shut down and comes the blue screen with a warning "Attempt to reset the display driver and recover from time out failed".
you need to check the cable connection to motherboard if it is broken. Each tracings on the cable need to undergo with continuity check and then clean each part of the mouse touchpad properly. Caution: Perform all this at your own risk
Thank you very much for this great video. You did an outstanding job. I feel more confident now after seeing your video. One question please! My N5010 is beeping and the screen is completely black. It did start a couple of times, and in one of those times I was able to reinstall Windows 10, because that's when the problem started. It worked very good for a few days but it went back to beeping and the black screen. I tried to fix it using some videos on RUclips, but nothing works. If you have time; can you please do a video on fixing this issue? I really don't want to get rid of it. I have been using it for almost 12 years and I do like it; even if it's a little slow. You know; we get attach to things that have been good to us. I hate to do it but I have to order another one laptop to keep busy. However; I still want to fix this one. Thank you very much for all your help. I subscribed to your channel; so I will be looking forward to your next video. Take care. Tony Perez
Hey Tony, Even I felt the same with my Laptop. Any way how many beeps you are getting, if it is 8 beeps with black screen then it is having the same issue. For repairing you can follow the video. Best of luck and TC.
Graphics will enhance the visuals on your screen, most video cards are not limited to simple display output. Their integrated graphics processor can perform additional processing, removing this task from the central processor of the computer. Mostly graphics card equipped pc is used by graphics designer, gamer, architect etc.
I would like to tell you one more thing, these days as per my knowledge, cheap laptop equipped with graphics card is having average life of 2-3 years only. So better be sure before purchasing any laptop by reading the proper review from legitimate article or reviewer.
namaste sir mera laptop dell n4010 he us ka 8 times beep aa raha he aur display bhi nahi aa raha he aur agar us ko other vga port se display connect kare to aaraha he display to us ka problem kay he sir plz help me sir plzzzzz
Dell inspiron n4010 me GPU nahi hota hai, usme video card hota hai. To jaise maine is video me GPU ko re-flow kya hai, usi tarah se apko bhi dell n4010 laptop me video card ko re-flow karna hoga. Reference ke lye app Dell n4010 ka video niche dye kye link pe click karke dekh sakte hai. ruclips.net/video/QXfoom8HiO8/видео.html
Please Piyush, I took my laptop to the local laptop repair shop to perform a reflow. They said my model does not have an isolated Grafic card. Model Inspiron 15 5000 Series. Do you have any idea a work around they charge me $85. to tell me that.
It is really a high price, if they have charged you $85 for doing nothing, as these things can be reveled easily by searching it with particular model number for detailed information on internet. Even if you will go for the repair it will cost you in between of $30 to $50.
I text chat with Dell tec. support. He sais 8 beeps is LCD no more explanation. He will send FedEx to pick it up, fix and return it for $250. :-( I'll let you know what happen ;-)
Nice you have chosen the best option and yes, if any technician come to know about this 8 beeps error in 15 5000 series Dell laptop until they haven't diagnose it, they will tell you the same thing, however as per user's report most of the time 8 beep is responsible for the GPU failure in 15 5000 series Dell Laptops. And of course I will wait for your next response. Let me know if they are giving you warranty for 1 year or more.
i did that with my laptop and after month the problem back again and one told me that the gpu will not stand for long time if i heated again so is it replaceable or do anyone still sell these motherboards 😢 my laptop is Dell Inspiron n4030
hi dear piyush prasoon i have a problem win my graphic card work only in vga mode. in your opinion whats the type of this problem? ans reflowing my card did fix my card ? and what is the estimated service life after reflowing the graphic card? thanks for the video it is great and well presented
Hi Djalal, First of all please confirm the below points: 1. Did you ever taken you laptop for repair to local computer repairing shop? 2. Is GPU getting detected in device manager? 3. How old is your laptop? 4. since how long you start facing this issue?
@@PiyushPrasoon hi thanks for taking time to answer me, and for your questions: 1- yes i did, but i think that the technicien has only cleaned the exhaust fan so the GPU has start to work for one week and the problem reappeared. 2- the GPU is detected in divice manager with the instaled driver only on the safe mode and the screen show deformed colors ( i used glac bags in the aire inflow outside the laptop and the colors are slightly modfied) 3- i used my laptop for almoste 7 years ( used for long duration scientific simulations). 4- the issue has appeared since two weeks . thanks again
@@djalalsekhane984 It depicts your laptop is having issue with GPU. After re-flow it will be fixed. Try connecting an external display then check it once.
Please perform penny test to ensure how long and from how far you need to re-flow the GPU to achieve better result, rest depends upon you performances and preciseness. Even after doing GPU re-flow with great care may gives you -ve result or your PC may work for some days, months, 1 year or years. so don't get disappoint from 1 or 2 attempts. Link to check the procedure for PENNY Test method: www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
Yes it is a temporary solution, and my temporary time period was 1.5 - 2 years. So it completely depends how precisely it has been taken care and how good you are handling the laptop. Just one liner - try to keep your laptop well ventilated (keep it cool) while in use.
@@apolitik As per my knowledge this is the place where you could find the laptop spare parts and its Motherboard. pctech.co.in/ Note: Please confirm the same by your own before making a purchase.
IMPORTANT STEPS after reflow
1. ATI settings in control panel should be manually lowered to least possible level in every tab.
2. Forget the Games.DO NOT play any games that will heat up the GPU with 3D Graphics.
3.Turn off windows AERO effects.
4.Keep the Laptop elevated using a laptop cooler or use plastic bottle caps to raise the ground clearance.
These steps will ensure longevity of reflow repair.
Upvote this to let others know.
Very true Mr. Mohinesh.
Mohinesh Patil ,
I DO NOT play any games because my Loptop off after 10 to 15 seconds.
fan work well not overheating.
So no guarantee this will fix it permanently?because i wanna resurect the gpuchipto play games.Does it occur again if i play video games overtime?
Don't use the laptop at all and it won't go bad
Is it possible to remove the ati chip completely?
I don't know how to say any beautiful word for Thank you to you. I followed your instruction and It's really work. My Dell dead for 1.7 years ago and now it's recovered !
I skip step of hair dyer just cleaning dust and put silicon. the effect that temp reduce from 80 to 48 wow !
I followed your instructions to the letter and everything worked perfectly first time. Thank you so much for this tutorial, you are a genius! Keep up the good work!
मेरे लेपटोप मे 8-बीप एरर आ रही थी, आपके इस विडियो से मुजे ग्राफ़िक कार्ड के बारेमे बहुत कुछ जनेको मिला है,आप का आभार ।
+BHARAT MAKWANA धन्यवाद
+Piyush Prasoon please check out my coment
very usefully video i repaired laptop myself ,you described step by step ,so very clear to learn everything ,i thank you to you and you will continue further ,,NADEEN THIRIMANNA SRI LANKA
Glad it helped and thank you so much for your valuable comment.
Thank you for this video. I have Dell n5010 with same issue...
Now this video help me a lot and also save money.
Thank you
God bless You 👍☺
Awesome Solution.... Very Good .... Thanks for your video... I repaired laptop through follow your videos steps....
Glad to know it helped you :-)
Thanks a bunch, you're video really helped a lot. I didn't need to reflow, but wanted to clean out all the dust and put some new thermal paste on the chips.
Very detailed step by step! Exactly what I needed. thanks and congratulations!
I've just done it but in shorter procedure.
Without liquid flux and detailed cleaning.
I heated per 2 min in 150 - 200 degrees Celsius.
It've worked.
I've been doing tests since 2 hours and everything works.
That's great, keep it up.
Great video !! Very understandable and finally someone understands something of video instructions !!!!!
I have an n3010 that also has a fairly GPU... Nice vid
Thanks.....!!!
Great simple explanation.From a to z!
I really do appreciate this video. It's too pricey if I would left it at Dell repair shop.
Totally missed the flux in the re-flow process, that was a great hint. although renewing silicon paste is unbelievably effective for better thermal conductivity and thus lower temperatures.
Still some isopropyl alcohol for cleaning the remaining flux near the edges would make it the best done.
Keep it up . Liked and superscribed ;)
A real good instructional video, thanks to the "pedagogue"
Great, easily understandable and precise video! Thank you for taking the time and effort to do such a great job!!
Thank you so much for the appreciation and your valuable comment :-) .....!!
Very complex and intimidating procedure! This might be a last resort, as there are other methods for 8 beep issue.
You are right, BTW 8 beeps doesn't meant every time for GPU malfunctioning. the scenario in this video is GPU malfunctioning because of which 8 beeps getting generated.
Thank you very much! This video really helped me to get rid of the graphics errors!!
Nice educational video.
I have a pet peeve though. It’s not a video “card”, it’s a chip.
Thankyou and you are absolutely correct, its a video Processing Chip 🙂
great video. Helped a lot! was able to fix my laptop
thanks sir... you are genius. its really work in my dell n5010.. you saved my moneys thanks
thank you so much sir .what a cool explanation with full of safety steps sir
i did it myself and my laptop is working fine since fab 2017 although i tried this process twice . thank you +Piyush Prasoon :)
a bit technical knowledge is necessary while doing such stunts. i hope to see more videos on such technical problem solutions soon by you +Piyush Prasoon :)
Gaddi chala rahe ho ki stunt mar rahe ho 😂😂
Good video. Weldon explanation. I have facing this problem, now understand its solution.
Glad it helped
Excelent explanation, thank you very much!
thnx very much man :) this thing works :)
many times this problem costed me too much money :( this time i made it myself by watching your video :)
Thank you so much. it was really helpful. i have exactly same issue.
It will work only 1-2 months. Then it will back when you watch HD videos. re-flow is only temporally. Once ATI chip is defective that means it time to go. this is DELLs worst shitty stuff in their laptops. well Thanks. If some one can use more than 6 months after re-flow thats great.
What to do with the old laptop after that? I have on dell n4010 laptop. Is there anything that i can do with it Or is it kind of trash now?
Well, my pc wasnt broken but it was getting too hot , so i decided to openend before it get broken xD THANK U SO MUCH, its a perfect tutorial!! :D now it doesnt make a lot of noise like before :)
Hey I have a Dell xps 15 l502x. I have the same 8 beep problem so it is an lcd failure. I don't have thermal grease so I'm just going to open it a certain amount and try cleaning it. But my question is, can I still follow these steps even though I have a different dell laptop? Also is there any chance of the problem being fixed without thermal grease?
Sir, I need to know what is the graphic card model of inspiron n5010? I got a 6gb version. But not get graphic card.
thanks a lot buddy...
i save 10,000 rs.
because dell service center person told me the motherboard of your laptop suck you need new one.
Thank you for the good teaching.
Thank you very much my brother Piyush for this video. I had the same holidays and I fixed it through your video
Nice video, but using plain old heat gun is dangerous and easy to fry a board. Buy a cheap hot air station and that will be far better and safer.
Here is the thing. This is only a temporary solution, the same problem will soon come back.
Everyone think that reflowing or reballing a GPU will fix it. the fact is that 99% of the time it has nothing to do with the solder balls connecting the GPU to the motherboard.
The actual fault is you have a bad GPU and applying the heat to the heatsink will give the temporary repair.
The only way to fix it permanently is to replace the GPU.
hello that video is very helpful . i didn't find the FLux which you use for the graphic card and i use TOPNIK AG-5 . the air hot gun i use number 1 on 300 degrees and for about 2 minutes . It still work the laptop was fix but i hope is possible if you give little more info about your work like what should be the temperature on the air hot gun because not every gun is the same and what we can use instead of something what is hard to find . for me nothing on the video i couldn't find and i search allot to find something the same . But your work is very good and helpful thank you one more time and i hope to post more videos like that :)
You could go for Penny/Coin test to get the precise time for particular temperature. Check out the details on the link given below:-
www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
I have a laptop that died and wont post with any beeps. Would that likely be the CPU? It was a bit flaky before it went totally dead.
there are several steps to check what's the exact issue if you laptop is not even responding after pressing the switch.
you could check few steps here for understanding (do any thing under supervision of expert laptop technician).
smallbusiness.chron.com/tell-battery-dead-computer-70237.html
Really nice awasome explanation. 👌
can you please tell me the tool link from amazon or any other website from India, especially the grease ,screwdiver set and hot airgun purchase link
Thanks bhai...it is really helpful....
I have also 8 beep problems screen goes black but it works well with HDMI on external monitor so what should be the problem in my laptop ?
Before this problem my laptop heats too much so i can't understand is that GPU problem or LCD problem ?
+Jaypal Vansia You should check that yours graphics card is working properly or not. You can check it from device manager.
For GPU test.
1. type device manager in start menu and open it
2. Find out display adapters, double click on it, you will find you GPU's name and model number.
3. Check whether it is working or not.
For LCD test.
1. shutdown you pc
2. press D+power until bright screen appears , it will start test automatically
you an also check out the video for GPU check and LCD testing on the links given bellow:
LCD test---- ruclips.net/video/Lj4puS0b9SQ/видео.html
GPU Test---- ruclips.net/video/huW6KqAqH0w/видео.html
Hi i have a dell inpiron 3500 with the same problem black screen with a no stop beep sound.what could be the problem?
The problem can be detected on the basis of beep you system is giving. You can go to the link given below and search for your beep type and can determine about the problem in particular part of the computer.
Web URL: en.community.dell.com/support-forums/desktop/w/desktop/3624.beep-codes-and-psa-diagnostic-chart
worked like a charm but I had 1 screw left over when putting back together. LOL. can I be bothered opening it back up to see which one I missed.?
No problem you can continue using it, but handle/use you laptop with great care. check the comment by @Mohinesh Patil.
I have reflow my laptop dell n5110 inspiron but now it is not going to start when I on it shutdown in 5 second will u suggest useful tips
I have a problem it is giving beep sound after awhile of using laptop . and screen is scramble ??? can you help what might be the problem
+Ravi Teja If it is same laptop and making 8 beeps, than definitely it is the problem of graphics card. But better to perform LCD and GPU test. click on the link bellow to see how to perform tests.
LCD test---- ruclips.net/video/Lj4puS0b9SQ/видео.html
GPU Test---- ruclips.net/video/huW6KqAqH0w/видео.html
This video is very informative. Tq.
Welcome 😊
Hi Piyush
I have the same laptop. I had the issue of 8 beeps when switching on the laptop.
I followed the steps. However I didnt have thermal paste and Flux with me. So I just used the hot air to heat the graphics chip.
However, after re-assembing everything the laptop has stopped booting altogether. There are no more 8 beeps and the light on the power button is also not getting up when pressing it. Any idea as to why it could happen?
Don not turn on or use your laptop without applying thermal grease, as soon as you press the power button of laptop GPU, CPU and Video card along with other onboard chip is reaching up-to 40 to 60 degree temperature all at a sudden (i.e within 4 -7 sec), and if temperature will increased in drastic manner it will not allow to turn on the laptop to save the processing units from burning.
This might be on of the reason why you laptop is not turning on.
At list you could place the old thermal grease on the processing units which will work but not for long time
>this 8 beep problem is coming due to GPU heat up so keep your laptop as cool as possible.
Alternative of thermal grease: use Colgate white color paste and use it carefully do not let it fall on any other exposed components on the MB. toothpaste might be conductive.
in case if it still did not work, the re-check all the connections carefully.
1. battery charging board connection with motherboard(MB)
2. Power switch cable connection with MB
3. all other data-bus or cable connections.
CAUTION: PERFORM ABOVE STEEPS AT YOUR OWN RISK.
Do let me know in case you need further help on the same.
Hi Piyush, thanks for the video. I'm getting the error 'Display driver stopped responding and has recovered' - error (this is normally happening on overheating) after which the screen gets distorted and the system has to be rebooted (as it does not recover on its own). On rebooting there are 8 beeps - I have to enter the system into Safe Mode after which I have to disable the driver software in (Safe Mode >> device manager >> Display adapter >> disable - Ati mobility radeon 5000 series) and restart the system in normal mode without the driver software. Also sometimes the laptop screen wont start on D+Power button, i have to plug the system to external monitor with VGA . Please help. I'm confused as to its is the GPU problem or the Driver Software Compatibility or LCD (cable / screen) . If its the GPU should i go for reflow or reballing?
For sure it is GPU problem. Use you laptop as long as it is working and you should keep your laptop as cool as possible. But at last you need to go with the GPU re-flow or GPU re-balling, better to go with the re-flow as GPU re-balling is done by very few repairing center and cost you much.
The problem you are facing is the same problem for which I have posted the above video.
Thank you very much~
I really liked the video except for too much thermal grease on CPU & GPU...when u push the heat spreader & tighten screws 90% of it will flow away from the chip...heat spreaders are almost flush to the chip except some uneven surface,thats why we put a layer of thermal grease which removes any possible air gap & conductivity is maintained 100%
Your Info is much much appreciable, thank you so much for your recommendation. I will take care for the same next time onwards :-)
Hi, brother my laptop n5010 having same issue, but also touchpad and keyboard is misbehaving, also battery is not showing, is these all related to GPU issues.. After reflowing these will be solved? Please your valuable advice...🙏
All problems which you mentioned in the comment is an individual problem.
Solution for GPU problem is in the video.
Other problems occurs because of dusts, specially this occurs in humid climate. - Cleaning the laptop properly would resolve this problem.
What thermal paste is should I buy for my inspiron n5010... There are so many products in the market. Cooler master 8w/mk, 5w/mk, 2w/mk (all these have viscosity 100 - 200pa-s and there is one particular brand which has 1pa-s and conductivity 30w/mk
Get any of them, The thermal geese which I used in this video cost me INR ₹ 20. you will get the ₹ 10 syringe also. It will definitely work for you.
Piyush Prasoon The one which you have used is 800rs on Amazon... Do you have any unused paste?
Brother, don't go for online purchase, I have purchased this at Chandni Chawk electronics market located at Kolkata. You can go to any computer parts or computer whole sale dealer(eg: processor, heat sink etc), there you will definitely get thermal grease in not more than ₹ 50.
Hello. I'm also having a Dell Inspiron N5010 (ATI Mobility Radeon HD5650) and the same issue. I hope to try things which you have done in this video and could you please let me know that do i really need to use Flux before heating the GPU? or is it enough just heating the GPU without using Flux on it? Waiting for your reply AS SOON AS POSSIBLE, because i'm really in a trouble this time with this error :( . Thank you.
Yes it is important to use flux because In high-temperature metal joining processes like soldering, the primary purpose of flux is to prevent oxidation of the base and filler materials. for example, tin-lead solder attaches very well to copper, but poorly to the various oxides of copper, which form quickly at soldering temperatures. Flux is a substance, which is nearly inert at room temperature, but which becomes strongly reducing at elevated temperatures, preventing the formation of metal oxides. Additionally, flux allows solder to flow easily on the working piece rather than forming beads.
In case you are proceeding for the GPU re-flow without flux it would be definitely a temporary solution to fix this type of issue.
Is it compulsory to put thermal grease...as I don't have it..
its too compulsory....you could get it a little from any repairing shop. out side vendor will give you 10 ml in 10 or 20 INR
can it be possible to add internal gpu for gaming on a laptop when it is not available or not being there before ?? is it possible ?
No, it completely depends on laptop motherboard, if there is any space available for GPU inside the laptop then only it can be placed otherwise no chance.
I have the same issue with my N5010. Is this a permanent fix? or should i go for graphics conversion (ATI to Intel)?
It depends upon the technical person, how precisely he is performing the re-flow. For me, my laptop is working smoothly since my first and last repair i.e 1.5 years ago.
Conversion to Intel is not a bad idea, you can proceed for it.
Loptop turn on and work well after 10 to 15 seconds quick pover off please tell me problem? ... places tell me.
This problem occurs due to overheating of laptop, to overcome this problem temporally you need to keep the laptop as cool as possible. Use good quality cooling pad to keep the laptop at nominal temperature and try not to use multiple application simultaneously or any bulky or heavy graphics application.
If you want permanent solution of this you need to follow the steps below:
1. clean you laptop from inside. It might be possible that the exhaust vent is loaded with dust particles. and also apply new thermal grease on processor and GPU.
2. If 1st did not works then try replacing the heat sink with the new one. Most of the time 1st method works properly and give new life to your laptop.
it was a nice demonstration.there is one doubt about the pressure which you applied after heat gun process,how much pressure ,how to measure or compair the intensity of that pressure.
Very nice question Ratnesh. To understand the amount of pressure you need to perform the penny/coin test for you heat gun which you will use to perform the re-flow process. First you have to perform it with one coin by putting the soldering element on the coin, which will give you the idea about the time and temperature which is required to melt the soldering element. The next test you need to do with two coins, steps are given below:
Test 2 (test with two coins)
1. take 2 coins.
2. cut the soldering element in size of nearly 3mm (cut 4 - 6 small 3mm soldering metal)
3. place 1st coin and put all the 4 - 6 cut-piece on that coin maintaining the small gape nearly of 2 - 3 mm.
4. now put the 2nd coin over this arrangement properly in sandwich manner.
5. Apply heat on the arrangement with the same temperature, time and the distance you have kept on the previous test.
6. after reaching the time limit, keep the heat-gun apart.
7. Take some flat surface cylindrical heat resistive object, and place it properly in the center of the coin and apply the pressure in such a way that the soldering element did not bridge the connection.
This part is very tricky, if you are performing it on your computer be careful, in the video I have placed the screwdriver just after re-flow but applied a very small pressure after 4 - 5 sec because as the time goes the soldering element is approaching the stage of getting solidify. I have performed 2 - 3 times coin test to get perfection. Most of the time this dose not require, you can skip this process.
to know what is a penny test click on the link given below:
www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
Thanks so much my brother
I know that i came very late
But i want to ask about liquid flux
Is there is any link in your channel showing how we can make it please?
Hello Piyush. Thank you for making this professional video. If possible, could you please make one on how to bypass amd/dedicated GPU so that only integrated Intel GPU gets used? I had my amd gpu reflowed a year ago and it has given up on me. I am not sure reflowing
again would last long now.
Thank you for the comment, I am not having the old model laptop as of now, however I will try my best to make a video on bypassing GPU to use integrated intel video card directly.
In the mean while you could try GPU re-flow once again in the same manner as you have done it previously or as I am doing in the video.
Thank you.
Hello Mr Prasoon.I have the same type of laptop and the same problem the video card.Please tell me what type liquid must order?How to call it?as nume?and conductive paste?Thank you.
check out the following links:
Thermal grease/compound> www.amazon.com/Coollaboratory-Thermal-Compound-Processor-Heatsink/dp/B0039RY3MM
Liquid Flux> www.amazon.in/MAXFIX-LIQUID-FLUX-100ml/dp/B01N3U9JI3?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=67e55168-07f2-4ff5-a9df-b1f1a18b7dab
Could you please tell me how much they can charge if i went to repair the same from any laptop repair shop.
for just re-flow it could be 500 to 1500 INR.
for reballing the GPU 4k to 7k.
I would suggest not to do it. In case you are going with the above option ask them to provide guarantee for at least 6 month. Cause I did not found any repairing shop, even good repairing center providing even 3 month warrantee. Some good repairing shop will provide you 30 days warrantee.
Not if you are spending huge amount on this like reballing then ask them for the warrantee at least for 1 year otherwise don't go for it. It will be a bad deal for you.
I performed lcd test and its shows different colors and then again start 8 beeps with black screen and produce too much heat...
What's the problem please tell me
It is definitely a problem of heating, which already affected the GPU. Try cleaning your laptop specifically the exhaust vent and apply new thermal grease then check if this problem is resolved.
I am thinking in upgrading the processor of my n5010. Do you know if I can put an Intel Core i7-840QM processor on this motherboard? (this processor doesn`t come with integrated video).
+Alexander González Chavarría I would not recommend you to do so. But if you want, then try it once but remember the processor should support the mother board chipset number. Also compare each and every pins/pads, cache memory, clock speed of processor with the previous processor which came with your laptop.
If you laptop is slow, you can try to increase the memory (RAM) of your computer first. If it doesn't work then you can give a try to replace the processor.
You can get details of Intel processor from : ark.intel.com/
perform these task, and if you are having doubt feel free to ask me.
+Alexander González Chavarría If you are not able to compare both processor just go to the following links:
FOR i5:--
www.aliexpress.com/item/Shipping-free-Intel-Core-I5-430m-cpu-3M-2-26GHz-2533-MHz-Dual-Core-Laptop-processor/32501426457.html?spm=2114.01020208.3.1.L2f52K&ws_ab_test=searchweb201556_4,searchweb201644_3_79_78_77_82_80_62_81,searchweb201560_8
FOR i7:--
www.aliexpress.com/item/840QM-SLBMP-I7-4-core-8-thread-8M-1-86GHZ-3-2GHZ-original-version-PGA-original/32357735666.html?spm=2114.01020208.3.1.eDUDo8&ws_ab_test=searchweb201556_4,searchweb201644_3_79_78_77_82_80_62_81,searchweb201560_8
ok, thank very much for your advice. Very useful.
I OWE YOU BRO IT WORKS PERFECTLY.
Please suggest the flux and heat paste you have used (India) I wanted to give a try
You could purchase it at electronics spare market or you could get it online. you could check out the links below for the stuffs.
check out the following links:
Thermal grease/compound> www.amazon.com/Coollaboratory-Thermal-Compound-Processor-Heatsink/dp/B0039RY3MM
Liquid Flux> www.amazon.in/MAXFIX-LIQUID-FLUX-100ml/dp/B01N3U9JI3?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=67e55168-07f2-4ff5-a9df-b1f1a18b7dab
Definitely you could go for other brands after checking the review properly.
My laptop has a black screen but if connect it to a external monitor it works, can it be my GPU or is my screen?
It might be your laptop or computer LCD problem. you can perform some test, check the links given below:
LCD Test : ruclips.net/video/Lj4puS0b9SQ/видео.html
GPU Test/check : ruclips.net/video/huW6KqAqH0w/видео.html
very impressive, thanks.
thanks a lot, your video really help me a lot :-)
Hello piyush sir, till yesterday my laptop was working fine, but suddenly the display went off while playing assassins creed. After that i took a look at this video & got to know that its a gpu problem and need to reflow it. But i am new to all this and don't have much technical skills in computer hardware. So i wanted to confirm from your side that what are the thinks which are tricky and needs to be done by a certified technician or will i be able to manage it completely, without any technical help?
P.S I am a Mechanical Engineer
Some times laptop get overheated and suddenly turn off. If it is getting turned on again then you GPU is working fine you just need to clean up you laptop and apply new thermal grease over GPU and the CPU and try to keep your laptop as cool as possible specially while using bulky and heavy applications or gaming.
And if you laptop is not getting turned on and giving 8 or 7 beeps then it is having GPU(for 8 beeps) or LCD(for 7 beeps) issue.
you can perform the GPU re-flow process by your self, but if you are having any doubt in doing the GPU re-flow, don't apply to much heat, by applying a little heat your laptop will be working but for few months or for 1 or 2 days.
If you are not comfortable with this, better to search for good technician or the computer center who is providing the grantee for the work. It will cost you nearly 700 to 1000 in INR currency.
"Iam mechanical engineer" is that necessary?
Hello, I'm just wondering if I can remove the GPU unit to let the processor use the internal intel hd graphics, will that work? Thank you for the good video!
That is possible, however you need to de-solder few components from 1 place on the mother board and re-solder it to some other pace on the mother board, which require a great patient and soldering expertise. You could refer the video from the link below.
link: ruclips.net/video/ohg8z9Bvm1Q/видео.html
i have the same computer and it schows always negative colors ?? i can fix it like this ??
The problem you are facing is not a problem of GPU, this is you LCD Display problem. Check the link below to fix it up.
Video Link: ruclips.net/video/3HaGYpPOEMw/видео.html
And another thing when I do the D + power up button test the screen shows the colors correctly but when it tries to boot the screen is purple and blurry and I hear the 8 beeps. So is this an lcd failure or gpu failure?
For sure it is GPU failure, O Ooo... I am sorry don't call it as GPU failure, it is the fault in connection between GPU and the Motherboard. You can fix it by following the steps, I have performed in the above video.
Can I still follow these steps even though I have the dell xps l502x, it may be built differently right?
you can check out the tear-down/disassembly videos of dell xps I502x it may possible that motherboard is of different design but the re flow process is same, but before re-flow perform a penny/coin test for for the heat gun.
Penny test link: www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
I have found one video for dell xps I502x disassembly video: ruclips.net/video/goVrdbWoOnA/видео.html
You can check for the other videos.
Thanks for all the help! I'll try those things
you always welcome.
thank so much Sir
please answer me.
Can i do any thing in my laptop normally after reflow?
like ... play a video or play a game
You can do any thing, however take care of only one thing that, you laptop should not get heated up. Simply I can say, you need to keep you laptop as cool as possible while it is in switch on/working mode.
It might be possible your laptop will be overheated in case you are playing any high resolution game, for which even a laptop cooler will fail, so as per my recommendation you should not play those games.
you can do general stuff like watching movies, web surfing, documentation etc, I would like to recommend one more thing, avoid using multiple(heavy application) computer application simultaneously, to keep it cool.
how much will a technician charge if I go for amd to Intel onboard graphics conversion
Basically the cost might be Between 500 - 1000 INR beside this it also depend upon the shop.
which thermal paste would be best for dell Inspiron n5010 laptop heat sink.
Plz give me a link.
It depends upon you budget, going for the best will be costlier, what I have used in the video is of budget price, it is working fine till present day. you could check the links given below both are of good quality.
www.amazon.in/Buyyart-Original-DRG-102-Silicone-Compound/dp/B0189MV3UQ?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag=67e55168-07f2-4ff5-a9df-b1f1a18b7dab
www.amazon.in/AlexVyan-Thermal-Compound-Paste-Grease/dp/B071RCWDZN/ref=sr_1_7?ie=UTF8&qid=1498586065&sr=8-7&keywords=THERMAL+GREASE
You could go for any other according to you choice considering customer reviews.
Piyush Prasoon Thanks.
Brother can I use Thinner or White spirit instead of liquid flux???? And Can I also use Hair Dryer instead of Heat Gun?
+imtiaz rahman No, not at all my dear!!! Thinner or white spirit is highly inflammable. Exposing these liquid to high temperature may catch fire and cause severe damage.
And the second thing is that, the hair drier will not reach up to the temperature (250 - 300+ degree Celsius) which is required to perform the BGA soldering.
Thank you so much, brother!
you always welcome.
what components I have e to remove if I don't want that GPU or in case the GPU is dead and beep still comes? Buying new motherboard will cost me Rs/-15374
+Sandeep Sandhu In Dell Inspiron N5010 laptops, the motherboard circuit won't work if you remove the components for graphics card or remove the graphics card completely from the motherboard. The circuit was designed in such a way that this method will not work in this laptop. This will work on the laptops having removable GPU, as those laptops are having dedicated good configuration Video card embedded on its motherboard.
Thanks a ton mate..
hi piyush I have the same problem of scrambled screen but my laptop doesn't gives 8 beep sound. what could b the problem ?
I want to clarify one thing that, if you are getting scrambled display then it's for sure the problem is related to GPU. You will not get 8 beep sound till you are getting any visuals on the screen. 8 Beeps occurs only if your are not getting visuals on the screen, only to identify the particular error, as number of beeps is a code to identify the error related to particular parts in the computer. In your case you are getting visual on you screen hence any technical person can understand that it is a problem of Graphics card.
So is there a need to replace graphics card? If there is then what's the approx cost?
dell inspiron N5010 is having on board GPU. Very few technicians are performing the replacement. By the way you GPU is not malfunctioning, It is not working properly because of the bad contact of it's pins/pad with the mother board. It can be corrected by performing the GPU re-flow, which I have performed in the above video.
The liquid you use. What it's call mr? ( not the thermal grease but the other one).
That is liquid flux.
Thank you for the video. I have Dell N7010. LED light and FAN start working but screen remains black and does not show anything. Does this procedure going to help me..... plz suggest if there is another option.
Dude,
First of all connect it with external monitor. Check it step by step.
Let me know if it is working with external display.
do not go ahead with teardown until you r not sure what's the exact problem is
@@PiyushPrasoon I hv connected the laptop with my Tv via Hdmi cable. But it doesn't show anything. There was no output signal from laptop. What should I do next... help.
@@santoshkumarsingh5273 Bro, use VGA...cause if you are using HDMI cable then press the screen extension button on the keyboard 2times- mirror the display/3times - extended display/4times - for display in second screen only. but it would be better if u use VGA with monitor
i have the same issue with my dell inspiron N4010, ATI graphics.How is the response of reballing instead of reflow ?? how long would it last ? any cost estimate in rupees
Re-balling will cost to lot more then re-flowing, however if re-balling is done properly it will definitely have longer life the re-flow.
Piyush Prasoon I think reflow is a non reliable solution. A reballing would be more reliable, I am searching for the right people in Pune.
Yes you are right, also I heard the same with many persons and it's obvious, cleaning the internal metallic pads of contacts and re-balling it again with good quality of soldering balls will add enough life to it.
However for me re-flow is working from last 3 years till present date. most important is to search a right person/technician or service center to get rid of this issue completely.
Piyush Prasoon sounds good, I'll research for reliable reballing/reflow technicians
same laptop and model here
can i ask whats your CPU? is it i3 m350?
if yes, any recommend i5 cpu to upgrade this?
im looking for i5 m480
but i cant find anywhere, its super rare.
Mine is i5 - 8250U.
BTW changing/replacing a processor is very critical process, because most of the time pins are mismatching with the available processor slot on the laptop.
So do a proper research and if you are getting a good processor with proper pin which matches the processor port you can try replacing it and check if its is working properly.
@@PiyushPrasoon i see,
i rlly wanted to upgrade mine to i5, guess im gonna copy yours thnx a lot
@@AZ4ZEL666 Great..!! 👍👍
hi piyush.. nice video by You.. it has given me some direction at least..I am having same dell n5010... and since last 15 days. my day and nights are becoming worst and worst..bcz of this scrambled screen problem.. laptop works fine for two days,,but again on the third day suddenly it started giving scrambled screen.. what to do..I updated ATI drivers, but only for some time it worked.. and problem comes again.. one important issue is earlier there was Intel HD graphics available under display adapter category in device manger but now it's not there.. what it has gone i don't know.... can you tell me where it has gone.... please please please help me n guide
As per your problem stated above, it depicts that the GPU got de-soldered i.e it underwent bad contact with motherboard. If laptop is getting switched on for some time, continue using it in the same way till it supports. But it is sure that it will not get switched on after some days or month, the fix for this is given in the video, for proper fix you need to perform the GPU Re flow as shown in the video.
And it is not the issue related with the GPU driver, If you laptop is getting switched on it means GPU is working properly till the laptop turned off.
The main cause of this problem is accumulation of heat inside the laptop when it is running. If it is getting switched on for some time you can extend the time by keeping you laptop as cool as possible.
In case you are having doubt you can check if it is giving 8 beeps or not. You can perform the LCD test to insure that the current problem is related with GPU or not.
LCD test : ruclips.net/video/Lj4puS0b9SQ/видео.html if this fails then it is LCD fault.
Hello my friend , my question is what are the material work stuff did you use , can you write them for me so I could buy them ... thnx alot
+Alida Christina de Best My friend I have already explained and captured video shot especially for the equipment's name whenever I used any of the equipment and tools. Watch video carefully you will find every thing. In case you are having any doubt regarding particular tools or equipment used, be specific to ask about it.
My Laptop's Display Driver property says "This device cannot start (Code 10)" but my laptop is working fine even after gup problem. Can I continuously use my laptop or Do I need to visit any technician to fix it?
"Code 10" means your computer display drive is corrupted/missing. You need to uninstall the GPU driver and install it again from the original CD to bring back life to the GPU.
Sorry, But installing driver method is not working. After installing the GPU driver , it gets shut down and comes the blue screen with a warning "Attempt to reset the display driver and recover from time out failed".
did't you tried to format and re-install the OS, most probably this will work.
Excellent well done. I have one question. Did your Intel MH57 GPU worked?
Yes off-course brother and 2 months ago I exchanged it with brand new Lenovo laptop in an online shopping.
@@PiyushPrasoon Okay great. Your video was perfect though. I watched the entire thing.
How much it cost to repair the laptop for graphics card reflowing.
3K - 5K for proper reflow with new soldering balls
Bro touch pad not working in this model, how to fix it, any help?
you need to check the cable connection to motherboard if it is broken. Each tracings on the cable need to undergo with continuity check and then clean each part of the mouse touchpad properly.
Caution: Perform all this at your own risk
Thank you very much for this great video. You did an outstanding job. I feel more confident now after seeing your video. One question please! My N5010 is beeping and the screen is completely black. It did start a couple of times, and in one of those times I was able to reinstall Windows 10, because that's when the problem started. It worked very good for a few days but it went back to beeping and the black screen. I tried to fix it using some videos on RUclips, but nothing works. If you have time; can you please do a video on fixing this issue? I really don't want to get rid of it. I have been using it for almost 12 years and I do like it; even if it's a little slow. You know; we get attach to things that have been good to us. I hate to do it but I have to order another one laptop to keep busy. However; I still want to fix this one. Thank you very much for all your help. I subscribed to your channel; so I will be looking forward to your next video. Take care.
Tony Perez
Hey Tony,
Even I felt the same with my Laptop. Any way how many beeps you are getting, if it is 8 beeps with black screen then it is having the same issue. For repairing you can follow the video. Best of luck and TC.
@@PiyushPrasoon Thank you for replying. Yes; mines is also beeping 8 times. I will look up what you said. Thanks.
@@SaborLatino21 Then u need to follow the same steps, how i did in the video
Great It works 🔥
Glad to hear that
What is the different between without graphics card and with graphics card dell Inspiron n5010 laptop please sir tell me
Graphics will enhance the visuals on your screen, most video cards are not limited to simple display output. Their integrated graphics processor can perform additional processing, removing this task from the central processor of the computer. Mostly graphics card equipped pc is used by graphics designer, gamer, architect etc.
I would like to tell you one more thing, these days as per my knowledge, cheap laptop equipped with graphics card is having average life of 2-3 years only. So better be sure before purchasing any laptop by reading the proper review from legitimate article or reviewer.
namaste sir mera laptop dell n4010 he us ka 8 times beep aa raha he aur display bhi nahi aa raha he aur agar us ko other vga port se display connect kare to aaraha he display to us ka problem kay he sir plz help me sir plzzzzz
Dell inspiron n4010 me GPU nahi hota hai, usme video card hota hai. To jaise maine is video me GPU ko re-flow kya hai, usi tarah se apko bhi dell n4010 laptop me video card ko re-flow karna hoga. Reference ke lye app Dell n4010 ka video niche dye kye link pe click karke dekh sakte hai.
ruclips.net/video/QXfoom8HiO8/видео.html
Please Piyush, I took my laptop to the local laptop repair shop to perform a reflow. They said my model does not have an isolated Grafic card. Model Inspiron 15 5000 Series. Do you have any idea a work around they charge me $85. to tell me that.
It is really a high price, if they have charged you $85 for doing nothing, as these things can be reveled easily by searching it with particular model number for detailed information on internet. Even if you will go for the repair it will cost you in between of $30 to $50.
I text chat with Dell tec. support. He sais 8 beeps is LCD no more explanation. He will send FedEx to pick it up, fix and return it for $250. :-( I'll let you know what happen ;-)
Nice you have chosen the best option and yes, if any technician come to know about this 8 beeps error in 15 5000 series Dell laptop until they haven't diagnose it, they will tell you the same thing, however as per user's report most of the time 8 beep is responsible for the GPU failure in 15 5000 series Dell Laptops.
And of course I will wait for your next response. Let me know if they are giving you warranty for 1 year or more.
i did that with my laptop and after month the problem back again and one told me that the gpu will not stand for long time if i heated again
so is it replaceable or do anyone still sell these motherboards 😢
my laptop is Dell Inspiron n4030
Contact Service center to get it. BTW you can go to reputed local repairing center and ask them to bypass the GPU (will cost u around 3K).
@@PiyushPrasoon
thank u for the reply ❤️
hi..i dont have any heat gun...can i use hairdryer?...by the way mine is dell n4010...tq
No you can not, as it is not having high temperature range i.e 250 - 300 Degree Celsius
hi dear piyush prasoon
i have a problem win my graphic card work only in vga mode.
in your opinion whats the type of this problem? ans reflowing my card did fix my card ?
and what is the estimated service life after reflowing the graphic card?
thanks for the video
it is great and well presented
Hi Djalal,
First of all please confirm the below points:
1. Did you ever taken you laptop for repair to local computer repairing shop?
2. Is GPU getting detected in device manager?
3. How old is your laptop?
4. since how long you start facing this issue?
@@PiyushPrasoon hi
thanks for taking time to answer me, and for your questions:
1- yes i did, but i think that the technicien has only cleaned the exhaust fan so the GPU has start to work for one week and the problem reappeared.
2- the GPU is detected in divice manager with the instaled driver only on the safe mode and the screen show deformed colors ( i used glac bags in the aire inflow outside the laptop and the colors are slightly modfied)
3- i used my laptop for almoste 7 years ( used for long duration scientific simulations).
4- the issue has appeared since two weeks .
thanks again
@@djalalsekhane984 It depicts your laptop is having issue with GPU.
After re-flow it will be fixed.
Try connecting an external display then check it once.
i did same but 2 days only my laptop work fine after that same problem i got.any suggestion please....
Please perform penny test to ensure how long and from how far you need to re-flow the GPU to achieve better result, rest depends upon you performances and preciseness. Even after doing GPU re-flow with great care may gives you -ve result or your PC may work for some days, months, 1 year or years. so don't get disappoint from 1 or 2 attempts.
Link to check the procedure for PENNY Test method: www.laptoprepair101.com/fix-laptop-motherboard-with-failed-nvidia-graphics-chip/
I have the same problem with the same laptop. Is this only a temporary solution?
Yes it is a temporary solution, and my temporary time period was 1.5 - 2 years. So it completely depends how precisely it has been taken care and how good you are handling the laptop.
Just one liner - try to keep your laptop well ventilated (keep it cool) while in use.
@@PiyushPrasoon thank you. Very useful info. Since I lost my gpu, is there a place that you would suggest me to buy new motherboard for this laptop
@@apolitik As per my knowledge this is the place where you could find the laptop spare parts and its Motherboard.
pctech.co.in/
Note: Please confirm the same by your own before making a purchase.