EdgeTX Flaps to Elevator One Way Mix

If you've ever needed a mix to work in only one direction--as in down elevator for flaps--this video will show you how to do it.
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► Support the work I do here via Discord mee6.xyz/en/m/...
► RC Video Reviews Website: rcvideoreviews.com
► Discord - Hang out with the RCVR Crew: / discord
► RC Pilot T-Shirts! rcvideoreviews...
AFFILIATE LINKS
► Amazon Affiliate: amzn.to/3lEz5ZL
► Banggood Affiliate: www.banggood.c...
#RCVideoReviews #EdgeTX

[@charlesbeshaw9843]

FIXED: Wonderful video. Helped me to understand mixes. Helped me in setting up a UMX Turbo Timber Evolution. 3 position flaps on channel 6 Using switch SB on my Radio Master TX16S running Edge TX 2.9.2. Channel 6 is using -100 up, 0 mid, 100 down. The flaps work perfectly with 2 second speed. In mixes I have added elevator mixing for the middle and down positions of switch SB. Source is switch SB, weight is -17% with SB-, weight is -30% with SB down. With 2 second speed. However, elevator mixing only works for SB down. No elevator movement in SB-. Channel 6 monitor shows this also.
Oddly enough I tried using flaps or channel 6 as my source for the mix and the SB down works. SB- will give a momentary few % in the positive direction then return to zero. If I set the weight to 20% positive, SB- will give momentary movement of elevator in negative direction and return to zero.
I used the percentages recommended in the Timbers user manual.
Any ideas?
Working now, changed my source to MAX.

[@RCVideoReviews]

Good job.

[@adrianfpv]

Thank you for taking the time and writing down the answer! I'm setting up the exact same plane and experienced the same problem.

[@Zadonitz]

Thanks! Worked for me as well!

[@Balthazar030]

For me too but only if i take out the function x

[@Andrey-Kapeltsov]

Thanks!

[@williamcox3852]

You just get better on explaining new ideas in EdgeTX, this old man is having fun implementing this snippets. Keep up the good work John.

[@RCVideoReviews]

Good! Have fun with it.

[@fp-AvERY]

Thank you thank you. Setting up my first plane without a flight controller. This is such valuable information

[@RCVideoReviews]

Very welcome!

[@tonytruelove3576]

Brilliant tutorial, this is definitely the easiest way to do this and I had no idea about using the "func" in mixes! thank you. Tony

[@RCVideoReviews]

You're very welcome!

[@Deathwish_fpv]

Good job brother.. like your videos..they have helped me out lots

[@RCVideoReviews]

Glad to help.

[@davefetters3290]

Thanks for the video on this! Question, I have a three position switch. The middle position is partial flaps but I also want to mix down elevator into it. With the x

[@Mroswaldo16]

Same setting work for a switch? How can i use a 3 position switch?

[@moleisrich1]

Thanks

[@RCVideoReviews]

Welcome

[@paolo9535]

attaboy one more hit !

[@Sandokans]

Hello and thanka for all your support.
Can you make one video how to mix aileron and elevator, always for jet edf 50mm eachine? Maibe you not have eachine 50mm,but in general for who want to mix that settings?
Cheers and keep your good work!

[@RCVideoReviews]

ruclips.net/video/U0FmXP1VSmc/видео.html

[@Mikeylikesit1968]

I have my flap elevator mix using flight modes. Can do the mix while flying using the elevator trim . No guessing have much you need on the ground

[@RCVideoReviews]

Yeah, that's a good way to do it too.

[@brownie6451]

Just curious is there a way to adjust the compensation for the flaps on the fly while madening the plane for the first time.
By maybe making the elevator trim switch adjust while the flaps are down, but go back to normal trims when the flaps go back up.

[@RCVideoReviews]

EdgeTX • How To Change Weight [Rates] and Expo with the Knobs or Sliders
ruclips.net/video/lzWUhXblqus/видео.html
Flight modes would work too as they have the ability to set trims per mode.

[@nickhull83]

Any idea on being able to adjust the elevator down movement while in flight? On landing, lets say you have too much or too little elevator, is there an easy way to adjust this in mid fight?

[@RCVideoReviews]

ruclips.net/video/lzWUhXblqus/видео.html

[@Mikeylikesit1968]

Yep I use flight modes

[@RCVideoReviews]

Flight modes is an answer, but not the only answer. With gyros, I tend to use flight modes so I can have individualized trim to correspond with the gyro mode. In that case, using flight modes to mix flaps/elevator isn't a good idea because I might land with stab on, or stab off which both could have different trim arrangements.
Just pointing out there are several ways to do things on Edge as @flyer mikey is also pointing out.

[@chokechai2010]

EdgeTx - How to set failsafe?

[@RCVideoReviews]

It's receiver protocol dependent.