Kerfed MDF Slot Port Subwoofer Box - Paint and Carpet Combo
HTML-код
- Опубликовано: 13 сен 2024
- Bend and curve a fresh 3/4" MDF sheet and turn it into a beautiful L-port for vented car subwoofer box of a small but powerful 8 inch subwoofer.
Before watching this awesome subwoofer build video, please watch the previous video about the Lightning Lab XLS 8" 500w dual 2 Ohm car subwoofer to know more about its electro-mechanical data or so called the theile-small parameters in this link - • Lightning Lab XLS 8" D...
This small but beefy subwoofer has a very nice Kevlar cone and weighs about 7 kilos, very heavy for a small eight inches subwoofer. And is pre-wired with 10 gauge cables in each voice coils.
Ok, let's start the project by shopping a fresh sheet of 18mm MDF (medium density fiberboard) at a local home depot. Calculated and designed the box dimensions against the woofer's parameters using Bass Box 6 Pro, updated to the latest version. I've calculated to have a target box resonance of 47Hz just to give justice of the woofer's Fs which is about 54Hz. For the schematics and dimensions, proceed to TinkerCad on this link - www.tinkercad....
At 01:00 mark, cut 12 kerfs with 10mm gap distance in between them. Then wet before bending to prevent the board from cracking. We will use the old wood glue in strengthening the kerfs together and apply generous amount of No nail all purpose adhesive to further strengthen the kerfs. Once dried, cut 45 degree angle on every edge of the port to promote smooth air movement within the sound box.
Glue and nail all panels together and let dry. Use the table saw in cutting a little notch on the front baffle sides. This notch will be the place to tuck in the carpet seam for a more seamless look.
Paint and cover the rest of the box a charcoal black carpet. Use 4mm T-nuts and Carbon steel Allen head bolts in securing the woofer.
Once finished, test and measure the subwoofer system using Dayton Audio DATS v3 to verify final system impedance, which is about 41Hz. Not bad for a fresh, out-of-the box brand new 8 inches woofer!
And as always, please subscribe to get notifications on new uploads and watch out next week for the subwoofer bass test video.
Badass way to cover/coat the box. Wish I would've seen this video earlier. I like the radius on the port and you made it look simple too.
Thank you POE.
This would be perfect for my room, great job! Also, love how church is just vibin/snoozin😂
thanks brother. 😁😎 doggos are very helpful as usual 😂
More stylish and most beautiful unique enclosure ever 😃😎
Thanks tina
@@chrclmnky most welcome sir😀
That box is BEAUTIFUL!!!
🧯😎🔥
You favorite subwoofer brand
Yes kinda
watching here from Brazil, incredible video, well built box, perfect project.
Thank you Marcus.
I love the way you did the double baffle that is the way I'm going to do it for my box as well
Yes I need to double it because the sub is very heavy and very powerful.
@@chrclmnky most of the builds I see do double baffle with a top mount by just doubling the entire layer. I prefer it this way so as not to need to do that
I like your videos. Excellent woodworking and editing skills! 🔥
Many thanks. 😎👍🏆
my man, you make it look so easy!!
thanks brother
У Вас так просто все получается на видео, хорошая работа!) Приятно смотреть) Жду видео с проверкой сабвуфера)
Хотел спросить у Вас, вы делаете разминку динамика перед замером параметров? Или делаете расчеты короба используя заводские параметры?
@@pixiedixie hello how you doin. I measure the speaker right out of the box brand new.
@@chrclmnky понятно, спасибо за ответ) после разминки бывают значительно уплывают параметры. Я в порядке, спасибо. Надеюсь, что у Вас тоже все хорошо)
Your the best at building boxes
Bunch a thanks Sumair. 😎
Very good job man👍 Hi from Russia🤟
Thanks a many Black Flea 😁
Fantastic bro 🤜🏼🤛🏼
😎👍🍾
@@chrclmnky do you sell them also? Or is it just 4 youtube?
@@pimpdaddy8551 yes they're for sale. 😁. Previous projects were orders from clients to different parts in the Philippines.
@@chrclmnky okay but i think you do not ship to europe do you?😅
Sure i can buy a good box here but its not a unique masterpiece like your boxes 🤷🏽♂️
@@pimpdaddy8551 shipping boxes to EU from third world country Philippines will cost us ridiculously high.
I think the box turned out very well, but it must have been very expensive, a lot of wood and a lot of handwork. but an excellent job congratulations.
Thanks for the feedback. Yes somewhat expensive.
THAT BOX!!!!!❤️❤️❤️❤️❤️❤️❤️
Absolutely amazing build !!
Thanks Cristobal
wow kanindot jud..sir..duol.palang ta nag pa asembol.na unta ko nimo.da..because sakto jud sa specs tanan...super..tnx for sharing..God bless
👍
Sound test abangan ko yan
👍🍾
Hello a great video perfect job 👍👍👍👍 I love your Video’s greetings from Germany 🇩🇪 Kai
thanks Kai 👍😎
Melhor acabamento do youtube !
thanks
Galing na gawa 👍👍👍
Thanks 🌙🍷🌚
Nice work..
Hope to see more
Thanks a bunch. Yes more builds soon.. 😎🥳
Amazing brother you are the hope of the world 💞😘
Thank you so much 😀
As always best work 👍 best quality 👍 ✔ You are Amazing
Thanks brother, how you doin
You do wonderful work sir may God bless you!
Appreciate the feedback. 😎
Gettin better by the day😜
😁🕺
Great Video keep em coming How deep (leaving about 1/8 inch to bend) and How wide on your kerfing cuts That damn paint job is spot on !!!
10mm gap each kerf cut, and about 12 kerf cuts.
Your build skills are awesome. Be curious to see a video with flush mount subwoofer. Maybe you've already done one and have a video link.
Thanks very much. Here's some flush mounted sub box I have built.
- ruclips.net/video/xlHt4135WnE/видео.html
- ruclips.net/video/CUIhOLsQ94o/видео.html
- ruclips.net/video/mS8SMeTlTSE/видео.html
Awesome work
Thanks a lot 😊
VERY NICE!!!
Great project, IMO will be much better with a 10" competition subwoofer.
Most definitely
Goooood job 👍👍👍👍
thanks a bunch
Superb brother awesome work
Thanks
good box sir,continue your skill
🔩🔧📐🌞😎
Great job 👏
Thanks Chinna 😎🏆
very beautiful
thanks
Wow ang galing!
matsalams po
I need a box like that 😬😬😬
Wow sir i love lightning lab
🔧👍
Ang ganda!... Steve Meade of the Philippines.
😁🛠🔧😎
Super bro
thanks midhun
Excelente trabajo amigo, felicitaciones, por cierto cuantos litros tiene esa caja?. Saludos.
Hello Jairo. Thanks. About 24.5 liters net internal volume and 32.85 liters total
Ganda naman nyan sir ,,bagay sa trisikel ko,hehe,,peace😁
Yes sir pwedeng pwede. 😎
Cool 😎
Thanks 🥳🌞
@@chrclmnky your welcome uncle 🤩
@@handry92dequeljoe21 🥳👍
Excellent work, I just have one question. What is the intonation of the box and how many cubic feet does it have? Greetings, I love your videos
Hello Sebastian, box has a net internal volume of 24.5 liters and a total volume of 32.85 liters. If you like to know the dimensions, there is a link to the TinkerCad schematics in the video description. Check it out.
Looks good
Thanks
Very nice !
Thanks Thiago
galing boss!
Matsalams sir
Good wark
Hey man, super nice build, I have a question ! why are you screwing the screws first, unscrew it and then screwing it again ?? :)
Thanks. Nice question. I need the T Nut to bite under the MDF so it won't move when I attach the subwoofer. This is very important. You don't want the T Nut to fall loose when fastening the subwoofer.
There is a better alternative, use threaded inserts. They are a piece of mind versus T nuts.
eyyyy chadaha ana Lods
Matsalams sir
Love it
I need some advice....I am wanting a single 8 in a box for my fusion, just to add to the factory Sony system for some punchy mid/low bass. I listen to all kinds of music. What configuration would you recommend? Love your builds, keep going man!
Thanks for watching. A ported box tuned to 40-45Hz for your 8" sub will do very good. This box has a verified tuning of 41Hz.
@@chrclmnky perfect, thanks man
Great Video !! Can you shoot for a 35-37 final tuning ?
Could you please make a video about customized crossover
( home made)
Yes sure,.
Pogi ng gawa 👍👍
🕺🐕👍😎
Awesome
How you doin brother
Superb
Thanks 🤗 brother, how you doin
Welcome brother . I'm fine... you???
@@brokeyhub4482 just surviving.
Take care brother
I am srilankan 👍👍👍👍
Hello Pathum.
You didnt use screws? Kust brad nails and glue is enough??
They're good. Subwoofer is barely a 500w RMS
sir pwede po ba pakuan na agad yung mdf? or kailangan pa po idrill bago magpako?
Pako na agad. Use brad nailer.
@@chrclmnky pwede po martilyo gamitin pag walang brad nailer? kasi may nakita po ako na kailangan i drill muna kasi mabibiyak daw po yung mdf
Is a double baffle really necessary for a 8 inch speaker?
Not necessary for 400w and below. This one's a 500w and can peak to 1200w.
Boss anong bolts po ung para SA sub at San po poydi makaka order?
I'm from Indonesia
Ok. I think I can ship boxes to your country.
sama
Ganda ng gawa mo sir.sir san po kyo nkabili ng carpet yong black.thank you sir
Thanks. Charcoal black carpet was purchased per meter at a local upholstery store.
@@chrclmnky thanks
Boss San po poydi makaka order Ng Hanyang bults para SA subwoofer?
Muito top
🔥🛠😎
Sir please let me know about the configuration of ported enclosure for SONY NW1202 subwoofer..which has
320wrms power handling
Pay me $10 on PayPal so I can give you computations and schematics.
@@chrclmnky I commented this a couple weeks ago I think suggesting you do build plans and stuff for those of us too far
@@abdomination Yes the schematics are for free. There is a link to the TinkerCad schematics and design in every video in the description. Go check it out.
@@chrclmnky yeah for the ones that you have completed but I was talking about when someone has a specific need or requests like that guy
@@abdomination Yes there were some contacted me through email and I did them calculations and provided schematics for their preferred subwoofers in a particular vehicle in exchange some Paypal dollars. Most just wanted free. Hehe, plotting the schematics and calculating boxes will take me about 4 hours total, and others still complain why not for free. 😁
How did you manage to paint the inside of the port?
Just sprayed into it. It's not that deep.
Kasi interesado ako sa box nyo...magkano po ang box ng maliit na lightning lab? Yung katulad sa video mo...
Inbox nalang po on Facebook Page. facebook.com/ChurchOfBass
Ano mas maganda lightning lab xls 8 vs 1xl?????
12" sub should be at least a thousand watt to be cool af so XLS.
sir pwd po pagawa ng subwoofer 8" kasama na ung amplifier
💯💯💯👌👌
Thanks Batti
nao manda um progeto de sub de 8 pol em pdf ?
Yes, for a few Paypal $
how to tune a subwoofer enclosure make a video pls pls pls 😭😭😭😭😭😭😭
Just use a speaker designing software like Bass Box and WinISD.
@@chrclmnky 👌👌👌👌
My 8" subwoofer 150 RMS which enclosure size ??? Plz tell me
Use the schematics of this box. This is 8
Hi, is it possible to use this subwoofer as home theater sub?
yes
Cuales son las mediadas de cada tabla??
Hello, there is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
What type of wiring was that and what was the final impedance
Dual 2Ω in parallel is 1Ω.
@@chrclmnky okay I thought that was parallel dang I should have been doing like that type of wiring before way easier than trying to struggle shoving two wires in on the one side
Sir anong router bit po ang gamit mo? san nyo po nabili?
Just the normal spiral router bit in cutting the speaker hole. And just the normal roundover bit in cutting the edges. Router bits are sold on almost every online marketplaces.
Boss ano po tawag dun sa turnilyo na ginamit nyo... ty po...
T nuts, M4 size
Could you please give me the name of the software what you using to design the subwoofer boxes...
Bass Box 6 Pro
@@chrclmnky thank you 🙌
Doesn't the kerfed mdf swell when adding water?
Just a bit water to soften when bending.
@@chrclmnky okay, thanks
For Massive titan 15 5000 w 2800 rms, how much should the CAB liter be?
There should be suggested numbers in the enclosed documentation of the product.
@@chrclmnky Unfortunately, I couldn't find it. I searched on the internet, I still couldn't find it. Can we calculate the cabinet according to the watt and rms power?
@@mehmetsabrialtan460they usually work in between 3-8 cubic feet cabinets you can find simple enclosure calculators and port length calculators, but try to find the t/s parameters so you can make it good sounding 👍
Sir gud pm.ano po magandang size ng sub pra po s tricycle?salamat po
Need to measure available space and subwoofer's electro-mechanical data.
I Can have a mesuremat for this crate
pwede na.pang export
Very nice this box is size ???
Hello Pramod. There is a link to the TinkerCad schematics in the video description.
Thanks bro
5° like,,,
🎉
@CharcoalMonkey Hi I've been watching a few of your videos its quite interesting and beautiful woodwork...but I'm new to the car audio scene, I have a 8" SoundStream Reference R3.8 its 500rms dvc 2ohm, I would like to build a ported enclosure...I need help on this please 😅.
Hello Nitro. Thanks for the feedback. Yes I can help you.
@@chrclmnky Thank you so much for your time , soundstream.com/product/r3-8/ this my subwoofer , can you tell me what the specs my Enclosure should be I'm clueless rite now ... I just want to make full use of it . I'm sorry to ask such a selfish question😅
It's my first ever speaker I bought so yea...I'm a noob
Do you have the link for the screws you used?
They were bought locally and also available mostly everywhere. Just lookup M4 allen head bolts. And M4 T nuts.
@@chrclmnky thanks
I need to have you build me a box lol
Sure
@@chrclmnky cool. I live in Dallas Tx but my last box was made by mid mo audio (Ben furlong) it was a really cool box. He’s just extremely busy with personal things. Anywho, I just got this plane MDF slotted vent. I don’t like it and I was just in brain surgery and my sister found a “birch box, Kerf vent” I didn’t get to see it and once I got out of my 8th brain surgery and got to see it, I got a plain mdf slotted box. So I’m a little upset. I just want a single or possibly a duel but for right now just a single 12 with a kerf vent. It’s going in my Toyota. Let me get your Facebook or some type of info to go over this box in detail if that’s ok?
How much
What name of board did you used that box and how much?
MDF (medium density fiberboard)
@@chrclmnky how much?
@@dh4nnt755 why bother?
@@chrclmnky i'll buy sir
What software is used for the box?
Bass Box Pro 6
@@chrclmnky ok thanks
Qual a medida dessa caixa amigo?
Box is just small for an 8" subwoofer. There is a link to the Tinkercad schematics in the video description. Check it out.
Nyc ❤️
Thanks 🤗
Boss hm po pagawa ganyan box?
Inbox on Facebook.
@@chrclmnky ano po fb mo sir.
gener faster po fb ko
Boss ano po fb mo po?
@@genermatulin1646 @churchofbass
Hey brother, would you like to teach me how to make speakers? Software operation
Ok sure.
Good man
Thank you very much. When I work for a while, I’ll notify you again. Thank you again. I’m from Taiwan. How about you?
@charcoal monkey : can you suggest any subwoofer go along with logitech z906 inbuild amp.i broke my subwoofer
8" subwoofer please
Ok will do. I need to research for that .
@@chrclmnky thankyou brother for prompt reply.i was wondering if i will ever get a reply.
please recommend me.
Logitech z906 subwoofer is rated at 165 watt RMS,8 ohm impedance .
i was wondering if i can use 4 ohm dvc ,if i didn't get any 8 ohm subwoofer.
any luck @charcoal monkey
@@MegaAkshay22 be right back
Mag kano pagawa nang box sir? same subwoofer po tayo
Inbox on Facebook page po for more deets. Thanks.
wow perfect talaga sir ..complete lahat..sub test etc..wow...