That came out fantastic. Kerfed ports are difficult but always worth it. They beat cleaner and tighter, I think. Aeroport assemblies and kerfed slots are super versatile. Nice work man.
Trabalho maravilhoso!! Eu não sabia que poderia se fazer uma curva em material folheado porém, peguei a manhã!! Parabéns pra você !! E o teu cachorrinho arrumou uma amizade de 4 patinhas 👏👏👏 adorei.
@@chrclmnky Most of the saws that are not contractor saws have this issue, regardless of brand name. I'm in the same situation. How do you get the panels so straight?
I cam close to this for a memphis MOJO 15. it looks like a joke but dose the job well. at least until I do it again with 2 15s. this video is inspiring.
many times I have seen this video. because of your video I bought 2 jbl stadium 1224 (this type is available in my country). make a box using boxpro, but the results are not as good as the Llyod-burst song you played. thank you for your inspiration.
Great looking enclosure! Shame to put such a large hole into it for a terminal that's going to leak a good amount of air & would certainly prefer a drilled hole just large enough to squeeze the speaker wire through & add a little sealant to. Also, the recessed loading of the sub is a real nice touch & one you rarely see, unfortunately! Thanks for the vid!
You have a lot of skills to make something perfect. I have subscribed your video. It's very innovative and interesting to watch till the end without any skip. If I had you as my neighbour then I would have placed an order to make such one for me. Keep posting more n more videos. Lots of love friend.
Nicely done. I have a pair of that same JBL subwoofer I plan to have a box built. I'd like to get the same low range into the 20's. Gonna check out some more of your videos
This project is also awesome!! Could you please do one project. How to convert old 2.1 Creative SBS (Two speakers and one Subwoofer) to single compact vertical tower speaker. I want to convert it, but lack of knowledge in this area.
JBL Speaker and Manufacturer Home Made Box It's Very Very Recomended, The Voice Bass a Racing HOREGGG ( Indonesian Version) Excellent & Impressive 👍👍👍👍👍😉😉😉😉😉
Thanks for sharing the video and the information! Very useful (and entertaining with your lovely dogs running around). Excuse me if you already answered this question but what is the radius of the bended part of the port at the front and did you change the total port length? I have read that when using a (large) flange the outer part of the "mouth" shouldn't be used for determining the total length of the port. Ps. Could you also share the dimensions of the box? Tia.!
Many thanks for such inspiring feedback. Curve radius is 12" (outside dimension). There are exactly 12 kerf cuts with 10mm interval. Flanges and such don't really matter to me when calculating. All I do is to measure inner dimensions minus all the displacements when calculating boxes into BassBox Pro and WinISD. There is a link to the TinkerCad schematics of this box project. 😄
Excellent video as always! Nice test in the end please do more tests like these its kind of fun to see them go that low. Are these subs actually capable of going that low? like Down to 20hz?
Many thanks. This JBL has a factory 28Hz free to air resonance and I calculated the box to be lower than that. Exactly about 25Hz on Bass Box Pro 6 calculation but actual impedance verified by Dayton Audio DATS v3 shows 22Hz. That's 3Hz lower than calculated values.
Hello how you doin. Calculations are somewhat theory level. While actual impedance measurements are so far the most accurate in AC application benchmarking.
Hello Charcoal. I give you my most sincere congratulations for these videos, I'm sorry for the distance, I am writing to you from Italy otherwise I would have come to see you. Question, but if you decide to change my sub, if I email you the specifications, could you possibly design the box for me? I would take care of its realization, I have all the tools in the garage to make it, but I don't have the program for the design. Of course, it doesn't have to be a constraint. Once again congratulations. Greetings from Italy
Badass bro, great looking Box! I am a JBL Fanatic, I just got the Partybox 310 and have had their Endurance Sprint Bluetooth Headphones and am blown away by the Sound Quality that JBL Produces. How do you say that Sub sounds overall? Is it loud enough for you? I'm thinking of doing 2 of them in a Ground Shaker 30Hz Enclosure.... If not I'm getting the new Alpine Type X. Just curious on your honest opinion after having owned it and listened to it for a while now? Are you satisfied or would you say it's not quite loud enough, being it only Produces 500 Watts RMS VS The Kicker L7 & Alpine Type X that produce 800-1200 Watts RMS?...
Very nice work. I would love a box like that for my 10" American Bass XFL, it shakes the heck out of my car. Using a prefab Qbomb a variation of the box in this video but if I had that I'm sure it would sound even better. Do you have plans for my particular sub?
Well done btw it's not as hard as ppl think obvi u got to get your measurements & calculations correct that goes without sayin but as long as you take your time when you're cuttin & joining you'll be good... And you SHOULD be taking your sweet ass time this is supposed to be a labor of love take pride in that shit cuz I know it feels damn good when u bust out a build like this that just comes out money it's ALLL about them ohh's & ahh's and anyone who says it ain't, isn't being honest.😜 Bass on dudeman nice work.
@@chrclmnky always wanted to visit there, I noticed you get alot different equipment than what I ever see. The video u posted last week with the ts parameter on that 8", I noticed the subwoofer frame and motor is very similar to my sundown e8v6's
@@mikedavis9923 yes the Philippines is a nice place to tour, let's just hope this Wuhan shiz will end soon. I agree on the similarities to top brand woofers. I think manufacturers are sourcing their products from same factories in China. These woofers I recently uploaded are only half the cost versus the top brands like Sundown and Skar but same quality and output.
The brand is heavily marketed and sold locally through Facebook groups. There also an online marketplace selling the brand but they jacked up the price.
I've been a sound engineer for 16 years designing speakers and building them,
Nice job Dude!
and i love the way you work it "Clean all the time"
😇🧹
A work of art!!! And 22hz??? Damn!! I know that box was hittin with just that one sub!! Imagine two!! Quality craftsmanship!!
Yes sir. 😁
Duuuude, that plywood folding hack is genius, killer build.
Thanks. 😎
That came out fantastic.
Kerfed ports are difficult but always worth it. They beat cleaner and tighter, I think.
Aeroport assemblies and kerfed slots are super versatile.
Nice work man.
Thanks a bunch. 😄
That box is BEAUTIFUL!!📦😌
Very impressive craftsmanship
Thank you Gopaul. Cheers! 🤩 🥳
Trabalho maravilhoso!! Eu não sabia que poderia se fazer uma curva em material folheado porém, peguei a manhã!! Parabéns pra você !! E o teu cachorrinho arrumou uma amizade de 4 patinhas 👏👏👏 adorei.
Thank you very much, Carrado. I am mighty glad. 🤩
Very good...
The colour is very natural...👍👍👍
Thanks mate
Damn, that box is beautiful! Keep making these badass videos!
🤘
Very strong what you do. Congratulations, I look forward to watching your videos!
Thank you so much!
BEAUTIFUL WORK
Thanks Stanley
Man, that box is a thing of beauty. Good job!
Thank you very much! 🤩
Another badass box bro.. it should sound great.. love the kerf port and stain
🤠
Every thought of doing flat packs and sending the world wide , I will take one 🇬🇧
Good idea. Might consider that. Thanks.
@@chrclmnky well if you do please let me know
Excellent work
Good finishing
Neat and clean. Sir
Thanks very much, EK
@@chrclmnky cost of this subwoofer
@@midhuntech3872 Plenty of dollers.
I remember back in the days I purchased Pro Box it was like $150 bucks in the early 90's. Pretty cool.
Great looking box! Your process is well demonstrated! Making me wanna build a kerf port now!
Thanks a bunch. 😄
Now this is the best subwoofer
Thanks Divyam.
Wow.... I just witnessed perfection.. wish i could afford this..someday
Someday
Very well done...! I like the individual little all thread terminals you just drill though the wood better than the ones mounted in plastic.
Cool, thanks
Best box yet. Thanks for sharing. That Makita table saw seems to cut very well.
One thing I don't like about the MLT100 is its guide fence. Vert flimsy and very unstable.
@@chrclmnky
Most of the saws that are not contractor saws have this issue, regardless of brand name. I'm in the same situation. How do you get the panels so straight?
i like the look of kerf boxes compare to a regular slot port. it looks highend specially when the box is stained
Yes sir. I follow box builders like Pete Bass, TC Designs, Next Level Fabrication, and they kerf boxes no sweat.
It's fancy lol
That's sweet! You do excellent work bruh !
Big up 😁
The bass was awesome 🔥
I cam close to this for a memphis MOJO 15. it looks like a joke but dose the job well. at least until I do it again with 2 15s. this video is inspiring.
nice to hear. thanks for the feedback. go build subwoofer boxes patiently, and keep focus.. and be precise.
many times I have seen this video. because of your video I bought 2 jbl stadium 1224 (this type is available in my country). make a box using boxpro, but the results are not as good as the Llyod-burst song you played. thank you for your inspiration.
Thanks Rainold
Nice job cutting the radius. Also I like using the kreg pocket hole jig. Oh and I like the hex head fasteners for the sub. Good job. 👍
Thanks. 👍💪😍
Nice box
thanks Kavin
@@chrclmnky OK frd
Wah mantap totorialnya semangat
Thanks wahyuni
Good job.. 👏👏👏👏 what catches me here is the proper set of tools..
📐🔨😁🤘
Amazing build. Love curve of the port
Thanks Socoro
what a profesional, details like angles and allen bits
Thanks! 😎
seu acabamento chega da gosto de ver !!! parabéns pelo cuidado q tem com as caixas ♥ +1 SUB
many thank, Edhu Snow. 😄
Its looking cool
Many thanks, Ashwit. 😁
Great looking enclosure! Shame to put such a large hole into it for a terminal that's going to leak a good amount of air & would certainly prefer a drilled hole just large enough to squeeze the speaker wire through & add a little sealant to.
Also, the recessed loading of the sub is a real nice touch & one you rarely see, unfortunately!
Thanks for the vid!
Que qualidade magnífica , seus projetos são incríveis parabéns 👏🏻👏🏻👏🏻
Muito obrigado 😎
Wonderful....
Love from Bangladesh ❤️❤️❤️❤️
Thanks brother, cheers from the Philippines
Guy is nasty at that! Great job brotha 🤙
🧨🧯🔥
Now i like this 👍
Master is back
You are great bro
Hai from India 🙏😀😀😀
Waiting for bandpass and tower speaker box bro
Thanks Matt.
You have a lot of skills to make something perfect. I have subscribed your video. It's very innovative and interesting to watch till the end without any skip. If I had you as my neighbour then I would have placed an order to make such one for me. Keep posting more n more videos. Lots of love friend.
Thank you Sanju
You videos=amazing chill
Much appreciated, Tom. 😁
I am in India I was very impressed your all videos best👍🤙🤙🤙
Thank you so much Vinayaga😀 cheers from the Philippines!
@@chrclmnky how to buy your products anyway??? My friend?
@@vinayagatvserviceporulur4635 I hope I can ship them at no extra cost but shipping something to India is very expensive.
Bro you are doing great..I like your works very very much😊😊😊😊
Thank you so much 😀
Nicely done. I have a pair of that same JBL subwoofer I plan to have a box built. I'd like to get the same low range into the 20's. Gonna check out some more of your videos
Thanks. 👍😎
This project is also awesome!!
Could you please do one project.
How to convert old 2.1 Creative SBS (Two speakers and one Subwoofer) to single compact vertical tower speaker.
I want to convert it, but lack of knowledge in this area.
Yes, soon. Thanks.
I just watching the video and i can feel the shaking in my leg
😁
Ganda ng box
😃
バスレフポートの仕上がり見事だな!
犬もかわいい♥️
Great job on the build!
Delightful on your feedback. 🥳😎
Nice work mate she's a beauty
Thanks 👍. Yes indeed.
Me gusta mucho el estilo que aplicaste en este proyecto!! 👍 Saludos.
Thank you Jairo. 😁
Min 1:00 the best of video xD, exelente trabajo greitings from México simplemente muy bien, buena caja buen trabajo tetallado y todo sigue asi,
Ayus na naman!
Just wanted to pop in and say very nice work sir. Have a Happy Nude Rear! 😁🤪😁
😂
AWESOME BUILD BRO!!!
😁
Todo muy bien pero al final pusieron una pista de audio el bajo que se escuchaba no era del bafle que se había construido.
te sigo do brasil, existe uma ciência e uma arte nas suas criaçoes, parabens
Thank you very much, Mirinho, cheers from the Philippines! 🤩🥳
thumbs up'ed for the happy dogs!
👍
Beautiful
Thanks Raynor.
Wish I paid more attention in wood shop...LOL!
😂
Me too
awesome work man
Thanks very much. 🤓
Good work👍🏾
Thanks. 😁🤩🥳
Sweet bro
😎
JBL Speaker and Manufacturer Home Made Box It's Very Very Recomended, The Voice Bass a Racing HOREGGG ( Indonesian Version) Excellent & Impressive 👍👍👍👍👍😉😉😉😉😉
Thanks for sharing and glad you like it. 🤩😁
Ur a beast bro... Mad props...
You have Really good skill and thank you so much i love it 😍
I'm glad you like it 😄
Respect from 🇷🇺
Thanks. ,😁
Thanks. Cheers from the Philippines. 😃
Exlent bass bro we good job
Tnx
Very good job bro 👏👏👏👏
🥳
Wow
perfection!
кайф вотет басс улёт аж мурашки по всему телу пошли
😆
What are the dogs fighting about? 😂
Just horseplay time. 😆🥳
To good and cool design
Thanks a bunch
Supper 👌👍
Thanks 🤗
Bro, tengo una pregunta, cuánto te costó la cortadora! Que modelo es.......me gustaría comprar una!🤔🤔🤔 Por favor! O pon link de compra!🤔👍
Circular saw?
Thanks for sharing the video and the information! Very useful (and entertaining with your lovely dogs running around). Excuse me if you already answered this question but what is the radius of the bended part of the port at the front and did you change the total port length? I have read that when using a (large) flange the outer part of the "mouth" shouldn't be used for determining the total length of the port. Ps. Could you also share the dimensions of the box? Tia.!
Many thanks for such inspiring feedback. Curve radius is 12" (outside dimension). There are exactly 12 kerf cuts with 10mm interval. Flanges and such don't really matter to me when calculating. All I do is to measure inner dimensions minus all the displacements when calculating boxes into BassBox Pro and WinISD.
There is a link to the TinkerCad schematics of this box project. 😄
@@chrclmnky Thanks for the reply! Are you sure the radius of the port curve is 12"(inch)? 😄
@@edwinburggraaf8224 Maybe half only. I am really not sure. Like I said, it really doesn't matter to me.
Very good
Thanks
Excellent video as always! Nice test in the end please do more tests like these its kind of fun to see them go that low. Are these subs actually capable of going that low? like Down to 20hz?
Many thanks. This JBL has a factory 28Hz free to air resonance and I calculated the box to be lower than that. Exactly about 25Hz on Bass Box Pro 6 calculation but actual impedance verified by Dayton Audio DATS v3 shows 22Hz. That's 3Hz lower than calculated values.
@@chrclmnky Wow thx! Keep these videos coming bro 👍
Excellent
Thanks a bunch Arjun
Awesome 🔥🔥🔥
Thanks Amit.
Why do you think there was such a difference in calculated vs actual box resonance? I liked the detail of the video, and that box came out very clean!
Hello how you doin. Calculations are somewhat theory level. While actual impedance measurements are so far the most accurate in AC application benchmarking.
Hello Charcoal. I give you my most sincere congratulations for these videos, I'm sorry for the distance, I am writing to you from Italy otherwise I would have come to see you. Question, but if you decide to change my sub, if I email you the specifications, could you possibly design the box for me? I would take care of its realization, I have all the tools in the garage to make it, but I don't have the program for the design. Of course, it doesn't have to be a constraint.
Once again congratulations.
Greetings from Italy
Hello, yes I do design boxes in exchange for $20 PayPal money. There are already many paying customers who got designs made by me. 😁
@@chrclmnky : 👍
Badass bro, great looking Box!
I am a JBL Fanatic, I just got the Partybox 310 and have had their Endurance Sprint Bluetooth Headphones and am blown away by the Sound Quality that JBL Produces. How do you say that Sub sounds overall? Is it loud enough for you? I'm thinking of doing 2 of them in a Ground Shaker 30Hz Enclosure.... If not I'm getting the new Alpine Type X. Just curious on your honest opinion after having owned it and listened to it for a while now? Are you satisfied or would you say it's not quite loud enough, being it only Produces 500 Watts RMS VS The Kicker L7 & Alpine Type X that produce 800-1200 Watts RMS?...
Thanks for the feedback. I suggest to just get B2, DD, DB, or Sundown subs for any builds. They're a bit pricey but worth every money spent.
Buen trabajo
Box Maze 👌🏽
Very nice work. I would love a box like that for my 10" American Bass XFL, it shakes the heck out of my car. Using a prefab Qbomb a variation of the box in this video but if I had that I'm sure it would sound even better. Do you have plans for my particular sub?
Thanks very much for the feedback. XFL's are quite beefy subs and they can deliver right bump. I would love to make them schematics and plans soon.
@@chrclmnky that would be awesome.!
❤️❤️❤️good job
Many thanks for the feedback, Alex.
Super voila xe qui nous manque en france
If shipping to France is just cheap, then I can build you guys awesome car subwoofer boxes.
amazing skills mybig bro😍
🥳
Nice build bro! Do you recommend this subwoofer?
Thanks. No, there are many other better subs than this.
@@chrclmnky what would you choose in this buget? I mention that i live in Europe. :)
@@DaniDogaru any of these are good, DB (deaf bonce), DD (digital design) B2, Sundown, American Bass, Pride, NVX,
Helix, Morel, Hertz
Rockford Fosgate
Parabéns ao profissional pelo capricho, dar gosto de ver 👏🏼👏🏼👏🏼👏🏼👏🏼😍🔊
Thanks a many. 😍
Que ventajas tiene el poner el subwoofer en la parte de arriba ?
Amazing tool
Nice
👍👍👍👍👍👍👍😍😍😍😍
😎🔨📐
@@chrclmnky
Send to me to Indonesia
Hahaha
😍😍😍😍🙏🙏🙏🙏👍👍👍👍👍
@@stardeltaelektro167 ok
Well done btw it's not as hard as ppl think obvi u got to get your measurements & calculations correct that goes without sayin but as long as you take your time when you're cuttin & joining you'll be good... And you SHOULD be taking your sweet ass time this is supposed to be a labor of love take pride in that shit cuz I know it feels damn good when u bust out a build like this that just comes out money it's ALLL about them ohh's & ahh's and anyone who says it ain't, isn't being honest.😜 Bass on dudeman nice work.
Yes, it is very rewarding once you've got your stuff done.
Top 👏👏
✌
Perfeito
Thanks Leandro.
I cannot figure out the Tinker cad software. I only have a tablet. Can you please give me the external dimensions of this box? LxWxH please?
It's cool viewing the schematics on a laptop.
@@chrclmnky I don't have one. 😞
Love your work man, where ya from?
Many thanks. I'm here on the other side of the planet, the Philippines.
@@chrclmnky always wanted to visit there, I noticed you get alot different equipment than what I ever see. The video u posted last week with the ts parameter on that 8", I noticed the subwoofer frame and motor is very similar to my sundown e8v6's
@@mikedavis9923 yes the Philippines is a nice place to tour, let's just hope this Wuhan shiz will end soon.
I agree on the similarities to top brand woofers. I think manufacturers are sourcing their products from same factories in China. These woofers I recently uploaded are only half the cost versus the top brands like Sundown and Skar but same quality and output.
@@chrclmnky link to purchase?
The brand is heavily marketed and sold locally through Facebook groups. There also an online marketplace selling the brand but they jacked up the price.