Ported Box Build for a single 15” Skar ZVX/D2
HTML-код
- Опубликовано: 16 июл 2024
- Got another build for ya 👀 Local guy, found me on IG. Said he already had a design for his sub, but wanted me to build it for him. Nothing fancy, just something that would disrespect his SUV a bit....🤔 I gotcha covered young man. Enjoy...!
(FYI - BACKGROUND MUSIC USED, WAS CREATED BY MY YOUNGEST SON, DYL.) 
Развлечения
Nice to see that you listened to your viewers and stood behind your words and made a demo clip at the end!
valtteri aaltonen - 👌🏾 I try to always respond to my subs/viewers comments. I use to test all my boxes in the shop, but sold the each amp I had and never replaced it. Started testing in my personal vehicles. Finally have a couple amps back on the shelf, so I should be good now.
You son has some nice beats. He's going somewhere if he sticks to his craft!
That’s what’s up 💯 No doubt homie 👊🏽Thank you.
Your work be on point. Keep up the great builds BJ 👍🏾
SprayWayCustoms - Thanks bro. You keep pushing me to step my game up 😎
Hey man do you have a number
Awesome work ever time!!! I dig the terminals. I have used toilet tank bolts in a couple of builds.
James Bond Car Audio - Damn....you wasn’t playing no games 😂 I never really like the way the bolts looked sticking out the box. So I put my twist on it, to keep them flush 😎
Great video, and that's a very nicely done enclosure. 👌🏼
Thank you very much 🤙🏽
That box looking mighty nice. Respect bro.
hippo potamus - Thanks man, glad you liked it 👌🏾
love the attention to detail!!
JJonescaraudio1 - Thanks homie. You know I got that OCD 😂
Man this “IS” the best box building video ive ever seen 👀
Seriously the detail added bewilders me 😂
Thanks big homie 🤙🏽 The customer really enjoyed it and had that sub KNOCKIN!!!!
🔥🔥🔥✅💪 your attention to detail is!!! Like adding the extra mdf to the bottom and port side really made the box come to life!
Up To Bat Entertainment - Your absolutely right. I see things from a builds point of view. I’m all about balance, cosmetic and functionality. Want my builds to look as good as they sound 💯
:30 that's bad ass imo to see all that clean cut wood stacked and ready to be turned into something that booms!
Brandon Lee - Thanks homie 🤙🏾 Glad you liked it and thanks for watching!
Like always great work JB👏👏👏👏
LFernandez919 - Thanks bro 👍🏽
Beautiful work as always keep the goods coming
Realdude rec - I gotcha covered bro! Likewise 👌🏾
@@210Designs gotta fun surprise video coming for today finished to late lastnight to video
Very smart to mask off glued edges before paint. A lot of people wouldn't have thought of that.
H.O.S._bandit - Appreciate that homie. Yea, it was something I had to learn, but it definitely makes a big difference 👌🏾
man what a beautiful box wish i had the tools and skill to do the same
Kwon Pae-Corr - I really appreciate that bro, thank you 💯 It took me a while to get where I’m at now.
This is so badass amazing work 🔥
Sam Whitlock - Thanks bro 💯 Glad you liked it 🤙🏾
Very nicely done well built box
PSE Mentalist - Thanks man, glad you enjoyed it 👌🏾
i need this great box build 👍 really nice detail
Thank you bro, really appreciate your comment. I believe I posted the cut sheet in one of the comments. Someone wanted to build one 👌🏾
i bin watchin this vid for some time now. debating if i should try this build. i finally decided to do it and its not bad at all.. specs worked out great. all i need now is a 2nd batt and the soundtracc in this vid lol
thanks
That’s what’s up homie 🙏🏽 I appreciate your support to the channel and glad you liked this build. It was a popular one for sure. As the soundtrack, my youngest son mad it for me to post on one of my builds. I will let him know your peeped it 👌🏽 Thanks again Ken!
Genius idea with wiring each coil to the box so that you don’t have to take the sub in and out
Thank you bruh!!!! And glad you liked the vid 🤙🏽
THIS BOX SLAMS. Thanks for for design man
You are more than welcome bruh 👊🏽 and thank you for the follow-up comment. Hope you have some fun with it!!
Hey bro can get the design too
Haven't seen a upload in a min, I was wondering what happened lol. Beast if a sub deserves a beast of a box. Another bomb one!
jaz97 - 😂 Yea, I’ve definitely been slacking bro. This was a first build, since I built my wife’s. I’m on (IG@210.designs) more often than YT. Takes longer to build, edit and post. Check me out when you can 👌🏾
@@210Designs Bet will do! I still want to do something for my Xcon 12.
Such precision ,a masterpiece if I must say so myself and I like how you did wiring no need to disturb sub or screw holes nice 👍 work .
Team Chevy - Thanks man, I really appreciate the comment 👌🏾 Yea, I like the ease of wiring as well. Everything done on the outside of the box. Hanks for watching and leaving your comment. I post more frequently on IG @210.designs.
Lol 😅🤣😂🔊 oh shit cut cut cut I got shit falling. B that little test bump sounded good. I can't imagine full tilt 👍👌
The Beige Wonder - 😆😆Yea, when it fell, it scared me at first. Glad it didn’t hit the sub. I can only imagine what this thing will do in some real power. I gotta get a test vehicle ASAP!
What a work of art, one of the best if not the best enclosure ive ever seen for a single sub. I'm very impressed and I wish I could purchase an enclosure like this for my zvx, I'm pretty sure it would.sound amazing..💯🔥
That’s what’s up bro 🤙🏾 I really appreciate you saying that about this build. Customer was very pleased with the output. Sounded great when I tested it in the shop. I build locally in my home town. Thanks again ✌🏽
@@210Designs No problem brother, you have a gift when it comes to building enclosures and it really shows in your videos. I'm actually in South Fla right now so I'm probably to far away from your location but either way I really enjoyed your content and Ive already started checking out your other videos. You make that shi# look easy brother..🔥💯
Roma2189 Villa - Thanks man 💯 Yea, Florida is a big jump from Oklahoma 😆 I’ve been messing with these enclosures for a while now and still learning 🤙🏾 Glad to bear your checking out my other vids. Let me know what you thank. Have plenty of different builds, installs, demos and how to vids on here. I try to share the knowledge with anyone willing to learn ✌🏽
@@210Designs just subscribed to your awesome channel, stay safe bro🔥🔥
Roma2189 Villa - Much appreciation bro 🙏🏽 I’m slow to post my vids, but have more coming.
Ending the video playing Z-Ro makes the video 10x better
No don’t bro 👊🏽
Oh and your bass music pumps 😏😎🤘🏻
Christian Ackerman - That’s that old school music. Z-RO our of Texas 😎
This work is really nice, so precise! You will make me do a nother box! 😅😅
fruttix - Thank you, I appreciate that. Didn’t mean to create more work for ya bud 👌🏾
@@210Designs Ijust triad to make my first own subwoofer box, sealed box for 2 jl audios 12w7ae... But I dont have finitions like you, i want to larn more to do a best work.
fruttix - That’s what’s up bro! Glad to hear you out there trying. I share my knowledge to help others learn. I’ve come along way myself, over the years. Stay at it 💯 If you need any advice or tips, check out some of my previous builds. I try and explain my process in each vid. Or just post questions. I do my best to respond to them all 👌🏾
Should be making boxes for car audio museum's! Always build them the right way and clean!!!
Thanks big homie ✊🏽 That was an amazing compliment and I really appreciate that. Thank you for watching!
@@210Designs you make art out of wood but most of all you take pride and exceed customer expectations by what you do. Thats rare in today's day and age. You deserve the compliments coming your way👍
@@BangingCamry - Thank you bro! I’m glad to see it reflects in my builds. I definitely take pride in what I do and giving each customer that custom quality, at a fraction of the price. Thanks again man!!!!
Very very nice...i love work like this
leonisreal - Thanks bro, glad you liked it 👌🏾
@@210Designs how do you like the skar zvx ? I was thinking of getting a pair ...do they get loud ?
leonisreal - I’ve never personally owned this particular model, only built boxes for them. Very well built, get loud and low!!!
Good as always
Thank you 🤙🏽
Hope to build boxes as good as this someday
Thanks bro, I’m sure you can do it 🤙🏾
Badass man.. nice build
TexasBass210 - Thanks man!
@@210Designs hell yea man straight bumping that zro . Got love for the Texas bro ..
TexasBass210 - That Texas music slaps the hardest 😎
@@210Designs hahaha you aready know brother. Haha .
thumbs up for the home grown background music
Brandon Lee- Thanks man, I’ll be sure and let my son know 💯
I use 3/4's birch, and glue the entire surface of the speaker mount.
NO need for a 800 pound box, my birch box is beautiful as well.
Just made my own for my american bass 15 inch.
17 inches tall
28 inches wide.
My bass port is like 3 inches or a little more. I tuned it to get decent lows, but also get really good mids, and highs in regards to sub notes.
Davichan - That’s awesome bro 🤙🏾 I bet it gets down for sure. Any vids posted, that I can check out? Yea, Birch wood is definitely lighter and a lot easier on your vehicles suspension 👌🏾
@@210Designs I'm waiting until tomorrow for my OFC 0 gauge kit, just got my scar 2000. Upgrading from a 12 inch massive sub, 500 rms. Also built a box for that.
But I'm ready to upgrade haha. It's gonna barely fit in my toyota corolla trunk XD
I'll upload a video once it's banging and I got it all hooked up for sure.
Davichan - That’s what’s up man. Gotta love those upgrades. Nice to see you out there running different brands. Too many not to 🤙🏾 I’ll definitely be on the lookout for that vid and more to come.
Aí sim é uma caixa bem projetada !!
Cristiano riqueforcsaudamor - Thank you! Glad you liked it 👌🏾
Ohhhh that sub puuunches lows veeeery nice 😱😱🤤🤤🤤🤤
Christian Ackerman - Yes, it is a monster for sure.
Fkng beautiful!👍👍👍👍👍
Thank you very much 🙌🏽
Cuuuuuuut.... I got shit falling. I'm on Amazon, coppin' 1 now💪💪💪💪💪
Rock solid video man. How many cubes is the Box oh, it looks small in the video but you would know better than me. I've got a zvx V2 in a custom-built box at 3.6 cubes and tuned to 32 Hertz. I've been considering getting a bigger box built.
StinkyArmpit Bass - Thanks for the comment man 👌🏾 Box should have been right at 3.8cf/net, tuned around 34hz. Plays a relatively flat response, so output level is almost the same throughout the bandwidth. Yea, it looks small, but it’s definitely solid.
Wow amazing...
STEPHIN k.s -Thanks bro, really appreciate that 🤙🏾
Glue runs get me all the time on skinner ports. Hate when I can’t clean it up.
Steve Davis - Lol, that’s exactly why I started. Using tape. Also why I started painting before assembling, those hard to reach areas. Then all I have to do is touch up 💯
Beautiful build as usual. By chance you got any dimensions you can message me. My buddy had a frankenwoofer built from a zvx15 basket, made for me as a gift and it’s on its way so now I just gotta build the box. Last box I built for a 15 was a T-Line and that was a slamming beast that busted my windshield 😂
Jake Welsh - Appreciate the comment man and thanks for watching. I should have these numbers written down at the shop. I’ll post them later this evening for ya 👌🏾 If you have any vids of that t-line, I’d like to see it 👀
210 / Designs let me see if I can find a video. I’ll shoot you some photos of it. I switched phones so I’m still finding videos and pics trying to upload
Jake Welsh - Good deal, thanks man 👌🏾
210 / Designs I replied to the email and posted pics and video. Sub was a
Ampere Audio 3.0 15 v2
Jake Welsh - I’m on it 👌🏾 Thank you!
I just stumbled across your channel, gee incredible what you do.
Keith Citizen - Glad to hear that 🙌🏽 and thank you for watching. Just out here having fun with my hobby 🤙🏾
An amazing piece of art!
Could this box be used with a sundown zv5 15?
Thanks.
Im looking to do it by myself but don’t have any ideas of measurements of the box that I need
Thank you bro, I really appreciate that. Yes, this box will work just fine with that sub 🤙🏽 I found a design direct from Sundown, that will work for your sub as well.
sundownaudio.com/x-z-ns-15in-single-sub-enclosure/
@@210Designs thank you so much!
Question, do you have the design or measurements for this box that you made? I love it! It looks stunning!
Thanks.
Or do you sell the blue print?
Or do you l ow of a really cool box design also with the specs for a sundown zv5 15( single)?
Sorry to ask too much
Just really interested in getting one
Thanks
Keep the amazing work!
@@cristhiandoblado2257 Thank you very much and glad you liked it. I don’t sell my cut sheets, their free for personal use. I don’t do blue prints, like the one I sent you. I’m old school- pencil and paper, with hand written specs and box drawing 👌🏽
@@210Designs i understand, really appreciate your response!
God Bless
@@cristhiandoblado2257 - Anytime bro, thanks for watching and reaching out. If you decide you want my box info, just email me. (bj.hammon@yahoo.com)
Nice!!!
Doc.Cali Thanks!
Ik you posted this a long time ago but I was wondering if you still had the measurements I’m about to build a box just like this one for a customer and was wondering what your measurements are so I can go kinda off of what you have
Yessir, the cut sheet is listed in the comments below. Scroll down to G-SAV, I posted there. Had several people contact me after they followed the cut sheet, they all loved the performance. Have fun with it bro 🤙🏽
That box is clean good work do you build and ship out boxes as well
Niko Mango - Thanks man I appreciate you watching and leaving a comment. Unfortunately, I’m currently only setup locally. Trying to get everything rolling, so I’m able to ship 👌🏾
Need few coustom boxes if do
I need this.. got a ZVX-15V2 on order
Amazing sub 👊🏽 I should have the cut sheet for this one. Just email me 👌🏽
What's the external measurement of the box? I love this build
That’s what’s up bro 👌🏽 Thank you. Just shoot me an email and I’ll send you the cut sheet. bj.hammon@yahoo.com
Could u make one or give some specs on what I should do for a box for my vxf 15
The specs are posted on G Sav comment 🤙🏾 below.
Will anyone send me a cut sheet for this build really would like Enclosure to be 20 x 22 x 24 ? Just taller than width and length if anyone has something
Not sure how I missed your comment bro 🤦🏽♂️If your still interested, just email me 👌🏽
Yea mane !!!!!!!!
Fifthflo Basement 😎
Do you do pocket hole joinery in your sub boxes?
Up To Bat Entertainment - No sir, not yet. Going to try them on my next build 👌🏾
I'm very close to purchasing a zvx and building this box
H.O.S._bandit - You won’t be disappointed 🤭 Very well built and priced right. Be sure and post a vid when you get it finished.
Love your work wish you could have done my box for 2 sundown x12
Thank you very much 🙏🏽 Glad you liked this build. Yea, if you were local in my area, we coulda gotcha fixed up. Those are monster subs!!!!!✊🏽
@@210Designs yes sir I’m in Dallas tx and you help me on IG I ask you about wired my subs up on just one voice core! Cause I have two of the JP23S amp!
@@hangingwitthabrowns - My man 👊🏽 That’s what’s up. Sorry about that, it’s hard to keep with everyone’s social media platforms. Definitely no disrespect homie 💯 Jeep me posted on your setup. Would love to see it in action, when you get everything wired up.
@@210Designs I will buddy waiting on my box getting build
How many cu ft is that box after sub and port displacement
andy sims - I believe it was right around 3.5 👌🏾
Drilling those holes at an angle saved my project man! Always measure your actual cutout🤦🏽♂️
Jeremy S - Yes sir! It makes a big difference.
@@210Designs why do we do that?
Luke Hollosy - Drilling the mounting screws at a slight inward angle, will give the screw more wood/material to pass through. Which will give added subwoofer mounting security, when screwing into place 🤙🏾
@@210Designs it's going to take a very large angle before that screw is able to bite any more material... Seems pretty negligible. and honestly those wood screws should be just fine by any means. especially since the subwoofer is on top the only thing those screws are really doing is just keeping it in place. They aren't even weight bearing screws.
Seth H / Okay, thanks for your input 🤙🏾
Its a pretty lookin box, Can you tell me ur dimension thanks ..
Bong Taoke Kjoong - Thank you 👌🏾 I posted the specs under ARG-
“G Sav” comments listed below. Thanks for watching!
Do you know anywhere i can get a list of sizes needed for this build but for the 12inch?i want to build my own and cannot find box specs anywhere..
Man that’s a good question. Skar doesn’t even have one for a 12” version on their website….smh. They do have the specs/requirements for one tho. You would need to plug the numbers into a box building program. I use this one when I’m double checking numbers. Built several off it 🤙🏽
www.the12volt.com/caraudio/boxcalcs.asp
www.skaraudio.com/collections/zvxv2-subwoofer-series/products/zvx-12v2-12-inch-car-subwoofer#judgeme_product_reviews
@@210Designs much appreciated
@@ronnydisalvo80 anytime 🤙🏽
What did you paint the inside of the box with
I used flat black paint, out of an aerosol can 👌🏾
yo u think this build will work with my american bass 15 inch xfl 1544?
liljuanito _ It I might man. Need to print off each subwoofer’s spec sheets and a side by side comparison. Be sure and check the recommendations on box tuning and Fs.
It'll work. You can take a 500 watt sub and put it in a big box and get good results. Depends what you want.
The real thing to worry about is going BELOW the required. Above it ain't too big a deal really. Most people get huge custom box's built.
Question b4 I begin my build.. why is 3/4" most popular when 1" would be more sturdy, requiring less bracing, etc.
Brandon Lee - Yrs, 1” would be more rigid, repulses bracing. However, 3/4” is a common material thickness,when using building materials. Not to mention the added weight. Boxes built out of 3/4” mdf, birch or plywood, will be strong enough to hold 99% of all subs, if braced properly 👌🏾
210 / Designs I do framing work for a living I was going to purchase mdf but you’re saying 3/4 plywood with good bracing is just as good? Because if so I’m taking some scrap plywood from work tomorrow
semaj Keaton - Ig it were my personal box, I’d build it as cheap as possible 😂 I’ve used all types of materials and even mixed them together the same box 😆😆 Called it Frankenstein. 1/2”, 3/4” mdf, birch and plywood. Anything I had laying around the shop, cause I was broke that build! It’s posted on my IG and YT. Yes, if you brace it accordingly you should be fine man. Before you tell anyone what it’s built out of, play it for them first. Mental aspect will play a part in judgment, but the ears don’t lie 💯 Have fun with it bro.
Brandon Lee I used 1” and my box was loudest in town no joke
@@210Designs Thank you very much for sharing your expertise. Man I love technology! (it wasn't around during my youth either)
Bro i want this box measurements...
Do you have all the measurements of all the pieces you used? I just purchased 2 of the Skar ZVX-15V2 for my daughters car. So I need to build boxes for them. If there is any way you can send me the info that would be awesome!! Thanks
I have the cut sheet for the main box, not all the outer pieces and double walls. She putting (2) of these monsters in her ride…Deezamn! Be sure you have her invest in some hearing aids for later 😆 These subs are no joke. I can email you their box info, just hit me up. Thanks for watching and your comment 👌🏽
(bj.hammon@yahoo.com)
Hahaha I told my husband I think 2 is to much!! But he’s all about the bass! He has a massive truck built when he was younger. I will shoot you an e-mail! Thanks 😊
@@rachelmcgraw4987 😆😆 I totally understand. As husbands we want everyone to have the bass we do, even if it’s not our vehicle 🤷🏽♂️ Okay, I’ll look for the email. Thanks.
@@210Designs will that enclosure fit in a mercury marquis
@@blackblack9276 Should, they have huge trunks. I’ve built 2-15s and 4-12s for a grand marquis. (*both those vids are on my channel). But you should probably put a measuring tape on it just to be safe 👌🏽
What does he mean by eliminates removing sub wiring each coil individually??? Im confused
Nvm
Dr4620 - Ny wiring each coil independently to a terminal post, if the customer decides to the sub at a different ohm load (example: from 4ohm to 1ohm) He can do this without removing the subwoofer from the box. It can all be done at the terminal outside of the box 👌🏾
I have a box building question. I understand sub specs if I were using just one sub, BUT what happens to the recommended specs when using 2 subs? Double the specs just as we double the internal airspace?? Do we double the Port Area too? Please don't guess whoever answers, am looking only for facts, much appreciated car audio pros. (About to build my first box and have been dabbling in Sub Box Pro and Win ISD.)
Brandon, just now getting to your comment bro...my bad 😔 I’m locked into a complete build/install currently. Yes, subwoofer specs are for a single woofer. So you are correct to double the air space listed for each added. *Keep in mind you can +/- this number a bit and still be fine. I use factory specs as a guideline when designing my enclosures. Port area is based on the box net internal cf. *Good rule of thumb for slot ports is 12”-16” port area (WxH) per box cubic foot. This will keep you solid 👌🏾 Tuning is based on the port length. I personally don’t do blue prints, because my designs are free when I have time 😰. Old school pencil and craft paper 😆 But I sketch out the box, specs and include assembly order. There are a lot of reputable people that sell blue prints tho. Type in CAF (car audio fabrication) on RUclips and it’ll pop up. Also, be sure and watch his vids, very helpful in anything car audio related. Plus he makes it easy to understand 👌🏾
What's the cubic feet and what's it tuned to?
Senior XJ - Sorry for not responding to your comment 🤦🏽♂️ Slipped through the cracks. Just under 4cf/nt. Tuned around 32hz.
What's the overall measurement of the box please
Shoot me an email (bj.hammom@yahoo.com) and I’ll send them. If not, it should be somewhere in the comments 👍🏽
I’m going to be running a Skar 1500.1 for a ZVX15 D2 and a Skar 1000.4 for mids&tweeds any suggestions on the best battery to run my system
That sounds like a monster setup 👊🏽 with all great products. *I didn’t know Skar offered a 1000.4 amplifiers now, I gotta check them out. I’m a big fan of getting the foundation (electrical) solid over everything else. Based on your setup, I would start with the upgrading your starting battery under the hood first. Go with the largest AGM they offer for your vehicle. I personally run XS power in mine and our customer’s as well. They take a beating and keep performing 💯 If your system still craves more juice, then look into upgrading your stock alt to a HO alt (240 or 270) either one should be more than enough. I like to use Mechman or Iraggi 👍🏽 FYI - I’m currently running a 1500.1 amp on 2-15s and a 250.4 amp on 10 loud speakers my work truck. XS power battery under the hood and a small XS750 in the rear. Stock alt and I have 0 voltage issues at 3/4 tilt 👍🏽 I’m on IG@210.designs for quicker responses. Hope this info helps bro!
@@210Designs My Man!!, which AGM you have under the hood, and I ordered a mechman 270 should be here tomorrow, and tht skar is the RP-150.4 I bought for $187
@@user-qt5jc2ct7w That’s what’s up 👊🏽 My truck is a 2000 Chevy, extended cab and it required a XS-D3400. I posted the link to that build below 👇🏽 Glad to hear that about the HO alt. Electrical is slept on in a build, until problems start happening. Just because it’s not seen…but critical in a build 💯 Okay, yea I’ve installed that model amp for a customer before. Very solid power at an amazing price! Hope your install goes well bro. Feel free to hit me up if you have questions 🫡
instagram.com/p/Cq8M6l_M2wb/?igshid=MzRlODBiNWFlZA==
MAN I wished you could build tht box for my SkarZVX 15 D1
I’ll pay the shipping bruh😂
What are the specs for that box . And how many cubic feet is it
All that information should be in one of the comments listed on here bro 👌🏾
Lol i got s$$@ fallin priceless.🤙🤙🤙🤙🤣🤣🤣🤣
Lil James James 😂😂😂😆
@@210Designsyou should visit the xs batt competition july 13th and yes ima become a dealer i hope
Lil James James - Where is it? Your gonna be a dealer for all companies pretty soon 👌🏾
What’s the box tuned to and can I have the blueprints? I want to build something like this.
Should be around 33hz. A complete cut sheet is listed under “G -SAV” comments on here 👌🏾 bro.
@@210Designs could you design a box for a skar vxf 15 d2? Could you tune it to 30 hz or so? I want it to perform well on lows and high bass. Just a overall good box.
@@ampguy6920 - The VXF 15 will perform great, using this same design. Tuned at 33hz, which will play the lows with authority. Box is 4cf/nt., so the (+).75cf in this box won’t even be noticeable, based on the recommended 3.25cf/nt. for the VXF 👌🏾
@@210Designs whats the external measurments when its finished this will be going into the trunk of a 2004 camry le
@@ampguy6920 -Should be: H18”xW34.75”xD20”
Where at in Ok? how much to build one of these??
Okmulgee. An enclosure like this would run about $550. I’m currently booked through June 2023 🤙🏽
What are all the measurements for this build?
Thanks for watching! Email me 👌🏽 bj.hammon@yahoo.com
Wats price for box 15 inch digital designs 9500 series
Niko Mango - Not real sure bro. Each of my builds are priced differently. Vehicle, material, type box and any extras.
Can I get the measurements for this? Or like a blueprint?
A.R.G Productions - I’ll see what I can find for ya 👌🏾
210 / Designs thanks man! I’d love to build this for my Skar ZVX 15d2 I just got! I have a smaller box for it but I need to build a new one!
A.R.G Productions - Totally understand that. I should the cut sheet written down somewhere.
210 / Designs much appreciated
A.R.G Productions -
3/4” material
33hz
60sq”/port area (4” wide port)
*(45s and bracing as needed)
Assembly order:
Bottom: 34”x20”
Back: 34”x15”
Left: 19-1/4”x15”
Right: 18-1/2”x15”
Front: 29-1/4”x15
Front L-port: 14-1/2”x15”
Rear L-port: 6”x15”
man i built my first box last weekend out of plywood for my sdr 15 and it suckksss lol. that thing is rattly as hell. planning a new build using mdf
Congrats on building your first box bro 🤙🏽 Just use it as a learning curve for you next one. Figure out where you need to improve and you should be good. I know my first one was one to laugh at, but it got me to where I am today 🤝 Keep pushing!!!!
@@210Designs thanks man. I cant wait to build a new one
I have 2 skar vxf 12 2 can someone give me the demension of this box ported please
They will need more infernal than that bro. Need to know your maximum dimensions of the area the box will be going. Plus tuning, sub and port locations.
H-16x w-40 x l-18 port 40hz
Where do you get your wood from ? Did you cut it or have it cut ?
rowan sykes - I buy mine from Lowe’s and Home Depot. I buy full sheets (4’x8’) and cut them myself at home. I measure out and cut it in half, using a skill saw. Then I can handle the sizes and use my table saw to get my exact cuts. Hope this helps 👌🏾
Do you have a store or a shop ?
rowan sykes - No sir. I do these builds in my spare time, when I’m not working at my regular job. It’s a hobby of mine and I build for local customers, in my home town.
210 / Designs I’m local San Antonio right?
rowan sykes - The 210 throws a lot of people off 😀 Im in Oklahoma bro.
What are the sizes for the box
Marvin Reyes - Dimensions are in “A.R.G Productions” comment 👌🏾
What is the herz man i need one box for my 15 zvx but tone 32 herz
This box was tuned right around 33hz 👌🏽
And the out sides really need to be double thick...
Yoo bro nice work can U do a vid with the measurements I wanna make 1 for my car
I believe I have them written down in my notes somewhere. Built this one for a customer some time back. Shoot me an email and send them over 👍🏽 (bj.hammon@yahoo.com)
I sent U an e-mail
@@ignZZ Bet, I’ll get that info to ya when I get off work today 👍🏽
@@210Designs Np bro
@@ignZZ Just sent it fam👍🏽
How can I get a hold of you to do a build for me I'm from the 210
Thanks for watching bro, but I’m located in Oklahoma 👌🏾 210 dates back to pagers 😆
Oh okay dang that sucks
What is the cubic on this box
kristina maharaj - 👌🏾 I posted this box information, in a previous comment below. It’s under:
G-SAV or A.R.G. Production
Whats the dimension height width depth
Wormsthatdude - It’s listed under G-SAV comments 👌🏾
Daamn! What a sub! 😱🙈
Freaken that box probably like 3-$400 🙈
Christian Ackerman - Sub is a beast. As for the box, you gotta talk to customer on that 🤷🏽♂️
how much would something like this cost ?
Around $300
Check out his IG For more demo of this beast. Knocking shit off the walls!!
It really needs a square brace inside the support all the middles of the box bro that sub will make that box flex still I built my box for my single twelve just like that lol
I’m confused bro. We’re you saying this box needed thicker walls or the one you built? Can you please clarify this for me.
@@210Designs did you ever have that problem lol I didn't think the skar is that powerful the box I built is the same besides it's not a L port a guy I knew said zvxs don't like L ports idk about thay.. but I never had this problem before..
@@210Designs do you recommend L port for skar zvx 12?
@@jacobfarrara5579 - No issues with that box or sub. Stayed in contact with him and he absolutely loved it. Never heard anything about L-shaped port issues either.
My box does I guess because it gets so violent the sub flexes the mdf on the parts of box where it's 1 layer thick I have never seen anything like it before that sub has been literally tearing everything thing up around it even the enclosure it's only on the lows when the x max gets real
Is that a big built to specs
Yessir 👌🏽
Literally just bought this sub and want this exact design! Do ya have the dimensions ? Or is it in the video 😂😂😂
Awesome sub! The dimensions are listed in the comments 👌🏾 Let me know if you can’t find them.
Just finished this box yesterday and now currently tuning the amp and I tell you what...the fucker slaps insanely good with this subwoofer. Def not 4ft🤦🏻♂️😂
@@damonj.18 - Glad to hear it worked out for ya man 👌🏽 Definitely a box that performs.
@@210Designs yessir thanks for the info! this box is legit perfect, Have you thought about making a box for inverted... with the zvx?
@@damonj.18 That’s what’s up 👌🏽 Glad it worked out for ya bro. As for the inverted , I’ve yet to have a customer of mine want one. Guess it’s my area 🤷🏽♂️
Would you build one of these for commission?
Sorry bro, not at this time. But thanks for asking 👌🏾
Is this sub 1ohm or 2ohm
Man…I believe it was 3ohm
Can u build this same box for me
James Vickers - Sorry, but I only build locally in my area. But thank you for watching my vid 👌🏾
What’s the specs on this box bro??
DnoDaBarber - Right around 3.8cf/net and tuned around 33-34hz.
What's the cubic ft and what's it tuned to
I’ll have to check my notes, when I get back to the shop 👌🏽
Thanks I appreciate. It I built a box for my zvx 15 but I feel it may be to big
@@jeremycrank9916 - Gotcha 👌🏽 I kept this one pretty close to manufactures specs and it performed great. Had several people build this one for themselves and they all seem to like the performance.
Wit port displacement and woofer displacement my box is 5.2
@@jeremycrank9916 W34”xD20”xH16.5”
Right around 4cf/nt tuned around 33hz
Whats the volume and port area/length
Seth H - All that information is listed under (A.R.G. Productions) comment 👌🏾
@@210Designs thanks👍
@@210Designs if i was going to use 4 of these in a non wall build, that port area would work? 240sqin? 60sq per?
Seth H - Yea, you should be good with that. A good average for slot ports is: 12-16”sq”/per net box cf 👌🏾
@@210Designs welp, 18 cuft and 240 sqin is HUGE
How much for a build like this?
Marshall Reede - I think he paid $185 for this one. It was a young man working two jobs 🤙🏾
@@210Designs Awesome, well worth the excellent work you did! I'm sure the young man is thrilled. I sure wish there was someone in my area that had your skills!! Great work!
Marshall Reede - Thank you sir, I really appreciate that man! I try to not hit people over the head with my prices and make sure they always get more for there healed earned $. Each build comes with a custom t-shirt, window decal and wristband 👌🏾 Just keep looking bro, I. Sure someone in your area is building. I’d check IG and FB.