Sub Up, Port Back, Kerfed Slot Port Stained Plywood Subwoofer Box
HTML-код
- Опубликовано: 28 авг 2024
- The very long awaited build by many is finally live and direct! The double baffled plywood top mounted subwoofer box with kerfed L ports and kerfed front baffle. Made out of a very expensive Santa Clara marine plywood, exclusively sold at Wilcon Home Depot.
This is a single 12 inch enclosure for the huge Category 7 CSW12-1K XMAX subwoofer! The magnet of this subwoofer is literally almost the diameter of the cutout and weighs about 20 kilos. This enclosure features a kerfed port, and another kerf on the front panel corner, double layered baffle including flush mount, and a beautiful custom dark stain.
If you are interested about the box dimensions, head to this link to TinkerCad schematics: www.tinkercad....
Finished the box with very dark oak oil wood stain and topped it off with polyurethane varnish to protect the subwoofer enclosure from all kinds of elements.
I am glad I hit the appropriate final tuning and impedance for the box which is 30.24Hz @ 1.51 Ohms on the Dayton Audio DATS v3 and has an acceptable effective bandwidth of 23Hz to 46Hz range.
All panels were screwed down the pocket holes for the upper panel to make them invisible. Lower panel is screwed the traditional way because no one can see the screw heads down below the box.
Assembly time and here goes lugging the very heavy Category 7 CSW12-1K XMAX! The monster of a subwoofer weighs about 20 kilograms, yes that heavy.
I think that is all for today's little show and I hope you all like this project. Let me know what you think by commenting down in the comment section. Thanks and have a nice weekend to all of you.
![Oasis - Oasis Live '25 [Official Trailer]](http://i.ytimg.com/vi/gol_JnuEtKM/mqdefault.jpg)
This men born on the earth only for make best subwoofers in the world 😎
Thanks Tina. 😂😎
@@chrclmnkymy pleasure✨✨🙂🙂
Couldnt have said it better myself lol
Apparently you've never been to Columbia, Tennessee.
Solid clean work. If your building boxes and don't have a Router, Brad nailer or a table saw to some degree.......your an average subwoofer enclosure builder. I'm not into the Kreig mounting system. Each to there own on that. Also if you have years of fiberglass & resin application under your belt, your a serious enclosure artist. You built that box way beyond any typical subwoofer xmax can dish out.....unless your running a prototype sub that takes 8-10K watts rms.
Your works are of high quality, it's not about what you are doing but the dedication.
😎🤘
Funny how I play with my doggies the same way when I'm doing box work👍🐕
You are an absolute master craftsman! I've been in car audio for over 20-years, and may have never seen a better built box....I appreciate your attention to detail! Would love to hear it.
Thanks. 😎🧨
I always wonder know how to make curve bend with plywood. Hmmmm 🤔 now I know.
This is the perfect 👌 enclosure I ever seen. What I appreciate in your work is you give a lot attention on every angle. Inside the cabinet. And your work is clean and remarkable.
I really appreciate your 🐶.
Say hi for me.
Good job 👍👍👍
Thank you Fardeen. 💪😎
@@chrclmnky you're welcome 😊
With each video better and better work my friend. Many greetings from Czech Republic.👌✌️
Many thanks, Tom. 😎🤓
This is my favorite box you have built
Yes, mine too.
Awesome work. Really nice hiding the top screws on the inside.
Thanks. Pocket screw jig does a big difference in such projects.
Bro box builder right here.
👍
I like your little friend ! great job too.
Thanks Hardy
Beautiful! I'm looking at building a box and the design is what I've been struggling with. But this is the look. I don't have your skill set but sure going to give it a try.
PS. My dog enjoyed seeing yours on the TV.
Thanks. It is very rewarding to accomplish such projects. 🐩🐕
That is absolutely beautiful 🤩
Thanks
man now it's time for your logo on the works
Yes sir thanks for the encouragement.
Really nice dude. I like the wood color that you use in your videos
Many thanks Laurenz. 🤓😋🎖️
That is beautiful craftsmanship
Many thanks Gopaul. 🥰🥰
Inspirational. Thanks for demonstrating your techniques.
My pleasure!
Awesome craftsmanship!
I wish I had your skills and patience 👍
Thanks a many.
Master builder sir
👍😎
You are a real mater of your trade, wish i could have you make me a box. Keep up the good work.
Maybe one day. Thank you Jean Pierre.
Awesome skills 👌... Must have quite a few years building and kerfing 👍
DIY must be a specific guy with all these tools
Yes
First: beautiful box! I wasnt sure i wanted to try building one from ply, but this looks incredible and I'm betting sounds amazing.
Second: I would love to see your take on a similar shallow box for spaces like a single cab truck. I'd very much like to replace my kicker comp c box with something that looked like this one.
Now im going to go binge watch the rest of your videos. Awesome work! 🤘
Many thanks. Yes i really want to build box for truck underseat. Hoping for a client that wants one.
Amazing Box looks like a art piece
😎
Great job. Very nice box. But as the guys in the millwork shop I used to work at said. If the glue isn't spewing out, you didn't use enough. ;)
Thanks
Oh, about the glue issue, If you have ever work on oil stains, you don't want any glue to stick where you would put stain or else results will be sh*t.
@@chrclmnky I didn't think about the staining. Very true. Would look like sh*t. Thanks.
Absolutely 🤬BEAUTIFUL WORK!!!
Wish I could do 1/4 of this craftsmanship
Definitely just inspired me to buy some tools. I need a custom desk for my studio b/c I don’t want to pay $4000 for one that’s not the way I want it
And would love a new box for my sub, just don’t know how I’m gonna get it in the box and not crush my fingers. That’s no baby sized woofer but my deaf bonce 3515 is 70pounds and if I decide to get the 4515, that damn sub is 132pounds!! Why 😂 need more neo motors, 132 pounds for a single sub that isn’t 24inches or larger is crazy
Wow that is a lot of bass going on there. Good luck and enjoy.
Looks awesome.... can you do a 4th order
Someday, yes
Charcoal Monkey Great box build brother. Beautiful craftsmanship. Cold in America. Minus -10-12 celcius
Thanks Austin. It's 31C here in the Philippines. Just the right temperature.
Stunning looking. Good work.
Many thanks
That's a gorgeous box great job
Thanks Robert. 🥳
This one came out pretty good!
Beautiful!
Awesome job.. looks amazing 👏
Thanks Don 😎🧨
Hello a great video and a perfect job 👍👍👍👍 I loved your work from Germany 🇩🇪 👋👋👋 Kai ✌️
Thank you Kai. 🥳
@@chrclmnky Hello
I want to build the subwoofer. Do you have a drawing for me The link does not work E-Mail kkluge@gmx.de Thank you greetings Kai from Germany 🇩🇪
Good looking box 👍
Thanks a many
Do a pillar build next sir please
Ok sir will do once a customer wanting such build. Thanks.
someones gotta tell me the math to make those cuts for myself, thats SICK
😎
You do some nice work my friend.
Thanks a many, Edgar. 🎱🎯🏆
Nice sub box bro its gonna hit hard keep up the good work
Yessir 🥳
True craftsmanship.. Awesome 👌 a bit worried about the speaker connection.
Thanks GMan
You make it look easy.. great vids mate 👍
🥰😎
what a beautiful dog
Yes he is. 🐕
Beautiful box though honestly!👌👌
Create your logo man !! Love this dude😍
Thanks Denys. I'm working on my logo.
nice box, when you was cutting corners with jig your fingers looked so close to blade!
Thanks. That was normal when doing woodworks.
Beautiful box brobro
Many thanks to you brobro
Damn bro, your home center looks like a library. Excellent job on the box, same color as your buddy. Next make one same color as Lelo?
Thanks CD
Very nice
Thanks 👍🤘
Great sub box build and video.
🔨🥳🥰
@@chrclmnky what was type of wood
@@Preface_stormy marine plywood
Beautiful and I’m a person that doesn’t use that word to freely
Thanks for such nice feedback. 😎🤘
I'm on my way to getting equipment to start making a few of my own projects. I waste a lot of money or I would have been ready years ago haha.
Go ahead and enjoy. Remember to measure twice and cut once in order to not waste material. 🤘😎
I’ve never seen a sub enclosure built so perfectly, I need one built asap, how do I reach you?
Thanks Charlie but I'm located on the other side of the planet, the Philippines.
AWESOME WORK BRO!!!
👌🍺
Saludos amigo desde Querétaro México muy buenas cajas acústicas mis respetos a tu trabajo muy limpio y mucho empeño
Thank you very much for the nice feedback, Iker. Also greetings from the Philippines! Be well and take care there brother.
c est propre vous bosser bien pas mal de matos aussi cool
thank you.
damn bro nice ass box ya skills are top notch👍🏽👍🏽💯💯
😎🧨
Que bien todo lo que ases amigo 👍
Thank you Arley. I am just still learning everyday.
Nice build bro
Thank you. 🤓
Beautiful
😎👍
Felicitaciones amigo, tremenda caja y su fabricación excelente. Saludos.
Thanks very much, Jairo.
I love this. I would like to suggest one thing to all. Yes, why not make all the diagonal in the box as a fully curved shape...? I saying all the diagonal area of the inside box!!. If it made how will be the output of the sound?
I have comment the above in your old videos kindly consider it
Hello Raju, thanks for the feedback. It is all about aesthetics and efficiency. One cannot sacrifice the other.
@@chrclmnky Definitely. But kindly do like that in your future projects
Great work!!!
Thanks Sean 😎
Good job..! I started to cringe when I saw the pocket screws... but you used nice long screws.
Normal pocket screws are not near as strong as square boxed screwed, but those longer screws should do real nice, and no visible filled screw holes. Once again really nice work..!
Thanks. 🥰🍺🥳
@@chrclmnky People love my burn finish box it's nothing fancy, but I mitered the corners and burnt and lacquered it..
Looks pretty cool.. I built a pool table also and did the same finish. I have video's if you'd like to check them out.
@@2869may ok will do
I think you need more screws, I don't think you have enough. Lol wow!!
😎🐱
Beautiful, song at the end killed it.
yessir
i think its time to put your logo in or on the boxes you build
Wow ! Very heavy product....
Yes it is. 👉👍
Que buenos proyectos amigo nuevo suscriptor deberías hacernos unas muestras mas
Thanks Humberto. Have a nice day.
Very nice 👍
How can I get a box made by you? Seriously your work is art
Thanks. I am located here on the other side of the planet, the Philippines.
@@chrclmnky yeah that's OK. Don't matter, how much would you charge to designed and build spl competition box for 2 12" subs?
@@odibryant92 hmu
Woooow...... it's nice
Thanks
does it matter whether you put subwoofer on same face of port or the perpendicular of port like in this build?
Sub and port direction doesn't matter.
really talented✌️🙂🔥
Y
Thanks
That's a beaute!
Amazing building man 🤒
Thanks a bunch. 🥳🥰
You didn't show connecting the wires to inside terminals
Walnut stain? Looks real good 👏🏻
Yes. Walnut darken further using some black pigment.
Nice!
Cara você é o melhor !
Thank you Alex. Cheers! 🤩🙂😎
Do you let the glue dry before you put the pocket hole screws in? Why do you choose to do this? I would think it would be better to do it while the glue is still wet? I want to try this method, that’s why I ask
Pocket screwing will move the panels when glue is not dry.
Qué madera es mejor MDF o plwywood? Me compré una de plywood de pino radiata de 18 mm, espero se escuche fenomenal, lo voy a hacer sellado y lo voy a isonorizar con fibra de poliéster.
Hello brother, how you doing. Your radiata pine plywood is perfect for making subwoofer boxes. MDF is only good when you cover or paint the box. Plywood is perfect if you just stain it and should appear natural wood.
@@chrclmnky me fabriqué un cajón sellado de plywood, pensé que tenía que isonorizarlo con algún material pero quedó perfecto, los graves se escuchan de maravilla, el único inconveniente es que me vibran mucho las ventanas jajajaja y otros objetos.
I like how the Kerfs came out. How many did you do on each turn 12?
There were about 11-12 kerfs 10mm gap in between kerfs
@@chrclmnky awesome thanks
Excellent
wow.sound demo for that box please😊
Soon.
ang tibay nito sir👌
oo. santa clara marine plywood
What did you use to cover the holes for the bottom part thanks, clean work you a beast! 🔥😎
Thanks. Sorry I really can't remember but I think I didn't cover the holes. I did the pocket hole technique so no screws are visible.
This is a clean and perfect project, Hi man i have the pioneer 3003d4 600 watt rms would you mind sending me the accurate box dimesions plus the tunning level ill appreciate a lot man thanks in advance
Hello Arthur I am very sorry for the super late response. Kindly check this video on this link - ruclips.net/video/lTfRfDBzBz0/видео.html The subwoofer is TS-W3003D4 single 12". For the dimensions, there is a link to the TinkerCad schematics down in the video description there. Ask questions anytime by commenting. Thanks!
@@chrclmnkyThankyou so much ill keep in touch
Nice build bro.. was wondering at the end of the video when u ran the test what was the two peak frequencies..
Hello Sir Adam. Thanks for noticing. Two peaks actually read the effective bandwidth which is 23-47Hz, which is actually a poor range. This is cause to cheap and unenhanced drivers like such. Good range reads between 18-60Hz, which Sundown, B2, DD, DC and such expensive drivers do.
@@chrclmnky ah yes thanks for frequency hz information
@@austintyler7991 👍
@@chrclmnky yeah man I look at all of that stuff you do on your test. I appreciate the content. 90's car audio is when I started playing with amps and woofers.. I'm sure you looked at the box when u did the layout on bass box pro or the platform u used to build the box and port. Did it show the frequency peaks and roll off on the software u use?
@@adam_1dizon121 Yes everything is predetermined on the software and there is about +/- 5-15% difference on the actual output. My first priority is the owner's preferred box dimension per vehicle's available space. And from there, I'll calculate to whatever nicest results. I'll spend about 48 hours with Bass Box Pro 6, DATS v3 and TinkerCad just to get the most acceptable box for a particular subwoofer.
love youuuuu
Обожаю этот канал!
Thanks a many. 😎🍖
@@chrclmnky 😏👍
😎 bad ass. Do you use stainless bolts for your terminal posts? Wasn’t sure what conducts the best when selecting the bolts.
Hello Tony, thanks for the feedback. The best bolts would be copper, for the purists.. But stainless will just do fine in most cases.
nice👌👍
🥳
That is a beautiful box. Did you use a website for the box design? Or did you just go for it lol
Thanks. The website I used is TinkerCad, it is a web based CAD application for free, used in laying out stuff.
es pintura o tinta negra lo que le aplicaste? despues lo limpiaste con thinner?
Hello, that was just a dark walnut oil wood stain. I wiped off excess after a few minutes.
Beautiful box nice work 💪just wondering if you can tell me where to get cheap inserts?
T nuts? They are available on most online marketplaces.
@@chrclmnky lol yeah T nuts..... didn't realize my phone auto corrected me. It should have said those inserts. And thanks I will check it out.
Top skills 👌do you do design of box's for people?? I'm struggling to come up with a ported box for a fairly small space !
Thanks. Yes this box is for a customer.
@@chrclmnky sorry i ment if someone sent you the specs of a subwoofer would you do the design so the other person could build it ? I'm uk
@@trev815 for $10, schematics will be provided (Tinkercad) and all the data. Email address link in About section. Thanks.
@@chrclmnky awesome 👌🙏
what are the things called that u put under the bolt were the sub mounts
T nuts
Ecxelente 👌 i💕🐶
Thank you Adolfo. ☺😎😍
สวยมากครับ👍
😎👌
what is the net displacement of the box and port displacement?. thank you!!
There is a link to the TinkerCad 3D schematics in the video description for the dimensions.
this is sub in Vietnam! called 2 bridge 2 di. I don't know what it's called in your country.
Ok thanks for the info.
Hi bro I want 1
🤡