This short video just saved my husband from buying a new washer! I have a GE GTW750 Top Load washer that we bought in 2018. My tube was blue, so that stumped me at first. But, as soon as I blew through it, it reset the washer back to the "Canceled" mode and it started the humming noise again. But after 4 minutes, it started back on the previous cycle. The problem was it was a full load of towels and when it went back to the original cycle, it filled up the water again and overflowed the washer. Unplugged it, pulled out all the water, and plugged it back in about 15 minutes later and it reset. I was able to start a new load/cycle of towels and it started right up with sensing. Thank you so much!
Fantastic news! And good for you diagnosing and repairing it and saving the family! Super mom saves the day! Please share, like and subscribe for more content. 🧰
It worked for me thank you so much. I don't understand why a simple tube cause that issue but once I unplugged it and wiggle it the washer started draining again.
I had this washer and it worked so well for me, my clothes came out clean every time and I loved the flexibility it gave me with the water and how I could add more. I sold it because I really wanted a front loader to begin with and because of the money factor I settled for this one but it really was a good machine. Hope your liking yours
Great video.I blew down the tubing with a mouthful of water then another breath of air to make sure it was clear.I’m guessing the tubing is sensing inches of water in the tub so it would be important to make sure tub is empty when reattaching tubing to circuit board.Ran the Basket Clean after and looks good….Still showing 4,16,18 code after unplugging but I’ll get the full post maintenance testing report from the main operator at some point tomorrow. I rate this a 3 beer job.
I love your comment. I hope it keeps running for a long time. Please come back and share what you learn with the other codes. Definitely a 3 beer job! 👍🏼
Same for me! Wish I'd known to empty the water from basket first. Went back 10 mins later and water was rushing out from the washer lol. Got all the water out and unplugged it for 15 mins and it reset. Now all is good in the world. Also, my tube was blue, not orange. Mine is a 2018 GE Top Load GTW750 model.
@@villagehomeservices6019 l got a GE washer Glass top stuck on code cancel how do l get it off so power button work took pump check orange hole nothing it just makes a noise like it wants to spin and drain
Hardly any videos out there showing how to replace parts on newer GE washers. Most of them are older, very basic machines. Would be very helpful to see that.
@@villagehomeservices6019 Hi there - just came across this video - my washer just stopped spinning as well. Mine looks identical to yours. Were you able to fix your problem? Is there a video for a washer that has stopped spinning. I'm getting error codes of 16, 18 and 27 - but I don't know what they mean. I've done what you suggested in this video but with no luck. Any info is appreciated!
@@rlthornton80 I’m sorry that this happened to you as well. Seems like this model was a wreck from the beginning. Unfortunately I got rid of it and don’t have the user guide any more. I found mine underneath on the left side attached to the side. I would check there first. Then try a search on GE website. My washer worked for a good 6 months then wouldn’t work at all. So I had to replace it. It was only 14 months old and I didn’t buy a warranty. 😩 learned that mistake the hard way. With the quality of units these days you have to budget for a warranty. Free service for 3 visits and after the 3rd visit they will usually replace the unit. I hope you find the j go and let me know what you end up doing.
@@villagehomeservices6019 Thank you so much for your response! Still no luck on my end with trying to solve the problem myself. I did not purchase the warranty either - I guess that was a mistake. My machine is 3 years old now. I'm debating on calling a repair man, or just buy a new one. they don't make them like they used to! Thanks again for your help and input!
@@rlthornton80 In most cases I recommend start with the repairman to see if he could at least diagnose it for a small fee then go from there but I believe this unit has too many issues to keep paying repair fees every 6 months. Would be better to start new again with a good warranty. These days if it lasts past the 5 year warranty with no problems then you got a good deal. Here in Texas all of our friends are having issues with washers. It’s almost as if they are built not to last 🤔 Hope that helps with your decision. And please like and consider subscribing for more tips on money saving projects in the future.
@@villagehomeservices6019 ,,,, that hose was not the problem. I finally found that the board had shorted out. These washers are to fancy. I went and bought a plain Jane washer with no robots in it.
mine crapped out during a storm, been trying to figure it out for a few days. Might take the back and see if the power outage messed something up... currently syphoning water out...
Power outages have been known to cause some problems. Sorry you are having to deal with this. Hope you get it figured out. I would start by checking any fuses.
I don’t have the info on e but you can see it in action in one of my other videos. ruclips.net/video/7ok6BkfdhIE/видео.html Please subscribe if you find my channel helpful or entertaining.
Question…. Just opened mine up, saw the orange tube coming from the bottom of the drier but the other end was just hanging there. Does that connect somewhere? I saw a POSSIBLE place on the circuit board. It’s a black short post with a tiny hole in the middle. Does it go there?
Thanks for the great questions. My machine may be different then yours but I can’t remember if that’s exactly where it went. I don’t have the unit anymore otherwise I would check for you. Let me know how it goes and if it works for you.
Is there any water remaining in the washer after cycles? I noticed after an odd smell coming from the washer that under the basket if you shake it a bit you can hear water sloshing around... Im not sure if this is normal since it seems to still work or if it's not draining entirely? I tried to run the drain and spin and basket clean several times but there is always water under the basket (you cannot see it over the basket...).
Mercedes Gorham I remember this and thought it was odd as well. I think it is part of the design and the fact that most people do laundry every day and use detergent there is no real risk of sitting water growing stuff. I wish I had a better answer for you. I have since purchased a Maytag and have had no problems for over a year. Hope this helps
I have this exact washer for a couple years now and it worked perfect until a few days ago. The cycles keep changing on it's own as if someone is pushing buttons so my clothes never drain properly. Sometimes the buttons just don't work altogether. Any ideas?
Mike, you mentioned about popping out the pump and cleaning it. Do you by any chance have a video turial for it that you can share or do you mind providing an instruction how to do it. Thanks in advance.
GypsyDancer01 I don’t have the washer anymore but for the most part the pump is under the washer. I tipped mine back against the wall and was able to take out the 2 screws holding it on. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
You don’t shake the console to fix the pressure tube… if anything that will pull it off and cause overflowing… you need to put the pressure tube back on to the port where the pressure sensor is located…
I am sorry I do not. I have since moved on from this model as it continued to give me problems. Now have a Maytag that also gives me less problems. I hope you are able to get it figured out.
Anyone know how to get to the belt that makes this washer spin? I can’t figure out how to get to the guts bc the back panel doesn’t come off like older washers
I believe it is on the back of the panel. I do t have the unit anymore but that sounds familiar. You may be able to find a diagram of the u it on the internet. Hope it works out.
The pump filters? I believe they were all removed from the newer models. See this link for more info. products.geappliances.com/appliance/gea-support-search-content?contentId=17426
Did you take the sensor tube all the way out of the washer to shake it? Or did you just disconnect it from the control board and shake it? I just took a shop vac and tried to suck out the tube with it still connected to the washer, and it still did not drain. I guess my next step is to check the drain pump.
Hey Scott I just disconnected it from the control board and shook it out. It worked for about a month for me before I actually had to get rid of the unit. Since then I’ve had two other washers that have failed me. I always recommend purchasing the warranty from here on out. Hope you find what’s terrorizing your machine.
Hello, I have this washer, also not draining but isn’t throwing an error code. It just hums and does nothing. I pulled pump off, there’s 2 not sure what the other is for but neither were clogged. Could it just be a bad pump?
My washer is just like this general electric washer and in the back has a sensor by the drain hose it must have fell out do I just put it back in can you show me the back side so I can see where it goes
Hi. I got rid of this unit years ago.however I would just put it back on connecting part. I If you email me a video I might be able to help you. TexasfunTv@gmail.com
Terry Browning i don’t have the washer anymore but for the most part the pump is under the washer. I tipped mine back against the wall and was able to take out the 2 screws holding it on. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
Kenneth Caldwell hi Kenneth, I don’t have any experience balancing the drum. Might be a call to a technician or hopefully other videos out there with info. Good luck.
We have issues with our sometimes when clothes are heavy on one side. Just pretend that arm is still in there and just load the clothes evenly around the tub. Hope that helps.
Michael Taunton. Hi, I don’t have the washer anymore but for the most part the pump is under the washer. Should be right front. I tipped mine back against the wall and was able to take out the 2 screws holding it on. There are some hoses that are held on with clamps that need to be removed. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
GE washers are junk I have the same issue wont drain. The washer this one replaced lasted for 10 years .The new one 1 load a week for 2 years no exception junk. I'm going to find a older not electronic washer and throw this the trash.
Make sure the lid is closed. Hold it down if you have to. Under the washer there was a technicians manual that has the codes. www.geappliances.com/ge/recall/washer_2016/ Check here to see if your model was a part of a recall.
My Temp/Soil/Spin buttons (GE GTW680BSJ6WS model) sometimes don't work (no matter how hard I press)...is that a motherboard issue and needs to be replaced?
Could be or it could be a button issue. I hope you get it figured out! With over 100k people watching this video I wonder if this unit was lemon from the start….
Hi Edith, GE Washer 26 Error Code Error Code Meaning An out of balance load is detected during the spin cycle. GE Washer 26 Error Code Error Code Possible Causes Uneven load distribution. Excessive basked runout. Excessive basket friction. So you will most likely need a part that keeps it balanced. Call a service technician and sometimes it’s an easy fix if parts are available. Good luck and let me know how it goes. Also please like and subscribe.
I have experienced this "won't spin" issue also! I have also seen dozens of other users complaining about this on other forums. The reason for this problem is that you have put clothes into the the machine such that it is overloaded and/or the load is badly out-of-balance. I spent an entire day working with all the settings and washing about 7 loads of clothes...... the solution is to PUT FEWER CLOTHES INTO THE WASHER!
unplug the unit and let it sit for 10 minutes. Try to check and see what error codes you have and determine if they are related to the tube or not. Yours may be different. In the video I show you how to get to the error codes. Lastly I would try the tube again and if that doesn’t work you may need a professional. I’m sorry I could not be of more help.
I have a question. I have this same model of machine. My problem is that the machine is blocked by an E7 error code, and the solution is to unlock it. but on the internet only appears the unlocking method for Mabe and not for GE, so I don't know which are the buttons that I have to press for 5 seconds to be able to unlock the error code. If someone can help me to better translate what I want to explain here, help! because i don't speak english
Fealo Roberts I don’t have the washer anymore but for the most part the pump is under the washer. I tipped mine back against the wall and was able to take out the 2 screws holding it on. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
Full disclosure this did not fix my washer for very long. It last another week then I decided to replace it. Check for a repair manual that is hidden underneath the washer that has the error codes. You could probably also download the original repair manual from GE
Make Sure You Aren't Overloading the Washer. Assess the Machine's Condition. Prevent the Machine from Vibrating. purchase padded feet or a pad to set it on.... for example I am adding a link to check out. (I haven't used this product and cannot verify its quality) www.google.com/aclk?sa=L&ai=DChcSEwjOuI7gjdb1AhXDFdQBHdiiB6MYABAIGgJvYQ&ae=2&sig=AOD64_2oA_v8JLtpewwVyWg9x3IygXVYqA&ctype=5&q=&ved=2ahUKEwjo2IPgjdb1AhXonGoFHfR3BKgQ9aACegQIARBG&adurl= Cover the Machine With Blankets. Pad the Sides of the Machine. Soundproof the Laundry Room. Small loads would be easiest to start with. If you have the ability to return the Washer and replace it with a less noisy model then that might be your only option.. Hope this helps. Mike
Did you try holding both buttons to get an error code? Unplug unit. Plug unit back in. Press down on the lid to see if the lid sensor is bad and press start.
@@villagehomeservices6019 will try when I get home it’s weird because it will spin to drain just won’t spin to wash the clothes like if it gets stuck but yet again when it’s pouring the water down the lid will just open not sure if it’s supposed to
@@jeanninasilva5309 That’s a software issue. And I don’t have any help for that. Keep searching and maybe there is a video out there or contact a repair person. Hope that helps
I dont understand when you say the panel just pop up and flips over.... I am beating the fk out of this washer and theres no panel with an orange tube behind it
You may have a different model than mine. However If I still had mine I would definitely beat mine too 😂. Behind the top panel are two screws that are perpendicular (straight up and down) if you don’t see those two then it’s a different model. Hope you have some satisfaction however you deal with it. Sorry I could not be of more help.
Приколы
This short video just saved my husband from buying a new washer! I have a GE GTW750 Top Load washer that we bought in 2018. My tube was blue, so that stumped me at first. But, as soon as I blew through it, it reset the washer back to the "Canceled" mode and it started the humming noise again. But after 4 minutes, it started back on the previous cycle. The problem was it was a full load of towels and when it went back to the original cycle, it filled up the water again and overflowed the washer. Unplugged it, pulled out all the water, and plugged it back in about 15 minutes later and it reset. I was able to start a new load/cycle of towels and it started right up with sensing. Thank you so much!
Fantastic news! And good for you diagnosing and repairing it and saving the family! Super mom saves the day! Please share, like and subscribe for more content. 🧰
It worked for me thank you so much. I don't understand why a simple tube cause that issue but once I unplugged it and wiggle it the washer started draining again.
Yes, please show us how to do it.
What ever happened to simple washing machines that lasted 15 years with No issues..
Yes I need help. I’m not seeing orange tube.
Thanks so much! This fixed my washer! There is no information out there on troubleshooting with new GE washers
Awesome! Please like share and subscribe for money saving videos.
Thank you so much! I have been fighting our washer for weeks.
Thank you. Please like and subscribe for more videos!
Thank you! Saved us from a costly repair bill!
Excellent! please like and subscribe for more great videos.. .
Thank you for your help I was trying to figure it out on the Internet and was more confused, this worked and running good now.
Glad it worked. Please like and subscribe!
Worked! Unplugged it, heard some air come out of the tube. Plugged it back in, power cycled the washer and it started to drain!
Awesome please consider liking and subscribing!!! Tell your friends!!
Bro!!!! Ty so much!!! Just blew through that orange tube and reconnected it and it drains!!!
Glad I could help. Please like and subscribe so others will find this video.
I had this washer and it worked so well for me, my clothes came out clean every time and I loved the flexibility it gave me with the water and how I could add more. I sold it because I really wanted a front loader to begin with and because of the money factor I settled for this one but it really was a good machine. Hope your liking yours
It was nice for about 1 year and then had major issues that I could not resolve. Needed up buying another one.
Wow i tried it and it worked for me man thanks! Would have never thought a simple orange tube would work👌🏼
Nice work!
Don't forget to like and subscribe for more great videos....
I don't see a orange tube. But a blue one
@@titopedroso323 it may de a different model. Hope it helps.
God job, bud and thanks for this info!!!!
Great video.I blew down the tubing with a mouthful of water then another breath of air to make sure it was clear.I’m guessing the tubing is sensing inches of water in the tub so it would be important to make sure tub is empty when reattaching tubing to circuit board.Ran the Basket Clean after and looks good….Still showing 4,16,18 code after unplugging but I’ll get the full post maintenance testing report from the main operator at some point tomorrow. I rate this a 3 beer job.
I love your comment. I hope it keeps running for a long time. Please come back and share what you learn with the other codes. Definitely a 3 beer job! 👍🏼
Same for me! Wish I'd known to empty the water from basket first. Went back 10 mins later and water was rushing out from the washer lol. Got all the water out and unplugged it for 15 mins and it reset. Now all is good in the world. Also, my tube was blue, not orange. Mine is a 2018 GE Top Load GTW750 model.
Thank you brotha…. All codes are cleared now.
Awesome glad it worked! Don’t forget to like and subscribe! And share
Very helpful information. Could not find a service manual
Thanks a bunch. Only video on here about this issue.
Please give it a “like and subscribe” if you want more videos like this.
This worked for us! Thanks so much!
Thanks ! Please consider liking and subscribing!
Thank you, that was a great help, great video
mike I literally love you so much
Thanks sister.
Thanks 👍 my problem was the tube, would have never checked that!
Gary T awesome please consider liking the video and subscribing.
@@villagehomeservices6019 l got a GE washer Glass top stuck on code cancel how do l get it off so power button work took pump check orange hole nothing it just makes a noise like it wants to spin and drain
@@ramonarobichaux2774 did you try to hold the 2 buttons to get it into service mode?
would like to see you take the pump out and also show about what you just said about fixing the drain problem
GE washer how to remove pump
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Much appreciated
Genius thanks!
Hardly any videos out there showing how to replace parts on newer GE washers. Most of them are older, very basic machines. Would be very helpful to see that.
My new ge washer just stopped spinning. Working on getting a video for this soon.
@@villagehomeservices6019 Hi there - just came across this video - my washer just stopped spinning as well. Mine looks identical to yours. Were you able to fix your problem? Is there a video for a washer that has stopped spinning. I'm getting error codes of 16, 18 and 27 - but I don't know what they mean. I've done what you suggested in this video but with no luck. Any info is appreciated!
@@rlthornton80 I’m sorry that this happened to you as well. Seems like this model was a wreck from the beginning. Unfortunately I got rid of it and don’t have the user guide any more. I found mine underneath on the left side attached to the side. I would check there first. Then try a search on GE website. My washer worked for a good 6 months then wouldn’t work at all. So I had to replace it. It was only 14 months old and I didn’t buy a warranty. 😩 learned that mistake the hard way. With the quality of units these days you have to budget for a warranty. Free service for 3 visits and after the 3rd visit they will usually replace the unit. I hope you find the j go and let me know what you end up doing.
@@villagehomeservices6019 Thank you so much for your response! Still no luck on my end with trying to solve the problem myself. I did not purchase the warranty either - I guess that was a mistake. My machine is 3 years old now. I'm debating on calling a repair man, or just buy a new one. they don't make them like they used to! Thanks again for your help and input!
@@rlthornton80 In most cases I recommend start with the repairman to see if he could at least diagnose it for a small fee then go from there but I believe this unit has too many issues to keep paying repair fees every 6 months. Would be better to start new again with a good warranty. These days if it lasts past the 5 year warranty with no problems then you got a good deal. Here in Texas all of our friends are having issues with washers. It’s almost as if they are built not to last 🤔 Hope that helps with your decision. And please like and consider subscribing for more tips on money saving projects in the future.
It worked!
Awesome! Please consider liking and subscribing for more helpful videos.
I’m going to try this tonight,
How did it work out?
@@villagehomeservices6019 ,,,, that hose was not the problem. I finally found that the board had shorted out. These washers are to fancy. I went and bought a plain Jane washer with no robots in it.
@@gooutside6055 I totally agree with your assessment on the robots. 🤖 my parents had a robot free WM that lasted 19 years. !!!
Going to try
mine crapped out during a storm, been trying to figure it out for a few days. Might take the back and see if the power outage messed something up... currently syphoning water out...
Power outages have been known to cause some problems. Sorry you are having to deal with this. Hope you get it figured out. I would start by checking any fuses.
Thanks Mike !
Going after the problem right now.
If you dont mind sharing , what Maytag model did you decide on ?
I don’t have the info on e but you can see it in action in one of my other videos.
ruclips.net/video/7ok6BkfdhIE/видео.html
Please subscribe if you find my channel helpful or entertaining.
I got the Maytag commercial washer. Works great. Only had one issue when kids left coins in the pockets.
Question…. Just opened mine up, saw the orange tube coming from the bottom of the drier but the other end was just hanging there. Does that connect somewhere?
I saw a POSSIBLE place on the circuit board. It’s a black short post with a tiny hole in the middle. Does it go there?
Thanks for the great questions. My machine may be different then yours but I can’t remember if that’s exactly where it went. I don’t have the unit anymore otherwise I would check for you. Let me know how it goes and if it works for you.
Can you show another video to show us how to change the pump pls
Is there any water remaining in the washer after cycles? I noticed after an odd smell coming from the washer that under the basket if you shake it a bit you can hear water sloshing around... Im not sure if this is normal since it seems to still work or if it's not draining entirely? I tried to run the drain and spin and basket clean several times but there is always water under the basket (you cannot see it over the basket...).
Mercedes Gorham I remember this and thought it was odd as well. I think it is part of the design and the fact that most people do laundry every day and use detergent there is no real risk of sitting water growing stuff. I wish I had a better answer for you. I have since purchased a Maytag and have had no problems for over a year. Hope this helps
Mercedes did you ever fix this problem?
It still works
Fantastic! Please consider liking and sharing this videos. And subscribe for more cost saving videos.
Please show me another video for don't drain please
Does it give you an error code?
I have this exact washer for a couple years now and it worked perfect until a few days ago. The cycles keep changing on it's own as if someone is pushing buttons so my clothes never drain properly. Sometimes the buttons just don't work altogether. Any ideas?
Hi Gary, sounds like it could be the board. I would have a technician verify it.
You know he's legit because you can hear kids shouting in the background.
thank you sir! Like and subscribe for more legit videos....
Mike, you mentioned about popping out the pump and cleaning it. Do you by any chance have a video turial for it that you can share or do you mind providing an instruction how to do it. Thanks in advance.
GypsyDancer01 I don’t have the washer anymore but for the most part the pump is under the washer. I tipped mine back against the wall and was able to take out the 2 screws holding it on. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
Mike Garcia thank you this was super helpful! I couldn’t figure out where the drain pump was until I saw this comment!
Here’s the pump location
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Having similar issues with my GE Washer. Tried the orange tube and it did not work. Now the lid is stuck closed in the locked position.
Laura Feeley sorry I don’t have the washer anymore otherwise I would try to figure out your dilemma.
You don’t shake the console to fix the pressure tube… if anything that will pull it off and cause overflowing… you need to put the pressure tube back on to the port where the pressure sensor is located…
That’s correct. You shake the tube. And replace it. Good catch Scant.
@@villagehomeservices6019 you just pull the tube off and replace it with a new tube
How did you get to the pump? I took off that panel on the lower corner of the back of the washer and couldn't see where the pump was.
Hi Alex I tipped mine back against the wall and the pump was underneath towards the left side. Hope that helps.
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Pump location
How do you take the pump out
Here’s where the pump is
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Any chance you could show exactly how to pull this off? We have taken out those two screws but nothings morning
GE washer how to remove pump
ruclips.net/video/Pn5z8Kw4FTI/видео.html
There are 4 bolts, not 2 and do you have a video of full process fix?
I am sorry I do not. I have since moved on from this model as it continued to give me problems. Now have a Maytag that also gives me less problems. I hope you are able to get it figured out.
Anyone know how to get to the belt that makes this washer spin? I can’t figure out how to get to the guts bc the back panel doesn’t come off like older washers
Hi Dylan, I don’t remember exactly but You should be able to see the motor from the bottom. Hope that helps.
Does the orange tube connect to the piece on the motherboard?
I believe it is on the back of the panel. I do t have the unit anymore but that sounds familiar. You may be able to find a diagram of the u it on the internet. Hope it works out.
How do you clean the filter and where is it it .
The pump filters? I believe they were all removed from the newer models. See this link for more info.
products.geappliances.com/appliance/gea-support-search-content?contentId=17426
Could you post the pump replacement please
Here’s where the pump is.
ruclips.net/video/Pn5z8Kw4FTI/видео.html
I wish it had of worked for me. Same problem.
Sorry it did not work my friend. Hope you figured your way out of it
Did you take the sensor tube all the way out of the washer to shake it? Or did you just disconnect it from the control board and shake it? I just took a shop vac and tried to suck out the tube with it still connected to the washer, and it still did not drain. I guess my next step is to check the drain pump.
Hey Scott I just disconnected it from the control board and shook it out. It worked for about a month for me before I actually had to get rid of the unit. Since then I’ve had two other washers that have failed me. I always recommend purchasing the warranty from here on out. Hope you find what’s terrorizing your machine.
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Pump check
How can I get the codes for this washer not it manuel
Michael Taunton they should be online. On manufacturers website.
Hello, I have this washer, also not draining but isn’t throwing an error code. It just hums and does nothing. I pulled pump off, there’s 2 not sure what the other is for but neither were clogged. Could it just be a bad pump?
Sounds possible. Not sure if you can test your pump while out but that might help diagnose it. But sounds like your on the right track. Keep me posted
Did you find a fix?
@@MikeyOMillaMane I did, I had a bad pump. Bought a replacement and no more problems.
Fantastic job! Way to save yourself some dough!!!
Likes and subscribe for more videos.
My washer is just like this general electric washer and in the back has a sensor by the drain hose it must have fell out do I just put it back in can you show me the back side so I can see where it goes
Hi. I got rid of this unit years ago.however I would just put it back on connecting part. I If you email me a video I might be able to help you. TexasfunTv@gmail.com
Perhaps a picture of the orange hose would have helped. If you went that far in the video.
I totally agree!!! I was not prepared to film the fix. Only decided to post it on YT after it worked. Hope you got it working.
How do you get out of service mode? I am stuck and now my display doesnt work
Phillip R I don’t have the washer anymore but if I remember correctly you should be able to press any button to get out of the service mode.
Quisiera saber como configurarla
gE
Don’t forget to like and subscribe
Can you show me how to replace the pump .. mine will not drain or spin
Terry Browning i don’t have the washer anymore but for the most part the pump is under the washer. I tipped mine back against the wall and was able to take out the 2 screws holding it on. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
@@villagehomeservices6019 how did you fix it when it stopped spinning
@@donnellp07 mine would spin. It just wouldn’t drain. Cleared the Orange tube and replaced it. And it worked.
Pump video
ruclips.net/video/Pn5z8Kw4FTI/видео.html
I’m always having unbalance issues during the spin cycle... is there a way to fix this without me spinning one to two pieces at a time
Kenneth Caldwell hi Kenneth,
I don’t have any experience balancing the drum. Might be a call to a technician or hopefully other videos out there with info. Good luck.
We have issues with our sometimes when clothes are heavy on one side. Just pretend that arm is still in there and just load the clothes evenly around the tub. Hope that helps.
having the same issue and the machine is just 3yrs old
How can i un lock the controls of my washing machine general electric, please
try holding the start and power button...
Can you show where the pump is
Michael Taunton. Hi, I don’t have the washer anymore but for the most part the pump is under the washer. Should be right front. I tipped mine back against the wall and was able to take out the 2 screws holding it on. There are some hoses that are held on with clamps that need to be removed. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
Here’s the pump location
ruclips.net/video/Pn5z8Kw4FTI/видео.html
GE washers are junk I have the same issue wont drain. The washer this one replaced
lasted for 10 years .The new one 1 load a week for 2 years no exception junk.
I'm going to find a older not electronic washer and throw this the trash.
I have the exact mashine its makung the clicking sound and not draining
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Do you know how to get this model to spin? Also, how do I find out what the codes are?
Make sure the lid is closed. Hold it down if you have to.
Under the washer there was a technicians manual that has the codes.
www.geappliances.com/ge/recall/washer_2016/
Check here to see if your model was a part of a recall.
@@villagehomeservices6019 The lid is completely closed it even locked but it's still not spinning at all. Do you have any suggestions?
@@Shaqueze89 Did you figure out a solution to your washer? Ours isn't spinning at all and we have no clue.
I took pump out it wants to drain but stuck on cancel
I hope you got it fixed. Try to reset the machine by unplugging.
My washer just click would drain but won’t spin…..any ideas?
Check to make sure the lid is locking. I have a client who is having issues with the washer not starting. Turns out that the lid lock sensor is bad.
My Temp/Soil/Spin buttons (GE GTW680BSJ6WS model) sometimes don't work (no matter how hard I press)...is that a motherboard issue and needs to be replaced?
Could be or it could be a button issue. I hope you get it figured out! With over 100k people watching this video I wonder if this unit was lemon from the start….
Mine is error code 26, clothes comes out wet. Anyway to fix it? Thanks.
Hi Edith,
GE Washer 26 Error Code Error Code Meaning
An out of balance load is detected during the spin cycle.
GE Washer 26 Error Code Error Code Possible Causes
Uneven load distribution.
Excessive basked runout.
Excessive basket friction.
So you will most likely need a part that keeps it balanced.
Call a service technician and sometimes it’s an easy fix if parts are available.
Good luck and let me know how it goes. Also please like and subscribe.
Took orange tube out shake it but still don't work cancel light still on could it be lid switch
Power button do not go off
@@ramonarobichaux2774 did you try unplugging it from the wall to reset it?
Hi Mike.. mine is showed Code”17”,is it same?
Good question. It might be. Unfortunately I don’t have the washer anymore.
Where does the tube connect?
There should be a hose connector where it attaches. It is behind the display panel.
I have this same washing machine and it is not spinning help please how can I fix this
Follow the video instructions to get the error codes then let me know what the code is.
I have experienced this "won't spin" issue also! I have also seen dozens of other users complaining about this on other forums. The reason for this problem is that you have put clothes into the the machine such that it is overloaded and/or the load is badly out-of-balance. I spent an entire day working with all the settings and washing about 7 loads of clothes...... the solution is to PUT FEWER CLOTHES INTO THE WASHER!
It worked for a few loads but now it won't drain again. Any suggestions??
unplug the unit and let it sit for 10 minutes. Try to check and see what error codes you have and determine if they are related to the tube or not. Yours may be different. In the video I show you how to get to the error codes. Lastly I would try the tube again and if that doesn’t work you may need a professional. I’m sorry I could not be of more help.
I have a question. I have this same model of machine. My problem is that the machine is blocked by an E7 error code, and the solution is to unlock it. but on the internet only appears the unlocking method for Mabe and not for GE, so I don't know which are the buttons that I have to press for 5 seconds to be able to unlock the error code. If someone can help me to better translate what I want to explain here, help! because i don't speak english
Try pressing the start button and the power button at the same time.
Pls where’s the pump located
Fealo Roberts I don’t have the washer anymore but for the most part the pump is under the washer. I tipped mine back against the wall and was able to take out the 2 screws holding it on. Once that was done there was a lot of sand and debris that came out. Sorry I can’t help you any further and hope you find a video.
@@villagehomeservices6019 was that sand and debris part of the spider arm holding the inner tub?
@@villagehomeservices6019 was there a filter of any kind on it to change ?
@@aunkster not to my knowledge.
Pump location
ruclips.net/video/Pn5z8Kw4FTI/видео.html
how did you know what the codes stand for. These are not in my manual.
Full disclosure this did not fix my washer for very long. It last another week then I decided to replace it. Check for a repair manual that is hidden underneath the washer that has the error codes. You could probably also download the original repair manual from GE
ok, how did you get to the pump?
Katherine Knaul the pump is underneath
Pull the washer out and tip it back against the wall or tip over completely for safety.
Thanks...
My new GE top loader washing machine is too noisy, what can I do?
Make Sure You Aren't Overloading the Washer.
Assess the Machine's Condition.
Prevent the Machine from Vibrating. purchase padded feet or a pad to set it on.... for example I am adding a link to check out. (I haven't used this product and cannot verify its quality)
www.google.com/aclk?sa=L&ai=DChcSEwjOuI7gjdb1AhXDFdQBHdiiB6MYABAIGgJvYQ&ae=2&sig=AOD64_2oA_v8JLtpewwVyWg9x3IygXVYqA&ctype=5&q=&ved=2ahUKEwjo2IPgjdb1AhXonGoFHfR3BKgQ9aACegQIARBG&adurl=
Cover the Machine With Blankets.
Pad the Sides of the Machine.
Soundproof the Laundry Room.
Small loads would be easiest to start with. If you have the ability to return the Washer and replace it with a less noisy model then that might be your only option..
Hope this helps.
Mike
Please like and subscribe if found this to be helpful..
Show us how
GE washer how to remove pump
ruclips.net/video/Pn5z8Kw4FTI/видео.html
My washer not draining
GE washer how to remove pump
ruclips.net/video/Pn5z8Kw4FTI/видео.html
Whats the code for not spinning
I found these codes that might work. E42/E48/E49/E46/E54. Reference site here
homebli.com/ge-washing-machine-error-codes/
Hello, I have the code EA and dont know what it is about, can you help?
I’m not sure what EA means mine only has number codes.
Igual me sale el código EA, pero he intentado desconectando, dejando el botón encendido 10 segundos apretado, y nada.
How to remove pump
GE washer how to remove pump
ruclips.net/video/Pn5z8Kw4FTI/видео.html
What do I do if it does not show any codes just the double lines and it says pause and lid lock that’s it
Did you try holding both buttons to get an error code?
Unplug unit.
Plug unit back in. Press down on the lid to see if the lid sensor is bad and press start.
@@villagehomeservices6019 will try when I get home it’s weird because it will spin to drain just won’t spin to wash the clothes like if it gets stuck but yet again when it’s pouring the water down the lid will just open not sure if it’s supposed to
ruclips.net/video/Pn5z8Kw4FTI/видео.html
What's a f2
I’m sorry I don’t have the washer or code book anymore. You may be able to do a google search to find it. Hope it works for you!! 🙏🏼
I still get the code 4
I don’t know what code 4 is. You will need to search it on google.
You had it exactly in that machine I been searching and no answer
@@jeanninasilva5309
That’s a software issue. And I don’t have any help for that. Keep searching and maybe there is a video out there or contact a repair person. Hope that helps
What 17 code
debbie watson under the washer is another manufacturer manual that will tell you what the codes are.
Mi lavadora ese molo no ensiende
Lo siento
I dont understand when you say the panel just pop up and flips over....
I am beating the fk out of this washer and theres no panel with an orange tube behind it
You may have a different model than mine. However If I still had mine I would definitely beat mine too 😂. Behind the top panel are two screws that are perpendicular (straight up and down) if you don’t see those two then it’s a different model. Hope you have some satisfaction however you deal with it. Sorry I could not be of more help.
Im starting to dislike GE i have the same washer my Belt & sensor went cost 200$ only had the washer for 18 months
this model was a lemon.... there are thousands of people having issues with this model....
This washing machine is horrible doesn’t give u enough water or wash clothes.
How do u fix it when the water isn’t coming out???? We need valid infos pls
Fealo Roberts I suggest you check to see if the pump is bad. Of it is I would replace the pump.