Woodworking Tips and Tricks Using 1 2 3 Set Up Blocks!
HTML-код
- Опубликовано: 5 сен 2024
- 123 set-up blocks are the most versatile woodworking tools you can buy for your shop. I'll show you 25 (or more) ways to use these amazing tools. Amazon and other affiliate links are used in this description and help support this channel.
Videos To Watch Next
5 Tools Every Woodworker Needs - • 5 Woodworking Tools Yo...
Genius Table Saw Jigs - • 5 Jigs You've NEVER Se...
PLANS: www.731woodwor...
Greatest Free Gift I Ever Received: story4.us/731Wo...
Christian T-Shirts faithvalleytee...
Tools In This Video
1-2-3 Blocks - lddy.no/1d06u
Brass Setup Blocks - lddy.no/1d06x
Connection Kit - lddy.no/1d06v
Corner Clamps - lddy.no/1d09z
Small Magnets - amzn.to/3UXuPGb
Large Magnets - amzn.to/3y9Xm1I
Benchmark 12-inch Rule - lddy.no/1d06y
Digital Depth Gauge - lddy.no/1d077
Mag Base for Gauge - lddy.no/1d078
Paste Wax - amzn.to/3USciuY -
No Hole 1-2-3 Blocks - lddy.no/1d070
1-Hole 1-2-3 Block - lddy.no/1d071
11-Hole 1-2-3 Block - lddy.no/1d06z
Bolts for Stop Block - amzn.to/3fBopwb
Other Tools in Video:
Woodpeckers Square - www.woodpeck.c...
Benchmark Double Square - lddy.no/1d074
Starrett Square - amzn.to/3CoB1jf
TrigJig Square - trigjig.us/pro...
Favorite Tape Measure - lddy.no/1d076
Pica Pencil - amzn.to/3dUWQxu
DeWALT Driver Bits - amzn.to/3dXkvxn
Tekton Wrench Set - amzn.to/3UR9jTF
Incra V27 Miter Gauge - amzn.to/3e3VGzL
Rockler Fence Clamp - amzn.to/3rFsPVX
Dovetail Clamps - lddy.no/1d079 (use code 731MICROJIG10 to save 10% off)
T-Track Jig Kit - lddy.no/1d07c
Milwaukee M12 Drill/Driver - homedepot.sjv....
Some other useful links:
Daily Tool Deals on my website: www.731woodwor...
Subscribe to our email Newsletter: mailchi.mp/7e4...
Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodwor...
See my Amazon page for more tool reviews: www.amazon.com/shop/influencer-4e5e1fdd
Join this channels membership to get access to exclusive member-only live streams, discounts, and other perks:
/ @731woodworks
You can support us on Patreon as well and get the same perks plus merch bonuses / 731woodworks
I get my custom stickers and branded labels from Sticker Mule. Use this link and get $10 off your order and I'll get $10 off my next order. Win/win for both of us! www.stickermul...
▼EXPAND FOR TOOL LINKS and INFO▼
Watch Next = 5 Woodworking Tools You Need to See - ruclips.net/video/ctyIvBVA6Lk/видео.html
Tools In This Video:
123 Blocks - lddy.no/1d06u
Brass Setup Blocks - lddy.no/1d06x
Connection Kit - lddy.no/1d06v
Corner Clamps - amzn.to/3dV2HTw
Small Magnets - amzn.to/3UXuPGb
Large Magnets - amzn.to/3y9Xm1I
Benchmark 12-inch Rule - lddy.no/1d06y
Digital Depth Gauge - lddy.no/1d077
Mag Base for Gauge - lddy.no/1d078
Paste Wax - amzn.to/3USciuY -
No Hole 123 Blocks - lddy.no/1d070
1-Hole 123 Block - lddy.no/1d071
11-Hole 123 Block - lddy.no/1d06z
Bolts for Stop Block - amzn.to/3fBopwb
Other Tools in this Video:
Woodpeckers Square -
Benchmark Double Square - lddy.no/1d074
Starrett Square - amzn.to/3CoB1jf
TrigJig Square - trigjig.us/products/micro-trim-square-mts-4
Favorite Tape Measure - lddy.no/1d076
Pica Pencil - amzn.to/3dUWQxu
DeWALT Driver Bits - amzn.to/3dXkvxn
Tekton Wrench Set - amzn.to/3UR9jTF
Incra V27 Miter Gauge - amzn.to/3e3VGzL
Rockler Fence Clamp - amzn.to/3rFsPVX
Dovetail Clamps - lddy.no/1d079 (use code 731MICROJIG10 to save 10% off)
T-Track Jig Kit - lddy.no/1d07c
Milwaukee M12 Drill/Driver - homedepot.sjv.io/5brZG3
(If you use one of these Amazon and other affiliate links, I may receive a commission)
Some other useful links:
Daily Tool Deals on my website: www.731woodworks.com/tool-deals
Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter
Check out our easy-to-follow woodworking plans: www.731woodworks.com/store
Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
Do they still wring together when you wipe off the oil?
@@patrickm1533 Wring?
9p0
@@731Woodworks Wringing is phenomenon that lets you can stick 2 extremely flat, oiled pieces of metal together and have them hold like they are magnets, even though they are not. The hold is very strong. Gage blocks are designed to do this. It let you stack multiple blocks together and use them again and again until you want to break them apart. 123 blocks are basically gauge blocks. Having them come oil and in pairs makes me think you are supposed to be able to wring them together. You basically press and twist the 2 blocks together to get them to stick and you twist them again to break them apart. There are videos on how to do this. Supposedly you can do this without the oil but it doesn't work nearly as well.
As a machinist, I am only slightly offended that you said "machine shop" and then showed a welder. I understand! They say nobody but a machinist knows what a machinist does (and not all of us, either!). Good info! I enjoyed the video.
"I need to hammer something. I know! I will use a precision calibration tool."
I have five of those blocks. This video has been very helpful! I can see a use for them at the miter saw as stop blocks in a jig to attach to the fence. They could easily be setup on a small parts jig on a miter saw such as what I saw you build for your miter saw. I will be building one for my new Hercules 12" sliding miter saw.
I'm from Oklahoma and I have to say, I love that you dubbed it the Oklahoma block! It's awesome and now I have to have one 😂😂 stay safe and Happy Building 💯😁
Awesome video! Ordered 2 pairs right away
I bought that kit a few weeks ago. I really like it. One thing you left out...they are just plain fun to use. Something about the heft and the precision and you know nothing is going to change from use to use.
They are fun! Love having them in the shop!
I work in a tool and die shop and have been using 1-2-3 blocks for decades. The Taylor Toolworks connection kit makes them so much more versatile.
I love my 123 blocks I use them both wood and metal working. Great for set ups. I also have a pair a 468 blocks. Many people don’t know about them either. Both are great and useful.
Funny Matt... I've got a couple dozen 123, 246, V-blocks, you name it, sitting over there on the milling machine. This video just gave me a thousand ideas of new ways to use tools I already have!! Thank you................
I have two sets of them that I use very often they are very handy to have around
I am a production supervisor in a shop that makes tools and electrodes out of synthetic graphite, 123 blocks are a critical tool in our shop. You can’t have too many sets. But this video showed me things I hadn’t even thought of. Thanks!
Another machinist……very well done, have these thanks for some inspiration on how to use 1 2 3 blocks in the wood shop. Also appreciate your outstanding witness. Don from Bella Vista
I feel like if you did half the things on that list with them, they'd end up as (nearly) dedicated things for that job, and then they wouldn't be available for the other uses.
And that’s the beauty of it all, how you use them is up to you
Bought some 3 2 1 blocks years ago from a youtube recommendation. I don't think I have used them once.
I’ll buy them from you.
Well, now you know how to use them🙂
Lol, too funny, but unfortunately, reality for some folks.
I use mine every day on my workbench
This was great work Matt, I've owned this block for about 20 years and I still learned something!
I have 25X50X75 blocks, plus a set of MM setup bars. This has improved my repeatability like nothing else. I also often use them as a square, since they stand on their own, leaving both hands available for other work.
One task I did not see mentioned is using them as elevators, to keep work up off a surface. For example, if I have a board with a feature mounted to it, so that it will no longer lay flat, I can use multiple blocks to properly elevate the work perfectly the same height across the distance. With a little Pythagorean math, I can also put a block under one end, at the proper distance, creating an angle I need for drilling, etc.
Excellent video! I hope the manufacturer is throwing some appreciation your way!
Better than paste wax for setup blocks is lanolin.
BTW, there are different grades, and most GOOD ones are always slightly oversized, so they can be lapped in
Agree these are a must have for any shop no matter what you build. I also have the connection kit from TT and it's worth buying as well.
Just heat treated my first 27 hole set along with some parallels I made, just need to grind them to the final dimensions and hopefully they turn out well.
forgive me if I missed something or if I'm misunderstanding, but why would you use a machined steel block to hold impact bits?
For those who want to… it’s a list of possible not obligated uses
Thank you
I will start testing this by glueing ( or wilding )12 long nuts 3 by 4. Will see if it worth the money
Thank you from Saudi arabia
I had been thinking for a while on how to make a clamp fence type thing that would attach to my Jessem dowelling jig. To make it more like the Dowelmax design where the clamps are built into the unit. After seeing this video, a light came on. I connected two 1 2 3 blocks together and attached them to the front of the jig. I took the screw clamp part off of two Milescraft fence clamps and they thread perfectly through the threaded holes on the 1 2 3 blocks. Works great. Wish I could show what it looks like.
sounds interesting! You can share pics to info@731woodworks.com
Love my 1-2-3 blocks. Thanks for showing the different uses for them!
A tool that will last many years. Thanks Mighty Matt!
I like and use them so much, that I got a set of 2-4-6" blocks as well to augment my 1-2-3 blocks and brass gauges. I can setup any combo from 1/16th to 20" in 1/16th increments precisely. The 2-4-6" blocks are large and heavy. I do not use them a whole lot, but handy to have. Killer to have on hand for setups.
Very cool video thanks for all the tips! Beautiful shop btw are those handcuffs in the back there?
Thank you. Yes, I was an Arkansas State Trooper for 13 years, those are my cuffs I used.
I have seen various makers use these multiple times and always thought they looked handy, but never put any more thought into it.
Now I think I will get some because they seem like they would be so nice to have around!
MATT A GREAT VIDEO AND THIS WILL HELP ALLOT OF US THANK YOU
Glad it was helpful!
Thanks for this video. I just got a pair of the blocks Saturday and now I know how to care for them and how to use them.
I’ve got a couple of the 23 holes. I keep one by my tablesaw, and the other by my miter saw. I’ve never really thought about using them for anything except getting a 90° angle.
Nice tips, I’m going to use the magnet idea with my combination square
Just got mine, thanks for showing me the uses.
Awesome. You'll love them!
Those are awesome little tools!
Bow do you keep them clean?
I gotta get some set-up blocks. I didn't know I needed them until now!
They’re awesome
Some good ideas, thanks! Definitely going to look for the magnets to fit them.
I take it they doesn't sell hammers.
best video of any you've done... and you've done some super videos!
Wow. Thank you 🙏🏻
I started using these blocks making buildings for my HO train hobby they are great for keeping the buildings square when glueing up the sides. I bought an extra set for the wood shop.
That's a great idea!
Love my 1-2-3 block my Dad gave to me that he made in college. Great Video!
Also, if you happen to have a DeWalt 20v trim router, the center of the bit is exactly 2 inches from the edge, so a 1-2-3 block is a perfect spacer for making dado cuts.
good info!
Wow, did not know that. Super helpful.
No entiendo lingual del señor, por lo visto es lo mejor captado de una herramienta. Gracias pibe, confirmaste mi idea , cosa de trabajo, no se que nombre tiene. Vos sos tronco de maestro.
I just used mine for the first time to provide a stop block against my tablesaw fence when cutting a long piece … I need to add a magnet though so it doesn’t move when the piece slides against it. Love your channel by the way!
Use as a backing block for chiseling out mortise walls.
These are tools you don't think you need until you have them. But the bit holder? Kinda genius!
Thanks
Digital depth gauge…. easy for you to say. Nice job. I bought some. :)
Retired machinist here...123 blocks and 246 blocks are a must have working with metal or wood!!! Better have a big toolbox if you want multipul of each!!!
I duuno, if you nibbled a bit off the Oklahoma jig it would be more shaped like a Nebraska jig. lol. Great idea. Im on that one. The Nebraska jig that is...
Thank you so much for taking the time to make this video
So…theres like 6 things, but if you repeat them for every tool you can think of and then repeat a couple uses two or three times then sure, heck there could be 148 uses. These things are awesome and super useful, which is why I’m so confused as to what the need to exaggerate is…not normally his style. Didn’t use to be at least.
🙄
@@731Woodworks I’m sorry man. Not trying to throw shade. I like your channel and have learned alot from you. Truly, thank you so much man. i guess I’m just acting like a music fan who says they were into a band before they got famous and talks about how their first records were so much better. I just don’t want to see another channel I like start to come out with content that seems less authentic in order to grow their views and sponsors. But you’re a big boy and obviously know what you’re doing. So I apologize for seeming negative or biting. I look forward to the next thing I learn from you!
I bought some of these. What is the best way to take the oil off WD40? Should I use paste wax after I clean off the oil?
Love your work
Thank you!
It's interesting to note that when using these as corner clamps, they are actually cheaper than dedicated corner clamp sets. Furthermore, Tay Tools sells 5/16 bent bolts so you can make your own clamps that are uglier than the dedicated clamps. I had to go this route because the dedicated clamps were sold out.
They are back in stock!
A great tool. Remember now, tools should not be used for what they are not designed for. It could be dangerous. LOL. Good and fun video.
Do you need the Oklahoma jig? If you turned the block to stand 3" up against the fence and use that corner clamp would that work without the wooden jig?
Yes... that's a much simpler application and works like a champ. You just need to make sure you have a center or middle hole which these do. Some dont. Also need to make sure your clamp is deep enough to keep it from flipping the bottom out from the fence. BUT...you really dont need to clamp them to the fence. Put a magnet in the holes like he already showed and it will pretty much just stay put...personally I would lay them down with 2in from the fence.
Great Vid! As a machinist, I have several sets. I find myself only selecting the 11-Hole set.
The prob with the Asian built 23-Hole sets is the Thru-Holes will not pass a Cap Screw thru the unthreaded holes.
It appears the Asian version has been drilled for tapping 3/8-16all the holes, but they did not relieve clearance the pass-thru holes.
With the 11-Hole, you don't need the Connecting Kit to stack them as the standard SHCS passes thru.
Until you drop one on your project
Nice video
Thats a lot more uses than I would have thought of. I've been considering buying a set of these. Thanks for the link. Stay awesome.
I have been using my 1-2-3 blocks more since I saw your video. I also have Taylor's joining kit, but have not used it yet.
I died a little on the inside when I saw you use it like a hammer.
lol
...agreed. But then I cringed when I saw Matt use the handle of a screwdriver to hammer something in, too
You had me at Corner Clamps -- went to order looks like you Sold them out!! Always Love your Videos.
Mike says he expects more any day now.
I love mine and use them on virtually every build. An additional way I use them is to quickly position a base of a shop cabinet on its top since I can put one on each side of the base where it meets the top and just slide the base till the front overhang is even with the back and the sides are even with each other.
Some holes are threaded, others aren't? So you can fix them with a bolt? That's another 10 uses 😉 As always, helpful video!
Why are the 11 hole ones so expensive compared to the 23 hole?
More metal? Not really sure.
4:11 this would be PERFECT for setting jointer knives!
Okay, I purchased them.
Mike at Taytools does have the best deals on these... They'll do 10% on occasion as well.
I wish he sold 1-1-3 blocks as well... they're my most used machining blocks for Woodworking.
They also come in 2z4x6 and larger sizes. Can use all thread and different clamps
I use them to square up my MFT/3 track guide...and pencil holder :-)
Love your videos
Thank you
JUST ORDERED 1.2.3.
Good video thanks for the links. Subscribed 👍
Awesome, thank you!
Bien ocklajoma jip
Really enjoy your channel. Some great ideas (again) shared with the masses. Will definitely consider these.
I got excited and bought the two blocks. How do I get the hardware kit and is it available separately
The kit is available separately, I have it linked directly to the product in the description of this video or just search "123 connection kit" on TayTools.com
Can you please tell me what kind of tape measure you were using at 3min 35sec in this video? Thank you. Never mind I actually found it in the links in the description thank you.
They also make great projectiles for those unwanted guests.
I have a pair of solid 123 blocks. Looks like I have t get some w/ holes...
True story - I ordered the blocks and a bunch of assorted silicon plugs (I'm a pen maker).
The plugs came in a nice, shatterproof organizer/carrying case.
Some one forgot to include packing material when they shipped it.
It turns out that the carrying case wasn't shatter proof after all. Apparently, Amazon doesn't always handle packages with kid gloves.
The blocks were unscathed
“ways to use the most unique …”. There are no levels of unique. A thing is unique … or it is not. There is no “more unique,” “most unique,” somewhat unique”, a little bit unique”, “less unique”. It’s unique or it is not. By definition. These phrases drive me crazy.
That's the most unique comment!
Great vid - what where you wrench holders please?
Tekton, they came with the wrench set.
Thank's for the content I've got many tips from you. Your way of talking is so American :D which reminds me of how unbelievably stupid imperial units are, but the channel is still good.
at the risk of sounding cynical, wouldn't the "oklahoma jig" be a little easier to make if you just planed that board to exactly 1" and didn't mess with the bolt and setup block? Or, couldn't you just put the fence clamp into one of the holes on the setup block and skip the jig?
The 23 hole 123 Blocks you are using. Are they made in the USA?
Howdy again Mr. 731...
I looked up the 1,2,3 blocks over at Tay Tools. Not too expensive, you're correct.
I'm curious though...As you mentioned in the video, it's a tool that wasn't built with us woodworkers in mind, that it's a machinist tool. So, I'm curious. What do "they" use it for? I'm just assuming here, cause, well, I'm not a machinist, but I do know that they typically do welding alot. So I can imagine maybe they use it to get a right angle on 2 pieces of metal and then tack it???
I dunno Mr. 731, I don't think that's a tool I'd have in my shop cause I've got squares of various sizes that give me those same measurements. I'd say, if anything, I'd use it for finding 90 on my blades cause I absolutely can't stand changing my tablesaw blade out of 90 to make a beveled cut. I'll spend 2 hours building a jig at the angle I need and place my board on that then pass through my blade while it's still at a 90. I currently use 2 different squares and an electronic angle finder to re-zero / 90 my blade back up. It's annoying. So, once my blade is set to 90, I very rarely change it. Anyways, having one of those blocks would be handy with that.
Ok, back to work I go.
Love my 123 blocks and I have the Taytools connectors too. Loved all your tips but cringed when you use one for a hammer 😱 😀
lol they are hardened steel. Not gonna hurt em lol
My head is spinning 😂
Do you own a hammer? LOL
All us machinists watching are cringing at you using your 1.2.3. as a hammer... 🙈🤣
BTW ... u can also get 2.4.6. blocks
lol So 246 blocks make bigger hammers? lol
@@731Woodworks 😱😂👍
If there is a small drill insert for a thread hole, it could be a poor man’s parf guide too
lol--you highlighted Oklahoma backwards :)
👍👍👍🤗
I dont know I still cringe watching u hammer on steel with it
These just seem like a way to slow down the aleady very slow wood workrr
A very useful video, lots of great ideas. However, I also cringed at their use as a hammer, and your comment they could be dropped on the floor without damage. A drop onto cement, or hitting steel with them can make dimples and burrs on them so they are no longer flat. Use a flat sharpening stone to correct this.
I use them when I make dioramas with cardboard. Most of your show are jokes, they have much more important uses.
Jokes? I showed 25 real uses for them. Maybe you don't like them or you wouldn't use them for those reasons, but it doesn't mean they are jokes. No need to be rude about it. Geez. I have no clue why folks have to be so negative sometimes. I can't imagine what it must be like walking around with that negative mindset every day.
@@731Woodworks don’t let it get to you. Some people are jerks just because they woke up.
@@731Woodworks Do you think that using a precision block, as a paperweight or for drill bits, are serious uses for those wonderful accessories, which I use frequently?
@@manuelurdaneta8649 Yes, I do. I think they are awesome uses for them. Since I bought em, I can use them for whatever I want. Like to weigh down my inflatable lawn snowman. Or to keep my "Go Kick Rocks" balloons from flying away. Want a balloon?
@@gamer2101 for sure
26. A hammer
😂
If only it was metric. Then it would be a real piece of engineering
Are you sure it is 99%? Not 98% or even 97%? For crying out loud, stop using childish click-bait titles. You can do better.
It was actually 99.1% but I didn't want to be that specific. 🙄 Chill out.
@@731Woodworks I would be really interested in your methodology... And is it the same 99% that you refer to in other videos? Do you not realize that such casual prevarication does not aid your believability? People want serious information, not click-bait.
@@Tensquaremetreworkshop This was serious info. Good info too! So I can assume the video you made on "Best Storage" is the absoutle best in the world? Or was that casual prevarication?
@@731Woodworks In the video in question I attest that the best form of tool storage is that which delivers the tool into the hand with a single motion, aligned for use. It is an opinion I am happy to defend. Do you know of a system that is better at this task? Even then, you will see that I put the 'best' in inverted commas in the notes. Other views are possible, but in my opinion the time it takes to retrieve and replace a tool is the most important feature in the workshop. What other metric could one use? I also avoid words like 'perfect' and 'exact' - these are platonic ideals that do not exist in the real world. Much better to talk of tolerances, and degrees of precision. I note that you use 'ultimate' - a brave choice, sure to be wrong...