Solutions that can help you to be a Real Joiner, and that can make your day count! ✅✅ Make 16,000 Projects With Step By Step Plans ...even if you don't have a large workshop or expensive tools! ➡ Get instant access to 16,000 projects now e8776pv9zrv8tpgmf11fs9-oeq.hop.clickbank.net/
Needs refining. Stronger shaft, balanced wheel, slow rotation possibly, less width to stop flexing, wooden wheel with changeable wet and dry paper on outside and slow rotation with water drip to give mirror like scalpel sharpness
Fantástica ideia, Will! Muito bom mesmo! 😃 Daria pra colocar um recipiente pra água debaixo da pedra! Abraços e se mantenha seguro aí com sua família! 🖖😊
@@WillWoodDiywoodworkingsi, si senior, si!!! Simplicity+practicity... Thanks🙏 for your😮 💡idea About "💧💦waters-bowl"... Good(device-lifehake) 👍-always better them nothing!!!
There's a reason no one shows this "Trick" on the internet. As someone else has already stated, it needs refinement.... serious refinement. Good luck with it not flying apart.
adorei essa ideia, sò acho poderia melhorar a precisão na rotação da pedra e a possibilidade de molhá-la com água o resto è td bom mesmo! Um abraço da Itália 🙂
Вогнутая линзовидная заточка весьма широко распространена, в т.ч. и на железках рубанков. Биение убирается за 5-10 минут. Сама идея вполне годная (посмотрите заточные станки TORMEK)
These videos are simply super! ❤ Why? Because you do not need any super special device, appliances, and can you make it home! Somebody is complaining that kindergarten level, etc.. I don't agree, look:professionals will need no videos, some people simply buy some sharpener, but, most of people want to do something, have just basic hand tools, no big expensive machines, no room to store it, and these people are eager for help, as me. So real pro, inventor, can give you advice, how to create some gadget, help, how to use one hand electric device several way, etc.. And that I highly appreciate! 👍
Nice use of the tools you own. Still, there's nothing like having the right tools. You also could mount more than one grinding wheel and end up with a polished finish on your irons. But you MUST get rid of the wobble and the eccentricity of the wheel. Then again, I wouldn't opt for using a drill and some all-thread for a shaft.
Cool idea, just need to balance the wheel to get rid of the up and down action but otherwise very neat. You might want to clean and sharpen your hole saw and drill bits. It will help with the appearance of the cut and it will make it cut better too. The black that it leaves behind is called burning and it could catch on fire. Don't want you getting hurt or anything, stay safe and keep building! 😁
I own 6 six planes and have sharpened them on a wet stone for 20+ years. I do not see an advantage to this. Likewise, I can sharpen all six several times in the time it took you to build this, and I get a razor sharp blade when I am done. In my opinion it is not a trick it is a waste of time unless you are doing 100 blades at a time and if you are, you would need a better quality machine than this.
This guy is really slick. With a little imagination, you could almost bring yourself to believe that he has actually used tools before! Well, alright then, a LOT of imagination.
I have to ask if this contraption is as safe as the proper bench grinder. I notice that in all these videos that top of the line tools such as angle grinders, drills are used rather than cheaper unbranded models. This is obviously because brands like De Walt while being comparively expensive are safe sturdy and reliable. Yet they will modify these tools in a way never designed and compromise safety. This video reminded me of my late father, who rigged up a bench saw, which he also used as a chisel sharpener. As a child I never realized what a dangerous contraption it was with no guards of any kind and spinning at a high speed. He didnt use push sticks or wear earmuffs. Perhaps he was lucky that he didn't suffer serioius injury especially that carpentry was his livelihood. We have come a long way since then but I hope I have learnt to repect power tools and use the right tool for the job.
In 1/4 the time it took to construct this monstrosity, you could have manually sharpened ALL of your knife blades, chisels and plane blades with a wet stone (oil stone, diamond stone etc).
Забиваем гвозди адронным коллайдером. При наличии в мастерской инструмента общей стоимостью с адронный коллайдер в ней не нашлось второго гаечного ключа, хотя бы разводного. Люфты, биение... хай-тек в стиле хай-так.
Nobody shows it because you can buy a cheap honing guide for couple of dollars that works perfectly on any flat abrasive like wet stone, oil stone, sandpaper etc.
Камень ровно не получилось установить? Нужна втулка, тогда биение будет минимальным, но при наличии сверлильного станка сверлить шуруповертом и дать неверное направление для оси это нужно суметь такое сотворить, и все получилось..., а точить полотно без правки это шедевр. Идея понятна, но реализация на 3-.
Pourquoi l'idée n'est pas le top .1 angle de coupe ne doit pas dépendre que du diamètre de la meule .pour mieux faire il te faut un montage sur le côté afin de travailler avec la face plane de la pierre et là c'est toi qui règle le degré de l'angle de couler a avoir .en plus 'le diamètre doit être plus Gd et monter une pierre pour le travail des outil a bois < Gd Diamètre en générale elle sont rouge et plus épaisse et mètre un récipient sous la meule avec un anti éclaboussure et tourner moins vite ..
Looks like the plane iron would get hot and draw the temper if you couldn't quickly and frequently quench it. The idea seems sound, but without a way to quench the piece, it seems like it'd be the ruination of your blades.
Биение камня это еще пол беды, беда заключается в том, что у ножа нет горизонтальной жесткой опоры, а от сюда и ни о какой точности говорить не приходится. Просто, красиво, бесполезно!
Во первых, шпильку надо жёстко зафиксировать во внутренних обоймах подшипников, иначе их разобьёт, и тогда к уже имеющемуся биению камня добавится люфт в подшипниках. Во вторых, камень надо выровнять алмазом и отбалансировать. А в третьих, такую приблуду лучше сделать к заточному станку, а не лепить этот колхоз
Um Gottes Willen ,nein nein nein . So nicht !!! Aber im Ansatz schon ganz gut . Allerdings nicht um Hobelmesser , Stechbeitel und so etwas zu schärfen !!! Das geht beim besten Willen nicht !!!
Solutions that can help you to be a Real Joiner, and that can make your day count!
✅✅ Make 16,000 Projects With Step By Step Plans
...even if you don't have a large workshop or expensive tools!
➡ Get instant access to 16,000 projects now
e8776pv9zrv8tpgmf11fs9-oeq.hop.clickbank.net/
С таким биением , и не нужно показывать это в интернете 😱😱😱😱😱
Вы, наверное тоже точить не умеете, не ноже будут заусенцы- строгать не будет.
А биения тут вообще херня...
Needs refining. Stronger shaft, balanced wheel, slow rotation possibly, less width to stop flexing, wooden wheel with changeable wet and dry paper on outside and slow rotation with water drip to give mirror like scalpel sharpness
i.e. nothing like what is done here
und eine passende Scheibe nicht zu vergessen,damit kann man Pflugschare schärfen.
Great work bro! Does exactly what it is supposed to do. Thank you for taking the time to record, edit and share 👍
Thanks for watching and leaving your comment 😉👍🙏
Кто хочет убить нож на рубанке - повторяйте за ним...
с водой надо и мелкозернистый камень
Ой, совсем плохо, зернистость конская, биения конские, точность ничтожная. Да и плоскую заточку желательно делать. В топку!
There is a feeling of satisfaction when you make your own tools. Better options may be available but you can't brag that you made it yourself!
I built a jig like this back in 1975, I still have it and it still works,,,popular mechanics
Fantástica ideia, Will! Muito bom mesmo! 😃
Daria pra colocar um recipiente pra água debaixo da pedra!
Abraços e se mantenha seguro aí com sua família! 🖖😊
Fala meu amigo! Pô, boa ideia mesmo. Grande abraço e cuide-se bem. 😉🙏👍
@@WillWoodDiywoodworkingsi, si senior, si!!! Simplicity+practicity...
Thanks🙏 for your😮 💡idea
About "💧💦waters-bowl"...
Good(device-lifehake) 👍-always better them
nothing!!!
There's a reason no one shows this "Trick" on the internet. As someone else has already stated, it needs refinement.... serious refinement.
Good luck with it not flying apart.
Thanks for the idea. Good starting point for beginner mind. Can be refine, the brain has to start somewhere. We all are not pros starting out.
adorei essa ideia, sò acho poderia melhorar a precisão na rotação da pedra e a possibilidade de molhá-la com água o resto è td bom mesmo! Um abraço da Itália 🙂
Top....'bravo
Какой ужас. Старания бесспорны, но такое нельзя показывать. Это брак. Максимум, если как пример того, что нельзя делать
Somebody has too much time on his hands.
Исправить центровку наждачного круга. Спасибо за идею и работу .(Ереван)
Насаженного на шпильку??? Хотел бы я это увидеть )))
@@ДмитрийВеретенников-р5м изоленту намотать можно.
В чём идея-то?
Здесь показано как делать НЕЛЬЗЯ!!!!!!
В точку!
да уж, видно что камень "бьет" и к тому же кромка будет иметь вогнутость по диску
Вогнутая линзовидная заточка весьма широко распространена, в т.ч. и на железках рубанков. Биение убирается за 5-10 минут. Сама идея вполне годная (посмотрите заточные станки TORMEK)
These videos are simply super! ❤ Why? Because you do not need any super special device, appliances, and can you make it home! Somebody is complaining that kindergarten level, etc.. I don't agree, look:professionals will need no videos, some people simply buy some sharpener, but, most of people want to do something, have just basic hand tools, no big expensive machines, no room to store it, and these people are eager for help, as me. So real pro, inventor, can give you advice, how to create some gadget, help, how to use one hand electric device several way, etc.. And that I highly appreciate! 👍
Das hast Du gut formuliert
Thank you for your innovation
MM77 Approved 👍🏻👍🏻
Good idea but it isn't accurate . I think it is very accurate but grinding disk hasn't in center. This tools is very useful and practical ❤️
Thanks for watching my friend 😉👍🙏
Love to you my friend 🌷👍
I'm from Iran.
И зачем я это смотрел ❓😢
The quality of your videos is outstanding, always making me learn something new!
Probably waiting to see what the trick was that never happened. You and l have just wasted 10 minutes on this rubbish
Good idea, but a bit wobbly and dangerous. Additionally, there is no guide to set the grinding angle...
Thanks for watching 😉🙏👍
Projeto simples e genial já dei o Like e ganhou mais um inscrito só não pode deixar a lamina aquecer para não tirar a tempera.
También servirá para afilar formones...muy buena idea 😊
Nice use of the tools you own. Still, there's nothing like having the right tools. You also could mount more than one grinding wheel and end up with a polished finish on your irons. But you MUST get rid of the wobble and the eccentricity of the wheel. Then again, I wouldn't opt for using a drill and some all-thread for a shaft.
Excelente del momento que ha medida que avanza da todas las medidas a utilizar. El mejor video que he visto.
Video vielleicht,aber das Ergebnis ist Hahnebüchend !
Cool idea, just need to balance the wheel to get rid of the up and down action but otherwise very neat. You might want to clean and sharpen your hole saw and drill bits. It will help with the appearance of the cut and it will make it cut better too. The black that it leaves behind is called burning and it could catch on fire. Don't want you getting hurt or anything, stay safe and keep building! 😁
Thanks for watching 😉🙏👍
Anda sangat jenius
Terimakasih telah berbagi
Gute Idee, einfache Ausführung leicht zu bauen toll. Ich finde es gut.
Thanks for watching 😉🙏👍
das kann nicht dein Ernst sein?
Pliers are for HOLDING things.....not mutilating nuts and bolts. Get some remedial training in the use of tools.
Those vibrations looked pretty intense. Also how do you grind a camber on an iron?
i agree 100% no one show on internet but but this is intellectual rights
Ever hear of a crescent wrench rather than pliers to tighten a nut. Show you know the right tools and how to use them.
Я не профи, но на простом точиле, держа нож рубанка в руках, заточил бы его намного лучше, чем при таком биении круга.
Эта ерунда не стоит таких усилий. Проще использовать обыкновенное точило.
С упором!
Great idea thank you
Thanks for watching 😉🙏👍
Een moer tegenhouden met een combinatietang, chapeau!
Parabéns irmão 👏👏👏👏👏🍶🍶🇧🇷💪👋
Awesome
Thanks for watching and leaving your comment 😉👍🙏
Bravo hai scoperto l'acqua calda,
Thanks for watching 😉🙏👍
Muito bom merece parabéns
Super przydatne urządzenie. Pozdrawiam.
Между прочим вариант очень даже рабочий,камень только бьет,но выровнять не проблема
Thanks for watching 😉🙏👍
They make tools for that kind of jobs .and a lot easier to use
I own 6 six planes and have sharpened them on a wet stone for 20+ years. I do not see an advantage to this. Likewise, I can sharpen all six several times in the time it took you to build this, and I get a razor sharp blade when I am done. In my opinion it is not a trick it is a waste of time unless you are doing 100 blades at a time and if you are, you would need a better quality machine than this.
Well well bro, great tool 👍👍
Ну если диаметр камня увеличить до 400 мм, то идея будет рабочей. Пока только фантазии.
можно на подходящее колесо пол метра наждачку приделать. водяное точило
Very cool 😎 That’s I call a really good idea 👍
😉🙏👍
Gostei muito, parabéns. Um abraço daqui do Brasil.
Obrigado por assistir e deixar seu comentário 😉👍🙏
This guy is really slick. With a little imagination, you could almost bring yourself to believe that he has actually used tools before! Well, alright then, a LOT of imagination.
Для кружка ,,Умелые руки,, младшего школьного возраста
см. заточный станок школьника. там на шланге. 50 лет работал
I have to ask if this contraption is as safe as the proper bench grinder. I notice that in all these videos that top of the line tools such as angle grinders, drills are used rather than cheaper unbranded models. This is obviously because brands like De Walt while being comparively expensive are safe sturdy and reliable. Yet they will modify these tools in a way never designed and compromise safety. This video reminded me of my late father, who rigged up a bench saw, which he also used as a chisel sharpener. As a child I never realized what a dangerous contraption it was with no guards of any kind and spinning at a high speed. He didnt use push sticks or wear earmuffs. Perhaps he was lucky that he didn't suffer serioius injury especially that carpentry was his livelihood. We have come a long way since then but I hope I have learnt to repect power tools and use the right tool for the job.
Малость доработать ,и нажи для рубанка точить можно ,идея хорошая.
Great Idea! √√ --BUT: The Stone is waaaay tooooo wobbly. Stone needs to be CENTERED much better, hence balance would be given.
In 1/4 the time it took to construct this monstrosity, you could have manually sharpened ALL of your knife blades, chisels and plane blades with a wet stone (oil stone, diamond stone etc).
😂 Super.. Rad neu erfunden 🤝😁
No matter what you say not building a brace for the is just plain dangerous
Идея 👍, но балансировка точильного камня "вышла из чата" 😁
Teniendo una taladradora de columna los taladros de 35 de diametro los hubiese hecho mejor .
Saludos 👌👌⚒️⚒️
Забиваем гвозди адронным коллайдером.
При наличии в мастерской инструмента общей стоимостью с адронный коллайдер в ней не нашлось второго гаечного ключа, хотя бы разводного.
Люфты, биение... хай-тек в стиле хай-так.
Nobody shows it because you can buy a cheap honing guide for couple of dollars that works perfectly on any flat abrasive like wet stone, oil stone, sandpaper etc.
Это называется изобретать велосипед, когда коту делать не чего!!!!!
А Вы делаете что нибудь ?
@@VahanToroyan-zx4ed Да, я творческий человек, делаю красивые вещи из дерева, но такой хернёй я не страдаю
Si pudieras poner la lista .escrita te lo agradezco maestro.gracias.saluditos cordiales para ti.
Не каждый с помощью "трюка" хочет показать альтернативную свою одарённость.
Simple, but brilliant idea that works very well.
You have a new subscriber Sir!
Where did you see an idea? Have you learned anything new?
Камень ровно не получилось установить? Нужна втулка, тогда биение будет минимальным, но при наличии сверлильного станка сверлить шуруповертом и дать неверное направление для оси это нужно суметь такое сотворить, и все получилось..., а точить полотно без правки это шедевр. Идея понятна, но реализация на 3-.
Thanks for watching 😉🙏👍
Kan bero på att ingen har kommit på detta tidigare. Smart ide tycker jag
Oh hell no...I will stick to hand sharpening....there is so many inconsistencies...hell the blade practically jumps off the wheel.
Muito bom wou de bola
Не серьезно. Инструмент так не точат.
Good ❤❤❤❤❤
Биття заточного круга зводить нанівець всю конструкцію. Потренуйся з балансуванням та центровкою і шпильку для вісі не менше M12, чи 1/2'
Unprofessional leads to low quality but what's worst, unsafe. Learn mechanical and physics principles first, than be inventive.
Pourquoi l'idée n'est pas le top .1 angle de coupe ne doit pas dépendre que du diamètre de la meule .pour mieux faire il te faut un montage sur le côté afin de travailler avec la face plane de la pierre et là c'est toi qui règle le degré de l'angle de couler a avoir .en plus 'le diamètre doit être plus Gd et monter une pierre pour le travail des outil a bois < Gd Diamètre en générale elle sont rouge et plus épaisse et mètre un récipient sous la meule avec un anti éclaboussure et tourner moins vite ..
Looks like the plane iron would get hot and draw the temper if you couldn't quickly and frequently quench it. The idea seems sound, but without a way to quench the piece, it seems like it'd be the ruination of your blades.
Your hole saw is dull and you are in need of a new one. But still very nice work, I have had to use dull blades a few times.
Grinding wheel shuld be true alliment, it's out running.
A photo of the finished item at the beginning of the video would be nice. Otherwise no idea what is being shown.
Thanks for watching my friend 😉👍🙏
Биение камня это еще пол беды, беда заключается в том, что у ножа нет горизонтальной жесткой опоры, а от сюда и ни о какой точности говорить не приходится. Просто, красиво, бесполезно!
Thanks! You are father of invetions🙏
Meine Güte, deine Bohrkrone ist so was von stumpf!
Гений!!!😂😂😂
Направление движения круга неверно.Не надо это смотреть.
that blade leads in the work
Sangat keren
Thanks for watching 😉🙏👍
Dụng cụ dùng để mài lưỡi bào kiểu này biến người thợ mộc sửa thành rô bốt.😂 mà mài như vậy không đảm bảo được chất lượng bào.
Tuto : Comment détruire une lame de rabot
Во первых, шпильку надо жёстко зафиксировать во внутренних обоймах подшипников, иначе их разобьёт, и тогда к уже имеющемуся биению камня добавится люфт в подшипниках. Во вторых, камень надо выровнять алмазом и отбалансировать. А в третьих, такую приблуду лучше сделать к заточному станку, а не лепить этот колхоз
geniusz ,jeszcze trochę ,a wynajdzie proch,kolo ,papier i porcelanę,ale zaistniał w internecie
Doppeschatung
mit Steckdose
Nimm doch gleich einen Winkelschleifer.
Ein Hobeleisen mit einem Winkelschleifer schleifen. Größerer Blödsinn ist mir noch nicht untergekommen!
Um Gottes Willen ,nein nein nein . So nicht !!! Aber im Ansatz schon ganz gut . Allerdings nicht um Hobelmesser , Stechbeitel und so etwas zu schärfen !!! Das geht beim besten Willen nicht !!!
Kauf doch mal einen zweiten Maulschlüssel !
Контрить гайки двумя ключами слабо?
У него только один ключ😂
ну то, что инструментом пользоваться не умеем мы увидели и рубанок строгать не будет, тоже понятно, а видос-то про что?!
🙂!
Кому это баловство нужно???
Ура он изобрел точило😂😂😂😂😂😂
250 полуляхов из 250
Jama!
почти не бьёт!))