Не хочу показаться грубым, автор молодец проделал большую работу, но все перечисленное можно зажать через брусок прикрученый к столу обычными струбцинами, а вот клампы это было бы интересно, может у вас есть какие-то идеи, как их сделать своими руками?) 😊
Maybe add a thin layer of cork to the inside of your vice. If you work with an expensive piece of wood, the cork has a lower risk of denting the surface of the workpiece.
que medida es la del triplay y a cuanto estas hechos los avugueros para los tarugos, es una excelente herramienta que yo necesito una ya que estoy haciendo mi propia cajonera
Тиски из фанеры…, это не надолго. Я бы не стал возиться их делать, а второй вариант я сделал лет десять назад, из металла. Фанера столько, уверен, не прослужит.
I have to be honest, but not I'm not impressed with your tool skills. Your ideas are OK - even though there are better solutions to your problems out there. You are ruining your chisels by using them for other things than chiseling. The same goes with the planer, which you stand on its knife. That will destroy the knife prematurely. Put it on its side or the front on a small piece of wood, so the knife does not touch the table, if it is below the sole of the planer. Your drills are obviously not very sharp anymore. You should not run the hole saw hot. It will remove the quenching of the metal and make it brittle, which will result in it being ruined quickly. Take a little at a time, so it does not run hot. And you have no quality or fitness with the things you make. You could actually center the end nob and the two rings with a drill, when you glue them together. Then they will be perfectly centered. Clearly you are used to using electric tools and have not gained the most basic wooden craftsman skills with handtools. Lean to use handtools properly before going on to electric tools. Including properly sharpening them. You will have much more enjoyment, if you have those skills. And your projects will look that much better and actually last longer when put together properly with the right kind of wood. For instance use hardwood for the vices and knobs - like oak, beechwood or walnut. You will be able to have them for many years then.
Wow. Pocas veces he leido una critica tan respetuosa y con animo de dar consejos bien intencionados. Todo lo que dices tiene mucho sentido. Felcitaciones. Eres una excepcion en estos tiempos de burlas infinitas
Супер. И главное, сделано всё на коленке, а не с помощью всяких навороченных токарных, столярных, сверлильных, лазерных станков
💪😤👍
Parabéns pelo excelente trabalho. Vou copiar sua ideia. Obrigado por compartilhar. 😊
Muy buena idea gracias por conpaertir
Its is amazing to see how fast he works, and yet so precise!
Felicitaciones maestro excelente trabajo gracias por compartir
Ellerine sağlık kardeşim harika fikirler teşekkürler.
parece demostración de herramientas. Buenas ideas. gracias
Thank you for the ideas. I suppose we can make these out of any wood at all ❤
Не хочу показаться грубым, автор молодец проделал большую работу, но все перечисленное можно зажать через брусок прикрученый к столу обычными струбцинами, а вот клампы это было бы интересно, может у вас есть какие-то идеи, как их сделать своими руками?) 😊
Maybe add a thin layer of cork to the inside of your vice. If you work with an expensive piece of wood, the cork has a lower risk of denting the surface of the workpiece.
Complimenti.ottimo lavoro e ottime le idee.grazie per questo video 😊
Bravo !👏👏👏Vrhunska ideja!
Sve pohvale,za vas rad!!!
Cool 🙌💪💫
Good effort with skill set
Well done, thanks for sharing
Parabens meu amigo obrigado
🙌
Mantab sekali kreatif sederhana bisa langsung bikin
목재 클램프가 독창적인 아이디어??...영상 잘 봤습니다
Buenísimo,muchas gracias por compartir el proceso de sus trabajos!!
Why didn’t you mark the center point before cutting the corners ?
Yo le añadiria un resorte en mefio del tornillo pero esta excelente la idea bendiciones
Buenísima idea de prensa de banco, q además, puede see fácilmente movible.
Very Good Jigs 👍 🇧🇷
👍👏👌🤜🤛🤝. Очень классно. Удачи. Благодарю.
Gute Arbeit! Einfach aber effizient! 👏👏👏👏
👍👍👍
У мня есть похожие приспособления.Я не знал,что это гениально.
when you're a woodworker but you also have a war to fight
que medida es la del triplay y a cuanto estas hechos los avugueros para los tarugos, es una excelente herramienta que yo necesito una ya que estoy haciendo mi propia cajonera
Это что? Учебное пособие как клеить гайки в фанеру, ведь именно это занимает половину видео?
How many days did you think about this idea?
nagyon felvan gyorsitva testvér.
😄
Стамеской по клею с опилками и гайке? Это ж инструментальный вандализм!
Ничего полезного я уже впечатлен
Esto no impresiona nada, además hecho con madera de baja calidad, mas bien parece publicidad de maquinaria ryobi.
👍🇵🇪
Розміри подавай,якщо ідеї геніальні
Тиски из фанеры…, это не надолго. Я бы не стал возиться их делать, а второй вариант я сделал лет десять назад, из металла. Фанера столько, уверен, не прослужит.
Сравнил фанеру и металл 🤦♂️
@ специально для тебя повторяю - я не стал бы возиться делать тиски из фанеры. Читай внимательнее.
I have to be honest, but not I'm not impressed with your tool skills. Your ideas are OK - even though there are better solutions to your problems out there. You are ruining your chisels by using them for other things than chiseling. The same goes with the planer, which you stand on its knife. That will destroy the knife prematurely. Put it on its side or the front on a small piece of wood, so the knife does not touch the table, if it is below the sole of the planer. Your drills are obviously not very sharp anymore. You should not run the hole saw hot. It will remove the quenching of the metal and make it brittle, which will result in it being ruined quickly. Take a little at a time, so it does not run hot. And you have no quality or fitness with the things you make. You could actually center the end nob and the two rings with a drill, when you glue them together. Then they will be perfectly centered. Clearly you are used to using electric tools and have not gained the most basic wooden craftsman skills with handtools. Lean to use handtools properly before going on to electric tools. Including properly sharpening them. You will have much more enjoyment, if you have those skills. And your projects will look that much better and actually last longer when put together properly with the right kind of wood. For instance use hardwood for the vices and knobs - like oak, beechwood or walnut. You will be able to have them for many years then.
Wow, that's a great deal of input... Could you provide a link to your channel?
Wow. Pocas veces he leido una critica tan respetuosa y con animo de dar consejos bien intencionados. Todo lo que dices tiene mucho sentido.
Felcitaciones. Eres una excepcion en estos tiempos de burlas infinitas
Unsolicited advice is usually perceived as criticism.
The crossgrip on the miter saw at 0:34 is a safety danger.
what kind of glue do you use to hold the nuts in the wood?
Cosmofen