How to Bind with Flysky Receivers - iA6, X6B, iA6B, Fli14+, GT3B, FLIT10 - FS-i6 and FS-i6X Radio
HTML-код
- Опубликовано: 12 июл 2024
- You can now support RCwithAdam (and gain special perks!) HERE: ko-fi.com/rcwithadam 🤗
Visit my website here: rcwithadam.com/ 💻
Need to bind your Flysky receiver to your Flysky transmitter? This video is for you! I'll show you the two MOST COMMON methods of binding that will apply to almost ANY receiver! I'm using the FS-X6B and FS-iA6 receivers as examples for binding with the FS-i6 transmitter (AKA radio).
In case you're wondering what BINDING is, binding is like a "virtual handshake" between your receiver (Rx) and your transmitter (Tx), and is required before you can use the receiver. This way your transmitter will "remember" the receiver and automatically "pair" with it every time you fly.
*NOTE: My bad, GT3B is a transmitter and GR3B is the receiver.
Quadcopter receivers:
FS-X6B amzn.to/2ITlyeU
Fli14+ amzn.to/2MFmN2u
FLIT10 (not recommended)
Airplane receivers:
FS-iA6 amzn.to/2q90drk
FS-iA6B amzn.to/2ONohKD (my favorite)
FS-iA10B amzn.to/2MI3lC7
FS-GR3B amzn.to/2oIbnmw (good for cheap 3-channel planes)
Buy through these links to support the channel:
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
MY GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
FILMING GEAR
Main camera amzn.to/2pGZA4L
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects!
Thx man you made my day, thank god because of you I succeed on this😁
This helped me get my Fli14+ bound up, thanks Adam! Flysky and box goggles FTW!!!
This was great I would rank this number 1 of all RC tutorials. Keep up the good work!
Wow, thanks!
Thank you man! it is been a week since I had this problem. Thank you so much!!!!
Perfect sir! No unnecessary jadajada, straight to the point. Good job sir!
Thanks man, I couldn't work out what was wrong with my receiver but this fixed it. Great vid.
I ask a question and forgot to tell you, you are the best I've found the explain how all this new stuff works. Thank you thank you thank you.
Thanks for the feedback. My pleasure.
Love your Video !
It's so descriptive !!!!!
Thanks for the tip for binding ia6 receiver Cheers
This video really helped me out! Thanks
very clear, thank you for the video
Awesome video and clear!
Great yours is the only one that works
Très bien expliqué, merci.
thanks man good video
Thank You!!!
i guess now i know a bit how to use this with kopilot.great video!
Thank you! If you have any more questions, let me know!
thank you for your help this helped me lots :)
You're very welcome!👍
RCwithAdam I really appreciate it
thx a lot!!!
Tank’s yow sow much FOR this video Is working very well
Great! 👍
thanks, that's helpful
Very well executed lesson thanks for going slowly and clearly
Thanks for the feedback!
Could you make tutorial how to setup ibus on i6, you have video on i6x only! (for betaflight)
please
Very good 👍 😊 👌
Thanx Bro!
top man, thank
Thanks for this great video & whatever you do don't do what Tiger's RC channel is suggesting ...... you'll release the magic smoke from your receiver
Hi, please tell me. Which of these two receivers is best for the Sonicmodell Mini AR Wing? Ia6b or X6b? Dimensions and weight aside, which receiver would you choose? Thank)
I'd like to see you do a video on how to properly install a Tarot (or comparable) retractable landing gear with the FlySky I6X and receiver. I'm having difficulty determining how to use one of the aux switches to operate the landing gear. There seems to be something small I may be overlooking.
Great video! I still use fs-i6 with 10 channel mod. Do you know of any receivers with good range? I've tried finding one online but can't find anything suitable.
Thanks for your help. I have a question. Can I bind this receiver with a Taranis Transmitter?
Hello there Rcwithadam thanks for your reply can I ask I have try the way you teach at the video but still can't work is that maybe I have already bind 1 reciver at transmitter so the transmitter refuse to accept the second reciver !
For the 3 pin plugs on the receiver which side is for the black wire or negative wire?
Hello ! Great vid. I conect oposite voltage baterry to my fs ia6 receiver AND saw smoke... any ideas for the repair
I think we can use an old usb phone charging cord and phone charger to get 5 volts to power a reciever to bind it to our transmitter before we even have to put it in our drone or plane . The red and black wires are 5 v on a 5v phone charging cord . This might make it easier . Bind buttons can be hard to hold down while plugging in a battery with one hand if the reciever is mounted inside the model . So check the voltage with a meter if you try .
I have a Flysky Tx & Rx but am having trouble getting servos to work after I have bound the Rx.Any suggestions would be appreciated?Thanks. Ross Blackwell
Adam do you know what subtype flysky reciever is for the purple flysky reciever ? I have a multi protocol tx12 tx . 4in1
I just followed your video, thank you for that. However I still can’t get my arris drone to anything, it won’t throttle up or fly. Do you have any suggestions ?
I have a question what will change if i change model ? And do i need to set up mu old setting in new model?
hi bro how you done i watched this great video but i need your help i have radio control FS 10ch i6s white i use him on my rc truck with battery 3s 4200mAh 35c but when the battery is weak and the truck move slowly the battery still full on my radio screen i think she needs adjust from RX set up
high volteg 6.0
alarm volteg 4.2
low volteg.4.0
i think she adjust from this settings until to reading right if you have any idea i hope tell me that thx dude
Adam, to say I could use your help is a huge understatement. I bought a heavy duty, all steel hydraulic loader from an online auction. It came with no paperwork, no instructions, and I'm totally new to this. Upon playing around trying to figure it out, I could only get the bucket to raise and lower. thinking there must be a problem with channels synced between receiver and controller, I chose the factory reset option, big mistake I know now. Ive been doing a ton of reading, and watching videos, about all of yours, so I think I have a grasp of what needs to be done. Doing it not so much. everything i have watched regarding binding the two, the receiver is out of the truck, plane, etc. Can I bind the two with the receiver in the loader? taking it out looks problematic. I have made a jumper bind wire, put it on with heat shrink protection from touching the center terminal. Can I now bind with the FlySky FS-I6S? If so, how? The receiver is a FS-IA10B. 2nd question, would you be willing to help me set the remote controller up? I am reaching out to you here, I am new to this so not sure where would be best. I need help bad! And it would be greatly appreciated! Tom
Hi nice video about transmitter binding with receiver, but I'm facing solid red light problem in fs-CT 6B receiver, at first it will stop blinking but after disconnecting all connections it is not connected again that is solid red light, could you explain to how get solid light in receiver
Does it matter what lipo battery it is or no because I was thinking of doing for the fs-16x controller to use a 6.4 volt battery to bind to the controller.
Which channel do I plug the left yaw servo into?
I use a FlySky FS-i6X Tx and FS-iA6B Rx for my model sailboat. I would like to collect control data (PWM) using a second FlySky Rx connected to an Arduino and datalogger. Is there any way to simultaneously bind two receivers to a single transmitter? I also have FS-GR3E and FS2A=4CH receivers available. Thanks.
Eeeh wht's up doc, i have a TR624 receiver from Tactic and i want to connect it to an F4 or F7 flight controller ? which cable's (channels) or Pin's would i need to connect from the receiver to the FController
Do you know if there is anyway to bind this with UMX receivers? OR any other micro gyro receivers.
So what reciever you think is a good brand for the Protek 35 analog version? I also have 2 drones that need work.
What transmitter do you have?
Hi,
Can I set up a second receiver to work with the same transmitter? 1 Tx to 2 Rx?
I have a Question . Are there any Flysky Receivers with built in Gyro for RC planes ? If so, which one ? thanks !
Preferably in combination with x6b. :)
Hello bro are you online if yes then I wanna ask that can we calibrate when reacever installed on quad copter...?
Does the Fs-I6 support any receiver with gyro? I'm a beginner
Hi, what battery did you used to power the receiver 2S 7.4v ? That receiver take only 6.5v, will it damage it ?
Hi! The battery is 2S, but it is connected to the ESC, and the ESC is regulating the output voltage to a constant 5v (using a built in Battery Eliminator Circui (BEC)).
i really need help with my eachine wizard x220, when i bind it it doesn't send any signals to the receiver.
For anyone struggling, it's easier if you first power up your quad without the receiver connected, then hold the bind button while connecting the receiver wire.
how to bind fs i4x(tx) with fs r6b(rx) im in trouble ! please help me
Adam I have a RTR truck that is all set up, but when I went to power up the radio it was junk. I bought another radio same model and style and went to bind the new radio to the same receiver and the receiver would not stay on.. something is amiss can you help please!!!
Getting a bind but no servo action. I tried 2 different receivers and same thing.
Are bind plugs universal or brand specific? I lost the one that came with my transmitter and need to find a new one. =(
Universal.
i have a microzone mc6c transmitter. Can I bind a flysky IA6b receiver to it?
Help! adam I reversed channel one on the controller now i can' t reverse it back . i have followed the instruction the switch looks flipped but its not. I am using this on a sailboat for the main sail control. Down should bring the sail in and up should let the sail out . i reset the controller defaults and followed your instruction to rebind the receiver.
hi, i hav a FS-i6 controller, i want a full kit to use the controller and build cars and planes and whatever comes to mind with the 3d printer and such...
I know that FS-iA6 or similar is needed, but I would like to know what other components are needed (battery and its charger, something to be able to put an fpv camera... and others.
thz
İ have fly sky fsi4 and A6 receiver
When i try to bind the slowly flashing red light not changing into steady light. Any solutions?
I have the same transmitter and receiver but my transmitter doesn’t say bind OK. it just is trying to bind and stuck on that screen no matter what combination I do of powering up what first
I have the Xiangtat Flysky FS-X8B Receiver and I bind my remote to it and go into beta flight and I go to receiver and I give throttle and nothing happens. Just build the drone tryo 79 anyhelp?
I've got the exact same receiver and transmitter. I'm not able to get the receiver to have the fast-blinking light when I have the bind cable and a 5V power supply plugged in. I'm able to get it to start binding to the point where the led will be blinking slowly, ~1 time per second, but the receiver never says "RXBind OK." I've been looking online for over 2 hours and haven't found anybody else with this same issue.
I have a fly ski T6 remote and I'm trying to bind a FS ia6 receiver can you help me with this
Can I bind my FS-T6 transmitter to my FS-iA6B reciever?
I knw the video is 2019 but my power supply is a Li-poly RC Battery 7.4V 8C 2000 mAh, and the wire lay out is red- white and black so is that going to be a problem?
Will it bind to my spectrum receiver? And do you have to have a motor controller?
Hi! Just now saw this. No, this will not bind with Spektrum transmitters. And no, you do not necessarily have to have a motor to use this setup and control the servos. But if you don't have the motor esc to power the receiver and servos, you will need a seperate voltage regulator to power the receiver and servos at 5 volts.
I did exactly what you did here but smoke started coming out of the receiver when I plugged the XT60. What battery are you using? I think I am using the wrong battery.
oh no! It shouldn't have anything to do with the battery if you plug into the ESC 5v servo connector.
In IA6 the reciver light is flassing fast only if i turn binding on in transmitter. I dont knov what to do. HELP ME!!!
Will FS i6 Tx bind to FS CT6B Rx?
how do i bind a umx ultrix to my flysky fs-ia6
So I can bind a fs ia10b with my taranis x9d plus ?!
Thanks
Hi! No, Flysky receivers can only be used with Flysky radios (or multi-protocol radios like the Jumper brand), and vice versa.
Sir. can we bind fsia6b rx with ct6b tx.......?
Hi i want to build a drone f450 with the flysky x6b and apm 2.8 plz help me out right now i have purchased everything for this project but just apm is remaining to buy
Hi! Great! But I'm not sure what apm 2.8 is?
Need i to install the whole adapter into the drone? Im need to fpv help😞
Hi! What quad do you have?
how i can contact omphooby m2 binding with my flysky i6x ?
Will any frys ky recevers work with this radio?
No, only Flysky brand (or aftermarket receivers that use AFHDS 2A protocol).
I'm going crazy! Need help! I bought a new eachine cinewhoop. I had a Flysky i6 transmitter and I bought a Flysky x6b receiver. I can't get the bind light to even come on. I've tried several things. Do I even have the receiver plugged into the flight controller correctly? I just used the already attached wire from the flight controller and plugged it into the x6b ibus port. The receiver gets very hot and does not bind. Please help! Thank you!
Hi, William! Email me some photos of it to RCwithAdam @ Gmail.com and I'll do what I can to help.
@@RCwithAdam1 thank you so much I will do that!!
Don't forget to have your TX protocol set to the installed RX method.
Hi! You know, that's a good point, but I actually haven't been able to tell a difference (which is weird because, I'd thought it would!). I'll have to investigate further.
Perhaps it's only for PPM output. My apologies.
System. -> RX Setup -> PPM settings
How to apply x6b receivers to apm?
Hey Adam, Im trying to bind my frsky r-xsr with my flysky fs i6x. The r sxr wont go into bind mode. When plugged in with a lipo and bind held all the red green and blue lights are solid, all on. I have my flysky set to PPM and SBUS. What am i doing wrong ?
Hi, N7! Unfortunately FRsky and FlySky are not compatible brand (They use different radio protocols).
@@RCwithAdam1 dang. my mistake. thanks for the quick reply man, you rock
Ciao volevo un informazione.... è possibile accoppiamento tra TX fly Sky e RX radio link
Mi puoi aiutare grazie
I've been watching a few of your Videos on the FlySky FSi6 Radio, which I'm brand new to. 😖
I have a second FSi6, that I fly my Foamies with (sorry!! Not a hardcore Flyer 😋).
This one in question, I'm using for 1/14th Scale RC Semi Trucks.
In the Video, you said that I could Bind any FlySky Reciever to this TX!
What about a THREE Channel?
I've got the i6B in the Truck itself, but I also want to operate the Lights, Signals, Brake Lights - on the Trailer - wirelessly, with the 3ch Reciever. 😳
Now, Binding two RXs simultaneously to one TX is the easy part for me...
Both sets of Turn Signals will run on Ch 1, and the Brake Lights on Ch 3.
..... I don't NEED 6, 8 or 10 channels in the Trailer, obviously.
Will a FS GR3E Bind to my FSi6??
Your Videos have been invaluable so far!! 👍👍
Hi, Carmine! Yes, you can use the GR3E rx! But you have to change the rx setting for that model profile to the older AFHDS protocol, as you can see in this video: ruclips.net/video/Rj0ndZxJ7is/видео.html .
I don't know what mdole I'm saposto to pic fro a ZMR250?
I have bind the same receiver on model 1 and model 2. How to remove receiver from model 1? I tried "model reset", it reset all the settings but the receiver still conect to model 1.
As far as I know, that model profile will stay bound with that receiver until you bind it with a different receiver.
Can I bind a fs-ia10b receiver to a fs-t6 transmitter I've tried your way a few times and didn't work
Fs-T6? No. The T6 is only compatible with the older AFHDS radio protocol while the ia10b uses the newer AFHDS2A protocol. Here's a link to flysky's website where they show all the receivers www.flysky-cn.com/receivers
How far is the signal? X6b receiver with fs i6 transmitter pless replay bro
Could you tell me how to connect FS-iA6 with PIXHAWK 4
Hi! Unfortunately, no. I don't have any experience with the PIXHAWK 4.
RCwithAdam Hi, can FS-iA6 GIVES PPM OUTPUT CAN I USE PPM ENCODER TO USE IT IN PX4 if you know that by any chance .!
do these receivers work on the FS-I6X
please help
Yes
is this fs i6 can bind with other receiver?..
Yes.
How can connect betafpv X85 V2 cinewhoop to flysky i6?
Pnp
Hey rc Adam I have a problem with my I6x not binding with a plane of mine I don’t know what receiver it is but I can’t take the receiver out to see. the plane does have a remote that came with the plane. The Plane it’s really small and has a really small receiver. The plane called volantexrc it’s a beginner plane. If you ever see this comment please help me with this it would be very helpful
Hi! Sorry for the delay! Is it still not working?
Ya it’s still not working but thank you for getting back
Hello can I bind a flysky receiver with a taranis?
Hi! No. Unless you are using an aftermarket multi-protocol transmitter module in the Taranis.
i have a boat i have a transmitter for fs gt3b and wont bind
Work it wit the XSR
What about receiver Model No: FS-R6B ??
What would you like to know about it?