How to Service an AWD Haldex Audi TT / MK4 R32

Поделиться
HTML-код
  • Опубликовано: 27 ноя 2024

Комментарии • 57

  • @oricagreenedge9279
    @oricagreenedge9279 3 года назад +6

    Thx for the nice video! Please make more from the TT mk1 😍
    There is a nice trick I've learned from a friend: put the oil tube in the freeze for 24h before pressing it into the Haldex.
    It will reduce a little bit the mess when putting back the screw on. 🤟

  • @brianbuc3687
    @brianbuc3687 3 года назад +2

    Appreciate the demo on fishing the filter out of that tight spot, made it easy for me this time around, getting the filter back in just as easy.

  • @evansutherland8060
    @evansutherland8060 5 лет назад +7

    You can freeze the new oil to make it thicker ,PS also a decent drive before hand is good to warm up the old oil for draining

  • @aronbennett4760
    @aronbennett4760 5 лет назад +2

    Thank you folks at DAP. You guys just made my life easier.. I agree with Rui Almeida, more MK1 TT225 vids.

  • @ruialmeida5217
    @ruialmeida5217 5 лет назад +18

    make more vids with this tt225 plz!

  • @dydxeq0
    @dydxeq0 3 года назад +1

    And my Audi Dealer wanted to charge me $650 for this service... doing it myself!! Thanks

  • @DPCPhotog
    @DPCPhotog 3 года назад

    Wow, and I was thinking it was difficult and very involved. Thanks DAP!

  • @TOPTRADER007
    @TOPTRADER007 5 лет назад +3

    Can you do a video on Servicing and Replacing Front Differential Fluid on a 2004 R32 or 2008 R32 or A3 3.2 Quattrro or TT 3.2 Quattro ??????
    Everone Seems To Miss This Service or Don't Know Anything About It

  • @takeomack2782
    @takeomack2782 5 лет назад

    Could have used this video when I still had my R32! Great video though Paul! 👍❤️

  • @HourGlassLife
    @HourGlassLife 5 лет назад

    Thanks for teaching me about my car

  • @CatonsvilleCentralRwy
    @CatonsvilleCentralRwy 5 лет назад +13

    Up next: filling your engine oil via the drain plug

    • @kaziadz
      @kaziadz 4 года назад +3

      This is the correct method in which to fill following manufacturer specifications... twat

  • @drewmurray2583
    @drewmurray2583 2 года назад

    this is why I keep seeing Audi TTs with only the front wheels spinning.

  • @johnnycashh7148
    @johnnycashh7148 3 года назад

    Thanks for sharing your knowledge. What should this service normally run $ ?

  • @A4orce84
    @A4orce84 5 лет назад

    Great job guys!

  • @se1663
    @se1663 5 лет назад +1

    Please do this for Mk6 R!

  • @darronclarke414
    @darronclarke414 5 месяцев назад

    Wonder if it's possible to fill new fluid where the filter goes

  • @xcandiottix
    @xcandiottix 3 года назад

    I'm about to pull my MK1 haldex out to rebuild it. Any idea on where I can get new clutch packs? Car is just used at the track so an upgraded set would also be cool.

  • @kawahbunga
    @kawahbunga 6 месяцев назад

    Thank you Based Paul, please take my first born

  • @mrzx626
    @mrzx626 5 лет назад +2

    more tt please

  • @HourGlassLife
    @HourGlassLife 5 лет назад +1

    What did you do about the engine codes you pulled when you first inspected the car?

  • @markmuller8829
    @markmuller8829 5 лет назад +7

    Doing this on axle stands isnt much fun. A car hoist makes things so much easier! Beware also that when you remove the nozzle to place the 5mm screw back in, if you don't get it in square and start threading it quickly, all the new oil will leak out very quickly...... ask me how I know 🤨

    • @HourGlassLife
      @HourGlassLife 5 лет назад

      Mark Muller lol I have been there my self man.

  • @RobS32
    @RobS32 2 года назад

    Simples. Thanks 👍

  • @eliwalker8410
    @eliwalker8410 Год назад

    Can’t find any front differential tutorials or info for a 5 speed manual tt and idk if any of y’all have maybe or know where the filter is/if there’s a filter I saw one video where they said there was one but I did not have one in that location, I’m confident in the Haldex service just not sure about front half

  • @musabhuiyan9940
    @musabhuiyan9940 5 лет назад +2

    I tried this method and it is the way recommended by everyone including autodata and was a big mess just seems ridiculous why you can't just fill from level hole

  • @johnsalazar1932
    @johnsalazar1932 3 года назад

    Say bro what's those wheels you got on it size and brand I have a 01 Audi TT Quattro not think they look nice thanks for your time

  • @evansutherland8060
    @evansutherland8060 5 лет назад +3

    Don't you love when people say (the drivers side or passenger side) like everyone in the World drive on the same side ,it's not so bad in a video because you can work it out but in forums is just the worst

  • @oldkid6
    @oldkid6 4 года назад

    How often does the Haldex on an R32 need to be serviced?

  • @paintballsmrf
    @paintballsmrf 21 час назад

    Link to the wheels?

  • @boola13411
    @boola13411 4 года назад

    This process is the same for 2011 Audi tt Quattro correct?

  • @loganclaproth
    @loganclaproth 3 года назад +1

    is this possible with jackstands?

    • @Dr.Smartbrain
      @Dr.Smartbrain 3 года назад +1

      You’d probably need some kind of short hose extension because going straight in, you’d have to have the car up,pretty high. Call body shops or garages and ask if you can borrow their lift for 20 minutes.

  • @wafi3187
    @wafi3187 5 лет назад +13

    Why am I watching this? I have torsen

    • @Deutscheautoparts
      @Deutscheautoparts  5 лет назад +10

      The more you know......

    • @j_white1305
      @j_white1305 5 лет назад

      Ha, same here.

    • @T.e.d.d.y.
      @T.e.d.d.y. 4 года назад

      @@Deutscheautoparts Guys, is there any mechanical or software difference between haldex 1 in A3 and S3/TT and between standard Golf and R32? Performance of haldex 1 in sporty versions looks better...

  • @kameronp.707
    @kameronp.707 5 лет назад

    So what does my B8 S4 have?

  • @HockeyMasterBroHMB
    @HockeyMasterBroHMB 5 лет назад

    what about the audi s3 8l? i have one and winter is coming

    • @rkan2
      @rkan2 5 лет назад

      Isn't it exactly same as this TT?

    • @HockeyMasterBroHMB
      @HockeyMasterBroHMB 5 лет назад

      @@rkan2 I believe so, the body is different but the drive train is exactly the same yes. I just want to be sure before I spend my money

    • @captiansparkles8139
      @captiansparkles8139 5 лет назад

      The tt 8n and s3 8l are identical

  • @donbrashsux
    @donbrashsux 5 лет назад +8

    Why wouldn’t they have a separate plug hole to refill the haldex..doesn’t seem very German..where’s the haldex manufactured..?

    • @captiansparkles8139
      @captiansparkles8139 5 лет назад +1

      Haldex is a swedish company

    • @visualblur
      @visualblur 5 лет назад

      They do, its on the driver side but theres a piece that can get lost inside and would require removal and opening up haldex unit....🤷‍♂️

    • @donbrashsux
      @donbrashsux 5 лет назад

      Vince C Awesum engineering you might say then..

  • @HockeyMasterBroHMB
    @HockeyMasterBroHMB 5 лет назад

    Did anyone else buy the oil but it came in a jug rather than a bottle with a nozzle like in the video and advertised on the website ?

    • @kaziadz
      @kaziadz 4 года назад

      Complain and get them to send the correct one

  • @shemmo
    @shemmo 5 лет назад

    "crack it loose" :D

  • @vagike
    @vagike 5 лет назад +1

    Is there a service interval for the bevel box?
    What fluid is used in the bevel box?

    • @visualblur
      @visualblur 5 лет назад

      75w90. Same if you have a 02m 6spd. Oem fluid.

    • @visualblur
      @visualblur 5 лет назад

      ....100k change interval

  • @bca-biciclindcuaxel7527
    @bca-biciclindcuaxel7527 5 лет назад

    I have room in that car only if I cut legs.

  • @Gjon777
    @Gjon777 5 лет назад +10

    Audi/VW made these cars horrible to service

    • @shemmo
      @shemmo 5 лет назад

      they are not that horrible if you know what to do.. there are more difficult and overengineered cars out there :)

  • @РоманПлетнев-г3э
    @РоманПлетнев-г3э 3 года назад

    what a stupidly engineered system