Wii Homebrew USBLoaderGX install and setup - play games from USB

Поделиться
HTML-код
  • Опубликовано: 5 ноя 2024

Комментарии • 305

  • @aj6807
    @aj6807 10 месяцев назад +11

    After so many issues and many videos you have help greatly, I think i've finally cracked it.

    • @BytesNBits
      @BytesNBits  10 месяцев назад +2

      Great. Enjoy the games.

  • @3DPrintSOS
    @3DPrintSOS 8 месяцев назад +1

    Thank you for walking us through this. I was stuck on the naming convention and couldnt figure It out. The app made it easy and you did a great job pointing us in the right direction. Now I just need to figure out the wifi and we’re golden!

    • @BytesNBits
      @BytesNBits  8 месяцев назад +1

      Glad it helped! Hope you get the WiFi working.

    • @3DPrintSOS
      @3DPrintSOS 8 месяцев назад

      Got it working from my phone's hotspot but not from my router. Not sure why. No worries though as I only wanted it to download some missing box art for a handful of games. Now, I’m happy. @@BytesNBits

    • @x4KRyanx
      @x4KRyanx 6 месяцев назад

      @@BytesNBits Just followed the tutorial again after using the file you gave me and it still takes me to the homebrew channel when i try to play the game.
      One thing is, can the amount of storage effect this? I got 14.40GB of 14.71GB

  • @windows6k603
    @windows6k603 5 месяцев назад +1

    I have watched videos and read all sorts of guides... and this is the ONLY video that worked for me. Thank you soooooo soooooo much!!!!

  • @zoroacuna3915
    @zoroacuna3915 4 месяца назад +2

    after all these other "tutorials" this is the one ! thanks for making it easy for me to understand god bless.

    • @BytesNBits
      @BytesNBits  4 месяца назад +2

      You're very welcome!

  • @brazjhanbarbeau3969
    @brazjhanbarbeau3969 7 месяцев назад +2

    You are awesome dude. This worked for me. April 2024

  • @BBGS11_Lego
    @BBGS11_Lego 8 месяцев назад +20

    I have this issue where none of my games load. Everything worked perfectly, I go to open a game, and it starts to load, but the screen just goes black. The wii is still on.

    • @BytesNBits
      @BytesNBits  8 месяцев назад +6

      It might be a display setting. Have a look in the USBLoaded settings and play with the video output settings.

    • @BBGS11_Lego
      @BBGS11_Lego 8 месяцев назад

      ​@BytesNBits Haven't been able to work on it recently, but I found that once I load a game, my tv goes black for 5-7 minutes, then just loads the wii menu and takes me out of USB GX

    • @sid-yoma
      @sid-yoma 7 месяцев назад

      @@BBGS11_Legosame

    • @bryanalvarezii4154
      @bryanalvarezii4154 7 месяцев назад

      @@BytesNBits I’m stuck, when I download a game from vimm and try to put it into backup manager it doesn’t submit as a wbfs format i think mine as well ends in a Tz format how do I format to wbfs?

    • @ash1canty
      @ash1canty 6 месяцев назад

      I had the same issue with the 7-10min wait time black screen. On my flash drive (256gb sandisk). But switching to just my sd card (64gb sandisk) the games load immediately. The wiihacks website recommends only using sd cards or hard drives.

  • @carl2long
    @carl2long 10 месяцев назад +3

    These videos are super helpful, thank you!

    • @BytesNBits
      @BytesNBits  10 месяцев назад

      Glad you like them!

  • @Skibzirizz
    @Skibzirizz 3 месяца назад

    Finnaly a straightforward guide that works thanks man!

  • @Cheezer3089
    @Cheezer3089 8 месяцев назад +1

    Thanks for the wonderful video , it worked 😊 .
    Btw , if fat32 is not showing up on the wii , just insert the usb in the other slot

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Great. Thanks for the tip.

    • @elpipes1361
      @elpipes1361 5 месяцев назад

      What if my USB only uses exFAT or NTFS

    • @Cheezer3089
      @Cheezer3089 5 месяцев назад

      @@elpipes1361 Think you will have to format it to fat32

    • @lewismaskell3247
      @lewismaskell3247 4 месяца назад

      ​@@elpipes1361dont know if im late but this might help other people i tried using exfat format but doesnt seem to show in the loader soni found a 3rd party software that lets you manually format ot to fat32 and it finally showed in the loader

    • @TheHobbyKid1
      @TheHobbyKid1 3 месяца назад

      @@lewismaskell3247 what software did you use

  • @psittack
    @psittack 6 месяцев назад

    Absolutely FANTASTIC video. Thanks so much for making something so daunting so easy to follow! :)

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      Glad you enjoyed it!

  • @MidnightDream034
    @MidnightDream034 3 месяца назад

    I love your channel, I've used your guides to help mod several consoles. Do you know a way to play gameboy games on your modded Wii??

    • @BytesNBits
      @BytesNBits  3 месяца назад

      try this one - wiibrew.org/wiki/Visual_Boy_Advance_GX

  • @elpops2000
    @elpops2000 6 месяцев назад

    Amazing tutorial my man it is my second wii that I hacked and this one got me to do it no problem! a huge thank you:)

    • @BytesNBits
      @BytesNBits  6 месяцев назад +1

      Glad I could help!

  • @skeenwalker
    @skeenwalker 7 месяцев назад

    Took a couple hours to manage everything but worked like a charm!!! Thank you sir !!!

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      Glad it helped! Have fun!

  • @doodlyboy15
    @doodlyboy15 2 месяца назад

    Awesome video, thanks! Just started getting into this, I already have your gc video up as well and am ready to get everything running. I was having an issue with installing the d2x cios installer. Turns out I had the entire folder in the root instead of only the required wad files, embarrassing but easily fixed.

    • @BytesNBits
      @BytesNBits  2 месяца назад

      Thanks. Glad you got it sorted out. Have fun!

  • @Heaven_LogIn
    @Heaven_LogIn Месяц назад

    im so glad that you respond to the comments which gives me a spark of hope unlike alot of the other tutorials but how can i find download files? vimms lair removed the downloads for the wii games so it doesnt work PLEASE HELP!!!!!

    • @BytesNBits
      @BytesNBits  Месяц назад

      try this search - but keep it quiet!! roms megathread

    • @Heaven_LogIn
      @Heaven_LogIn 26 дней назад

      @@BytesNBits LIFESAVERRR

  • @tylershull1289
    @tylershull1289 8 часов назад

    I have done everything, but loader GX just keeps loading an empty screen with the background but no buttons or menus. Nothing more I can do. Any ideas?

  • @BIGACE-11
    @BIGACE-11 8 месяцев назад +2

    When I go to add all my game files to my wii backup manager, it just says 100.00% and finished but never puts it onto the actual screen. Please help

    • @BytesNBits
      @BytesNBits  8 месяцев назад +1

      Check your rom files are OK and that you're extracted them form any archive files they may be saved as.

  • @law79350
    @law79350 4 месяца назад

    MAN YOU'RE A LIFE SAVER!!!!!!!!! This is the only video that made sense!!!!!!!! THANKS

    • @BytesNBits
      @BytesNBits  4 месяца назад

      Glad you found it useful.

  • @AlexRodriguez-wq3cj
    @AlexRodriguez-wq3cj 5 месяцев назад

    Really good tutorial thank you so much

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      You're very welcome!

  • @kennydixon5054
    @kennydixon5054 10 месяцев назад

    Thank you so much for all of your help! These videos have been a godsend! Can I transfer the game files to the usb drive manually? I currently have no access to a windows computer, so I'm stuck with my chromebook. My game files are already in the wbfs format. Thank you again!

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      I think you need to use a specific folder and filename convention. It will probably be detailed somewhere on the web. You can always just try copying the files into the wbfs folder and see what happens.

  • @protuc995
    @protuc995 4 месяца назад

    amazing video but, where can I find those videogames tho? Where I find the link to download them on the pc so I can transfer them on the usb/driver?

    • @BytesNBits
      @BytesNBits  3 месяца назад +1

      They are getting a bit harder to find these days as Nintendo have recently been closing down rom sites. Have a look around in Archive.org.

    • @protuc995
      @protuc995 3 месяца назад

      @@BytesNBits I'm gonna take a look, thx man ☺

    • @alfiestanier5891
      @alfiestanier5891 3 месяца назад

      @@protuc995try vimms lair and convert the game format

  • @CedBan
    @CedBan 9 месяцев назад +2

    I did everything correct I installed the cios correctly and everything but whenever I load any game it goes pitch black

    • @Omer-r6h7m
      @Omer-r6h7m 9 месяцев назад

      Happend to me too try to find a tut in youtube

    • @BytesNBits
      @BytesNBits  9 месяцев назад +2

      I did have a similar problem on one game. I think in the loader settings I had to either turn off or on the 480p pixel fix setting. I guess there may be a few setting conflicts with some of the games.
      Other things to try are reloading the cIOS and trying different downloads of the game files.
      The other option is to use another USB loader like WiiFlow. I'll probably do a video on that soon.

  • @iCeMaNtHeBeSt
    @iCeMaNtHeBeSt Месяц назад +1

    Buddy i wanna know what is the sata cable usb you use? that one need power from the wall?

    • @BytesNBits
      @BytesNBits  Месяц назад

      The cable powers the hard drive over the USB link so just plug it in and go - at least with ssd or 2.5in laptop drives. I buy mine from Raspberry Pi outlets as they tend to test their sata converters to make sure they work with the Raspberry Pi which sort of means that it will work with most things. In the UK I use thepihut.com/ but there will be similar outlets where you are.

  • @colin109
    @colin109 9 месяцев назад

    Nice thanks mate...worked for me

  • @autobotoctolingthomasho3362
    @autobotoctolingthomasho3362 4 месяца назад

    sorry y'all that I kept disturbing you guys, but I have a situation. I'm using SWNW01 Super Mario Bros Wii to put on USB loader GX. I used cleanrip to pull the related iso files, and combined it by cmd, then used the Wii backup manager to turn the combined iso to wbfs, then I started World 1-4, and the game crashed every single time (further context: the game DOES load, but always crashes whenever i try to beat a level, or crashes when i start another level, oddly enough, toad houses and enemies from the Mario navigation map don't crash)
    I have swapped the flash drive to use an external hard drive, updated USBloader GX several times, the CIOS was changed from "v10 beta52 d2x-v10-beta52" to "d2x-v11-beta1", enabling the NAND saves emluation to put saves to my USB(which caused my previous saves to be gone, but that's fine),re-ripped the game 3 times, but still the issue still persists
    Some people told me that usb type c may have caused the game to crash, is it true

    • @BytesNBits
      @BytesNBits  4 месяца назад

      Have you tried downloading a version of the game to see if it's your rom dump or the Wii homebrew that's causing the issue.

  • @GreatYosef69
    @GreatYosef69 8 месяцев назад +2

    Hey I got an issue. The USB loader is not detecting the USB at all. It keeps detecting "Unknown" and not fat32. Can anyone help me with this?
    (Edit): Can the apps and wad folder be in the same USB thumbdrive as the wbfs folder?

    • @BytesNBits
      @BytesNBits  8 месяцев назад +1

      If you go into the USBLoader settings can it see the USB drive in the drives section? Some usb devices aren't compatible with the system. Try a different usb drive if you can to see if it's that.

    • @GreatYosef69
      @GreatYosef69 8 месяцев назад +1

      @@BytesNBits Alright. Thanks mate

  • @andrewferguson7762
    @andrewferguson7762 10 месяцев назад

    Learned a lot thanks again

    • @BytesNBits
      @BytesNBits  10 месяцев назад

      Glad you found it useful - GameCube gaming coming next!

  • @Jess-yq8sc
    @Jess-yq8sc 6 месяцев назад +1

    The game runs fine, but at some point, it freezes completely along with the console. I can't access the menu. What should I do?

    • @BytesNBits
      @BytesNBits  6 месяцев назад +1

      Is this for all games? Does it do the same for disk games? It might be a console issue. Try leaving the system running without starting a game. Does it lock up in idle mode?

    • @Jess-yq8sc
      @Jess-yq8sc 6 месяцев назад

      @@BytesNBits Yes, it does happen in all games. Disc games work perfectly fine. No, the Wii doesn't lock up in idle mode, it just freezes, and I'm forced to unplug it.

  • @umutkayacan7659
    @umutkayacan7659 10 месяцев назад

    Very nice vid as allways

  • @phoenixrivera6715
    @phoenixrivera6715 7 месяцев назад +1

    I’m having a problem where when it recognizes my USB and I tried to press back it doesn’t let me go back

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      Does the console lock up? Make sure you've got the cIOS mods installed from the first setup video or have a look at the ModMii video - ruclips.net/video/8RdwHT3C16E/видео.html

  • @penvegan
    @penvegan 6 месяцев назад

    I did it ty sir was hard without windows used Linux at first then used windows too

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      Great to hear you got it working.

  • @JulyScofield-do9si
    @JulyScofield-do9si 6 месяцев назад +1

    I'm thanking about Format It.

  • @Joshuaaaa62754
    @Joshuaaaa62754 7 месяцев назад +1

    im on wii backup manager but theres no download link i think the site changed what do i do now?

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      There's a link on this page wii.hacks.guide/wii-backups

  • @cozeeyt
    @cozeeyt 8 месяцев назад +1

    can you do this with just usb and no sd card?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Yes. Have a look at my ModMii video - ruclips.net/video/8RdwHT3C16E/видео.html

  • @manbun_tech7417
    @manbun_tech7417 6 месяцев назад +1

    Can this be done all on a usd drive instead of a sd card?

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      Yes. Just put everything onto the USB drive using the same folder structure.

  • @erecto_patronum
    @erecto_patronum Месяц назад

    Edit: Nevermind. I had 2 microSD of the same name.
    I don't have a Windows OC so I used my Chromebook laptop. I've done everything other than using the program for wbfs so I manually edited each files and put them into separate folders. Following this tutorial, while matching the same settings in the USB Loader, my Wii doesn't detect the USB Drive (it still shows 0.0GB of 0.0GB free at the bottom)

    • @BytesNBits
      @BytesNBits  Месяц назад

      Hope you've got it going now.

    • @erecto_patronum
      @erecto_patronum Месяц назад

      @@BytesNBits Yep. I just had to select the second sd card with the same name. All my Wii and NGC games are showing up.

  • @ductator4479
    @ductator4479 2 месяца назад +1

    Vimms lair has removed majority of the games, is there any other sites that would work?

    • @BytesNBits
      @BytesNBits  2 месяца назад +1

      Nintendo et al hit a few of the most useful sites. The Internet Archive is probably your best bet at the moment.

    • @ductator4479
      @ductator4479 2 месяца назад +1

      @@BytesNBitsdang, also ive run into a problem, been bouncing between ur vids trying to fix a problem with the dsx cIOS installer, ive got it up on the wii with good internet connection but i keep receiving a tcp_timeout till the point it fails and the slot is red, ive saw other vids of people using different base and slots but i just don’t understand, any suggestions?

    • @dezmounts978
      @dezmounts978 Месяц назад

      @@ductator4479It won’t work, try to use modmii to reinstall everything, it’s a pain in the ass to do the process all over again, but it works garuanteed

    • @Heaven_LogIn
      @Heaven_LogIn Месяц назад

      @@BytesNBits i went to internet archive but it says that the games cant be downloaded cuz of nintendo..what do i do!!!!

    • @BytesNBits
      @BytesNBits  Месяц назад

      @@Heaven_LogIn Have you tried a few different posts on the Internet Archive. Some might not be blocked. Other than that it's going to have to be a search around. It's getting harder to find reliable sources!!

  • @cal5964
    @cal5964 3 месяца назад

    I use a Hard drive instead of a flash drive do I need a power supply for the hard drive or is USB to the Wii enough

    • @BytesNBits
      @BytesNBits  3 месяца назад +1

      I use a mechanical laptop drive on mine powered from the usb port. Not sure if a full sized one will work but give it a go. SSD is fine.

  • @SebastianAndreOF
    @SebastianAndreOF 4 месяца назад +1

    why don't my games work? I start them and they just send me to me Wii main home menu

    • @BytesNBits
      @BytesNBits  4 месяца назад

      Make sure you've got all the cIOS files installed. If that all checks out try a different usb drive. Some aren't compatible.

  • @amurray4036
    @amurray4036 10 месяцев назад

    You can keep,only the game partion via the setting on the wii backup manager prog

    • @BytesNBits
      @BytesNBits  9 месяцев назад +2

      Thanks for the tip. I'll have a look.

    • @amurray4036
      @amurray4036 9 месяцев назад

      @@BytesNBits also check out wbfs manager for the wii aswell,that can reduce wii game data,for the external hdd

  • @sabrynajones1771
    @sabrynajones1771 9 месяцев назад +1

    Is there a reason we cant store the games on the same SD drive versus a thumb drive or external hard drive?

    • @BytesNBits
      @BytesNBits  9 месяцев назад +1

      No. That's perfectly fine.

  • @marvinkurzmanowski5645
    @marvinkurzmanowski5645 3 месяца назад

    may you be inclined on explaining how to let usb loader launch games off of an sd instead of usb?

    • @BytesNBits
      @BytesNBits  3 месяца назад

      Thanks for the tip
      I might make a short video on that later.

  • @BassMusicBass1232
    @BassMusicBass1232 8 месяцев назад +1

    When i go in to play it returns me to wii menu. What should i do?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Check your rom files are ok by running them in the Dolphin emulator. Is it for all games?

  • @pub_scrubs
    @pub_scrubs 3 месяца назад

    i have question. my old wii console is version 4.1U, and it already have homebrew channel, neogamma, and uloader installed (i think it was installed by the seller). will this guide still work ?

    • @BytesNBits
      @BytesNBits  3 месяца назад

      I'd try this tutorial. It should overwrite the old hack. ruclips.net/video/8RdwHT3C16E/видео.html

  • @JudSteele
    @JudSteele 9 месяцев назад +1

    how would I put WiiWare WADs into this backup manager?

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      I haven't looked into WiiWare yet. Maybe later.

  • @TheKing-cn6sn
    @TheKing-cn6sn 9 месяцев назад

    This helped a lot but I having trouble when I want to install the usb forwarder on my wii it saying “this title wants IOS58 but the installed version is a stud” I have tried different tutorials but they seem to not have this problem

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      Did you follow the initial hack setup video. That takes you through the cIOS setup where you install IOS58.

    • @TheKing-cn6sn
      @TheKing-cn6sn 9 месяцев назад

      @@BytesNBits yea and it stills say error but I thinking of resetting it

  • @grabgame1828
    @grabgame1828 24 дня назад

    when i add games (as files) to wii backup manager, it says adding files 100% and finished to the right side but doesnt come up as a checkbox like in the video. Note that i downloaded from vimms lair and they are formatted as winrar files for some reason

    • @grabgame1828
      @grabgame1828 24 дня назад

      Update, i found a way to convert it into a wbsf file but i still get the same problem, when i check the logs it says "invalid partition header" and "invalid disc", could you help me?

    • @BytesNBits
      @BytesNBits  22 дня назад

      It sounds like either the disc image is corrupt or your USB drive isn't formatted correctly.

    • @grabgame1828
      @grabgame1828 22 дня назад

      @@BytesNBits i’m using a sd to usb converter

  • @DeathDecider
    @DeathDecider 4 месяца назад

    mine works fine when i first start the wii, i can load GX and play the games. but as soon as i exit a game the it brings me back to the loader it fails to load the games on the USB despite knowing a USB is attached?

    • @BytesNBits
      @BytesNBits  4 месяца назад

      That's an odd one. I guess something is not shutting down correctly but I've not come across this error before. Have you had a look through the troubleshooting guide?

  • @wjao427
    @wjao427 3 месяца назад

    Do you know any other websites to get the games ?

    • @BytesNBits
      @BytesNBits  3 месяца назад

      There's been a bit of a crackdown on ROM sites lately. You'll need to have a search around. Try archive.org.

  • @esperaccelerator8404
    @esperaccelerator8404 9 месяцев назад

    i came here looking for a way to use both the usb and sd card to hold games. i had one file on both devices. i can't find a way to use them both at the same time but what i do is keep all the mods and other files on sd card and have wbfs games on usb. if your games aren't showing up on usb go into hard drive settings and turn of sd card mode. thats what i did and my usb game files showed up.

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      Thanks for the tip. That's how I set mine up as well.

  • @WarioWare-r8r
    @WarioWare-r8r 7 месяцев назад

    Im having an issue, where when I try to start a game it takes me back to the Homebrew Menu instead of going into the game.

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      Make sure you've got all the cIOS installed. If that's all OK try checking your iso images by running them with the Dolphin emulator. Hope you get it going.

  • @Randywebb-sz9vo
    @Randywebb-sz9vo 23 дня назад

    My usb drive don't show in the wii manager just shows on my pc

    • @BytesNBits
      @BytesNBits  22 дня назад

      Make sure it's formatted as an FAT32 drive. Try using another USB drive - not all are compatible with the Wii. Make sure you've got it plugged into the correct port - please see the video. If nothing works it might be that your usb port isn't working.

  • @Zeddwolff
    @Zeddwolff Месяц назад

    Where do I get these games? I download them but they're not that format

    • @BytesNBits
      @BytesNBits  25 дней назад

      It's just a matter of searching around.

  • @Melegna7021
    @Melegna7021 8 месяцев назад

    For some reason, clicking "Game/Install Partition" gets me stuck on this menu and it still says "Not Initialized" after a while.

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Try powering down the Wii and trying again. If it's still not seeing the drive maybe try a different USB drive - not all are fully compatible.

  • @trishmccumber4990
    @trishmccumber4990 3 месяца назад

    Hi...Followed all your steps, all the games show up but when I go into a game and press start it throws me back to the Homebrew channel. All games are loaded on to the usb as your instructions. Feeling bit confused. Can you help please 🙏
    Cheers

    • @BytesNBits
      @BytesNBits  3 месяца назад

      You can try this other version - ruclips.net/video/8RdwHT3C16E/видео.html. It will install a fuller range of cIOS and other software which may help get you round the problem.

  • @knightrider4352
    @knightrider4352 8 месяцев назад

    I’m having an issue where it gets stuck on initializing the hard drive/USB drive. I it was working but the games wouldn’t load, so I reinstalled the loader and now having this issue

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      Have you tried initialising the drive from the usbloader settings

    • @knightrider4352
      @knightrider4352 7 месяцев назад

      @@BytesNBitsyea. When I click on Game/Install partition it just locks up and I have to power cycle the Wii. I will try a fresh install following your other video and see if I can get it to work.

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      @@knightrider4352 Sounds like a plan!

  • @alfiestanier5891
    @alfiestanier5891 3 месяца назад

    What is the software used ti change the hardrive settings?

    • @BytesNBits
      @BytesNBits  3 месяца назад +1

      Minitool Partition Wizard

  • @brazjhanbarbeau3969
    @brazjhanbarbeau3969 7 месяцев назад

    How can I make it stick these settings all the time. Everytime I load in, I have to re apply these settings for it to pick up the games

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      I had a similar problem with one of my ssd drives. I found that powering down the system made the SSD fail to initialise on boot up. Leaving it in standby mode (press the power button on the WiiMote) worked.

  • @JoT_Meele
    @JoT_Meele Месяц назад

    it says that the wii backup intaller wants to make changes to my device to run. Should i let it?

    • @BytesNBits
      @BytesNBits  Месяц назад

      If you've followed the links in the video that will take you to a reputable download. Still make sure that you've got your anti virus and firewall protection enabled.

    • @JoT_Meele
      @JoT_Meele Месяц назад

      @@BytesNBits it works but when i change the installer changed to my fat32 it wont let me leave the global settings

  • @33r44yt
    @33r44yt 9 месяцев назад

    Do you reckon you could help i got the game in the usb loader but but i click on it nothing happens, i can still move the cursor around but nothing happens and the only way to exit and fix it is by unplugging the wii

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      I'd start by checking you've got everything set up correctly. CIOS installed and set up, game files copied to your USB through the backup manager, etc. If that's all ok try a couple of different games. If none work you might have to reinstall USB loader. If some work it might be some of your game files are bad.

    • @33r44yt
      @33r44yt 9 месяцев назад

      @@BytesNBits ok thanks ill try it out

  • @MrByrnesey
    @MrByrnesey 5 месяцев назад

    Hi, I have my game files backed up and they used to work but for some reason now when I press the start button on the game load screen it doesn't react, and then I need to shut down because it wont even let me exit that screen.Any advice?

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      I'm not sure why it would stop working. is the USB drive OK? Can you read it in your PC?

  • @spyplays9574
    @spyplays9574 10 месяцев назад +1

    how do you add games on the wii u's wii menu???

    • @BytesNBits
      @BytesNBits  10 месяцев назад +1

      I'm assuming the WiiU works in a similar way. You need to generate a WAD file to create a link to the game in USBLoader. I think there are other videos on how to do this.

    • @spyplays9574
      @spyplays9574 10 месяцев назад

      @@BytesNBits Thank you🫡

  • @Walkertouge
    @Walkertouge 2 месяца назад

    Um i domt know why but i cant play any of my games, i was able to follow your tutorials all the way up too your d2x cios installer step on a previous video. I then found anothr video that ditected me here, and everything seems to be working extremely well. But as soon as i clikc the play button, it immediately black screens, my controller turns off and stops respoding and the only way to get to respond is by powering off the console. Any idea what i did wrong, im seriously lost and cant find anything that seems to be helping at all.

    • @BytesNBits
      @BytesNBits  2 месяца назад

      Try going through this video. ruclips.net/video/8RdwHT3C16E/видео.html. It will help you get the cIOS files installed correctly. It's probably something to do with that.

  • @TherealTygaming
    @TherealTygaming 8 месяцев назад

    Can you just use a usb or do u need both

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      You can just use USB. Just copy the apps folder over to your USB drive.

  • @metroid97
    @metroid97 3 месяца назад

    Mine keeps saying usb is not initialized, but it is. Its fat 32 and all files are correct format and named

    • @BytesNBits
      @BytesNBits  3 месяца назад

      Are you plugging the usb drive into the correct port. Sometimes you need to select the driver in the usb loader settings page to get it to register.

    • @metroid97
      @metroid97 3 месяца назад

      @BytesNBits finally got it. I have to separate my gamecube iso and wii wbfs between sd and usb drive. Weird but it's working flawless. Thanks for the helpful video!

  • @Deiter-y5g
    @Deiter-y5g 3 месяца назад

    Im having a problem where i load up the USBLoader and its just the menu where you load the game but with no buttons or nothing

    • @BytesNBits
      @BytesNBits  3 месяца назад

      I'd try reinstall the app and make sure your games files are all installed correctly using the backup manager.

    • @Deiter-y5g
      @Deiter-y5g 3 месяца назад

      @@BytesNBits I just ended up swapping what I was using for everything and it worked fine! Thanks though!

  • @Daily_videosx0
    @Daily_videosx0 6 месяцев назад

    My back up on the top left corner is green and says finished but nothing is happening

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      Can you check to see if the backup is completed? Did it generate the files?

  • @JudSteele
    @JudSteele 9 месяцев назад

    I was able to put Sonic Heroes on USB Loader GX but only through SD Card. Would this be theoretically possible to put on the external SSD if I added a folder for that file type?

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      Yes. Make sure you use the Backup Manager to copy the game files. It needs to set up filenames and folders for you.

  • @mighty_Buttercup
    @mighty_Buttercup 3 месяца назад

    Would you have any advice for my problem. I have the USB Loader GX and when I click on the game on my flash drive it loads the games initial menu and when I click "Start" the screen goes blànk and goes back to the home brew channel menu. I have tried multiple games and it does that with all of them

    • @BytesNBits
      @BytesNBits  3 месяца назад +1

      Try running this setup - ruclips.net/video/8RdwHT3C16E/видео.html. It installs a number of extra cISO files that might help.

    • @mighty_Buttercup
      @mighty_Buttercup 3 месяца назад

      @@BytesNBits Thank you! Your tutorials were so helpful. Can't believe they are free lol That worked. Couldn't have done it without ya! I think I have it all set except my PS1 games don't work. Thank you again!

  • @patatipatata3439
    @patatipatata3439 5 месяцев назад

    Hi, ive downloaded the same files as you, but sadly, idk why, i cant see the d2x custom ios installer like yours... for reference, im using a USB stick FAT32 ... why is it doing that ?

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      I'm not sure why you'd get different or missing files. Check you've gone through all the steps correctly.

  • @LordBaegel
    @LordBaegel Месяц назад

    My files are stuck as .7Z files, and I don't know how to convert them or fix it

    • @BytesNBits
      @BytesNBits  Месяц назад

      If you're on a pc use an app called 7-zip

    • @LordBaegel
      @LordBaegel Месяц назад

      @@BytesNBits Should I just format them to regular zip files, as wbsf isn't an option? I'm sorry for asking you for tech support. Your tutorial has helped immensely with getting my Wii homebrewed and set up :)

  • @frazier6565
    @frazier6565 Месяц назад

    Every time i load up super mario bros it goes to a black screen and crashes any suggestions on what it could be thanks

    • @frazier6565
      @frazier6565 Месяц назад

      Also this happens if i open the mii channel too

    • @frazier6565
      @frazier6565 Месяц назад

      UPDATE !!! If bought a sandisk cruzer 64gb 2.0 and works fine. I was using a ultra 3.0 and it crashed

    • @BytesNBits
      @BytesNBits  Месяц назад

      Great to hear you got it working. Not all sd cards and usb sticks are compatible but I don;t think you can find out until you try them.

  • @midox_1525
    @midox_1525 8 месяцев назад

    I figured out how to do everything but the website you gave only downloads 2MB per second. On steam and other things i get around 50MB per second, is there a fix to this?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Unfortunately not. The download speed is limited at the server end. Bandwidth costs the site owner money so I guess they need to limit how much people can download otherwise they'd have to start charging.

  • @compstore523
    @compstore523 7 месяцев назад

    Hi i have a problem because if i launch wii party it shows black screen and after a few secends it crashes to the homebrew channel

    • @BytesNBits
      @BytesNBits  7 месяцев назад

      I had the same problem with another game. There was a setting in the USBLoader setup for the 480p fix I think. I either had to turn it on of off to get the game running, but it them let all games work - at least the ones I tried. Hope this helps.

    • @compstore523
      @compstore523 7 месяцев назад

      @@BytesNBits Okay i will try it

    • @mighty_Buttercup
      @mighty_Buttercup 3 месяца назад

      Did you find a solution? I'm having the same issue. Thank you

  • @DanielSquidington
    @DanielSquidington 10 месяцев назад

    Does USBLoader GX support navigating the menu with a gamecube controller?

    • @BytesNBits
      @BytesNBits  10 месяцев назад

      It works with my classic controller to select and start games. You'll need the Wiimote to get to the menu and settings buttons.

  • @cristian-fe3hx
    @cristian-fe3hx 6 месяцев назад

    so when i try to load a game from the loader my screen just goes black and essentially freezes. i have all the cIOS installed. the problem might be that im using a usb stick and not external but im not trying to download any big games. i did games under a GB so that i could test it on my stick before i actually buy something bigger. any suggestions?

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      It's usually either the cIOS or some settings in the USBLoader app. I did have a similar issue that ended up being the 480p fix setting. Can't rember if it had to be on or off. but have a look in there.

  • @edwardmorales5379
    @edwardmorales5379 8 месяцев назад

    For some reason I am not able to see any of the Gamecube iso games or WII wbsf games. I did everything correctly. Did correct labeling and folders but games not showing up. Everything is left at default settings so nothing is changed. Any help?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Make sure USB Loader can see your drive. Go to the settings page and make sure you've got the right storage selected.

  • @harbo2590
    @harbo2590 4 месяца назад

    My Wii was working for a good few days, but today while trying to play the screen keeps getting stuck on the usbloader loading screen. Any tips maybe?

    • @harbo2590
      @harbo2590 4 месяца назад

      Okay I figured out that my Wii isn’t connecting to the internet for sum reason. Can I just reconnect on another connection and retype in the dns or restart the entire thing?

    • @BytesNBits
      @BytesNBits  4 месяца назад

      Just set up your wifi connection again using the normal settings. You only need the exploit dns servers for the actual hack.

    • @harbo2590
      @harbo2590 4 месяца назад

      @@BytesNBits figured out the actual problem. My usb corrupted somehow but thank you for the info regardless

  • @enderrrose228
    @enderrrose228 8 месяцев назад

    im having trouble gettin the wii backup manager to recognize my wbfs files... in my file manager i can see theyre there, but when i go to the same location tyring to add them they dont appear... any fixes?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Do the file names have the correct extension? Make sure you unzip any archives if the files have been compressed. Download the Dolphin emulator and try the files in that to make sure they are working rom dumps. Hope this helps.

  • @Jrykwht
    @Jrykwht 3 месяца назад

    Wait I do need an usb or can I just use my sd card?

    • @BytesNBits
      @BytesNBits  3 месяца назад

      You can just use the SD card if you want.

  • @JulyScofield-do9si
    @JulyScofield-do9si 6 месяцев назад

    mine says no WBFS or fat/NTFS/EXT Partition found should I press select or format It or press the channel?

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      Did you use the backup manager to set up your games on the USB drive? It looks like the system can't find the wbfs folder.

    • @taialt97
      @taialt97 6 месяцев назад

      @@BytesNBits same problem here, I used the backup manager. I also use a USB flash drive of 125GB that is NTFS (don't know if that's a problem)

    • @JulyScofield-do9si
      @JulyScofield-do9si 4 месяца назад

      @@BytesNBits the promble was that I was using a 16 gb usb drive and a 32 gb sd card.

  • @chadrex3813
    @chadrex3813 9 месяцев назад

    I tried this and I can launch USB Loader GX, but I can't exit it. When I try to go from it to the Wii system menu all I get is a black screen and I have to power the Wii off to get back to the Wii menu.

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      That seems strange. Can you get back to the Homebrew screen rather than the Wii Menu? I'd probably try adding a game to see if that helps. If still no joy try deleting it all off your sd card and reinstalling. But just guessing here!

    • @chadrex3813
      @chadrex3813 9 месяцев назад

      First, I ended up testing with a game and that didn't help the issue and I also couldn't get to the homebrew menu either. I accidentally figured out the issue though! I had the USB drive I wanted to use to test games with plugged in and it had an empty wbfs folder. I happened to unplug it one of the times I rebooted and no issues accessing the Wii menu. Kept it unplugged and put a game on the SD card. No issues, game worked! Switched the USB external hard drive I planned on using after my tests and no issues either! Not sure why it didn't like the USB drive (with and without games on it) but all is working now!! Thanks for the great video! @BytesNBits

  • @essentialx8850
    @essentialx8850 9 месяцев назад

    is there a way to update the cIOS for wiiu? for the vwii. I cant seem to load from a hhd but I can with a USB stick.

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      Have a look at gbatemp.net/threads/simple-guide-to-install-cios-on-vwii-backup-nand-and-keys.339890/
      If you've got it working from USB stick it might also be a compatibility issue with your HDD. Make sure it's formatted as FAT32 and make sure it's got enough power to run (SSD and laptop drives will run from the USB port - standard mechanical drives may need an extra power input). Hope you get it going!

  • @katmuhong3435
    @katmuhong3435 3 месяца назад

    Dear Sir ,
    Could you please help, I have issue at 13:40. I press A but nothing change. I'm using a SD card

    • @BytesNBits
      @BytesNBits  3 месяца назад

      Make sure you've got the game files saved in the correct folder structure using the Wii Backup Manager. USBLoader expects them to be in the wbfs folder.

  • @BIGACE-11
    @BIGACE-11 8 месяцев назад

    And also when i go into Homebrew after setting up my sd card and usb. Nothing is there!?!?!?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      It sounds like backup manager isn't recognising your game files. Make sure you extract them out of any archive file so you have the actual wbfs files. If that's all ok try installing the dolphin emulator and trying a couple of rom files to see if they work. Hope this helps.

  • @michaelstrautmann8953
    @michaelstrautmann8953 9 месяцев назад

    Hello! I would love some help if possible. I followed your last video about modding a Wii. Then I followed this one to add games. After I did everything in the video, my Wii goes to a black screen when I turn it on, and I cannot connect my remote anymore. I have the black wii, so I cannot go to recovery mode. Do you know what I should do?

    • @BytesNBits
      @BytesNBits  9 месяцев назад +2

      I'd first take out the SD card and USB drive and see if that lets it boot. Next check your video / hdmi connections. Did you install PriiLoader. Put the SD card back in and power off the Wii. Hold the reset button while you power on and see if it boots into Priiloader.
      If all this fails a common problem to give you the black screen is a failed Bluetooth module. This needs you to open up the Wii and replace a module. There are videos online to show you how to do this.
      I hope this helps.

    • @michaelstrautmann8953
      @michaelstrautmann8953 9 месяцев назад

      Thank you for your help!
      I tried booting it without the SD card or USB drive, but no change.
      The connections and cords are all good.
      I modded my Wii exactly like you said in this video and the previous one about modding said to. So yes I installed Priiloader. I am able to get into Priiloader by powering it up the way you described, but my remote will not connect to allow me to make changes in HomeBrew.
      Does that sound like the Bluetooth chip or a different problem?

    • @BytesNBits
      @BytesNBits  9 месяцев назад +1

      @@michaelstrautmann8953 It does sound like the controller can't talk to the Wii. First try another controller if you can. Are you using an official Nintendo remote or a third party one? Some of the third party ones can be hit and miss. having said that the Wii should at least boot up even if there are no remotes available. If you still can't get it to boot I think the Bluetooth module would be the first thing to look at.

    • @michaelstrautmann8953
      @michaelstrautmann8953 9 месяцев назад

      @@BytesNBits That makes sense! I will try it. Thank you so much for your help!

  • @Treepuppy
    @Treepuppy 5 месяцев назад

    Whenever i click a game it takes me back to the wii menu

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      Usually it's one of the cIOS files not correctly installed. Or it could be an incompatible game. Does it do it for all your games?

  • @rizeicyy5609
    @rizeicyy5609 3 месяца назад

    how do i actually get the games onto the usb>?

    • @BytesNBits
      @BytesNBits  3 месяца назад

      You need to use the Wii Backup Manager app to copy the games over. You can do it without but it's much much harder.

  • @brycewithamm
    @brycewithamm 2 месяца назад

    Having an issue with the dx2 cios with it saying timeout and i checked your first modding wii video out and someone else had the same issue so you put the link to the other method that didnt require d2x cios installer and used yawm instead but now this video requires d2x and i tried again with no luck any other way to getting around it?

    • @BytesNBits
      @BytesNBits  2 месяца назад

      If you've gone through the ModMiii video you should have everything you need for USBLoader. It should have installed all the cIOS files.

    • @brycewithamm
      @brycewithamm 2 месяца назад

      @BytesNBits thank you. You're a legend. Everything worked perfectly gonna be following your nintedont guide soon!

    • @BytesNBits
      @BytesNBits  2 месяца назад

      @@brycewithamm Great! Have fun!

  • @Yoitshuskyvods
    @Yoitshuskyvods 8 месяцев назад

    When I try to play a game it just forces me back to the homebrew menu how do I stop this

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      Check you've got the files and folder names correct. Did you use the Wii Backup manager to copy the files to USB? If that's all OK try running the game files in Dolphin to make sure they are OK. Make sure you've got the cIOS drivers installed. If all else fails try re installing the USB loader. I hope this helps.

    • @Yoitshuskyvods
      @Yoitshuskyvods 8 месяцев назад

      @@BytesNBits I figured it out yesterday but thank you for the guide

  • @code_brodie-td8fg
    @code_brodie-td8fg 5 месяцев назад

    I cant get in the app from the win64 where do i have to click?

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      You'll need to unzip the Backup Manager files and there should be an executable in there.

  • @dcfortythree987
    @dcfortythree987 5 месяцев назад

    Is this possible on a Chromebook?

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      The backup manager software won't work but you can set up the hack OK.

  • @rawr7850
    @rawr7850 8 месяцев назад

    Help I've putted my wii on tye internet and it does not work anymore

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      I'm not sure what you've done. Did you install Priiloader? if so power on whilst holding in the reset button. This should get you into Priiloader so you can start to recover the system.

  • @triggerkids420
    @triggerkids420 9 месяцев назад

    When I load usb loaded it takes me back to the Home Screen

    • @BytesNBits
      @BytesNBits  9 месяцев назад +1

      Make sure you've gone through the initial hack setup video. You might be missing some of the apps and IOS setup.

  • @midox_1525
    @midox_1525 8 месяцев назад

    Whenever I download a game I says the file type is TZ, how do I fix this?

    • @BytesNBits
      @BytesNBits  8 месяцев назад

      TZ files are just compressed files. Use WinRAR to open it and extract the Wii files.

    • @bryanalvarezii4154
      @bryanalvarezii4154 7 месяцев назад

      I’m stuck somewhere similar aswell, when I download a game from vimm and try to put it into backup manager it doesn’t submit as a wbfs format i think mine as well ends in a Tz format how do I format to wbfs?

  • @twitchvapidkill6662
    @twitchvapidkill6662 6 месяцев назад

    so my Wii games don't work but the gc does can u plz help

    • @BytesNBits
      @BytesNBits  6 месяцев назад

      It's usually the other way round. Is it all Wii games? Do they show up in the list of games?

    • @twitchvapidkill6662
      @twitchvapidkill6662 6 месяцев назад

      @@BytesNBits the only game I got to work was Zelda skyward sword and then I loaded on this morning and the two games I added, stopped working as well. They don’t work longer than one day and I and I never get to actually. Play them

  • @avishaidavis6038
    @avishaidavis6038 5 месяцев назад

    When i select the title source "wii games" it says "USB device not initialized". Any idea why anyone?

    • @BytesNBits
      @BytesNBits  5 месяцев назад

      Make sure your USB drive is plugged into the correct USB port - please see the video.

    • @avishaidavis6038
      @avishaidavis6038 5 месяцев назад

      @@BytesNBits It is. Its also FAT32 I already watched 6 hours of footage ofbhowbto fix it and nothing worked :(

  • @monkilla_tagVr
    @monkilla_tagVr 9 месяцев назад

    i cant install games in .wbfs its says that it downloads in .7z

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      .7z is an archive file. the .wbfs file is inside it. You'll need to install 7 zip or Ashampoo zip free to open it.

  • @ally9464
    @ally9464 9 месяцев назад

    when i try to start game it goes back to main screen

    • @BytesNBits
      @BytesNBits  9 месяцев назад

      Make sure you've got the game loaded correctly through the Wii Backup Manager. If that's all ok try downloading a different copy of the game file.

  • @tommasobenedetti6274
    @tommasobenedetti6274 5 дней назад

    I can't find on the internet a wbfm Mario galaxy that works 😭