@@GacMan47 I used to say that too, until I tried it myself. It's not as difficult as it seems. If you don't try it yourself, you'll never know. You can do it.💪
@@far_jklike what? crappy motion controls and low quality haptic feedback? wow so amazing definitely worth hours of soldering and worth bricking a 350$ device. like ok if you like messing around with the switch good for you but there isnt really a logical reason to buy it over a more powerful handheld besides being a nice collectors item
With a 50+ hours incredibly difficult process that has a 99% chance to destroy your console if you aren't one of the 1000 people able to do something like that, there's no way Nintendo considers that a threat
tu est tout simplement incroyable moi qui ne voulais initialement pas de switch tu m'ouvre le champs des possibilité de maniere tellement grande que maintenant je veut une switch
My 4gb modules are on the way. Can't wait to install them and see the performance :). Thanks for the vid. Maybe I would've liked it to be a bit slower though and not speed up.
@RevolutionFalls Wait, how would OP be wrong though? It makes sense on what they say it does indeed have very very clear microscopic video. Micro is small, it doesn't mean at an Atomic level
I have no knowledge about these, I have no idea how you have done it, but maaaaan! I watched the whole video and I swear I could have gone at least twice! Beautiful job done! :D
Nice! Definitely not practical and more of a "I'm doing this because I can" kind of upgrade, but impressive stuff nonetheless! Definitely got me interested in learning more about overclocking the switch, learning about timings, Binnings, and each function in the Switchroot Linux DVFS Config to maximize the Switch's pitiful memory speeds with the stock ram chips. Great content, definitely subscribing to learn more from you in the future :)
Good work, with the cpu flex, you can chop the end of it and solder your cpu point to the bottom of the top resistor on the underside of the flex then just run the wire through the shield clip points
WOW!!! justo es lo que busco que alguien haga este trabajo a mi nintendo pero dónde vivo no hay nadie que pueda o se anime hacer tremenda obra, mis respetos man
conozco a uno en mi ciudad es excelente con soldadura, el problema es que no maneja software tan bien, aquí el hombre además del hardware hizo comandos muy avanzados de linux y no creo que el de mi ciudad pueda hacer eso, estaría bueno si aliexpress ya vendiera una switch así, saludos...
It's really impressive you can tweak both the hardware and softwarea and it's a valuable skill to have. Having a modded switch with ubuntu is overkill 😂
Salut ! Je sais que tu es français mais je voulais te dire que je trouve le travail de la vidéo et de la switch incroyable et je voulais te féliciter ! 🔥
i messed up my switch oled HOS USER partition (i dont know how) but thanks to this video i was able to restore the original size! it was only using 12gb instead of the 60gb partition. thank you, i was pulling my hair out for days but somehow you indirectly helped me :).
Hi, installed Hynix H9HCNNNCPMPMMLXRNEE - 2 modules 4 gb each. Ram Fuse Burn writes - current dram id not supported. Where in the hekate source code should I change it?
I think games can run in a 8GB modded console if Atmosphere is well configured, but the extra RAM won't benefit 99% of games (although I've read a few Switch ports checks the available RAM and uses it to the max). The higher RAM FREQUENCY will benefit all games globally. Another usage for the extra RAM is homebrew (specially useful for running Linux/Android), game modding, debugging...
Hello, I bought a switch that had a dead emmc, I bought one but I think it comes without a system, could I remove the system from another OLED and inject it into the clean emmc? Don't you have a problem with serials or something like that?
Impresionante, pero muy complicado para la mayoría de usuarios, entre los que me incluyo, me quedo con me microsd de 512 GB y mis 4 megas de RAM...pero está muy bien la información. Personalmente no le veo mucha utilidad a Linux en la nintendo switch y android tampoco se lo voy a poner, pero me parece una pasada el trabajo de soldadura y el del software que hay que hacer, me suscribo al canal y seguiré viendo tus videos
Just curious, does more RAM mean that switch games will crash less? I know most devs have set the use limit to a certain amount but I believe if there’s a way to utilise the extra RAM, so many games will crash less (especially survival / open world).
I know i am capable of the soldering, i just wonder how much trouble it would be to patch games to use 8gb. There are a few games i would really love to use higher res textures in
Waiting to see this machine in action. If worthy, I'll do the process to achieve those results. Thanks, man, you're awesome. And... which modules did you use? Both, for ram and nand
I went unlock, but a rip off the rst point, nintendo switch lite. Later blue screen, what am i suposed to do? Or a cut accidentaly a trail near the plate cover i guess
But you won't get any noticeable improvement to match the effort plus cost of those upgraded components on original switch games as they aren't programmed to take advantage of such upgraded hardware.
The switch can support it, but there aren't any 1TB/2TB eMMC 5.1 HS400 modules available. Most manufacturers have moved on to newer interfaces like UFS 3.0 and above
I swear this is just art at this point
Confirmo, se ha convertido en un artista.
better than art
Why
@@genlongtsang1093 did you watch the vid
How I wish I could wield this man's intelligence..
The possibilites, would've been endless.
God knew you would be too powerful if you had such power, brother.
it's not that hard brother, you just have to learn how to solder
I wish I had his soldering skills
@@GacMan47 I used to say that too, until I tried it myself. It's not as difficult as it seems. If you don't try it yourself, you'll never know. You can do it.💪
Unless you are low IQ (no offense if you are because it wouldn't be your fault) you can obtain it.
nintendo is either gonna hire this man or sent the yakuza after him
Lol I'm gonna download this video before Nintendo sees it
That yakuza bit lmao
Dont worry we have Anonymous to back him up all the way!
Would they be from the sheemano family?
@@misodgurung2718 those clowns are useless
SD upgrade ❌
Oled PRO MAX upgrade ✅
Ryujinx .
@@Red-Revolution708garbage
@@Red-Revolution708original hardware has gimmicks that cannot be replicated by the machine
@@far_jk Yeah like low framerate
@@far_jklike what? crappy motion controls and low quality haptic feedback? wow so amazing definitely worth hours of soldering and worth bricking a 350$ device. like ok if you like messing around with the switch good for you but there isnt really a logical reason to buy it over a more powerful handheld besides being a nice collectors item
I'll honestly never do this mod, but this was a treat to watch. Very cool to see it happen.
Downloading this video to prevent nintendo take down
How does that prevent takedown?
@@emptytrashben2375 Archive/re-upload it
@@GAALsbrr and why would Nintendo bother to take this down? his completely changing his console not doing piracy.
@alfredmanner6881 it's nintendo we're talking about
A viewer cannot grasp how much skill that takes. I tried to put a modchip in my oled and I bricked it -_-. That just makes this more impressive lol
Thats why u need 5-50 or 100mm cam to checking solder
I have no idea what 96% of what he's doing but I like it and watched it till the end.
That damn AI voice-over
That way Nintendo ninjas can't get him
He has to be safe from nintendo
And let’s be honest, for AI generated voice over, it’s not bad.
And truly, most of it is due to the writing, which is only cringey seeming because it’s not the RUclipsrs first language.
Bro it's not an AI it's just a Twitch tts
If Nintendo can't give us a PRO... the community will build the PRO. Kudos man ❤️💪
nintendo ninjas are speeding toward this mans house
Oh ya we alrdy seen teaser of Emio
Why?
With a 50+ hours incredibly difficult process that has a 99% chance to destroy your console if you aren't one of the 1000 people able to do something like that, there's no way Nintendo considers that a threat
tu est tout simplement incroyable moi qui ne voulais initialement pas de switch tu m'ouvre le champs des possibilité de maniere tellement grande que maintenant je veut une switch
Esto ya se puede considerar arte, y tú, eres todo un artista.
You need to be GENIUS to do all this! You're practically a Nintendo engineer, crazy!!😮
This is awesome! Thanks for the tutorial, I am versed in hot air soldering myself and may attempt this once I have enough time on my hands ;)
How anyone thinks to do this type of thing, then can actually pull it off is incredible
Both the Switch and OG Xbox have massive RAM upgrades now. Nice
Just wow, dude! I have no words to describe how incredible this upgrade and your competency on the RT
My 4gb modules are on the way. Can't wait to install them and see the performance :). Thanks for the vid. Maybe I would've liked it to be a bit slower though and not speed up.
It was hard to find a good compromise without too much speed up and not being 1 hour long and boring 😄
Switch games will not use more ram unless programed too
@@topherc100 Some games can use it, but most don't without additional patch
In the end... Linux and Android will thank you very much
u cant slow it down on utube setting?
I watch a lot of tech repair channels, yours by far has the best microscope video quality😆
“Microphone” quality. (Edit: I misread microscope as microphone)
@@RevolutionFalls sounds like ai
@@McMasterProGenius exactly
@RevolutionFalls Wait, how would OP be wrong though? It makes sense on what they say it does indeed have very very clear microscopic video. Micro is small, it doesn't mean at an Atomic level
@@PixelatedWolf2077 I misread it as microphone
The skill and proficiency of this work is truly impressive, it certainly inspires one to expand his remit of interest
I have no knowledge about these, I have no idea how you have done it, but maaaaan! I watched the whole video and I swear I could have gone at least twice! Beautiful job done! :D
Damn maaaan, you are so cool 😊
By the way thanks for the O.C utility now i can achive 2000mhz+ on cpu and ram gpu is 1000mhz+ 👌
You earned a new subscriber, your videos and efforts you put in can't be weighed in diamond!
Like others say, this is ART!, dude, you are amazing!
Nice! Definitely not practical and more of a "I'm doing this because I can" kind of upgrade, but impressive stuff nonetheless!
Definitely got me interested in learning more about overclocking the switch, learning about timings, Binnings, and each function in the Switchroot Linux DVFS Config to maximize the Switch's pitiful memory speeds with the stock ram chips.
Great content, definitely subscribing to learn more from you in the future :)
Good work, with the cpu flex, you can chop the end of it and solder your cpu point to the bottom of the top resistor on the underside of the flex then just run the wire through the shield clip points
This is my next project. I want to do this. It looks AMAZING!
Eh bah c'est incroyable, je ne pensais pas qu'on puisse upgrade sa switch comme ça
On peut l'améliorer comme ça mais c'est pas officiel
Sick, nice to see some proper upgrades and modifications for cooling even.
WOW!!! justo es lo que busco que alguien haga este trabajo a mi nintendo pero dónde vivo no hay nadie que pueda o se anime hacer tremenda obra, mis respetos man
conozco a uno en mi ciudad es excelente con soldadura, el problema es que no maneja software tan bien, aquí el hombre además del hardware hizo comandos muy avanzados de linux y no creo que el de mi ciudad pueda hacer eso, estaría bueno si aliexpress ya vendiera una switch así, saludos...
Si hay en aliexpress o en venta quiero uno
can you try something simular on a new 3ds XL or new 2ds XL? not a massive ram upgrade but something around 1gb and not the stock 512mb
That'd be cool. Might help the 3DS not shit the bed whenever there's more than 2 Pokemon on screen
emulator is better
@@stoic_af_memesnot really
@@23.shkola.63-t7iPeople play how they can, but sometimes playing on the hardware is better.
@@AeliusAnonymous It would be cool to see what someone does with the NAND flash memory if a interposer could work.
It's really impressive you can tweak both the hardware and softwarea and it's a valuable skill to have. Having a modded switch with ubuntu is overkill 😂
yes! Thanks for this video ❤
Thanks to your video, I successfully made this mod on 3 different Nintendo Switch consoles.
I'm from uk if I sent my switch in the mail to you how much would you charge for this upgrade service?
Salut ! Je sais que tu es français mais je voulais te dire que je trouve le travail de la vidéo et de la switch incroyable et je voulais te féliciter ! 🔥
Awesome video, please hint what thermal pads you are using, especially thickness of them. Thanks one more time!
wow best video ever!! great skills nice man keep it up
i messed up my switch oled HOS USER partition (i dont know how) but thanks to this video i was able to restore the original size! it was only using 12gb instead of the 60gb partition. thank you, i was pulling my hair out for days but somehow you indirectly helped me :).
M. Naga, je vous tire mon chapeau. C'est complètement zinzolinx.
Thanks for sharing this. It is fun taking a stock console and upgrading what you can.
Your Soldering skills-is phenomenal
Très propre, bien joué 👌🏻
pure art of crafting! we need some benchmarks to see if those 8gb of ram can affect its gaming performance
I never dabble in hardmodding, always sticking to soft-mods cause it's way easier and simpler in comparison, but ngl this was real engaging to watch
This man is insane bro..
Hi, installed Hynix H9HCNNNCPMPMMLXRNEE - 2 modules 4 gb each. Ram Fuse Burn writes - current dram id not supported. Where in the hekate source code should I change it?
Yo man, you should sell this service, atleast the mldding and the nand upgrade, this is insane work
incredible work, looking forward for upcoming videos!
The switch "BRO" 😎
Do you know if any games work with 8gb ram yet?
I think games can run in a 8GB modded console if Atmosphere is well configured, but the extra RAM won't benefit 99% of games (although I've read a few Switch ports checks the available RAM and uses it to the max). The higher RAM FREQUENCY will benefit all games globally.
Another usage for the extra RAM is homebrew (specially useful for running Linux/Android), game modding, debugging...
just for curiosity, is the voice a recording or text-to-speech? it sounds really clean... great tutorial, btw!
text to speech my english is not great 😅
@@nag3030 oooh, it's okay, I get it 😃
It seems that the guy s french(based on his Windows language), so his accent would make his speech...not so clean.
Hello, I bought a switch that had a dead emmc, I bought one but I think it comes without a system, could I remove the system from another OLED and inject it into the clean emmc? Don't you have a problem with serials or something like that?
You can restore with a donor nand backup, follow sthetix's guide
Impresionante, pero muy complicado para la mayoría de usuarios, entre los que me incluyo, me quedo con me microsd de 512 GB y mis 4 megas de RAM...pero está muy bien la información.
Personalmente no le veo mucha utilidad a Linux en la nintendo switch y android tampoco se lo voy a poner, pero me parece una pasada el trabajo de soldadura y el del software que hay que hacer, me suscribo al canal y seguiré viendo tus videos
Wow u are a genius 🤖
Just changing the back cover of the OLED is enough for me :)
wow this is crazy man, amazing work 🤯
Hello je suis intéressé pour de l’upgrade de ram uniquement, c’est faisable ?
I understood about 5% of the words said in this video. Fascinating still.
I don’t own a Switch and I´m not planning to mod anything, but I still watched the full video
protect this person at all costs
crazy insane mods this is so fire bro
Why didn't you make it a 12RAM with 2 Terabytes
Ce mec fait partie de nintendo , juste que il a pas eu sa prime de Noël.
Just curious, does more RAM mean that switch games will crash less? I know most devs have set the use limit to a certain amount but I believe if there’s a way to utilise the extra RAM, so many games will crash less (especially survival / open world).
Many classmates, colleagues and friends bought this small game console❤
Do you sell your upgrade services?
Mind blowing you are very talented good job
this would greatly improve android performance on switch
he nailed the sorthing in one try dam
Is that Gamer Nexus solder mat?
RESPECT ma FRIEND RESPECT.. you have TALENT
I know i am capable of the soldering, i just wonder how much trouble it would be to patch games to use 8gb. There are a few games i would really love to use higher res textures in
Hey, great video but why does it sometimes sound like it just cuts out the audio? Is it a text to speech thing or did you have to remove some audio?
how much do you charge doing this??
Sacré travail de soudure.
Je peine à changer un usb C (je débute...)
Hey I need that windows 11 wallpaper you’re using 😮
Knowledge is indeed power.
Waiting to see this machine in action. If worthy, I'll do the process to achieve those results. Thanks, man, you're awesome.
And... which modules did you use? Both, for ram and nand
Can you mod the switch to use overclocking and frame rate unlockers and all these upgrades from the video without being banned by nintendo ?
Yes, some play with OC / 60FPS patches in online games. As long as they are not pirated, it should be fine
How loud is the fan when playing games at 60 fps like zelda botw/totk or sonic frontiers
Hola en ambos sistemas reconoce los 512GB de la emmc nueva incorporada
this is able to be done on a switch lite im assuming? this is amazing.
Dude nice! I'd imagine this is hard but on a scale of one to ten how hard was this? (Keep up the great work!)
Might have to try this
I went unlock, but a rip off the rst point, nintendo switch lite. Later blue screen, what am i suposed to do? Or a cut accidentaly a trail near the plate cover i guess
But you won't get any noticeable improvement to match the effort plus cost of those upgraded components on original switch games as they aren't programmed to take advantage of such upgraded hardware.
Are you French or just the Switch? Salut! Merci pour le vidéo !
Can we see any games running on the system
Bravo mr le français ❤🎉
Francais qui a du talent ici !
what size thermal pads did you use for the ram & heat sink?
Can we see 3rd party performance comparisons between upgraded switch vs Xbone?
🏆 Are there 1TB or 2TB modules, do the Switch board and systems support them?
The switch can support it, but there aren't any 1TB/2TB eMMC 5.1 HS400 modules available. Most manufacturers have moved on to newer interfaces like UFS 3.0 and above
@@nag3030 Thank you very much for clarifying, your channel is very good for the whole world, a hug from your follower in Brazil 🇧🇷
Vraiment cool la vidéo , est-ce que tu mod pour le plaisir ou tu prend des clients ?
@@pierrebeauregard9022 les deux
This guy must've worked at nintendo 😮
What is the camera/microscope that you used for this job?
U should have just solder to the resistors next the mosfet for Soc point for the rp240
My first switch ever (oled) arrived today I wanna do this sooo bad, but when he pulled up linux I got lost. Also, where did you get the ram modules?
u can setup Linux by using dual boot or virtualbox