Buying a $400 WRECKED Warrior 350...Will It Run??!!
HTML-код
- Опубликовано: 14 янв 2020
- I end up picking up an old Yamaha warrior 350 that was left outside and abandoned for a long time. It was filled with mud and was absolutely filthy when I first got it. I take it home and try to get it running and clean it up. Will it run?! #2vintage, #Wrecked, #Warrior350,
Link to Red Ripper: www.industrysupplyinc.com/red...
Link to Audew Battery Jumper: amzn.to/2NrlqWa
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►WEBSITE: laptwo.com/
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
How did you guys like the video? If you guys want to see more about the warrior I will be posting updates to my Instagram throughout the day: 2_vintage_ instagram.com/2_vintage_/
2vintage Ilm form Denmark
What’s up with the ratchet??
Love the video 👍 great machine glad you picked this one up 🤟🤙
Love the videos 2vintage keep them coming ive actually learned a few things after watching them thank you guys from down under
Hey joe I've had a few of those quads back when I was a kid, yamaha failed on something when it comes to start em, you can pull the side cover off and heat the magnotta and it will start very easy, but 1st you need a starter it's really not turning the engine over hard enough, and those older warriors like that 1 have to play with the choke and barely give it throttle
Warriors are outstanding machines. We had one that we bought new in 1989 and it ran flawless until it was hit by a sandrail in 1997. We JB welded the case replaced the swingarm and off it went again for another 4years until we sold it. Great find Joe I love these bikes.
Step one pressure wash step two drain all gas out of the machine step three try for spark step four clean carb step five try to get it to run the rest is water under the bridge
Cleaning the carb would always be the first thing i would do
johnsn10 should always
Yup always first
Carb cleaning can wait until bike or quad is clean cuz if any of that dirt gets in the carb you scrood
He bypassed the carb by going directly to the spark plug opening. I have never done this nor seen anyone else do this. I always pour fuel through the intake valves to bypass the carb. These days with ethanol the carbs and gas tank are always a mess plus when you add time and years of neglect. Battery connection also always come loose so that is always high on the list.
The one way starter clutch bearing is shot...
I hope he reads this. It's so obvious theres a starter issue.. it sounds horrible cranking
@@mxbeanz1206 ive been working on atvs for 20yrs. I can tell just by how its cranking that the starter clutch bearing is slipping. Why it doesnt fully crank over fast enough
@@cimotorsports-atv mine was wayyyyy worse it would slip for like 4 seconds then grab once then slip again then she gave out eventually it would just slip
I'm 10 mins in no wd-40 in sight
Yaeh!😂
Just broke a ramp that’s worth more than the quad... i was sooo waiting for a f..................k😂
This is the comment I was looking for 😂 he didn't even say anything not even a reaction 😂
He likes his worriers lol
Warriors
@@purplehayze420 Not only was your grammar correction unrequested annoying, it's also about a year late.
@@temporalnacho2606 and did I ask for your feedback see every these days get Nothing but butt hurt over little stuff pathetic
@@purplehayze420 that made no sense. Lmao
Wow I'm excited for this project 1996 warrior 350 that's one of my favorite color plastics for that machine 👍
nice tires on this one too 🤟🤙
Def the most reliable engine ever assembled.
You didn’t check for fuel and didn’t clean carb
uh didn’t he say there was no gas in it and then tries to fire it 5 minutes later?
I have a 2001 Yamaha warrior and they are a beast ‼️‼️‼️
Yes they are 🤙
Same
Loved the videos don’t let people tell you otherwise! Great job always want to be like you!!! 👍🏻
I ♥️ the measuring cup and straw used for adding half a drop of gas into the cylinder!!👍😂😂 spray wd40 everywhere it should start after that!!🤕
I love warriors. And i WATCH ALL YOUR VIDEOS. I just rebuilt my 35o warrior all thanks to you. So thankyouuuuuuu
Power wash in the side yard would save you a lot of time. The Velcro was probably from 1 piece, over the tank, saddle bag. Velcro would keep bags from flopping around and still allow you to remove bags easily if needed. Your next project should be a small work bench 3'x2' and waist height. Possibly even on wheels to move it around. This way you aren't working on the ground. You'll really appreciate it when you are working on carbs and small items. Hope you get it running.
Good luck, hopefully it something simple or soon enough you’ll be adjusting valves, doing dumb things like oil pump, stator, intake boot, had a mint 99 that ran amazing but had some weird quirks that 3 experienced owners could never seem to be figured out even after rebuilds. Wiring is funky on them sometimes too check your neutral and parking brake wiring. If you have any questions on where to start if it’s just giving you weird results I may be able to shed some input!
Ps that’s my favorite warrior color scheme ever, my 99 was all red with gold rims, decent.
I've owned 2 warriors an 89 and 95 loved them,had them for a couple years but sold them(kind of wish I kept one)and upgraded to a 2019 Raptor 700r
I put a cone filter on ours Joe, made a huge difference. Kept original airbox but leaving the cone on. Easy yo clean.
Here's a tip for the cleaning up oxidized plastic wash them down and let dry spray them with nonstick cooking spray let it sit for about 20 min and then wet sand wipe them down done i came up with the trick and it looks factory and cleaning up after a ride is easy and the finish last for years
stabbing that thumb throttle while you were trying to start it was really triggering my OCD. All I could think was "please please stop doing that for the love of god." I never had to touch the throttle on my warrior, pull the choke, hit the button, let her rip.
Love the videos bro
You are a very optimistic person lol. $400 a great deal but all I see is trash. Cant wait to see the transformation though honestly. I bought a perfect running 07 KX250F for $629 lol. Such a odd price I know but my haggle game is insane. I plan to do future rebuilds as long as this one goes as planned
Love your videos! Have you thought of doing a honda atc 185s-200s-200x- or 200es build? I would love to see you build one! They're super easy, to work on and dead reliable. Plus they're really cheap
Swapped out gold wheels for a set of douglas low pro's. Put some hole shot racer tires on all 4 looks pretty sick, just rides a bit low, warrior thing. Great vid@
Great work keep up the good vids
that ramp has been bent up since the quadzilla. heat gun will fix it, and the carb failing that get the wd40 on it
Well I like it better than the last one. Good luck
But you didn't let it warm up...Bro!
I love watching your channel and how conservative you and explain as you go thru each project but on this one first step directly to the car wash would have saved hours . love your channel .
Did he clean the carb? This dude really cleaned it the exterior before the interior first thing to do check spark,gas and clean the carb it cant run if the jets are clogged
I will get mine on friday and im so hyped up from your Videos. I will drive 7h (one way) to get it 😂
Honest. It ran perfectly when I parked it
@@fdrc8099 oh yeah I've had people use the selling for a friend before
I love 350 worriers there cool quads good video
Yea I like that one old school nice vid bro
I’m just here for the comments 🍿
My moto 4 would crank forever, just make sure the jets are clear
You actually think grease fixes loose bushings on your a arms? Wrong
Yes another one as soon as i buy one
Looking like it should clean up well!
FYI instead of the shaft shifter you can use a yz250 2 stroke direct shifter
It would save you a lot of time if you cleaned the carb first. Then you know it’s getting fuel. Or see if it hits off starting fluid or carb cleaner. Function is more important than looks. Still in a lot better of shape than the first warrior project
By the way, messing with the throttle sometimes makes it not start because when i had my four wheeler when i applied throttle it wouldn't start
I like the spidertracs on the tears cool tires you don’t see them much anymore
Spray some carb cleaner or easy start down the air boot if it goes to start you know the jets in the carb are probably blocked. And fuel isnt reaching the combustion chamber. If it dont, do a compression test. Hope ya get it working!
to bump start a high compressed bike you put it in 4th and push it will turn over
I did, still hard to push
2vintage I have a Honda 300ex the starter was gone and didn’t have the money to buy a starter so I had to bump it for 1 yr and my bike never started in first it would never turn over it had to be 3rd or above that’s all I know about bump starting
You need a good hill to go down
Here's a tip to find the year. I'm not 100% sure but if quad VINs are like car VINs the 10th digit will indicate the year.
Disconnect carb, squirt a bit of gas directly into the spark plug hole and get it to burp off.
This will give you a lot of information.
Good job
Oh yeah the battery pack works amazing 😅😅😅
U otta pressure wash the whole thing and try to get all of the gunk off... I think it would turn out pretty nice
Did you fix all those vehicles your self if u did then dang I'm your biggest fan
Reverse lever always get stuck on those and th3 crankcase is usually Beat!
Why does it sound like the battery wants to die every time when you start it..?? It happened on your other warrior too mine doesn’t do that???
I have a complete seat for th hat as well, n eeds a new cover but complete.
Lol on the way home he said lights worked got home let’s see if the lights work yeah lights work that’s good lol
You did put gas in it right?
Banshee running on one cylinder "OH BABYYYYYYYY THIS IS FAST" wont touch the cr lmfao. Little nicky you are a funky dude. That tri zinger is more your style.
Starter is not turning motor over fast enough it’s to weak.
Before I watch this yes ,it will.
Yay love warriors do a speed test.
It should do close to 60
@@whatintownation6347 they do a little over 60 like 63
Do a 400ex I got one for 690 06 runs drives road it all day you can find some good deals
Already knew it was ganna another Yamaha Warrior 350
Why would you use a flat head screwdriver to clean off all the oil on your frame
The decompression valve is only on 87
No dought a bad starter clutch. Y olly could try once removed to clean it and hope its "build up" causing fault. Ive seen it broke a couple ways
The one way bearing on the starter clutch is going Joe you definitely need a new one but reading the comments you obviously know that now... and if you get another machine dude check out a Honda 300EX they are probably the ultimate Trail machine or an lt230
You could roll it off thats what I do with my four wheeler when I don't have a battery
Sounds like the Woodruff Keys broken the one way bearing/ flywheel is spinning on the crank
You flooded the cylinder with gas then expect it to start 😂😂
You'll get er running again.
U need a battery jumper u need a lot of power to get it to crank over fast enough for it to start it up
Hey you forgot the nice rims it's sypposed to come with like you said in the begining
I had same exact color one mine was an 02
The last time I met someone from Craigslist at night I bought a "blue" Stratocaster that turned to a purple in the daylight.
The reverse lever wasn’t fully engaged in forward
I new it was a 96 but the looks I had the same machine there not bad quads
I like them videos
It’s nice quad
Normally u have to have the clutch pulled in on worries to even get them to turn over that's kinda wired??
Im just going to buy a rm 80 1983 for 400€. 40h piston and crankshaft (They have been used for that time)
you should do an old beat-up ltr-250 resto
I miss my warrior. I've been looking for another one
Sooo many people fail to realize rhese engines were ment to HAVE regular maintnaince including valve adjustment.
Still double check the starter/ starter clutch
Check compression, soounds limpy. Might have stuck valve.
I LIKE IT
joe I hope you have to use to drill to start it like the last one that was funny as crap when it started keep the videos coming
Lol.never again
What’s the glossy stuff u put in the plastic?
I'm interested in lt500r quadracer had on your video
Not to be a little bitch but quadzilla is the name homie. The quadracer is the 250 2 stroke and the quad runner is the 4 stroke.
🔥🔥🔥🔥
Where should I go to buy randown and non running bikes and quads for projects
No petrol in the tank you said so is that why it ain’t starting ?
Those love the choke. FYI.
Sounds like the engine isnt turning over fast enough for compression to get high
He never checked the carb this dude really gonna say I think its the valves he put gas in the cylinder but the engine could of been flooded with old gas
That's the same year as my ski doo
Just asking what do you guys & girls think about a Honda 2000 XR 80 R 4 Stroke Just would like to know your opinion? Thanks
I got one do 400 in way better condition it just smokes a lot what can I do?