Это видео недоступно.
Сожалеем об этом.
00-06 CHEVY TOP INSTALL (PART 1 OF 2)
HTML-код
- Опубликовано: 1 июн 2011
- This video explains how to install a top seat cover on a 2000-2006 Chevy/GMC Tahoe, Yukon, Suburban, Yukon XL, and Pick-up truck. If you have any questions about this cover or any other seat cover please visit our website at www.seatshop.com or give us a call at 214-710-2565.
Thank you! Thank you! Thank you! My husband watched your videos to install the bottom and top seat covers in his truck. Saved us soooo much money! He could not have done it without you! He has and continues to recommend you to everyone!
Glad we were able to help y'all out
I watched the video and then purchased the cover (2005 Silverado 3500 HD). It went really well and I would not have done it without your excellent video. Great video and the seat cover is a very, very good quality. I did the drivers seat, the passenger seat is next.
We appreciate the kind words and happy to hear our install videos helped. Whenever you're ready to move onto the passenger side, feel free to reach out! Thanks again and if you would like to share any before & after pictures, you can always send it to our email - sales@theseatshop.com.
This video is why I bought these covers, thanks guys.
Thanks for the comment and glad we are glad we were able to help you out with your seats and install!
This video helped immensely! Needed to get the top separated from the bottom and no one had a definite video on how to do it! Thanks!!! :)
Happy to help!
Sweet, I couldn’t have done it without the vid.the plastic groove slides over the steel seat pan edge, took me a couple of tries to get that part😂
You guys are the BEST. Thanks men!! 🇨🇦
Hey just wanted to say thanks for another great video. I use this one today when I was putting in the upper element for the seat heater. Now the driver's seat is like brand new and it's heated now
glad we were able to help you out with this
Needed some perspective and you definitely gave that. Much appreciated
Great video, very helpful. Both the bottom and back foams on both my front seats are seriously shot and need replacement. 2004 Sierra 1500 OEM seats are 12 way power with heat and pewter leather. I found and recently purchased a set of 2004 Silverado pewter cloth seats that are in virtually new condition. The bottoms should just transfer over as bolt ins except I have to peel the fabric off to move the heating element, but what about the back foam? How does that come off the frame? Any tips? Thanks.
Thanks for all the helpful videos. Where is the video for the 95 tahoe top cover?
i would like to see how to recover the front seats top and bottom on a 2011 chevy silverado crew cab
How do you take off the armrest?
Can the top cover be swapped without removing the seat completlely? I did the bottom already.
Thanks.
Do you make seat covers for a 2000 tahoe that does not have armrests?
Is the process for a 96-99 similar to this ?
Mine has the cloth seat and I looked on y'alls website and y'all only have leather vinyl option. will the cushion still work with my seat?
How do you replace and buy the top foam not just
very good video
What do you call the long tool I've seen used??
Do you sell the back cushion
I'd like to see a top cover instal video and(If possible) a back seat cover install video(top, bottom, headrest, armrest) for a 1995-99 Tahoe and Suburban.
Why isn't there one?
where can i get the back foam from i cannot find
Can you remove the seat belt retractor on these model years of seats?
You can, but getting that bolt out is hard (breaker bar). You will need to 100% clean the threads from that blue loctite or you will bend the bracket trying to get it to go back in. It's a lot of work.
Thanks great help. Do you sell the arm rest clip and rubber band? I bet you know where mind are. LOL
no worries, you can try this little trick and it will be as good as new - ruclips.net/video/bzqY3Ek03Lc/видео.html
Any video on how to replace seatbelt ?
While we're not going to have a video on replacing the seatbelt, you can always give us a call at 214-710-2565 and ask for our R&D team, they should be able to help.
Can I put the 03 covers on an 01 frame if I change the foam and can I get both from you giys
So while technically yes, that would work, the cover measurements are not the same length and there's a small part of a metal bar that would stick out by the control panel. If you would like, we could always double-check that for you! You can take a picture of your seat covers, as well as provide a VIN # and email that information to sales@theseatshop.com. We can assist you further from there!
Can you replace the foam?
Thanks for the comment, usually the top foam does not need to be replaced since most of the stress goes to the driver bottom foam. If there is a section that is missing what you can do instead is add a block of foam to that section with some spray adhesive to fill that section up again. Here is a link to what we offer for this Year Make and Model - www.theseatshop.com/2004-chevrolet-suburban-ls-or-lt/#?valueIds=8261,8276&groupIds=3,7042&seatRowId=6&seatPositionId=9
What would I order if my seats do not have an armrest? I have a 2003 Sierra 1500. It does have the full center console.
Hey Harry, feel free to DM us your VIN # and a picture of your seats to sales@theseatshop.com. We would be happy to help you out.
@@TheSeatShop I'll send you pics. My VIN # won't help. It started out as a 2003 work truck. The previous owner installed a full center console from a 2000 Sierra 1500 but I am installing a 2005 Tahoe center console. I believe it originally had the fold down center console but was removed.
Hey guys, my driver seat (03 Tahoe) leans back towards the right. Like the support is gone. Do I need new foam structure? Wondering if I should just buy a new seat
Hi Christopher, thanks for reaching out, honestly we would have to see your seats to know exactly why it's leaning that way. You can contact us at 214-710-2565 so that we can better help you out please have a picture of your VIN# and a picture of your seats ready so that we can better help you out
Do you make covers for 2006 H2 Hummer
Unfortunately, not at this point in time but we may look into it in the future.
Do you the top foam part pl for a 2003 chevy avalanche
We do not currently manufacture that part. Sorry about that!
do you know who may sale it pl @@TheSeatShop
mine was not shipped inside out
Hi Richard thanks for the comment, just curious what did you order and what was not shipped?
I have a 1999 LT Chevrolet suburban
And
I have a 02 gmc dually
flip flops? For your safety, please go put some shoes on. And thanks for making these vids
Do you absolutely have to remove the bottom part of the seat?
Hi and thanks for the comment, some people try to work with their seats in the vehicle and immediately regret it. The main reason is that you have to know where you are clipping the covers to which is underneath the seat frame and usually a couple things happen: 1. the covers rip since they are being tugged in a way they should not be tugged. 2. You will clip into the wrong spot and your install will not look as great 3. You might damage a power cord or cut your hand with the frame. 4. It will probably save you at least an hour of work since you will struggle in getting to the right spots (door, steering wheel, center seat or console in the way). But you can still try and do the install with the seats in the vehicle we would just not recommend it.
TheSeatShop thanks for the response! With the seat out of the vehicle, can I just roll up the seat back cover to get a new heating element in or do I need to remove the bottom foam etc ?
@@PeterEss it will depend on the top or bottom seat section, for the top you can unroll the top to remove the heating element. For the bottom, you will need to remove the cover. But the easiest item to remove is the bottom foam since it just sits on the frame, how it works is the cover velcros onto the foam and then wraps around the foam and clips to the frame underneath the seat. This video should explain the process if need be you can just fast forward or jump around the video.
TheSeatShop yup makes sense. I already did the bottom and realized the top is also faulty. Trying to avoid removing the bottom again 😄
I couldn't help but notice how the top of the seatbelt wasn't loosened up from the seat by you at all, and as you took the seat cover off, it lifted off from the seat a good 3 inches. AREYOU KIDDING ME???? The seat cover is what hold it in place???? damn! no wonder Tahoe and Suburban owners get injured so badly when they hit another SUV. That can't possibly hold the average 300lb American. OUCH!!!
Maybe you should’ve just added how to take off the arm rest in the video also instead of making a separate video of it?
Nice job guys, but, honestly, you work kinda messy...06:11