It would have to be a new engine and a tensioner 😊. I’ve never seen a mechanic sell an engine for a “unethical” reason. But I have seen them sold for the wrong reasons “incorrect diagnosis” more than once!
One of my customers had their car towed to Pep Boy's after it died driving down the highway. They told him his motor was locked up solid and had to be replaced. He wanted a second opinion so I went down to the Pep Boy's. Put a breaker bar on the crank pulley and sure enough it would not turn. Pep Boy's mechanic came out all proud, "it needs a motor". I asked if he tried removing the belt. "nope, don't need to because the motors locked up." So I quickly yanked off the belt and started the engine. A/C compressor had locked up solid. Pep Boy's mechanic was no longer in the mood for conversation.
Pep Boys here in Glendale/Peoria AZ is the most dishonest and disgusting shopyou could imagine. Absolutely horrible. I wouldn't take a $2 bicycle to that place
The same thing happened to my daughters car . She had a Honda civic ,and the a/c compressor locked up coming off the expressway . The mechanic was puzzled at first why motor was locked up and couldn’t turn over . He figured it out with breaker bar on main pulley , saw belt and pulleys move except for compressor
@@NobodyUROnly if they do a cheap and honest fix like Eric does. Probably could have stuck that poor guy for a WHOLE bunch. This area is very fortunate to have an honest mechanic like Eric.
Put a bunch of part numbers into the oil pan. OK, not going to lie, that was hilarious and I nearly spewed and inhaled my coffee at the same time. Consider that phrase stolen. Short but sweet and Mrs. O was there too!! Great video, Mr. O. Loved it.
Tighten bolt. Put belt on. Check bolt tension. Assemble bit and bobs. Check bolt tension. Close hood and while driving it back to the parking lot remember to check the bolt tension. Shut off engine and go get 15mm wrench to check bolt tension. Call customer to pick up vehicle. Can't sleep at 3am because you can't remember if you tightened the bolt. Gotta love being a mechanic.
You are a good man. You save your customer SO MUCH MONEY, I hope they appreciate it. If I lived near you and had a vehicle that wasn’t under factory, I’d drive from home town, Geneva, and get my Chevy serviced. I hope my young grandson, a GM CERTIFIED MECHANIC, at 24 YO, would be like you
My father, God rest his soul, always said GMC stood for Great Man's Chariot. His had my all time favorite bumper sticker: "Yes this is my truck. No, I won't help you move."
I've had a Ford Pickup for over 20 years now. . .When I asked to help move someone, I always answer' "You can use my truck, I'll do the driving, you load and unload!"
Mrs. O is a phenomenal diagnostic specialist!! Eric pulled in and Mrs. O said “lol that’s not a tick!” So crazy how fast that went out according to the owner! God bless~
Don't put things in quotes when that's not what she said. You're paraphrasing, you basically just made it up. There you go, you learned two things today.
Lost the idler on my F150, drifted into a grocery store parking lot and called for a rentacar. Looked under the hood and the belt was off and found the lose idler. Got to work, local ford had the part, grabbed part and some tools and when I got back to the truck there was a note 'from a mechanic' that he noticed my belt hanging down and to check it out before driving. Damn nice of him.
Mrs O is great. Her face when she said that sure aint no manifold leak. Those things have 3 belts. It's funny vehicles used to have multi belt setups. Then with serpente system everything on one belt. Now they are back to 2 or 3 belts
@@SouthMainAuto I was surprised you didn't sell him a new belt, you know, "while we're in there". Literally zero extra labor to just put a new belt on. Maybe that one was in really good shape, couldn't see belt condition that well on the video.
I work for Factory Motor Parts. We bought all the Auto Plus Stores in the area. We supply Genuine original equipment GM and Motorcraft Parts. OE AC Delco and Motorcraft batteries. Along with aftermarket parts, Drive products Moog etc.. Probably cheaper than your local dealer too, Which FMP supplies parts too. Thank you Eric for the great videos.
Another day another chevrolet! The German equivalent is 'Alle tage ein andere Volkswagen' I work in the Netherlands and we work on VAG cars as much as you work on GMs
This guy is my hero! Eric is so knowledgeable when it comes to all aspects of Automotive Repair. I live in Brooklyn New York and I'm going to send him my 2007 GMC Yukon Denali to diagnose and I'm sure he will find a problem as so many others have failed in diagnosing the dreaded P0300😢 I know he will definitely find the issue and solve the problem! I am a huge huge fan
"That sounds a lot better!" That, sir, is the understatement of the year!!! Well done!! Need more honest and reliable people/mechanics like you in the world. "I thought it was going to put a lot of part numbers in the bottom of the oil pan." had me lol, truly enjoy the dry wit and humor from you.
FMP, Factory Motor Parts is out of Minneapolis, largest ACDelco Distributor in the country by dollar volume and foot print. Over the past 20 years, half a dozen of the big ACDelco distributors have been buying up independent parts operators that have multiple stores. (Jobbers) FMP has access to ACDelco and Motorcraft OEM parts, as well as all the other big brands like Gates etc.
I was so happy to see it was just the Tension Pulley!! I have a Chevy with the exact Motor and boy did that noise scare me. Thanks for showing us its not Always the worst case.....Eric this was by no means a "silly" video. As I said above I can't be the only GM 5.3 owner that had a lump in their throat when you first started it. The amount of exhales when you found the pulley was heard around the world!
Eric, That had to ve the quickest diagnosis to date on SMA. When the head diagnostician(??) Mrs. "O" is shaking her head as you pulled in, I nearly lost it. She was ready to put a stick of TNT up its tail hole and put the poor thing out of its misery 😢😢. Thank God calmer heads prevailed and another bowtie buddy is still wandering the back roads of NY😂😂
Back in the day (1976-80), all parts stores were privately owned in Cheyenne, WY. I usually did business with the one open on Sundays, as they were Saturday Adventists and closed on Saturdays. Good people.
Decades ago I had a 1970 Volvo 145. Driving it home from work on the freeway I heard the unmistakable sound of a rod knock. I got it home and dropped the pan... no loose rod bearings! The sound, even at pull-through, was actually coming from under the timing cover. The fiber ringed timing gear had separated, with the fiber piece riding up until it slapped back down. I replaced the gear and all was well.
Been there done that with my 145 somewhere on Vermont Route 29 east of Schuylerville, NY. I pulled the timing cover in the Summer sun while my work partner first hitched to town for a 1 1/16" socket and then to Albany for a timing set ($110.00). Installed the new gears, tightened the nut and snapped the end right off the camshaft. What a day! We still had to go to Marine city, Michigan and I was burned to a sun-fired crisp. Good times. Not quite 50 years ago!
I love that it turned out to be something simple. We always expect the worst, and hope for the best. And thank GOD for the blessings 🙌. Nice video Eric 🎉
You are a mechanical genius. The way you attack a malfunction from code number through your paid wiring service, following power and ground until you discover the problem. Your corrosion expectations many times direct you to the simplest of solutions. I wish i lived closer to you.
Eric, I kind of get a chuckle every time you talk about GM vehicles. I have a 2001 GMC Sierra Z71 with a 5.3L V8 that I bought new off the local GMC dealership car lot back in 2001 and it runs great and it still has its original belt tensioner, and original engine, trans, transfer case, differential, water pump, alternator, exhaust, etc etc so they can last a while.
Super job as always South Main Auto LLC! And the Videos are never too silly you are teaching the masses, and that = Priceless for those who are not aware. My 1992 BMW is rattling this spring when I took it out of storage, I'm afraid to look but you give me new hope that maybe it won't be the water pump and this old guy can relax.👍
The best videos are when Mrs O’ appears and the interaction with you. It’s obvious that you two are a based couple and still like each other! This is saying a lot for marriage! It can work, even at work with the right mate! Plus, you gave me hope for my GMC Sierra! Thought for sure the DMF took out the cam when I heard you start that truck
Don't you love it when that happens and you know it's *NOT* an issue. Good boss is like gold. Little tyrant can ruin the whole week. Think we've all had both kinds.
Your phones only gonna get more popular, your the best. People are starting to realize they need the best. You'd have all my business if you were in my area.
NOT a silly video! Genius mechanic had it narrowed to accessory area before pulling it in the garage. Love your stuff. The other guy might have tried to sell a new engine. Integrity Honesty you
Ooooo a video. A tick!? That sounds horrendous. I thought it was going to sound like my gmc, got a lifter tick, old 5.3. Tick tick tick, all the time. My bet on the red one is either a water pump failure or maybe timing chain. 🤷♂️ *I was wrong*
Hello Mr O! That was only easy because of all the experience you have! Also, Love the narration. That's a major part of SMA. Great video and good to see Mrs O. Be safe and have fun.
@ 5:14, Can't help myself. Way back when Steve Allen had his 11:?? PM show I'd stay up Friday nights and watch it, late 50s early 60s. You could hear a car horn outside honk on air, and Steve, no matter what he was involved in, would yell, "I'll be right out" as do I mentally to this day. I guess it's an age thing.
Not so small a blessing to have a life life partner that "gets" what you do. If I'm out in the driveway DIYing it to trade $1000 in shop labor for knuckle wounds, all my wife usually says to me is "are you done playing around yet? I need to go save 2$ because mayo is on sale!"
Welcome to my world bro. Really has no appreciation for my saving money by DIYing things. I can't start car repair because she has a nail appt. Yet I have to dyi car repair so we can afford her nail appt.
I'll take 10 of those a day to keep the lights on! Most of the shops around me did just that, (service/maintenance) jobs. Some would ask why I was doing engine and transmissions? "Because somebody has too" more work in the end butt I got paid. Keep up the good work Professor O! 😎✌🤟
The noise sounded like the valves were getting destroyed by the cylinders. Little ticking noise? I would be afraid to know what a big ticking noise is for this owner. Bad tensioner. This owner is lucky as anything. Thanks for sharing. It restores my faith in humanity that something good happened here. I have a good GM car - a 2018 Buick Envision. Now with 90,000 miles and nothing has gone wrong with it. Knock on wood but the car was built for 7 years as it was so they had time to use warranty data and six sigma to re-engineer many parts to make them better and last much longer. So far so good.
Scared me as well when you first cranked it, I thought it had completely wiped the valvetrain. Good thing he has you for a mechanic, he could've been taken to the cleaners.
Good and simple. Had a tensioner on a 90's Monte Carlo that broke and broke the serpentine belt. AAA got me towed to garage for which I was already scheduled for a NY State inspection. Told owner it's a little more than inspection now.
Not a silly video at all, learn no matter what, plus the reactions of you and Mrs. O, totally worth it, belted out laughing hearing her reaction 😂 and yours in the beginning.
I have a 2015 that the tensioner pulley was fine one day, started talking to birds the next, then cut the width of the belt right down the middle the day after that. It went from fine to nearly catastrophic nearly instantly.
Dang that was very loud and scary it sound like something was about to let go in the engine today with the customers lucky day turn out to be something simple instead of major work good job Eric has always😂😂
Not a silly video at all! I bought a 1981 Impala with 80k & a "bad engine." They were told that the rod bearings were shot. I bought it thinking I could have a reman engine installed & still had a great deal. Turned out one of the screws that hold down the distributor rotor came off & was rattling around the cap. I rebuilt the leaking carb & put 200k on before it got tee-boned.
That's why I rotate my belt every other oil change along with my tires so I can check all the roller bearings and get maximum belt life with even wear.
You could have sold that guy a new engine. There's a special place in heaven for ethical mechanics.
It would have to be a new engine and a tensioner 😊. I’ve never seen a mechanic sell an engine for a “unethical” reason. But I have seen them sold for the wrong reasons “incorrect diagnosis” more than once!
Busy shop wouldn't need to get involved in unnecessary engine replacements. They want to make money and ship cars out quickly.
@@vadim7590exactly and most mechanics are not interested in replacing perfectly good parts
"YOU" does not apply. What happens when owner gets a second opinion? Nitwit.
@notchback93 they do when the need an LS for their project car in the back of the shop
The look on Mrs. O's face as you pulled the truck up to the lift, absolutely priceless!
So easy she could have fixed it and had hubby dealing with troll calls. That would make a great video..... job swap for a day.
When she said I don't think thats the manifold, it turned me on..
@@SwickazNow, be nice😢😢
Yep, video was totally worth it for that alone. Car repair comedy gold!
@@harrylister804 Just don't let them swap clothes. I do NOT want to see Mr. O. dressed like Mrs. O.
One of my customers had their car towed to Pep Boy's after it died driving down the highway. They told him his motor was locked up solid and had to be replaced. He wanted a second opinion so I went down to the Pep Boy's. Put a breaker bar on the crank pulley and sure enough it would not turn. Pep Boy's mechanic came out all proud, "it needs a motor". I asked if he tried removing the belt. "nope, don't need to because the motors locked up." So I quickly yanked off the belt and started the engine. A/C compressor had locked up solid. Pep Boy's mechanic was no longer in the mood for conversation.
Pep Boys here in Glendale/Peoria AZ is the most dishonest and disgusting shopyou could imagine. Absolutely horrible. I wouldn't take a $2 bicycle to that place
The same thing happened to my daughters car . She had a Honda civic ,and the a/c compressor locked up coming off the expressway . The mechanic was puzzled at first why motor was locked up and couldn’t turn over . He figured it out with breaker bar on main pulley , saw belt and pulleys move except for compressor
Never a good sign when your mechanic IMMEDIATELY shuts the truck down as soon as he hears it running :)
Good sign you have a decent mechanic though.
@@NobodyUROnly if they do a cheap and honest fix like Eric does. Probably could have stuck that poor guy for a WHOLE bunch. This area is very fortunate to have an honest mechanic like Eric.
Mechanic: "Holy SH!T! I gotta turn that off!"
@@markh.6687 Me thinkst something is afoul in paradise😱😱😱
That would be normal procedure for a 5.4 Ford.😂 No one wants to be the one in drivers seat when they quit.
Put a bunch of part numbers into the oil pan.
OK, not going to lie, that was hilarious and I nearly spewed and inhaled my coffee at the same time.
Consider that phrase stolen.
Short but sweet and Mrs. O was there too!! Great video, Mr. O. Loved it.
I'm sure I stole it at some point haha
Hey you deserve an easy one once in a while
Tighten bolt. Put belt on. Check bolt tension. Assemble bit and bobs. Check bolt tension. Close hood and while driving it back to the parking lot remember to check the bolt tension. Shut off engine and go get 15mm wrench to check bolt tension. Call customer to pick up vehicle. Can't sleep at 3am because you can't remember if you tightened the bolt. Gotta love being a mechanic.
You are a good man. You save your customer SO MUCH MONEY, I hope they appreciate it. If I lived near you and had a vehicle that wasn’t under factory, I’d drive from home town, Geneva, and get my Chevy serviced. I hope my young grandson, a GM CERTIFIED MECHANIC, at 24 YO, would be like you
Definitely not a wasted video. Never assume anything. Diagnose properly. Might save time and money! Great video as always!!! 👍🏻👍🏻
This wasn't a silly video. I was truly relieved for this guy.
Every Chevy truck owner wishes their tick tick noise was just the tensioner. great video.
Very true
That GMC sounds like the time my garbage disposal tried to eat a spoon !!
I have a spoon that's permanently maimed from the same happening to it!
My father, God rest his soul, always said GMC stood for Great Man's Chariot. His had my all time favorite bumper sticker: "Yes this is my truck. No, I won't help you move."
They're junkers now
Very true. Owning a van, everyone assumes your a free removal company.
Garage Mans Companion
Gotta Mechanic Comin
I've had a Ford Pickup for over 20 years now. . .When I asked to help move someone, I always answer' "You can use my truck, I'll do the driving, you load and unload!"
Mrs. O is a phenomenal diagnostic specialist!! Eric pulled in and Mrs. O said “lol that’s not a tick!” So crazy how fast that went out according to the owner!
God bless~
No, she said "that's not an exhaust manifold". Exhaust manifold leaks can sound like ticking. She's picked a few things up over the years.
@@piquat1 thanks professor
Don't put things in quotes when that's not what she said. You're paraphrasing, you basically just made it up. There you go, you learned two things today.
@@piquat1 oh I definitely learned something today that’s for sure!
This wasn't Mrs Os first rodeo she knew that wasn't manifolds. You two crack me up! 😂😂❤❤
I'm sure it will be soon tho, I spy a broken bolt on the front of the drivers manifold.
@@DavidScheiber PRNY always wins! 🤣🤣
Agreed! That is for sure the LOUDEST failing tensioner I have ever heard! Great content as always thanks
Did you see how loose that pulley was. That tensioner pulley was about 10-15 miles from leaving the chat, "I'm done, see ya"
Thanks a bunch, Eric O! Now every time I hear a horn honk nearby, I find myself saying “hey it’s that guy” 😂😂
I yell hows the mom and them... 😅
"Horn blows; how 'bout the driver??"
Lost the idler on my F150, drifted into a grocery store parking lot and called for a rentacar. Looked under the hood and the belt was off and found the lose idler. Got to work, local ford had the part, grabbed part and some tools and when I got back to the truck there was a note 'from a mechanic' that he noticed my belt hanging down and to check it out before driving. Damn nice of him.
Mrs O is great. Her face when she said that sure aint no manifold leak. Those things have 3 belts. It's funny vehicles used to have multi belt setups. Then with serpente system everything on one belt. Now they are back to 2 or 3 belts
I think it's just two, a stretch belt for the A/C, and serpentine belt for the rest of the accessories.
@@brnmcc01 3 for that generation. Vacuum.pump has its own belt
Remember Eric we like to watch the simple videos too.
It’s no difference than kids who watch other kids play video games.
I thought it was a Diesel engine! Love the O! statement when you started the engine the first time.
I think the diesels are quieter haha
I would have said, go throw some fuel oil in and move on. Probably could have added another 100 foot/lbs of torque.
@@SouthMainAuto I am wanting both 6.0 liter diesels in my Superduty and Excursion ARE quieter. The new diesels are very quiet. Exactly right!
@@SouthMainAuto I was surprised you didn't sell him a new belt, you know, "while we're in there". Literally zero extra labor to just put a new belt on. Maybe that one was in really good shape, couldn't see belt condition that well on the video.
I work for Factory Motor Parts. We bought all the Auto Plus Stores in the area. We supply Genuine original equipment GM and Motorcraft Parts. OE AC Delco and Motorcraft batteries. Along with aftermarket parts, Drive products Moog etc.. Probably cheaper than your local dealer too, Which FMP supplies parts too. Thank you Eric for the great videos.
FMP --- "not a sponsor" But you got a shot at it, Napper is slow to pull the trigger.
why does Mr O call you "fast freddies" ?
Definitely a great supplier! Use them alot , Webster Ny!
Another day another chevrolet!
The German equivalent is 'Alle tage ein andere Volkswagen'
I work in the Netherlands and we work on VAG cars as much as you work on GMs
VAG cars... that's hilarious as that's slang in the USA and quite fitting for a lot of the drivers.
I was scared it was the lifters! Nice to see Vanessa!
A swift fix, and we got to see the lovely Mrs O, what a great way to start the day.
Mrs O with the correct diagnosis there.
Quicker than Eric too!
This guy is my hero! Eric is so knowledgeable when it comes to all aspects of Automotive Repair. I live in Brooklyn New York and I'm going to send him my 2007 GMC Yukon Denali to diagnose and I'm sure he will find a problem as so many others have failed in diagnosing the dreaded P0300😢 I know he will definitely find the issue and solve the problem! I am a huge huge fan
"That sounds a lot better!"
That, sir, is the understatement of the year!!!
Well done!! Need more honest and reliable people/mechanics like you in the world.
"I thought it was going to put a lot of part numbers in the bottom of the oil pan." had me lol, truly enjoy the dry wit and humor from you.
I thought that GMC was going for a little trip, straight to the boneyard. Your diagnostic skills saved the day.
I thought it was going to be on it's way for a final trip to Bath, NY. To Wilbert's pick a part. 😁😁
There are no silly videos from you, all have worth. Thank you SMA. Erick and wife and feline. Blessings DVD:)
It was definitely NOT a wasted video, I never thought about removing a belt to run the engine as a diagnostic tool. Thank you.
Yeah, I usually just spin each pulley by hand to feel/hear anything
Sounded like Jim Rockford was ringin from the 70's.
I love it when Eric mimics the noises a vehicle makes with his mouth; especially the turbo. GREAT VIDEO!
And his torque wrench click. ;)
Some of that new fangled CHEVY THUNDER
Right!? Chevy Rattle!! Doesn't have the ring as Chevy Thunder!
Very useful video to show how to isolate parts and make a quick diagnosis. Never too silly Eric.
I'm impressed. Didn't even need a code reader!
I appreciate you showing us some of these things too. Its nice to know something so horrible could be so "simple."
FMP, Factory Motor Parts is out of Minneapolis, largest ACDelco Distributor in the country by dollar volume and foot print. Over the past 20 years, half a dozen of the big ACDelco distributors have been buying up independent parts operators that have multiple stores. (Jobbers) FMP has access to ACDelco and Motorcraft OEM parts, as well as all the other big brands like Gates etc.
Thank, was scrolling through to see what is FMP...
So a more direct store besides rock Auto parts 👍
Been watching for years and never heard the "batphone" ring before.
Thanks for showing some of the more mundane repairs. Not everything has to be a knock down drag out!!!!
I was so happy to see it was just the Tension Pulley!! I have a Chevy with the exact Motor and boy did that noise scare me. Thanks for showing us its not Always the worst case.....Eric this was by no means a "silly" video. As I said above I can't be the only GM 5.3 owner that had a lump in their throat when you first started it. The amount of exhales when you found the pulley was heard around the world!
Eric, That had to ve the quickest diagnosis to date on SMA. When the head diagnostician(??) Mrs. "O" is shaking her head as you pulled in, I nearly lost it. She was ready to put a stick of TNT up its tail hole and put the poor thing out of its misery 😢😢. Thank God calmer heads prevailed and another bowtie buddy is still wandering the back roads of NY😂😂
Love the GMC comment.....Get More Check$. Has to be the fastest fix ever on SMA! keepnem coming.
I think he said Get More Chicks. 😆
Back in the day (1976-80), all parts stores were privately owned in Cheyenne, WY. I usually did business with the one open on Sundays, as they were Saturday Adventists and closed on Saturdays. Good people.
Decades ago I had a 1970 Volvo 145. Driving it home from work on the freeway I heard the unmistakable sound of a rod knock. I got it home and dropped the pan... no loose rod bearings! The sound, even at pull-through, was actually coming from under the timing cover. The fiber ringed timing gear had separated, with the fiber piece riding up until it slapped back down. I replaced the gear and all was well.
Been there done that with my 145 somewhere on Vermont Route 29 east of Schuylerville, NY. I pulled the timing cover in the Summer sun while my work partner first hitched to town for a 1 1/16" socket and then to Albany for a timing set ($110.00). Installed the new gears, tightened the nut and snapped the end right off the camshaft. What a day! We still had to go to Marine city, Michigan and I was burned to a sun-fired crisp. Good times. Not quite 50 years ago!
I love that it turned out to be something simple. We always expect the worst, and hope for the best. And thank GOD for the blessings 🙌. Nice video Eric 🎉
You are a mechanical genius. The way you attack a malfunction from code number through your paid wiring service, following power and ground until you discover the problem. Your corrosion expectations many times direct you to the simplest of solutions. I wish i lived closer to you.
Eric, I kind of get a chuckle every time you talk about GM vehicles. I have a 2001 GMC Sierra Z71 with a 5.3L V8 that I bought new off the local GMC dealership car lot back in 2001 and it runs great and it still has its original belt tensioner, and original engine, trans, transfer case, differential, water pump, alternator, exhaust, etc etc so they can last a while.
Any video is great! They all give me enjoyment, and memories of growing up in a gas station.
Super job as always South Main Auto LLC! And the Videos are never too silly you are teaching the masses, and that = Priceless for those who are not aware. My 1992 BMW is rattling this spring when I took it out of storage, I'm afraid to look but you give me new hope that maybe it won't be the water pump and this old guy can relax.👍
The best videos are when Mrs O’ appears and the interaction with you. It’s obvious that you two are a based couple and still like each other!
This is saying a lot for marriage! It can work, even at work with the right mate!
Plus, you gave me hope for my GMC Sierra! Thought for sure the DMF took out the cam when I heard you start that truck
It's nice to know that not every terrible rattle will mean a catastrophic failure and a big bill.
Wow, it sure sounded like the engine was going south. Lucky customer.
Good to see Mrs.O! You deserve an easier job from time to time.
That guy passing by and tooting the horn is just another happy customer. YOUR the Best. Aaron from Canada.
Wow that sounded terrible I was expecting no oil but was all that noise for a tensioner
Same lol
Enjoyed this video. Nice to see something light and easy. Aside Mrs O for the win == "that's not a manifold"
Short or long, easy or complicated, we love them all! Thanks for being honest, Mr. O.
The owner will be very relieved it's just a belt tensioner 😁
In most garages, the louder the belt tensioner, the more expensive it is. ;)
Share the channel folks! This is good content. Let’s take Eric O to one million subs!!!!
Don`t you hate it why you pull into work the first thing in the morning and the boss is standing there, waiting on you! 🤣
Don't you love it when that happens and you know it's *NOT* an issue. Good boss is like gold. Little tyrant can ruin the whole week. Think we've all had both kinds.
Easy peasy. Not bad for a GM. You’re an honest man.
Your phones only gonna get more popular, your the best.
People are starting to realize they need the best.
You'd have all my business if you were in my area.
NOT a silly video! Genius mechanic had it narrowed to accessory area before pulling it in the garage. Love your stuff. The other guy might have tried to sell a new engine. Integrity Honesty you
I don't think of this as a wasted video at all. Very important to realize that what sounds like a disaster is just a simple fix! Thanks!
Ooooo a video. A tick!? That sounds horrendous.
I thought it was going to sound like my gmc, got a lifter tick, old 5.3. Tick tick tick, all the time.
My bet on the red one is either a water pump failure or maybe timing chain. 🤷♂️ *I was wrong*
Yeah I was half expecting to hear the common GM tick of the manifolds when it is cold. Surprised me a little lol
@@SouthMainAuto I bet!
There are no silly videos. This type of stuff is really helpful for the do it yourselfers
Hello Mr O! That was only easy because of all the experience you have! Also, Love the narration. That's a major part of SMA. Great video and good to see Mrs O. Be safe and have fun.
Maybe "a silly video" but it's very amusing and it put a smile on my face on this all too early morning
Your really awesome at what you do, Thanks
I appreciate that!
I had a tensioner go out in my '01 Duramax but it didn't sound anything like that one! No wonder you shut it down after first hearing.
Great coffee time video, 👍.
Nice to see a honest mechanic not many left
Well done Mr O always refreshing to see a great mechanic with integrity so many out there without lately.
Bowl of cereal and a SMA video will get your day started right! 👍👍
When a part diagnoses itself 🙂
Definitely not silly video. You sir, are a blessing. Saved your customer tons of money! Im sure he will be breathing fresh now.
Mr O saving a Chevy from the crusher again
@ 5:14, Can't help myself. Way back when Steve Allen had his 11:?? PM show I'd stay up Friday nights and watch it, late 50s early 60s. You could hear a car horn outside honk on air, and Steve, no matter what he was involved in, would yell, "I'll be right out" as do I mentally to this day. I guess it's an age thing.
Wow that sounded like terminal failure to start with 😂😊
Not so small a blessing to have a life life partner that "gets" what you do. If I'm out in the driveway DIYing it to trade $1000 in shop labor for knuckle wounds, all my wife usually says to me is "are you done playing around yet? I need to go save 2$ because mayo is on sale!"
Welcome to my world bro. Really has no appreciation for my saving money by DIYing things. I can't start car repair because she has a nail appt. Yet I have to dyi car repair so we can afford her nail appt.
Thanks as always, Eric!
I'll take 10 of those a day to keep the lights on!
Most of the shops around me did just that, (service/maintenance) jobs.
Some would ask why I was doing engine and transmissions?
"Because somebody has too" more work in the end butt I got paid.
Keep up the good work Professor O! 😎✌🤟
Wow, i have never heard a 5.3 idler make THAT much noise.
Outstanding !! 😮😂😊
Definitely not a wasted video. It's the kind of fix we always hope for when it's our own rig, but rarely get.
That is another reason I will be a lifelong viewer, honesty, integrity, and straightforward. Stay safe, and God bless
The noise sounded like the valves were getting destroyed by the cylinders. Little ticking noise? I would be afraid to know what a big ticking noise is for this owner. Bad tensioner. This owner is lucky as anything. Thanks for sharing. It restores my faith in humanity that something good happened here. I have a good GM car - a 2018 Buick Envision. Now with 90,000 miles and nothing has gone wrong with it. Knock on wood but the car was built for 7 years as it was so they had time to use warranty data and six sigma to re-engineer many parts to make them better and last much longer. So far so good.
I'm now addicted to this channel. Great stuffl! Watching from Vancouver.
Than you for the quiet stool.
Scared me as well when you first cranked it, I thought it had completely wiped the valvetrain. Good thing he has you for a mechanic, he could've been taken to the cleaners.
I been watching your channel for years and your content is about as educating as you can get. Thanks.
It is amazing there were any bearing balls still in the race.
Good and simple. Had a tensioner on a 90's Monte Carlo that broke and broke the serpentine belt. AAA got me towed to garage for which I was already scheduled for a NY State inspection. Told owner it's a little more than inspection now.
Definitely not a silly video. What a huge win for the owner
Not a silly video at all, learn no matter what, plus the reactions of you and Mrs. O, totally worth it, belted out laughing hearing her reaction 😂 and yours in the beginning.
I have a 2015 that the tensioner pulley was fine one day, started talking to birds the next, then cut the width of the belt right down the middle the day after that. It went from fine to nearly catastrophic nearly instantly.
Nothing is silly from SMA Eric, always something to learn.
Dang that was very loud and scary it sound like something was about to let go in the engine today with the customers lucky day turn out to be something simple instead of major work good job Eric has always😂😂
Waiting in the comment section!
Now what?
.
.
.
.
.
.
The lovely Mrs O makes her appearance!
You definitely married up!
Have a blessed day!
Not a silly video at all! I bought a 1981 Impala with 80k & a "bad engine." They were told that the rod bearings were shot. I bought it thinking I could have a reman engine installed & still had a great deal. Turned out one of the screws that hold down the distributor rotor came off & was rattling around the cap. I rebuilt the leaking carb & put 200k on before it got tee-boned.
That's why I rotate my belt every other oil change along with my tires so I can check all the roller bearings and get maximum belt life with even wear.