So sick of seeing sloppy work from contractors and so refreshing to see they are still people in the world that are willing to do things right! Thank you!
Thank you for this video had somebody throw a rock through the plastic area the end caps so I am going to try to do what you’re showing to build too it can’t thank you enough you’re making it look a lot easier if I was gonna have to tear the whole damn thing down and start again
This is just what I needed today. Bulding a 76x30 and about to start end walls so this is very helpful. My end walls have a garage door and a personal door, do you have any videos building out those in the end walls? No worries either way, great tutorial, very easy to follow and all good info!
Thanks for the kind words, and for watching. We don’t currently have any videos on the exact set up you have, but we do have a video on framing end walls out of steel, and installing personnel doors; those videos might help for what you have to do.
I would assume most reputable greenhouse suppliers would use end-cap channel that can fit two layers of plastic and the wire. Ours does, and it seems like others would likely agree that this is important.
Manufacturers of the polycarb state that it should NOT be. It is important to have the slots vertically oriented to allow condensation to leave the polycarbonate. I would recommend adding some horizontal framing to provide additional attachment locations for Double H channel. The only time we do polycarb horizontally like you describe is for small strips of it that get installed along the baseboards. Thanks for the comment, and for watching.
The structure should not sink, but earth, gravel, etc. could be added along the perimeter to create a better seal / to bring the earth up to the bottom of the polycarbonate. Thanks for watching!
Hi Chris, sorry about that and thanks for letting me know; I updated the video description to include Double-H channel and Single-h Channel. Here is a direct link to the polycarb products mentioned: www.tunnelvisionhoops.com/greenhouse-covers/polycarbonate/ Also, thanks for watching!
I have a hoop house like this but ends are plastic and I have had trouble with that I'm thinking of replacing it with poly any recommendations on where to buy from ?
I don’t think any big box stores carry them so I’d have to recommend your closest Ag supply store OR you can shoot us a list of what you need (and your zip code) and we can get you a quote with a shipping estimate. While we do sell 8mm twin wall polycarbonate, shipping costs can vary due to their size. Here is our contact us page, if you want to send us a message: www.tunnelvisionhoops.com/contact-us/
Just found your RUclips channel. Long story short: I was leasing my land to a hemp grower for CBD. They went bankrupt and I now own 11 greenhouses. They are in pretty bad shape. I've been going through doing "emergency" repairs to keep them operational. I ordered some pipe clamps from you as I am repairing the roll up sides which brings me to my question: Where can I find some plastic repair tape? Thanks in advance. (FYI I also have a RUclips Channel - But it's mostly for my family)
Wow, that is a wild story! Hopefully you can use the structures for something. Here is a link to our poly repair tape if you still need some: www.tunnelvisionhoops.com/poly-repair-tape-various-sizes/. Best of luck, thanks for sharing your RUclips Channel (I'll take a peep), and thanks for watching!
Get a complete structure Order of Operations install guide by joining our community here: www.tunnelvisionhoops.com/get-greenhouse-order-operations
So sick of seeing sloppy work from contractors and so refreshing to see they are still people in the world that are willing to do things right! Thank you!
Thanks a lot for the positive comment! In my opinion, it feels good trying to do things the right way. Thanks for watching!
I just finished my end-walls. Your video helped so much. Thank you for your knowledge and expertise!
Jeff, you’re very welcome! Love hearing about successful projects, and I’m happy you found the video helpful. Thanks for watching, and great work!
Thank you so much for showing a step-by-step how to do this properly
You’re welcome, Paula! Thank you so much for watching, and for the kind words!
I love the detail! Top quality videos, Sir!
Thanks for the feedback, and thanks for watching! 🤙
As usual great video Todd, this is going to be so helpful on my project.
Thanks for the kind words, Kevin. DEFINITELY should help on your project, and thanks for watching
Thank you for this video had somebody throw a rock through the plastic area the end caps so I am going to try to do what you’re showing to build too it can’t thank you enough you’re making it look a lot easier if I was gonna have to tear the whole damn thing down and start again
Thanks for watching, and for the kind words. Best of luck on your project!
It really answered a lot of questions
This is an amazing video that sorts out all questions that could ever pop up. Thank you!
Thanks for the kind words! Hope it helps you in your project, and thanks for watching!
Really interresting and informative. Thank you for sharing
Glad you enjoyed it, thanks for watching!
Great instructional video. Thank you.
You're welcome, thanks for watching!
Thanks so much for the detailed tutorial! It helps a lot.
You’re welcome! Happy you found it helpful :)
Excellent commentary! This greatly helps me in my build! Thank-you!
Thanks for the kind words, Ed! I’m happy to hear it’s helpful for your build!
What a great video. Thanks
Thanks for the comment, and kind words! Happy you found it helpful
This is just what I needed today. Bulding a 76x30 and about to start end walls so this is very helpful. My end walls have a garage door and a personal door, do you have any videos building out those in the end walls? No worries either way, great tutorial, very easy to follow and all good info!
Thanks for the kind words, and for watching. We don’t currently have any videos on the exact set up you have, but we do have a video on framing end walls out of steel, and installing personnel doors; those videos might help for what you have to do.
Thanks Todd for great video...really wanting to put this on my end walls
Thanks, Penny! It really is great stuff, it just takes a bit more patience on the install.
I have built the greenhouse, but getting plastic straight is quite a challence, so I ordere wiggel wire so I can install giggle wire. some positivity.
Thank you.
You’re more than welcome!
Thanks Todd. What an awesome video. Made me decide to do the same on one of my greenhouses
Thanks, Albert, happy to hear it. Hope the video helps you piece it all together!
Thanks for watching!
@@tunnelvisionhoops it will. very informative. I'm trying to build a double layered thing on the top (forget what it's called). but not the ends
Great video. Very informative.
Does most end cap typically allow space for two layers of poly and the wiggle wire?
I would assume most reputable greenhouse suppliers would use end-cap channel that can fit two layers of plastic and the wire. Ours does, and it seems like others would likely agree that this is important.
THANKS ALOT FROM CENTRAL AFS
You're welcome, Mohammadkhalil! Thank you for watching!
Good video!!
Thanks so much for watching, and for the kind words!
Can it be installed with the ribs horizontally? I have wood studs not spaced right.
Manufacturers of the polycarb state that it should NOT be. It is important to have the slots vertically oriented to allow condensation to leave the polycarbonate. I would recommend adding some horizontal framing to provide additional attachment locations for Double H channel.
The only time we do polycarb horizontally like you describe is for small strips of it that get installed along the baseboards.
Thanks for the comment, and for watching.
@@tunnelvisionhoops Thanks For the quick reply.
You're welcome!
Loved the video. Will the structure sink over time to seal the gap at the bottom of the polycarbonate endwalls?
The structure should not sink, but earth, gravel, etc. could be added along the perimeter to create a better seal / to bring the earth up to the bottom of the polycarbonate. Thanks for watching!
Where did you get the double H channel for the polycarbonate panels? I don't see them on the linked vendor's site? Thanks
Hi Chris, sorry about that and thanks for letting me know; I updated the video description to include Double-H channel and Single-h Channel. Here is a direct link to the polycarb products mentioned: www.tunnelvisionhoops.com/greenhouse-covers/polycarbonate/
Also, thanks for watching!
I have a hoop house like this but ends are plastic and I have had trouble with that I'm thinking of replacing it with poly any recommendations on where to buy from ?
I don’t think any big box stores carry them so I’d have to recommend your closest Ag supply store OR you can shoot us a list of what you need (and your zip code) and we can get you a quote with a shipping estimate. While we do sell 8mm twin wall polycarbonate, shipping costs can vary due to their size. Here is our contact us page, if you want to send us a message: www.tunnelvisionhoops.com/contact-us/
@@tunnelvisionhoops sent thank you!!!
what would you use to join the polycarbonate sheets in their lengths?
Double-H Channel, if I understand what you’re looking for correctly.
This relief cut will work on quonset greenhouse as well, correct?
Hi Coty, thanks for watching. Yes, the relief cut should work all the same to make bending that channel easier.
Nice!!!
Thanks, Cheryl!
Just found your RUclips channel. Long story short: I was leasing my land to a hemp grower for CBD. They went bankrupt and I now own 11 greenhouses. They are in pretty bad shape. I've been going through doing "emergency" repairs to keep them operational. I ordered some pipe clamps from you as I am repairing the roll up sides which brings me to my question: Where can I find some plastic repair tape? Thanks in advance. (FYI I also have a RUclips Channel - But it's mostly for my family)
Wow, that is a wild story! Hopefully you can use the structures for something. Here is a link to our poly repair tape if you still need some: www.tunnelvisionhoops.com/poly-repair-tape-various-sizes/.
Best of luck, thanks for sharing your RUclips Channel (I'll take a peep), and thanks for watching!