FIRST 4Runner with NEW Diode Dynamics SS5 Light Bar! | Announced at SEMA 2021!!!
HTML-код
- Опубликовано: 12 июл 2024
- Unveiled at SEMA 2021, this is the latest light bar from Diode Dynamics! The SS5 Pod system is one of the best, if not the best, light bar systems on the market for the money and the higher end systems can project over a mile...this system is insane. Check it out!
Current GIVEAWAY: pCZAfD1nLY...
CHECK OUT overland-engineer.com/deals for a huge list of discount codes!
4Runner Patch: overland-engineer.com/shop/p/...
Instagram: / overland_engineer
Website: www.overland-engineer.com
SS5 7 Pod White Crosslink Light Bar System (Sport): amzn.to/3umkQOa
Single SS5 Pod (Sport): www.diodedynamics.com/stage-s...
Diode Dynamics Universal SS5 Brackets: amzn.to/3L47f4W
Diode Dynamics Universal SS5 Brackets: www.diodedynamics.com/ss5-cro...
4Runner Build List: (Look below for discount codes!)
Wheels, Tires, Suspension:
Yokohama Geolandar M/T 003s: amzn.to/3qQoe42
Spidertrax 1.25" Spacers: amzn.to/3nr70YO
BMC Plates: runnin4tacos.com/products/4ru...
Larger Front Bumpstops: amzn.to/3ns2EQV
Toytec Rear Bumpstops Extensions: www.toyteclifts.com/43006-ttl...
RRW RR6-H Matte Dark Bronse (zero offset): www.relationsracewheels.com/c...
Exterior:
APEX Badlands 12k Winch: www.harborfreight.com/apex-12...
C4 Fab Lo Pro Bumper: c4fabrication.com/products/4r...
RSG Rocksliders: rsgmetalworks.com/collections...
UpTop Overland Bravo: www.uptopoverland.com/product...
Apache Storage Box: www.harborfreight.com/9800-we...
MaxiTrac 8ft Awning: www.napaonline.com/en/p/BK_MT...
Lighting, Electrical, Misc:
MyFak Large - alnk.to/c01NQOf
Throttle Grenade: blackopsoffroad.com.au/produc...
Powertrays: www.powertrays.com/collection...
PowerTrays Accessories (Dual MRBF): www.powertrays.com/products/a...
Switch Pros 9100: amzn.to/3HCqaCT
Harbor Freight Rock Lights: www.harborfreight.com/12-volt...
New Grill Lights (Diode Dynamics SSC1s): amzn.to/3DSst21
Diode Dynamics Fog Kit: amzn.to/38bPKhR
Diode Dynamics 30" Light Bar (Driving): amzn.to/3DzKvq7
Diode Dynamics SSC3s (White Combo): amzn.to/3HBd5de
AlphaRex Pros: amzn.to/3nt5QMa
LASFIT 4Runner H7 LSPlus Low Beam & High Beam: lddy.no/yjpi
LASFIT 4Runner Switchback Signal: lddy.no/yjph
Smittybuilt 2781: amzn.to/3tK6fdP
C4 Fabrication Dual Battery Tray: c4fabrication.com/products/4r...
ARB Diff Breather: amzn.to/3qQp0Ou
Midland MXT275: alnk.to/btgG7un
Midland 6dB gain antenna: alnk.to/aAGTdqH
Midland 6dB gain mount:
Rago Fabrication Dash Mount: www.ragofabrication.com/colle...
_________________________________________________________________________________________________
Disclaimers:
-only products specified in this video or a previous video have been supplied though a sponsorship or partnership
-some links may be part of an affiliate program to help support the channel.
-the music I use: www.epidemicsound.com/music/f...
Time
0:00 - Intro
2:01 - Unboxing
4:22 - Assembly & Setup
12:02 - Install
15:16 - Comparisons & Features 
Авто/Мото
Thx! Awesome video. Do you think four of these pods would fit behind the 5th Gen 4runner grill? (as a hidden lightbar) Thx again for the great vidoes!
Yo, your new intros are on point!
Thanks! Yeah they have improved some since I started haha. Also got a new camera recently so they should be pretty sweet going forward. 4K only going forward.
Nice build! Definitely a great way to mount those lights a little lower. I have a feeling that approach can be used for all sorts of rack mounting issues. Those brackets with the rubber feet that didn't extend long enough might be necessary to help support the array on bumpy roads. You might consider getting a longer bolt/thread material so that the rubber feet can make contact with the crossmember of your rack. How does this impact your electrical system? Do you still have enough power without the need for a second battery? Do you have a second battery? I don't remember. Thanks!
They look gorgeous! It be great if they, DD, created a light bar option for the SS3 and SSC1 series as well. Plus if the wiring loom could be contained within a machined conduit; whose length can be specific to the number of Light Pods then that would be the icing on the cake. But those Amber lenses look like jewels.
Yeah that would be sweet to see. I've seen a few people with ssc1 and ss3 bars but they seem to just mount them all to a crossbar.
What is the difference in all the four they sell. You said you have the sport. Which sport?? Thanks man
So lit!!💯🔥
So lit.
THAT LOOKS GREAT
Thanks!
Thanks for the info! Had the question about picking the backlight so I guess you pick the one you want and it'll stay that color until you change it. And to change it you have to turn the backlight on and off quickly then select your light color?
Yep!
Dope! I want.
looks sweet! Clean install. But that bar is pretty heavy, I hope those aluminum tabs can hold it during long (rough) offroad excursions.
I have since changed my mounts, they are in a RUclips short I posted pretty recently!
@@OverlandEngineer right on! I’ll check it out
I'm just wondering how you wired it to the swithpro? I'm looking to order them but I see 3 wires.
The DRL and actual light have their own positive wire coming out of the switch pros so two different switches. Then the ground is shared.
How is the wind noise? Thanks for sharing.
With it all by itself, I think I can slightly hear it but honestly it's not as bad as I was expecting.
Would 2 of these fit on your lopro bumper and clear the bull bar? I know lots of people run LP4's or 6s on theirs, but would love it if 2 SS5s could fit!
Yeah this is something that can be done. They will just be kind of close together and you would need some custom brackets. I think the ones they come with are too tall.
What are your thoughts on light patterns? Looking at getting a set to put in my hybrid bumper. Between the combos and driving light pattern.
Unless you have your mind set on something, I've heard you want the more concentrated lights higher up. I think that a wide pattern like fogs will diffuse too quickly on your roof. I would say go with combos if you need extra fog light right by your vehicle. But if you have a hybrid and plan to have fogs and a light bar then you could probably go with fogs, driving SS5s, and a spot 30" light bar. That would be a nice transition of light. It really all depends on the rest of your lighting setup! Hope that helps.
@@OverlandEngineer Currently rocking the ss3 yellow sport fogs, thinking about pulling the trigger on a light bar and ss5's with the sale, would you recommend a mix of yellow and white? Or go all yellow bellow and when I eventually get to a light bar up top I can go white up there.
@@hockeycrazynerd982 Thats sweet. Totally personal preference. What color is your rig? I really like the white lenses personally on the black rigs. I also tend to prefer white light but amber is really nice for fog and snow. Unpopular opinion but super functional is having both because they mix and are easy on the eyes. I'd always recommend yellow fogs and LED low beams and then after that its just whatever you prefer! Because the pods in the hybrid bumper will be side by side, I bet having matching lenses would be clean. I guess if I was you I would do yellow fogs, yellow SS5s, white 30" light bar, and white roof rack light bar eventually.
@@OverlandEngineer My rig is silver, and I think I agree with that exactly white ss5s for a bit more distance and a white light bar. Now to rewatch all your videos and teach myself how to wire...... Thank you for all your help really appreciate it!
@@hockeycrazynerd982 No problem! Thanks for the support!
Sixteen hundred smackers?! Boy oh boy! Woowee
Hahaha worth every smacker
What window visors are you running?
They are auto ventshade! or AVS. amzn.to/3qskvZh
Such a great video. I'm buying. Any discount code??
I wish...unfortunately if they give me one it will undercut dealers...
How'd you wire up the back light to your switch pro?
The backlight is just a positive wire, so the main lights and backlight share the same ground. I just put a ring terminal right on the backlight green wire and connected it to its own switchpro spot.
@@OverlandEngineer Got it. Thank you!
Can I install this light bar on a gobi roof rack ??
You can install it anywhere with the right brackets :)
Can you mount to a prinsu??
Oh sure. Sherpa has protype brackets in development to do it. Otherwise a simple bracket will work.
Maybe it’s just the camera? For 7 lights up there it doesn’t seem that bright, and the pattern seems focused on 1 small spot
It is not really supposed to throw very wide with the lens I chose. The camera also probably does not do the brightness justice and its more about comparing it to the other lights I have than using my camera as the stand alone test. I could just crank specific settings when editing this video to make them look like the brightest lights on planet earth.
Looks a bit high!
Yeah I plan to mount it lower but I had to get the video out to show you all!