I wish that were the case. I don’t have much to post on the M10M43 due to its unreliability I’ve seized selling it. The OS are virtually identical. If you need firmware for it I’m only a email away. (1.5.4 for M10M43)
Aside from just enabling IPv6 for services that might want/need it, do we get any other benefits? In theory with IPv6 we shouldnt need NAT, which was part of the whole idea in the change. But I'm guessing we still can't get that extrenally facing address that many of us might want, CGNAT is kind of a pain for some things. I just saw the firmware update from a few days ago and updated too, I might email you about a possible problem, but need to check again with this newer firmware.
The nat type issue is more related to the carrier side of things. I’ve got some tricks I’ve been trying and need someone to confirm so I’ll be waiting for that email to see if this might just yield an interesting result 💪🏼
@@RouterRelated Either the firmware or the Nat change has generally given me faster speeds. But my problem may need to wait for more rain and may have to do with switching between LTE and 5g. Need to monitor and see what happens.
What i did - turned on IPv6 pass through on my router, then enabled everything in this video EXCEPT I disabled "Ipv6 setting" at the top. Then it started working correctly
lots of info on the cheaper m10k21. I have the M10M43. not as many topics or info so I assume it doesn't have as many issues?
I wish that were the case. I don’t have much to post on the M10M43 due to its unreliability I’ve seized selling it. The OS are virtually identical. If you need firmware for it I’m only a email away. (1.5.4 for M10M43)
@@RouterRelatedwell thats depressing news. Is 1pm to early to start drinking? My ipv6 still doesn't work
@@crazyhass84 lol I sent you the firmware the qca ipq5018 usually has IPv6 enabled by default on the latest firmware
@RouterRelated Interesting, i read below its only for if ISP doesnt have ipv6 prefix. So GNAT doesn't? I would have thought TMobile did. Thank you
Does TTL need to be enabled?
That is only for phone or tab plans
@@RouterRelated if phone/tablet plans work without TTL on, will that pose an issue?
@@RedMarsupial TTL is solely for those plans and yes works with it on or off
Hello Alfredo, Dave here from Florida
What was that AT command for the carrier information?
at+qcainfo
looking forward to trying out the InvisaGig
My router is bricked, Do you have any method to unbrick the router.
Hold reset for 8 seconds
How do you get AT&T to work?
Insert sim
Revise imei
Reboot
Wrote back to you on the live chat with better info… sorry I was not awake at 2am
Aside from just enabling IPv6 for services that might want/need it, do we get any other benefits? In theory with IPv6 we shouldnt need NAT, which was part of the whole idea in the change. But I'm guessing we still can't get that extrenally facing address that many of us might want, CGNAT is kind of a pain for some things.
I just saw the firmware update from a few days ago and updated too, I might email you about a possible problem, but need to check again with this newer firmware.
The nat type issue is more related to the carrier side of things. I’ve got some tricks I’ve been trying and need someone to confirm so I’ll be waiting for that email to see if this might just yield an interesting result 💪🏼
@@RouterRelated Either the firmware or the Nat change has generally given me faster speeds. But my problem may need to wait for more rain and may have to do with switching between LTE and 5g. Need to monitor and see what happens.
What i did - turned on IPv6 pass through on my router, then enabled everything in this video EXCEPT I disabled "Ipv6 setting" at the top. Then it started working correctly
I followed all the steps and i still don't get the IPv6 address
Jump on live chat friend. I can’t do support on a RUclips vid :)
I just received mine a few hours ago. I did the firmware update, too. Firmware Version: 1.9.6-20230426-132828
Where you get the firmware file?