Amazing tutorial! One issue I found with the 1.0 update... The Fuel-Power Generators need to have their clock speeds changed to 60%/150MW. They changed the output and input amounts.
Thanks for pointing that out, didnt realised it. But you can also just use 5 Fuel-Power-Generator and have 1 running at 80% Clockspeed (If your are not making packed fuel, you can just use 5 of the Fuel Power-Gernerator). This saves some materials. The System should work fine with this setup.
@@Danny191 Probably, before the update you needed 8 Gens now you need only 5 (with one set to 80% if you do packed fuel). They Changed the Input and output. In Update 0.8 the input was 12 Fuel per minute. 12 x 8 = 96 and the other 4 from the packaged Fuel = 100 Fuel per minute. In the Update 1.0 the input is now 20 Fuel per minute! Now you need 4 gens running at 100% and one on 80% 4 x 20 = 80 80 + 16 (16 from the one underclocked to 80%) = 96 Fuel per minute and the other 4 from the packaged Fuel = 100 Fuel per Minute. This should work other wise look if you are producing 100 Fuel per Minute and check if your rubber and plastic isnt cloging up your system. Make some containers to store a bunch and then you can sink the rest if you want.
@@dasfettewalross8305 Thanks, actually just did this exact thing and was going post it here, but seems you guys are a few days ahead of me. Loved this in update 8, worked great. Still good with Tweaks in 1.0
On the note of Petroleum Coke - this can also be sent to a Coal Generator and used for power (in place of coal) before unlocking fuel stuffs. Great guide, thanks!
I have reached 1k subs!! THANK YOU!! It's been amazing seeing how much everyone enjoys the content I make! It really gives me the motivation to keep going. Here is to another 1k and beyond!
Please keep it up! Just started playing, and your videos are so clear and concise, and you’re so good at explaining how things work. I was just sad when I realized there weren’t that many.
Just finished setting this up. Super pleased with the 2.7 GW of power I now have going (along with the 2.5 coal power plants you showed me in another video). This stage would have caused me to burn out on another save. So thank you for getting me past that hump!
This is where I got stuck on my first long term play-through which took me away from the game for two years. Started a new save this week and your videos have been incredibly helpful. Although my main factory is a spaghetti mess the oil setup I made based off this guide is neat and running at perfect efficiency. Onward to trains!
This guide is awesome!! The only thing thing that I would add is a total count of all the machines used so that people don't have to make multiple trips and can do it in 1 invent.
Feel ya Buddy Had to jumpslide 5 times 2k (one way) for every damn Part Because i was to stupid/Lazy to count the machines After watching it 3 times Took me 5 Hours to build it 😂😂 Awesome Game enjoyed every unnececary Minute 😆🥰🥰
Worked perfectly for 1.0 with a minor adjustment to 6 fuel generators with one slightly underclocked to allow for packaged fuel. This was also very helpful for managing the transition to the generators without the by-products backing up and causing a shutdown - thank you.
@@ethanlunan1391 I only have 2 somersloops (S) and this is what I do . 300 snail overclock oil extractor -> 150 (heavy oil) from 10 refiners -> 3 refiners (fuel) clocked at 20 - 40 - 80 (S) -> 140 fuel -> 6 generators at 20 fuel - 120 -> 20 fuel for packaged fuel. or the same thing, but add fuel generator for 7 total, reduce packaged fuel to 4 p/min, and underclock that last generator so it takes 16 fuel p/min
MY FELLOW PIONEERS! Make sure your math is mathing with the 1.0 update. You now only need 5 Fuel Powered Generators with one slightly underclocked for the packaged fuel. Happy building. And great guide!
Still watching and just finished Phase 1 and can already say I wish I'd found your video about a month ago when I first started dealing with oil. I struggled with it for about two days before getting it debugged, but your video is so clear and concise. Great job so far. Keep up the good work! Liked and subscribed.
This was so so helpful, thanks ! My coal mine was acting up with power whilst i was in the process of doing this today and I had to cut some temporary losses that I can now go fix! Note - after my plastic and rubber filled out and went into overflow, I had to replace the belt feeing into the smart splitter for it to then go up to the lifts.
WOW! Your video was amazing! I was getting frustrated because I was having a hard time mastering Oil. I was ready to give up on this game until I found your video. I look at so many others and I was just lost. You were very methodical and showed alot of overhead shots which was GREAT! It provided me with reference points. Great Job! Thank You!!
1.0 Changed this setup. To Power all 8 Generators, I needed to overhaul my plant. 8 Generators requires 160 Fuel 4 Refineries @ 100% provides 160 Fuel but costs 240 Heavy Oil Residue. No Excess for 8 Gens + Packager. Alternate running 6 Fuel Generators + Packager @ 100% with Packager OFF and 8 Generators. You don't have enough refineries at 150% to spare HOR for Packager and 8 Generators. Add 1 Plastic Refinery Overclock all 11 Plastic/Rubber Refineries to 150%. This produces 240 HOR. You will need 495 Crude Oil for the 11 Refineries Add a 2nd Pipeline at 100%. Connect it to the refinery pipeline at the opposite end as the 300 Crude / Min Pipeline If you power your Packager at 100% while you are remodeling, you should have thousands of Packaged Fuel in an industrial storage. You shouldn't need to run the packager for a while at this point. Bonus, with two sinks, you are producing 39K points per min.
Thank you so much for this guide. I am having a frustrating time getting the by products taken care of when making plastics and you solved it with the sink. I have 3 oil wells close together so off to make 3.6K MW of power on top of the coal and geothermal sources. Also just plugged in the Alien power generator so power will no longer be an issue. I will start this construction this week. Again thank you and I look forward to viewing the rest of your guides. Who knows I may just tear everything down and start base building for the 3rd time.
@@spectrumdad_ I use a website called [U6] Yet Another Factory Planner to perfectly balance out dule outputs . Then I found that while most machines can accept 4 disamol plases (1.1234) while valve only have 1 (1.1) witch made aluminum refinement way harder that it should. *even used some coal burners to balance it*
@@spectrumdad_ it really is. I have 9 tabs open with the schematic of large scale production systems to be built and already built as a ref if I were to look back at it. So helpfull
Just FYI. When 1.0 of satisfactory releases, the fuel generators are going to produce 250MW instead of the 150MW, so you'll get a lot more power out of fuel generators than in the video
This is such a brilliant video. I love the simplicity and the level of explaination. expecially when you explained how and why factories stop working. you are great. would love to see something like this for the different variations of turbo fuel
Looks like you've just started these last few months uploading. The quality is really there! I hope you keep going. Thank you for the guides, I just started playing and haphazardly came up with functioning (but(t) ugly) layouts like these. It's nice to see them in an optimal and and clean format. I'd def watch more let's play content as well!
Started SF some days ag; i'm at stage 0.5 generating petroleum coke from 2*plastics and 2*rubber refineries then feeding it to 4 coal generators powering my setup... works well while waiting for expansions :) awesome sinks are a must when dealing with localized fluid/solid mixes
When you said you wouldnt make a logistic floor at the begining of the video i told myself "well i'm gonna try and do it anyway! The factory look really clean like this! I love it!
Finally upgraded my PC and thought I'd get back into satisfactory now that I can more than 20fps at mid game! Thanks to you, you made this process a whole lot less stressful to figure out!
I followed your guide which was great by the way! However, I thought I'd be clever and load the fluids from my logistics-floor underneath. As you can guess I was having a bunch of problems with pipes not being full, and the buffer never filled up. I spent a while this morning learning more about head lift and found out that my under-floor loading of fluids is the problem. Looking forward to redesigning it and removing this issue. Thanks for the GREAT guide. I'm a about to tackle a huge oil-fired fired power plant on the west coast. :)
Great video. Everything is very clear and you present in a very engaging way. As I just unlocked Oil, I'll be setting up this exactly as you described in the next hour or so.
Really great video and much better than every other satisfactory content creator. Very easy to follow and no time wasted, only the important parts are shown. Keep it coming, these are great!
I love these videos. I need more lol. It’s getting confusing with so many things to keep building at the tier 5 and 6 stage. I would really love some videos about the machine that uses 3-4 different items to build one item. Keep up the good work
I loved this guide and how you split it into phases. I built all 3 phases and found myself low on fuel for my fuel generators. I'm not sure if its because of an update or any changes but my main issue was not having enough crude oil to supply all 10 refineries. I just decided to add a second oil extractor that hooks into the last 5 of my refineries. That solved all my problems. Hope this helps someone else!
As a follow up to this, I now realize that crude oil deposits come in pure and normal forms. The pure forms literally double your output. So when you place an extractor for this factory you need to have a pure crude oil deposit or 2 normal deposits.
I just started playing around Christmas and your layout guides have been invaluable. Keep up the good work and please keep going with some more layout guides and tips!
Love your guides. I made this last night. Watched this video a few times makins sure I followed it correctly. Been trouble shooting why 4 of my fuel generators are not getting enough fuel to operate.
Really well-made guide. Made transition to oil smooth as butter. I centralize everything & unfortunately the pure oil patch was like 2 km from my base but I'm planning to use the train in the future to bring the goods in. Because of that I'm wrapping my head around the computer production. Seems like you need buttload of plastic, like way more than I'm currently producing. If my calculations are correct, for 5 computers per minute (2 manufacturers, 7 assemblers with one underclocked I'm going to need 290 plastic per minute - That's crazy!
Could you shoot something like a perfect layout for the rotor factory or the same just for the modular blocks? That would help me a lot. I build my world from your layouts and even though I think I understand how it works, I would like to take a look at these more complex recipes such as rotors or modular blocks.
Another great tutorial. You're my go to for satisfactory stuff man. Keep it up. You're super clear and succinct. You can see how much people are flocking to this.
I think I've figured out how to do this exact set up in 1.0. It will need a total of 6 somersloops (excluding the ones you needed to get the 300 oil per minute for the Oil Extractor). I prefer thinking in desired result>how Im getting that result because it makes it easier for me to understand what I need to do and how I can get it. 8x Fuel Power with one underclocked to 80% need 156 fuel per min + 4 min for package- 160 fuel per min 3 refineries producing fuel, both at 100% and 1 with 2 "S" produce 160 fuel per min The 3 refineries use 180 heavy oil residue The 10 refineries produce 180 heavy oil residue- to do this you need to modify the rubber refineries. Adjust 1 refinery with 2 "S" and clock it to 75%. Add 2 "S" to 1 rubber refinery and leave at 100%. This will cause the 5 plastic refineries to produce 50 heavy oil residue, the unchanged 3 rubber refineries will produce 60 heavy oil residue, the adjusted 75% 2x "S" rubber refinery will produce 30, and the 100% 2x "S" will produce 40. The 10 refineries producing plastics and rubber total use is 292.5 oil. So you can underclock to meet that if you'd like. Leave a comment if it worked or not😀
I do a similar setup but I use the larger fluid buffers for the fuel so there are less trips to flush the system. To the left of the storages, I also set up drone ports when drones become available and can then fly the rubber and plastic to where I need it. Trucks work well, too. Edit: You did mention upgrading to the larger buffers later on
Now in the 1.0 the Oil Generators need more Fuel, from 12 to 20, u can get 5 of them working with this guide instead of 8 or have 4 working and the fuel cans, thanks for the guide!
Excellent build brother! Confirmed it still works in update 8, with the help of two additional pumps; One between the fuel buffer and generators, and also one between the oil extractor and the input manifold on the row of 10 refineries. Also, the oil extractor should be overclocked to 125% to match the 300 input of the combined 10x refineries. With some careful pipe and belt maneuvering, I was able to make the design slightly more compact. Mine is occupying a 16x17 foundation space.
I'd be curious to see how you would do it with a logistics floor. I'm attempting it modifying this guide as required, but it can be tedious at times. BTW. Thanks for these videos.
great guide, just a little thing that would help me as a noobie a lot is to know how many materials are required for it. since it is far from my main base i would have to gather it all in one time
Maybe I'm just not far enough along in my own progress, but I would like to know how you managed to float above your factory. You have a point of view in building out this petroleum plant that I don't know how to achieve.
Love your videos! I just did this last night and it does not work at first because I didnt realize you underclocked the packager haha! Great content!! Looking forward to many more!
If you dont under clock the packager though would that stop you having to flush the buffers all the time? My oil rig is ages away from the rest or my setup
Really enjoy your work! Your video is very helpful when starting out in this wonderful game! Great ideas on how to start my factory builds. Would love to see how you did your production floor for the oil layout.
Great video. Could you make a video about how to make a basic steel parts setup or a modular frame setup. Your videos are very easy to understand and I hope you will continue.
If you just turn oil into fuel you can send the polymer resin into the sink. you get more electricity that way too and less headache. then just work on plastic and rubber later.
I’ve just unlocked fuel generators so this is going to be my next power project 😂 I might have the generators on top and have the fuel come up from a lower floor, just to have it nice and compact
This video really helped me understand the creation of oil and fuel. Very, very, nicely done. You have another follower my good Sir. Thank You for making this game really enjoyable.
Thank you, thank you, thank you.. have a sub. honnestly this game is soo beyond my math comprehension and oil production has been a killer for me. thanks for a wonderful guide
hey spectrumdad.. enjoying your guides so far. really nice made =) im struggling with this one at 1.0... would u mind doing an update or just tell me here what i have to change that it works? :D
Thank u for good video. I just wanna give 1 advice. can u put all of buildings to make setup at the video start. In this way we craft all of items and make setup more quick.
Why do you need to add a pump prior to the packager? Wouldn't either the refineries or the fuel storages provide enough head lift to push the fuel into the packager?
The new Fuel-Powered Genertators need 20m³/min and produce 250mw. ill setup 5 with the last one undercloked to 80 %. THen everything runs fine again. Nice guide btw
Great design! But for the 1.0 numbers on the fuel generators got changed (or earlier idk). They now use 20/min on 100%. I build 4 generators and used the rest of the fuel on 20 packed fuel per minute. But overall great guide!
This is actually the best guide i've seen about oil, wich is complicated, honestly. The only problem for a newbie like me, just reached oil unlocked, is getting 300 MW on a total of 900 actually produced from my coal plant. I suppose i can start with a couple of refinery, produce some things and try to upgrade the milestones. Still, an excellent video, with the squares where to put the things explained. Thank you so much for your work. Just one curiosity please, what you use to fly? it's the regular jetpack or one of the Mod who allows you to fly? i'm trying to play totally vanilla, without using mods, wich made the positioning a real hell. I totally understand for the purpose of a video is absolutely more clear and easy (and to make the video short) to show the build to the top.
If you dont under clock the packager though would that stop you having to flush the buffers all the time? My oil rig is ages away from the rest or my setup
this got recommended to me almost on the DAY that I jsut setup my first oil setup, and I haven't even watched satisfactory videos in a long while. HOW DID THE ALGORITHIM KNOW?
The only issue I get is with the generators, the last 4 struggle for fuel. Ive let the pipes fill up entirely but they always end up going empty after some time. Im not sure why. Same thing with the rubber. The rubber always needs more fluid, but they take too much. Everything is level and shouldnt need a pump. Any tips?
I would turn off the first couple refineries in the oil line until the last machines fill up, then turn them back on. Then keep an eye on your pipeline. If done correctly it will keep up. What you can do is put a fluid buffer raised up before the first refinery, even just 1 foundation higher. That will help with potential backflow.
For 1.0 this still works, except you need to only have 5 fuel generators and underclock 1 to 80%.
Cheers ❤
just found your channel! Thanks for the careful and thoughtful walkthroughs and coming back to keep it up to date. :)
In your vid, you have 8 generators, are you saying we get the same power from just 5 with one of them set to 80%?? Basically build 5 not 8?
Is there a petroleum coke version for coal gens? Im still unlocking the milestone fuel generator
Thanks brodda
300oil is not making it to all refineries in 1.0
This guide was really well made. Splitting the guide into phase 1, 2 and 3 was a really good idea.
its really good, every part is stand alone. i like it!
Amazing tutorial!
One issue I found with the 1.0 update...
The Fuel-Power Generators need to have their clock speeds changed to 60%/150MW.
They changed the output and input amounts.
Thanks for pointing that out, didnt realised it. But you can also just use 5 Fuel-Power-Generator and have 1 running at 80% Clockspeed (If your are not making packed fuel, you can just use 5 of the Fuel Power-Gernerator). This saves some materials. The System should work fine with this setup.
Is that why my Gens are running out of power constantly?! goddamnt lol
@@Danny191 lol same problem the night session, already thouugt iam stupid xD
@@Danny191 Probably, before the update you needed 8 Gens now you need only 5 (with one set to 80% if you do packed fuel). They Changed the Input and output. In Update 0.8 the input was 12 Fuel per minute. 12 x 8 = 96 and the other 4 from the packaged Fuel = 100 Fuel per minute. In the Update 1.0 the input is now 20 Fuel per minute! Now you need 4 gens running at 100% and one on 80% 4 x 20 = 80 80 + 16 (16 from the one underclocked to 80%) = 96 Fuel per minute and the other 4 from the packaged Fuel = 100 Fuel per Minute. This should work other wise look if you are producing 100 Fuel per Minute and check if your rubber and plastic isnt cloging up your system. Make some containers to store a bunch and then you can sink the rest if you want.
@@dasfettewalross8305 Thanks, actually just did this exact thing and was going post it here, but seems you guys are a few days ahead of me. Loved this in update 8, worked great. Still good with Tweaks in 1.0
On the note of Petroleum Coke - this can also be sent to a Coal Generator and used for power (in place of coal) before unlocking fuel stuffs. Great guide, thanks!
I have reached 1k subs!! THANK YOU!! It's been amazing seeing how much everyone enjoys the content I make! It really gives me the motivation to keep going. Here is to another 1k and beyond!
Please keep it up! Just started playing, and your videos are so clear and concise, and you’re so good at explaining how things work. I was just sad when I realized there weren’t that many.
Make a satisfactory build video about the starter factory short that you did
3k let's go!
Here at 6.43k, congrats!! Love all the content. You are incredibly clear and concise in your explanations and it's helped me immensely.
here at 9.2k.. gaining fast!!
Just finished setting this up. Super pleased with the 2.7 GW of power I now have going (along with the 2.5 coal power plants you showed me in another video). This stage would have caused me to burn out on another save. So thank you for getting me past that hump!
This is where I got stuck on my first long term play-through which took me away from the game for two years. Started a new save this week and your videos have been incredibly helpful. Although my main factory is a spaghetti mess the oil setup I made based off this guide is neat and running at perfect efficiency. Onward to trains!
Same Here ❤
how's that save coming?
@@connorpervine1161 more spaghett than organized but it was fun. never got to trains started anew for update 8
This guide is awesome!! The only thing thing that I would add is a total count of all the machines used so that people don't have to make multiple trips and can do it in 1 invent.
I gotchu fam oil extractor:1 refinery:13 constructor:1 packager:1 fuel generator:8 awesome sink:1
Not including pipes, conveyors, etc...
Feel ya Buddy
Had to jumpslide 5 times 2k (one way) for every damn Part
Because i was to stupid/Lazy to count the machines After watching it 3 times
Took me 5 Hours to build it 😂😂
Awesome Game enjoyed every unnececary Minute 😆🥰🥰
Use the To Do List
Refinery has 10m headlift, lose the pump and don't underclock your packager. The fuel will go there last as it is raised
Worked perfectly for 1.0 with a minor adjustment to 6 fuel generators with one slightly underclocked to allow for packaged fuel. This was also very helpful for managing the transition to the generators without the by-products backing up and causing a shutdown - thank you.
which one did you under clock and by how much?
@@ethanlunan1391 I only have 2 somersloops (S) and this is what I do . 300 snail overclock oil extractor -> 150 (heavy oil) from 10 refiners -> 3 refiners (fuel) clocked at 20 - 40 - 80 (S) -> 140 fuel -> 6 generators at 20 fuel - 120 -> 20 fuel for packaged fuel.
or the same thing, but add fuel generator for 7 total, reduce packaged fuel to 4 p/min, and underclock that last generator so it takes 16 fuel p/min
I just underclocked all 8 generators to 60% (150MW), takes 96m³ of fuel and leaves 4m³ for the packaged fuel
MY FELLOW PIONEERS! Make sure your math is mathing with the 1.0 update. You now only need 5 Fuel Powered Generators with one slightly underclocked for the packaged fuel. Happy building. And great guide!
Can i add more of them?
Your tutorials are much appreciated -- I would not have been able to advance without them - JB (living in Guatemala, age 70)
Still watching and just finished Phase 1 and can already say I wish I'd found your video about a month ago when I first started dealing with oil. I struggled with it for about two days before getting it debugged, but your video is so clear and concise. Great job so far. Keep up the good work! Liked and subscribed.
This was so so helpful, thanks ! My coal mine was acting up with power whilst i was in the process of doing this today and I had to cut some temporary losses that I can now go fix!
Note - after my plastic and rubber filled out and went into overflow, I had to replace the belt feeing into the smart splitter for it to then go up to the lifts.
Dude, you have to be one of the top 3 Satisfactory content creators. Thank you so much!
WOW! Your video was amazing! I was getting frustrated because I was having a hard time mastering Oil. I was ready to give up on this game until I found your video. I look at so many others and I was just lost. You were very methodical and showed alot of overhead shots which was GREAT! It provided me with reference points. Great Job! Thank You!!
1.0 Changed this setup.
To Power all 8 Generators, I needed to overhaul my plant.
8 Generators requires 160 Fuel
4 Refineries @ 100% provides 160 Fuel but costs 240 Heavy Oil Residue. No Excess for 8 Gens + Packager.
Alternate running 6 Fuel Generators + Packager @ 100% with Packager OFF and 8 Generators. You don't have enough refineries at 150% to spare HOR for Packager and 8 Generators.
Add 1 Plastic Refinery
Overclock all 11 Plastic/Rubber Refineries to 150%. This produces 240 HOR.
You will need 495 Crude Oil for the 11 Refineries
Add a 2nd Pipeline at 100%. Connect it to the refinery pipeline at the opposite end as the 300 Crude / Min Pipeline
If you power your Packager at 100% while you are remodeling, you should have thousands of Packaged Fuel in an industrial storage. You shouldn't need to run the packager for a while at this point.
Bonus, with two sinks, you are producing 39K points per min.
Thank you so much for this guide. I am having a frustrating time getting the by products taken care of when making plastics and you solved it with the sink. I have 3 oil wells close together so off to make 3.6K MW of power on top of the coal and geothermal sources. Also just plugged in the Alien power generator so power will no longer be an issue. I will start this construction this week. Again thank you and I look forward to viewing the rest of your guides. Who knows I may just tear everything down and start base building for the 3rd time.
This was just what I needed. I was having a really hard time trying to figure out what to do with residual oil. Now I know! More power!!! 😊
With the platform grid system and your clear instructions, you have a really good way to explain things. I'm about to set off to find me some oil!
2:25 you took the time to explain and show, IN DETAIL the most difficult and over looked mechanic in the game...
:D
A lot of people struggle with that. :(.
@@spectrumdad_ I use a website called [U6] Yet Another Factory Planner to perfectly balance out dule outputs .
Then I found that while most machines can accept 4 disamol plases (1.1234) while valve only have 1 (1.1) witch made aluminum refinement way harder that it should. *even used some coal burners to balance it*
@@SpectrumWolf-hd7kf yea, that’s annoying lol. Good tool though!
@@spectrumdad_ it really is. I have 9 tabs open with the schematic of large scale production systems to be built and already built as a ref if I were to look back at it.
So helpfull
Dude I looked through several vids for an oil breakdown and this is the best one. Everything is explained and visible. Some good work
You’re videos are the best guide for this game. Simple, straight forward and clean. Thank you so much
Just FYI. When 1.0 of satisfactory releases, the fuel generators are going to produce 250MW instead of the 150MW, so you'll get a lot more power out of fuel generators than in the video
This is such a brilliant video. I love the simplicity and the level of explaination. expecially when you explained how and why factories stop working. you are great. would love to see something like this for the different variations of turbo fuel
Looks like you've just started these last few months uploading. The quality is really there! I hope you keep going.
Thank you for the guides, I just started playing and haphazardly came up with functioning (but(t) ugly) layouts like these. It's nice to see them in an optimal and and clean format.
I'd def watch more let's play content as well!
Thanks! Yes got lots planned!
I would be so lost without your guides, thank you so much for this.
Also the idea of splitting this guide into 3 phases is also really good :)
Started SF some days ag; i'm at stage 0.5 generating petroleum coke from 2*plastics and 2*rubber refineries then feeding it to 4 coal generators powering my setup... works well while waiting for expansions :) awesome sinks are a must when dealing with localized fluid/solid mixes
When you said you wouldnt make a logistic floor at the begining of the video i told myself "well i'm gonna try and do it anyway! The factory look really clean like this! I love it!
Finally upgraded my PC and thought I'd get back into satisfactory now that I can more than 20fps at mid game! Thanks to you, you made this process a whole lot less stressful to figure out!
the way you explain while you are doing what you do is awesome and very absorbable. thanks!
I followed your guide which was great by the way! However, I thought I'd be clever and load the fluids from my logistics-floor underneath. As you can guess I was having a bunch of problems with pipes not being full, and the buffer never filled up. I spent a while this morning learning more about head lift and found out that my under-floor loading of fluids is the problem. Looking forward to redesigning it and removing this issue. Thanks for the GREAT guide. I'm a about to tackle a huge oil-fired fired power plant on the west coast. :)
You are a gentleman and a scholar.
I like building myself but following this was like following Lego instructions, honestly very satisfying. Thank you sir.
Great video. Everything is very clear and you present in a very engaging way. As I just unlocked Oil, I'll be setting up this exactly as you described in the next hour or so.
As a player on the spectrum I love the guide and appreciate how straightforward it is to follow ∞
Glad you enjoyed it ❤️
Bro, your videos are a LIFESAVER!!!! You explain this stuff so well. Thanks!!!
Learn something new every day. I didn't know you could hotbar customizer presets.
Really great video and much better than every other satisfactory content creator. Very easy to follow and no time wasted, only the important parts are shown. Keep it coming, these are great!
I love these videos. I need more lol. It’s getting confusing with so many things to keep building at the tier 5 and 6 stage. I would really love some videos about the machine that uses 3-4 different items to build one item. Keep up the good work
Thanks! I plan on making videos for that for sure!
Hope you have more guides coming soon! theyre incredibly helpful for understanding the basic layouts!
thank you so much for making this. i was struggling hard trying to figure out oil and this solved everything
I loved this guide and how you split it into phases. I built all 3 phases and found myself low on fuel for my fuel generators. I'm not sure if its because of an update or any changes but my main issue was not having enough crude oil to supply all 10 refineries. I just decided to add a second oil extractor that hooks into the last 5 of my refineries. That solved all my problems. Hope this helps someone else!
As a follow up to this, I now realize that crude oil deposits come in pure and normal forms. The pure forms literally double your output. So when you place an extractor for this factory you need to have a pure crude oil deposit or 2 normal deposits.
@@whisstler also over clocking it seems to fix any hiccups
I just started playing around Christmas and your layout guides have been invaluable. Keep up the good work and please keep going with some more layout guides and tips!
This is such a great game, but its tough to learn. So pleased I came across your video, love how you present your content - thank you.
Love your guides. I made this last night. Watched this video a few times makins sure I followed it correctly. Been trouble shooting why 4 of my fuel generators are not getting enough fuel to operate.
Figured it out. I forgot to set the packager to 4 per min.
Really well-made guide. Made transition to oil smooth as butter.
I centralize everything & unfortunately the pure oil patch was like 2 km from my base but I'm planning to use the train in the future to bring the goods in.
Because of that I'm wrapping my head around the computer production. Seems like you need buttload of plastic, like way more than I'm currently producing. If my calculations are correct, for 5 computers per minute (2 manufacturers, 7 assemblers with one underclocked I'm going to need 290 plastic per minute - That's crazy!
Yea it's nuts. Always need more Plastic ! :)
Could you shoot something like a perfect layout for the rotor factory or the same just for the modular blocks? That would help me a lot. I build my world from your layouts and even though I think I understand how it works, I would like to take a look at these more complex recipes such as rotors or modular blocks.
Another great tutorial. You're my go to for satisfactory stuff man. Keep it up. You're super clear and succinct. You can see how much people are flocking to this.
definitly a usefull video i build this yesterday and am happy with results keep up the good content
I think I've figured out how to do this exact set up in 1.0. It will need a total of 6 somersloops (excluding the ones you needed to get the 300 oil per minute for the Oil Extractor). I prefer thinking in desired result>how Im getting that result because it makes it easier for me to understand what I need to do and how I can get it.
8x Fuel Power with one underclocked to 80% need 156 fuel per min + 4 min for package- 160 fuel per min
3 refineries producing fuel, both at 100% and 1 with 2 "S" produce 160 fuel per min
The 3 refineries use 180 heavy oil residue
The 10 refineries produce 180 heavy oil residue- to do this you need to modify the rubber refineries. Adjust 1 refinery with 2 "S" and clock it to 75%. Add 2 "S" to 1 rubber refinery and leave at 100%.
This will cause the 5 plastic refineries to produce 50 heavy oil residue, the unchanged 3 rubber refineries will produce 60 heavy oil residue, the adjusted 75% 2x "S" rubber refinery will produce 30, and the 100% 2x "S" will produce 40.
The 10 refineries producing plastics and rubber total use is 292.5 oil. So you can underclock to meet that if you'd like.
Leave a comment if it worked or not😀
This is the best channel i ever see doing tutorials keep doing them like this!!
I do a similar setup but I use the larger fluid buffers for the fuel so there are less trips to flush the system. To the left of the storages, I also set up drone ports when drones become available and can then fly the rubber and plastic to where I need it. Trucks work well, too. Edit: You did mention upgrading to the larger buffers later on
Excellent and helpful video! Thanks for the walkthrough!
Awesome Guide! Thank you for this very easy to understand guide of rubber and plastic !
I love you so much i feel so acomplished after building this
Now in the 1.0 the Oil Generators need more Fuel, from 12 to 20, u can get 5 of them working with this guide instead of 8 or have 4 working and the fuel cans, thanks for the guide!
HI Men! It's amazing how you explain all! Thanks for the simplicity
Excellent build brother! Confirmed it still works in update 8, with the help of two additional pumps; One between the fuel buffer and generators, and also one between the oil extractor and the input manifold on the row of 10 refineries. Also, the oil extractor should be overclocked to 125% to match the 300 input of the combined 10x refineries. With some careful pipe and belt maneuvering, I was able to make the design slightly more compact. Mine is occupying a 16x17 foundation space.
Nice, glad you got it to work. I did also manage to make it more compact in a play through myself. It's hard to show compact builds in guides though.
These video's will definitly help new player learn how these things work and let the progress further into the game. Great video, keep it up :)
Thanks :)
Love your stuff man!! Keep on keeping on!
Thanks :). Glad you enjoy my content!
Many thanks! Gonna be my very next project 😀👍🏻
I'd be curious to see how you would do it with a logistics floor. I'm attempting it modifying this guide as required, but it can be tedious at times.
BTW. Thanks for these videos.
This video is super well made, really informative and gave great tips on how to set oil up well. Thankyou for the awesome vid!
Awesome guide for a new player like me! Loved that you split it up in phases and great explanation of things!
Great video again! An steel guide would be great
Thanks! Yep I’ll do one.
Love your guides; thank you for sharing them. :)
Thanks for the awesome tutorial! Question, do I need a pump after the fluid buffer before the generators?
Concise, easy to follow. Subscribed!
great guide, just a little thing that would help me as a noobie a lot is to know how many materials are required for it. since it is far from my main base i would have to gather it all in one time
Maybe I'm just not far enough along in my own progress, but I would like to know how you managed to float above your factory. You have a point of view in building out this petroleum plant that I don't know how to achieve.
UPDATE 1.0 : Fuel generators now use 20m3/min so place five of them (100/20=5)
Why not 6 generators and remove the underclock from the refinery that's only doing 20? I'm new, so I don't know why this doesn't work :P
@@PureOctarine i guess that also works?
Awesome tutorial, thank you! 🤜🤛
Love your videos! I just did this last night and it does not work at first because I didnt realize you underclocked the packager haha! Great content!! Looking forward to many more!
Thanks, glad you found the problem !
If you dont under clock the packager though would that stop you having to flush the buffers all the time? My oil rig is ages away from the rest or my setup
@@MetaDataAutomation most likely. But you can’t forget to underclock it when you put the fuel generators in or you are going to have a bad time :)
Really enjoy your work! Your video is very helpful when starting out in this wonderful game! Great ideas on how to start my factory builds. Would love to see how you did your production floor for the oil layout.
Great video. Could you make a video about how to make a basic steel parts setup or a modular frame setup. Your videos are very easy to understand and I hope you will continue.
very good just did this both with the coal generators and this in the northern Forest. but in u8 seems to work with this too, great work dude
If you just turn oil into fuel you can send the polymer resin into the sink. you get more electricity that way too and less headache. then just work on plastic and rubber later.
I’ve just unlocked fuel generators so this is going to be my next power project 😂 I might have the generators on top and have the fuel come up from a lower floor, just to have it nice and compact
That works :)
Hi! Thx for your tips and layouts they are very usefull!!! You're amazing!!
Great video hope to see some more factory guides soon
This video really helped me understand the creation of oil and fuel. Very, very, nicely done. You have another follower my good Sir.
Thank You for making this game really enjoyable.
Glad I was able to help :)
Thank you, thank you, thank you.. have a sub. honnestly this game is soo beyond my math comprehension and oil production has been a killer for me. thanks for a wonderful guide
hey spectrumdad.. enjoying your guides so far. really nice made =) im struggling with this one at 1.0... would u mind doing an update or just tell me here what i have to change that it works? :D
Your videos are brilliant thank you.
Thank u for good video. I just wanna give 1 advice. can u put all of buildings to make setup at the video start. In this way we craft all of items and make setup more quick.
amazing guide and explanations. As a newbie on satisfactory, you made my experience really satisfactory ;)
Why do you need to add a pump prior to the packager? Wouldn't either the refineries or the fuel storages provide enough head lift to push the fuel into the packager?
Excellent video!
about to try to tackle this today, sadly though, i can't hover, so all that perfectly aligned goodness is going to be a pain :(
The new Fuel-Powered Genertators need 20m³/min and produce 250mw. ill setup 5 with the last one undercloked to 80 %. THen everything runs fine again. Nice guide btw
Thank you very much
Great design! But for the 1.0 numbers on the fuel generators got changed (or earlier idk). They now use 20/min on 100%. I build 4 generators and used the rest of the fuel on 20 packed fuel per minute. But overall great guide!
This video was awesome!
This is actually the best guide i've seen about oil, wich is complicated, honestly. The only problem for a newbie like me, just reached oil unlocked, is getting 300 MW on a total of 900 actually produced from my coal plant. I suppose i can start with a couple of refinery, produce some things and try to upgrade the milestones. Still, an excellent video, with the squares where to put the things explained. Thank you so much for your work. Just one curiosity please, what you use to fly? it's the regular jetpack or one of the Mod who allows you to fly? i'm trying to play totally vanilla, without using mods, wich made the positioning a real hell. I totally understand for the purpose of a video is absolutely more clear and easy (and to make the video short) to show the build to the top.
It’s the pak utility mod. Later on the hover pack will do the same.
@@spectrumdad_ Thank you very much!
yo this is a super good video, thanks dude
If you dont under clock the packager though would that stop you having to flush the buffers all the time? My oil rig is ages away from the rest or my setup
How did you power the first phases before you got the fuel generators???
Super vid , very good showing how to , gj. Thx
this got recommended to me almost on the DAY that I jsut setup my first oil setup, and I haven't even watched satisfactory videos in a long while. HOW DID THE ALGORITHIM KNOW?
😨
The only issue I get is with the generators, the last 4 struggle for fuel. Ive let the pipes fill up entirely but they always end up going empty after some time. Im not sure why. Same thing with the rubber. The rubber always needs more fluid, but they take too much. Everything is level and shouldnt need a pump. Any tips?
I would turn off the first couple refineries in the oil line until the last machines fill up, then turn them back on. Then keep an eye on your pipeline. If done correctly it will keep up. What you can do is put a fluid buffer raised up before the first refinery, even just 1 foundation higher. That will help with potential backflow.