Thanks very much for this. I recently increased my yaw values higher than pitch and roll, in one set to get snappier corners. Instead, I got these huge surges like you mentioned.
🤯Ok wow, that was helpful. I'd seen this but associated it with really high feed-forward and really high PD and/or PID slider settings in BetaFlight. Makes sense, I really only saw this when tuning to find the upper limits and doing really violent yaw moves LOS looking for erratic behavior (like jumps). Since I'm typically not agro on yaw - I never see this when flying and just thought I was setting my max FF and PIDs properly 😆 So yeah - thanks for the education - this is incredibly helpful!
Pretty interesting indeed, Mark! Thanks for all the tips! 😃 But yeah, you can't fight physics. Some other way need to be used. Anyway, stay safe there with your family! 🖖😊
never thought about it really just assumed I was pumping the throttle when doing a yaw so try to ark my movements down when doing so ....... MORE SLIDERS PLEASE DEV'S
Curious what lighter/heavier props do here... I'm guessing the rest of the flight envelope would be too unduly influenced if you carried heavier props just for yaw moves.
Hi there, I have a similar problem but not qzite the same I believe. My 7" has a very delayed yaw response on light and steong stick movements and I have no idea how to fix this. :(
I've just built a 5 inch drone, now testing the motors without the props, when I move the throttle up and down, things are normal, but when the throttle is even slightly up and I move the stick to left or right, the motors behave strangely, moving the throttle down after that doesn't slow down the motors. Could this be wire interference? Please help me out 🙏
If it is air mode that is causing this, you could program logical switches on the radio to have air mode off all the time, except when you go to cero throttle, so you get air mode only when you lower the throttle to cero. JB also has a video on this. would this fix the problem?
Why not reduce Yaw P Gain? Surely that would reduce the push on the motors? Also, what frame is that with the Air unit? I have a spare one kicking about and the freestyle frames are all ass heavy with it so I'm looking for a centre mounted frame.
Good day Mark. I have the superfly 6s tune with rpm. But it has no dynamic idle. I guess superfly doesn't use any. Can I add some ? Is the value 30 ? Someone told me to put 70 for superfly tune ? Thanks a bunch.
@@uavtech funny that ! because I don't see any of the top pilots using it , I think you need to get off the Jesus juice mate ...stop flogging yourself, it doesn't look pretty
great topic... i had (and still have) these jumps with a 7 inch and never understood why this particular quad was the only to have them. thanks !
My 6” Deadcat is doing it as well
Just build a 9 inch and had this problem.
This really helped. Thanks!!!
Thanks very much for this. I recently increased my yaw values higher than pitch and roll, in one set to get snappier corners. Instead, I got these huge surges like you mentioned.
Exactly what I've been looking for
Even kababfpv would be impressed by your teeth -proper white and straight! Also, thanks for the informative vid!👍
Airmode per axis is a really interesting idea
great tip, timely for my custom 7inch build. Thank you
🤯Ok wow, that was helpful. I'd seen this but associated it with really high feed-forward and really high PD and/or PID slider settings in BetaFlight. Makes sense, I really only saw this when tuning to find the upper limits and doing really violent yaw moves LOS looking for erratic behavior (like jumps). Since I'm typically not agro on yaw - I never see this when flying and just thought I was setting my max FF and PIDs properly 😆 So yeah - thanks for the education - this is incredibly helpful!
I like the fact at 0:44 that the props on the right side of the 5" quad Mark is holding is the correct color to be blending in with the background.
I redueced the I-Term for Yaw. It helps as well.
Pretty interesting indeed, Mark! Thanks for all the tips! 😃
But yeah, you can't fight physics. Some other way need to be used.
Anyway, stay safe there with your family! 🖖😊
Thanks Mark. Great info
Try iterm relax on RPY and see how it changes yaw bounce. It helped on my Hexplorers.
never thought about it really just assumed I was pumping the throttle when doing a yaw so try to ark my movements down when doing so ....... MORE SLIDERS PLEASE DEV'S
Some kind of Airmode intelligence would be so choice! I spend a ton of time upside-down and yaw panning in my freestyle.
Thanks
Curious what lighter/heavier props do here... I'm guessing the rest of the flight envelope would be too unduly influenced if you carried heavier props just for yaw moves.
I added a extra cap and the pwm to 48... had it to 24. Fixed
thank you for the tips really helpful..by the way you need to improve your green screen :)
yeah, it is too close, but oh well.
Hey Mark. I was wondering if you are going to give an opinion on the ELRS 3.0 RC1 1000hz packet rate? Thanks for all you do I really appreciate it 😁👍
Hi there, I have a similar problem but not qzite the same I believe. My 7" has a very delayed yaw response on light and steong stick movements and I have no idea how to fix this. :(
I've just built a 5 inch drone, now testing the motors without the props, when I move the throttle up and down, things are normal, but when the throttle is even slightly up and I move the stick to left or right, the motors behave strangely, moving the throttle down after that doesn't slow down the motors. Could this be wire interference? Please help me out 🙏
If it is air mode that is causing this, you could program logical switches on the radio to have air mode off all the time, except when you go to cero throttle, so you get air mode only when you lower the throttle to cero. JB also has a video on this. would this fix the problem?
Would reducing the yaw PID sum limit help?
Why not reduce Yaw P Gain? Surely that would reduce the push on the motors? Also, what frame is that with the Air unit? I have a spare one kicking about and the freestyle frames are all ass heavy with it so I'm looking for a centre mounted frame.
Where do you get those interdimensional props?
Mr. Steel. LOL.
I think reduce feedfoward only on yaw access works?
Good day Mark. I have the superfly 6s tune with rpm. But it has no dynamic idle. I guess superfly doesn't use any. Can I add some ? Is the value 30 ? Someone told me to put 70 for superfly tune ? Thanks a bunch.
30 to 40 is all you need. 70 is 7,000 RPM! That could be close to a hover if no GoPro
@@uavtech I thought so. I'll try 30. Any other tips for setting up dynamic idle on my drone ? Maybe you have a video ?
I have the airmode on the switch, you can't do playground slides with the airmode 😂
What about yaw falls?
"yaw falls"?
Didn't know motors spin down on fast yaw movements. Most of the props aren't designed to spin down..
Last
😂
Seriously though. Mark, your hair was ON POINT in this video!!
yaw jump is such a dirty dog.
two words - betaflight sucks !
but yet, it is still the best flying firmware you can put on a quad (as proven) 😝
@@uavtech funny that ! because I don't see any of the top pilots using it , I think you need to get off the Jesus juice mate ...stop flogging yourself, it doesn't look pretty
@@josh-westsidefly149 what do you prefer ? Emu flight ?