I guess you have succeeded in being able to use the hose again,BUT you lost A LOT of hose in the process,I guess it is what it is, IF you want to continue to use the old damaged hose/you don't want to replace it/buy a new one, I guess you could add links, from another hose/IF you can buy just the hose or salvage pieces from another hose.
I prefer using the quick connects to the house, hose(for a sprayer) & the garage utility sink. (Which has hot water. Great for washing the truck in winter)
Thank you. I've been dealing with a leaky hose for a couple of years. I tried flex seal. I tried flex seal tape. Neither worked. I didn't know a product like the female end you showed existed, but I recognized it from a hose my family owned when I was a kid. Thanks to this video, I was able to fix my hose for $7!
I've used the crimp on style, the hose clamp and the upgraded clamping style shown in the video. But my personal favorite is one made by Melnor that's all metal and has a compression nut, style 9003 & 9002. They are very low profile and don't interfere with hose reels and can't get caught on anything. Repaired 2 hoses that had bad connectors from the factory with these 20 years ago and they are still working great.
I recommend using a heat gun after you finish attaching the clamps and heat the rubber ends to shrink them a little bit around the brass fittings. From my experience it helps secure the fitting especially under pressure in a pressure washer.
Yep, thanks for that tip... I knew there had to be another way....mine won't hold any pressure...the second I turn it off at the sprinkler it blows out at the faucet. Thanks again
I've repaired several hoses over the years and only buy the premium hoses as they don't kink anywhere near as easy as a cheap hoses. They also tend to last the longest as well. I have also cut down longer hoses to make the exact size I need. I've used and liked the Gilmour Aluminum "sandwiched" type like you show and while the work great they are a bit bulky. I have been using the Orbit Brass hose menders and while they are a pain to install on thicker preminum hoses they look like a factory connection and don't hang up or get caught while dragging the hose around. Look for model numbers 56801N/56802N/56803N.
I'm actually jealous that you put these repair ends on a video. 🤣 I've used these, religiously, and never gave them a second thought. 100% cure! Lowe's garden center every time! Thank you and God bless! 😁👍
Absolutely! In Australia the older style brass hose fittings are almost non-existent anymore. Majority of fittings are the European style and makes things so easy.
Hi!!! I hope you see this message because I’m a big fan (and subscriber) of yours. Your video on edging the lawn is fantastic and my yard looks great. So now I have to repair a hose and now I know make sure I buy the “clamp “ that you screw on (no sharp edges). 🌸
Great video! I don’t think you mentioned that hoses come in a couple different diameters, so you want to make sure you get the correct diameter fittings for your size hose. I learned that the hard way 😉 Thanks for the information!
Pro tip: Don't use 5/8" hose. You wouldn't think that an additional 1/8" would make much difference, but it does. 3/4" hoses flow SO much better, especially on longer length hoses. On a 100ft hose, expect ~65% more flow. Especially if your plumbing infrastructure is beefy, 3/4" hose will make a hand sprayer or a garden sprinkler feel twice as strong.
Actually That depends on what you are looking to achieve. A smaller hose will actually give you more overall velocity. A smaller hose will have more resistance than a larger hose. You will see a 4 psi drop per 100 feet on a 5/8in hose vs a 2 psi drop on a 3/4. So if you want more velocity go 5/8. If you want more over all water flow volume...go 3/4.
@@skypallman6169 Wild. I am curious about the physics of that, but in practical terms, flow is everything. If I place a nozzle at the end of both hose diameters, the 3/4” hose sprays further. I work with hose a lot, lol
@@skypallman6169 if you didnt have a fitting at the end, that would be true. but having a nozzle (or your finger lol) at the end, a 3/4" hose will give you more velocity due to the higher head pressure at the nozzle.
That's how I set up multiple sprinklers with one hose also. Cut to desired length and use those good male/female fittings add a quick connector to the sprinkler also. Makes it a lot easier to water lawn if you don't have an irrigation system.
Always great content. Just had to do this after my winterized hose must have contained some water. Didn't know they made repair kits that had a double barbed connector. I bought a male and female connector and screwed them together. Learned something new today, which is why I subscribe and get notifications for each video
I use a 3/4" hose fitting, secured with a upinor pex ring, using a upinor pex expansion tool to expand the hose/expansion ring, then quickly slip onto the new fitting, it's awesome 👌
I just used an electric tape and I couldn’t believe it worked! Used a $1 item to fix a $30 dollar garden hose!!! My wife thought I was crazy. I thought I was crazy. It worked!! Lol
Here in the EU it's normal to have special garden hose quick disconnects, does that kind excist in the US? I always see these threads and look really annoying to use
New Hampshire here. We've had quick-connects in my family as long as I can remember. We also lived in Galway Ireland when I was a kid. Maybe we stole the idea there. I agree. Threaded hose connections look awful. I had no idea they existed!
@@geoffmooregm Never had issues with quick disconnects before. Other than plastic ones being damaged easy. Brass, Copper, or other metals are way better, and quick disconnects are nice. A thread wouldn't bother me to much, since I barely take stuff off.
@@autumn5592 I am not saying they don't work. I am saying they reduce flow. I have 3/4" plumbing from my main to the hose bib as well as a 3/4" hose. I am not going to put a quick connect on that when it chokes it down to 1/4"
Just a little FYI kinda warning. Those #1 and #4 heat up on the sun and overtime burst the hose right at this end (if there's water pressure all the time). My hose might be old but just FYI. Already happened 3 times to me over 2 summers
I'm not sure it's the heat. I had one in a shady spot blow off. I cut a clean end on the hose and use a worm gear clamp instead of the plastic one. So far no problems with the worm clamp mod.
The beginning of the video looks like a Billy Mays or Phil Swift commercial! It just needs the zoom in to black and white with the no symbol superimposed. "Oh-no! Not again! Has this ever happened to you? Are you tired of purposefully running over your garden hose with a lawn mower? Do you want to save hundreds of dollars a year? Silver Cymbal has the fix for you!"
The first method involving hose clamps works the best. The repair kits are 'ok' but IMHO don't hold as firmly as the ring clamps. Lastly: estate sales and thrift shops often sell perfectly great used hoses for really cheap. I recently purchased a nice one for $5... not much different than a repair kit.
Not sure how many people just run over their water hose with a lawn mower, but it would be cheaper and less time consuming to move it. I'll give you a thumbs up for the tutorial so you know I'm not hatin on ya.
I like the permanent wire type clamps. Once you have the tool you just need bailing wire. It's permanent and sits flush with the hose. If you want you can use electrical tape or heat shrink to cover it.
I used to feel the same, try one of the clamp kits sometime they are very good. I have a 200' hose by combining a 150 and 50 using them, be in place for a long time without issues.
i had that way of thinking too actually, but i just tried the inline clamp today from Lowes and its definitely better than using the normal clamp styles. Old hoses still have uses if they arent totally messed up though.. ended up fitting a previously used one into the bottom of a bucket a few weeks ago to catch leaking water from exit pluming when water is being used which was making the crawl space a little wet. And Boom, when the water gets high enough in the bucket the hose drains it to the sump pump so no more wet crawl space :)
Wish the guy at the store would’ve mentioned that type of clip. I hate the wire clamps because they do get caught on everything and they’re not very comfortable when they scrape against your hand or leg. But I do like the idea of inserting a piece of pipe PVC cop whatever is available inside the hose and then using the zip ties. I like that idea best.
Thanks. Just had a really hard time installing a Melnor kit. I'll try the sort you show. HD is asking ****$2**** for ONE hose clamp-- and you need two per joint! Not happy with them!
I first want to say I love your videos. Very informative. Thank you. My question is... I have fescue/bermuda however I have lots of weeds in my grass. The problem I have is I live in California central valley and it is already above 90 degrees... Is there a product I can use to get rid of the weeds In the heat of summer that wont kill the grass?
One roll of mechanics wire or tie wire can be had for the price of a pack of zip ties. Tie wire makes good hose clamps that last longer than Chinese zip tie plastic. Another tip if your using bulk pipe as your union fitting is to use a tubing cutter to score some lines where your clamps are going to be. The score lines act as an ad hoc barb fitting.
How do you repair a hose that has an internal rib to prevent water stoppage in event of a kink. I've tried to splice these hoses and they always seem to leak due to the internal rib. I have even tried to trim the inside of the hose but can't get a seal
@@maddog3080 thanks! That was the only other solution I saw people using was trim the rib out. Cross fingers on added silicone. If I didn't have this stuff lying around I would just throw my hands up and go by a new one but at this point it's almost like a challenge. It's the last leak! I will not be defeated by a stupid hose!
I was on the farm once about 1 mile out from the barn. I was dropped off and always walked the watering trough routes back to the barn. The hose broke and all I had there was a drill bit and a clamp. The water was completely empty so I found a stick and whittled a hole in it and twisted and stuffed it inside. Out the one clamp I had and it worked so well it stayed like that for 3 months until I winter came I fixed it. I think it could have went three more months lol.
I have a hose that I need to replace the male and female in. However, the inside of the hose has a rubber reinforced ribbing. I cannot seem to get one of the hose repair pieces into the rubber. I’ve tried to soak in hot water, I’ve tried using soap, and I just can’t get it to go past the rubber ribs. Any suggestions what I can use? It appears I need something that smooth that will go in there that will attach to a male and female repair end.
Instead of the worm-drive clamps I prefer the wire hose clamps. You can buy a Clamp-Tite tool or there are many DIY approaches for similar results. Especially on an inline splice the wire clamp does not have huge bulges to catch on things.
@@exnyer72 yes. I use worm clamps on the main line (under pressure all the time) and usually double clamp. For the zone lines I prefer pinch (oetiker) clamps.
Do these clamp kits come in 5/8" for thicker hoses? I got a 100' ft. Red like water hose at home deepot and I want to cut it in half to make 2 hoses 50' ft. Long
Well for starters don't destroy your hoses and take good care of them if you happen to destroy your hoses make sure you cut them evenly so that way they will still evenly if you make a gap or if you're off a little the hose will not seal correctly and it will leak and it will not give you the best pressure for whatever you're using it for wanting your yard doing water plants and Mixing concrete or using it for the pressure washer if you're going to buy a hose and you like one buy a extra one is a spare one so that way you can fix the host proper when you have the proper time to do it but you can get back on the job easy
A temporary solution is if you have a older damaged hose I always keep them around as you never know if you can use it as a siphon hose, or something else. Like cutting a section of the hose then slicing it half place the half over the leaking section of the new hose guerilla tape it to the hose and had no more leak.
Hi, I have an expensive Amazon hose in the end popped off, male. I put the very same end back in and put an o-ring on in a matter of minutes it popped off again. What do you suggest? Also, are there different sizes to these Hardware like 5/8, 3/4, like that? Thank you very much I really appreciate your video!
This is an application where they don't help. You wont see temperature changes here and the sharp edged clamp would rive you crazy on the ground. But in the car, boats, coolant lines they are the the best
Replace the male end of my hose. Clamp it down very tight. I leave the water on with the spray head. Over a few days, the replaced male end kept popping off, any solution?
I recently found your channel , and every video I have watched was excellent. But I am not a handy guy and still have not understood where the name Silver Cymbal come from. Can someone tell me?
Thanks for watching please LIKE & SUBSCRIBE - Repair Kit (inline): amzn.to/3wjvhC3 MALE end: amzn.to/3vpynmU -FEMALE end: amzn.to/3cD7yEY - Repair Kit Clamp Style (Lowest price): amzn.to/3vkSKRQ -Fiskars Cutters: amzn.to/3cARtQa
I guess you have succeeded in being able to use the hose again,BUT you lost A LOT of hose in the process,I guess it is what it is, IF you want to continue to use the old damaged hose/you don't want to replace it/buy a new one, I guess you could add links, from another hose/IF you can buy just the hose or salvage pieces from another hose.
Hello my friend 🖐️
Thanks for the great advice and how to video Silver Cymbal.
Do they make male end hose repair couplings for 1/2 inch hoses? Can't seem to find one.
I prefer using the quick connects to the house, hose(for a sprayer) & the garage utility sink. (Which has hot water. Great for washing the truck in winter)
The ends are the worst! Nice to know they have male and female repair kits. Thanks for sharing!!
They do but Male are always gone. Hmmm
Great video I just ran over a hose with a mower and was thinking about how to fix it.
Thank you. I've been dealing with a leaky hose for a couple of years. I tried flex seal. I tried flex seal tape. Neither worked. I didn't know a product like the female end you showed existed, but I recognized it from a hose my family owned when I was a kid. Thanks to this video, I was able to fix my hose for $7!
I've used the crimp on style, the hose clamp and the upgraded clamping style shown in the video. But my personal favorite is one made by Melnor that's all metal and has a compression nut, style 9003 & 9002. They are very low profile and don't interfere with hose reels and can't get caught on anything. Repaired 2 hoses that had bad connectors from the factory with these 20 years ago and they are still working great.
Interesting. I haven't seen those Melnor fittings at the local Homeless Despot.
Thanks for including the Melnor part numbers.
I recommend using a heat gun after you finish attaching the clamps and heat the rubber ends to shrink them a little bit around the brass fittings. From my experience it helps secure the fitting especially under pressure in a pressure washer.
Ahmad: great tip.
Thank you 👍
The channel didn't know lol
Yep, thanks for that tip... I knew there had to be another way....mine won't hold any pressure...the second I turn it off at the sprinkler it blows out at the faucet. Thanks again
@@Rexag Did it work though?
@@julieshin yep … worked!!!!
Thumbs up just for running the hose over with the mower. Dedication. And, thanks for the tips.
I've repaired several hoses over the years and only buy the premium hoses as they don't kink anywhere near as easy as a cheap hoses. They also tend to last the longest as well. I have also cut down longer hoses to make the exact size I need. I've used and liked the Gilmour Aluminum "sandwiched" type like you show and while the work great they are a bit bulky. I have been using the Orbit Brass hose menders and while they are a pain to install on thicker preminum hoses they look like a factory connection and don't hang up or get caught while dragging the hose around. Look for model numbers 56801N/56802N/56803N.
I'm actually jealous that you put these repair ends on a video. 🤣 I've used these, religiously, and never gave them a second thought. 100% cure! Lowe's garden center every time! Thank you and God bless! 😁👍
You should try European style hose ends and accessories... No fuss screwing, zip tying or anything.
*laughs in GARDENA*
Absolutely! In Australia the older style brass hose fittings are almost non-existent anymore. Majority of fittings are the European style and makes things so easy.
Do you have a link for one my any chance?
In the UK we have universal plastic hosepipe connectors that are really reliable and just screw together. I'd recommend looking into it
We have them in the US. Look up "universal hose fittings."
Hi!!! I hope you see this message because I’m a big fan (and subscriber) of yours. Your video on edging the lawn is fantastic and my yard looks great. So now I have to repair a hose and now I know make sure I buy the “clamp “ that you screw on (no sharp edges). 🌸
Great video! I don’t think you mentioned that hoses come in a couple different diameters, so you want to make sure you get the correct diameter fittings for your size hose. I learned that the hard way 😉 Thanks for the information!
What is usually the standard size is it ¾?
@@exnyer72 I guess it’s a matter of preference. I have always had great water pressure where I live. So I choose 3/4” for maximum delivery of water.
Pro tip: Don't use 5/8" hose. You wouldn't think that an additional 1/8" would make much difference, but it does. 3/4" hoses flow SO much better, especially on longer length hoses. On a 100ft hose, expect ~65% more flow. Especially if your plumbing infrastructure is beefy, 3/4" hose will make a hand sprayer or a garden sprinkler feel twice as strong.
Actually That depends on what you are looking to achieve. A smaller hose will actually give you more overall velocity. A smaller hose will have more resistance than a larger hose. You will see a 4 psi drop per 100 feet on a 5/8in hose vs a 2 psi drop on a 3/4. So if you want more velocity go 5/8. If you want more over all water flow volume...go 3/4.
@@skypallman6169 Wild. I am curious about the physics of that, but in practical terms, flow is everything. If I place a nozzle at the end of both hose diameters, the 3/4” hose sprays further. I work with hose a lot, lol
@@toddshreve With a smaller hose the water travels through it faster so you'll get more pressure output from it.
@@skypallman6169 if you didnt have a fitting at the end, that would be true. but having a nozzle (or your finger lol) at the end, a 3/4" hose will give you more velocity due to the higher head pressure at the nozzle.
0:03 I literally just ran my nice hose over the other day 😩 you’re timing is impeccable with this video 😆😆😝
I’ve used these hose connections and they are excellent! Thanks for sharing!
Great idea and also Quick connectors would work perfect for the ends dont have to spin the entire hose to connect to the water spout.
Hello my friend 🤝
That's how I set up multiple sprinklers with one hose also. Cut to desired length and use those good male/female fittings add a quick connector to the sprinkler also. Makes it a lot easier to water lawn if you don't have an irrigation system.
Silver Cymbal - truly dedicated - out there destroying hoses just to show us how to fix them 😁😂
You beat me to it! :)
🤣🤣
The copper tube insert is a great idea!!!
Always great content. Just had to do this after my winterized hose must have contained some water.
Didn't know they made repair kits that had a double barbed connector. I bought a male and female connector and screwed them together. Learned something new today, which is why I subscribe and get notifications for each video
I appreciate that a lot, glad you liked it
If your water hose got a hole in it just used tape
If your water hose got a hole in it just used tape
Great video!
Fixing two hoses at the same time. They’re the orange Home Depot hoses and they’re 25+ years old! Best hoses I’ve ever had!
I use a 3/4" hose fitting, secured with a upinor pex ring, using a upinor pex expansion tool to expand the hose/expansion ring, then quickly slip onto the new fitting, it's awesome 👌
Man, I really liked & appreciated this video. Thank you many. So good
Here in Australia we have clip on attachments. Way easier than what you guys have to deal with by the look of it
I love all your videos!
Thank you! In these times with all the inflation videos like this help us A LOT!
I just used an electric tape and I couldn’t believe it worked! Used a $1 item to fix a $30 dollar garden hose!!! My wife thought I was crazy. I thought I was crazy. It worked!! Lol
Here in the EU it's normal to have special garden hose quick disconnects, does that kind excist in the US? I always see these threads and look really annoying to use
New Hampshire here. We've had quick-connects in my family as long as I can remember. We also lived in Galway Ireland when I was a kid. Maybe we stole the idea there. I agree. Threaded hose connections look awful. I had no idea they existed!
The threaded connections are nice because they are low cost and full flow. I have used the quick connects before but they were very restrictive.
@@geoffmooregm i never had a issue with them
@@geoffmooregm Never had issues with quick disconnects before. Other than plastic ones being damaged easy.
Brass, Copper, or other metals are way better, and quick disconnects are nice.
A thread wouldn't bother me to much, since I barely take stuff off.
@@autumn5592 I am not saying they don't work. I am saying they reduce flow. I have 3/4" plumbing from my main to the hose bib as well as a 3/4" hose. I am not going to put a quick connect on that when it chokes it down to 1/4"
At 2 Am I am watching this.. I don't have a hose, I don't even have a Garden... Still I watched the Complete video. 🤔
Thanks! Very fast, clear instructions!! PERFECT!!!
Watching this kind of video is very relaxing
The last part you made it easy n cheap for me, thanks for posting
Well, I have an upgrade project to do. Looks like a satisfying one as well.
Just a little FYI kinda warning. Those #1 and #4 heat up on the sun and overtime burst the hose right at this end (if there's water pressure all the time). My hose might be old but just FYI.
Already happened 3 times to me over 2 summers
I'm not sure it's the heat. I had one in a shady spot blow off. I cut a clean end on the hose and use a worm gear clamp instead of the plastic one. So far no problems with the worm clamp mod.
@@hughbrackett343
Good to know. Thanks.
After using mine, I wrap it up in the shed👍👍👍
Thank you so much for a quick, but right on video.
The beginning of the video looks like a Billy Mays or Phil Swift commercial! It just needs the zoom in to black and white with the no symbol superimposed.
"Oh-no! Not again! Has this ever happened to you? Are you tired of purposefully running over your garden hose with a lawn mower? Do you want to save hundreds of dollars a year? Silver Cymbal has the fix for you!"
Really appreciate this video. Thank you.
High tech mate! Keep going 💪🏻
Good Tip to get these on easier, heat them up a bit and use some food safe grease :)
Thanks I was having trouble getting the metal part inside an old stiff hose
Do most people have copper pipe lying around? 😉 I appreciate this video. It's informative and now I have an idea what to do. Thanks
I love this guy!
Very good Video 📹 thanks for sharing 👍
Awesome tip! Saved me some money 💰 thank you!!!
The first method involving hose clamps works the best. The repair kits are 'ok' but IMHO don't hold as firmly as the ring clamps. Lastly: estate sales and thrift shops often sell perfectly great used hoses for really cheap. I recently purchased a nice one for $5... not much different than a repair kit.
Not sure how many people just run over their water hose with a lawn mower, but it would be cheaper and less time consuming to move it. I'll give you a thumbs up for the tutorial so you know I'm not hatin on ya.
You didn't grow up with a brother like mine, or have kids. 🤣
I like the permanent wire type clamps. Once you have the tool you just need bailing wire. It's permanent and sits flush with the hose. If you want you can use electrical tape or heat shrink to cover it.
Apollo PEX rings are the best I never had an issue with one and they are very cheap
Great video
After repairing several hoses in the past, I've found the best course of action is to just throw it away and go buy a new one.
I used to feel the same, try one of the clamp kits sometime they are very good. I have a 200' hose by combining a 150 and 50 using them, be in place for a long time without issues.
i had that way of thinking too actually, but i just tried the inline clamp today from Lowes and its definitely better than using the normal clamp styles.
Old hoses still have uses if they arent totally messed up though.. ended up fitting a previously used one into the bottom of a bucket a few weeks ago to catch leaking water from exit pluming when water is being used which was making the crawl space a little wet. And Boom, when the water gets high enough in the bucket the hose drains it to the sump pump so no more wet crawl space :)
Hello, can you use some type of sealant on the male connector portion that you insert it inside the hose and tighten the clamp down?
Thanks for the tip, I'll run to home depot and grab me a pair of those shears , I'm sure they're probably near the garden hose section
Hi, Thank you, how about if your hose gets creases that hinder and stop the water flow at times.What I mean ot gets bent and stays bent. Thank you
Wish the guy at the store would’ve mentioned that type of clip. I hate the wire clamps because they do get caught on everything and they’re not very comfortable when they scrape against your hand or leg.
But I do like the idea of inserting a piece of pipe PVC cop whatever is available inside the hose and then using the zip ties. I like that idea best.
Thanks. Just had a really hard time installing a Melnor kit. I'll try the sort you show. HD is asking ****$2**** for ONE hose clamp-- and you need two per joint! Not happy with them!
Great info. I subscribed.
I first want to say I love your videos. Very informative. Thank you. My question is... I have fescue/bermuda however I have lots of weeds in my grass. The problem I have is I live in California central valley and it is already above 90 degrees... Is there a product I can use to get rid of the weeds In the heat of summer that wont kill the grass?
One roll of mechanics wire or tie wire can be had for the price of a pack of zip ties. Tie wire makes good hose clamps that last longer than Chinese zip tie plastic. Another tip if your using bulk pipe as your union fitting is to use a tubing cutter to score some lines where your clamps are going to be. The score lines act as an ad hoc barb fitting.
How do you repair a hose that has an internal rib to prevent water stoppage in event of a kink. I've tried to splice these hoses and they always seem to leak due to the internal rib. I have even tried to trim the inside of the hose but can't get a seal
Same issue - did you ever find a solution?
@@cherigriffith724 no, never did. Might try to use silicone on the barbed fitting after trimming the inside of the hose
@@maddog3080 thanks! That was the only other solution I saw people using was trim the rib out. Cross fingers on added silicone. If I didn't have this stuff lying around I would just throw my hands up and go by a new one but at this point it's almost like a challenge. It's the last leak! I will not be defeated by a stupid hose!
Thank you ! Just what i needed
thanks, your tutorials make me certified dad now 😅
This was a helpful video!
Love your videos, really helping me transform the property!
Well- even I could do that! I’ve been putting the leaky part in drier lawn spots and trying to stay out of the spray. 😬
😂 if it works, it works!
So true! That's exactly what I did...until I learned to repair it today.
I’ve been thinking of trying the barbed fitting but secured with epoxy glue.
I was on the farm once about 1 mile out from the barn. I was dropped off and always walked the watering trough routes back to the barn. The hose broke and all I had there was a drill bit and a clamp. The water was completely empty so I found a stick and whittled a hole in it and twisted and stuffed it inside. Out the one clamp I had and it worked so well it stayed like that for 3 months until I winter came I fixed it. I think it could have went three more months lol.
Thank you so very much ❤️
I have a hose that I need to replace the male and female in. However, the inside of the hose has a rubber reinforced ribbing. I cannot seem to get one of the hose repair pieces into the rubber. I’ve tried to soak in hot water, I’ve tried using soap, and I just can’t get it to go past the rubber ribs. Any suggestions what I can use? It appears I need something that smooth that will go in there that will attach to a male and female repair end.
Still the homeowners #1 hero.
Instead of the worm-drive clamps I prefer the wire hose clamps. You can buy a Clamp-Tite tool or there are many DIY approaches for similar results. Especially on an inline splice the wire clamp does not have huge bulges to catch on things.
The Worm Drive clamps are perfect for irrigation projects (underground), or for anything where there will not be any contact to cause damage.
@@exnyer72 yes. I use worm clamps on the main line (under pressure all the time) and usually double clamp. For the zone lines I prefer pinch (oetiker) clamps.
@@Sylvan_dB thank you for that bit of information. I will look into those!
Excellent tips!
Do these clamp kits come in 5/8" for thicker hoses? I got a 100' ft. Red like water hose at home deepot and I want to cut it in half to make 2 hoses 50' ft. Long
A tubing cutter is a good way to cut garden hose which gives a nice, clean, straight cut.
👌I never thought of that one🤔
I found crimp Pex fittings work just don’t crimp as hard. Brass fittings with copper band or pinch rings
Well for starters don't destroy your hoses and take good care of them if you happen to destroy your hoses make sure you cut them evenly so that way they will still evenly if you make a gap or if you're off a little the hose will not seal correctly and it will leak and it will not give you the best pressure for whatever you're using it for wanting your yard doing water plants and Mixing concrete or using it for the pressure washer if you're going to buy a hose and you like one buy a extra one is a spare one so that way you can fix the host proper when you have the proper time to do it but you can get back on the job easy
Thanks I have a really nice hose that has a kink in the middle. I'll cut it out and use one of those nice connectors.
Thats a great idea, sometimes sadly that happens.
In america you guys still use threads on the hoses? Here in NL (Europe) everyone got those quick connect fittings
A temporary solution is if you have a older damaged hose I always keep them around as you never know if you can use it as a siphon hose, or something else. Like cutting a section of the hose then slicing it half place the half over the leaking section of the new hose guerilla tape it to the hose and had no more leak.
Nice, I wonder if there's a way to clamp it to the end I already have..🤔
Can you scissors to cut the hose or do I have to buy shears to get better results
Yes, it worked! Thanks a lot!
Hi, I have an expensive Amazon hose in the end popped off, male. I put the very same end back in and put an o-ring on in a matter of minutes it popped off again. What do you suggest? Also, are there different sizes to these Hardware like 5/8, 3/4, like that? Thank you very much I really appreciate your video!
Very helpful. Thank you.
Thank you soooooo much
How much cost this brass connector ?
There are some cheap chinese all copper quick release fittings as well which are great and i tested them and has 0 leaks so far 😚
Have you ever tried to fix the Flex Hose? It’s not fixable. My dog has gone through two 50’ hoses.
Helped me out thanks!
What about those Auto clamps that you talked about that won't loosen with the heat? Can you find those at Lowe's or a big box store? For hoses?
This is an application where they don't help. You wont see temperature changes here and the sharp edged clamp would rive you crazy on the ground. But in the car, boats, coolant lines they are the the best
OmG! Thanks so much!!! Great save❤️
hadn't seen the upgraded fittings, always having issues with permanent kinks in the hose after awhile.
🤣🤣🤣 first 2 seconds of the video they show exactly what I did. Damn that lawn mower, I should’ve just rolled up the hose
Thank you so much 👍
Thanks for the info. I don’t have and copper or clamps lying around so home improvement store it is. 😢😅
Replace the male end of my hose. Clamp it down very tight. I leave the water on with the spray head. Over a few days, the replaced male end kept popping off, any solution?
The negative for that type is the whole hose needs to be turned to attach to the faucet..
What about the hoses that have a thick seam on the inside, so you can’t insert something round inside to fix it?
Good job thanks 👍
I recently found your channel , and every video I have watched was excellent.
But I am not a handy guy and still have not understood where the name Silver Cymbal come from.
Can someone tell me?