The Wilson grey grip module with the black slide and optic with custom trigger give the gun a premium vibe. It definitely looks like a finished product.
Nice man! Just picked up a p320 preowned with the wilson combat frame added and magazines. Still going back and forth between the original grip and the wilson combat grip. Seems I can catch the mag release a bit better with the wilson and I like the more aggressive grip. I'm considering an apex trigger, but I'm stubborn and want to be good with the original. Thanks for sharing, I enjoyed your video.
Crazy how your Black WC almost looks like a gray but in a great way. Also ive noticed something funny. The guys who have Tan original get the black and the guys who have black original get the tan. I had black got tan. Just an observation Ive noticed. I have the X Compact and the 15 round fit beautifully
On Timeline 4:47 you refereed to the frame on the left of the screen as a M-17 frame. Why does it not have the cut for the manual safety? What am I missing?
I have the same setup but in .40 s&w, my question is, I want a magazine to sit flush, which capacity magazine do I need? I own the 18 rnd magazine, but have a prominent signature from it. Thank you
@@rubingarcia7132 I put that recoil spring on my nephews p320. We did his the same way. I shot it a few times. I could not tell a difference. He is very pleased with it.
So the grip from WC is actually for the Sig p320 Carry because the 15 round maga can't fit. Hope Wilson Combat will produce a grip for the p320 Combat that can fit 15 r mags.
Very nice looking firearm.. I recently bought the RX Compact with the Romeo 1 and I was wondering if you have/will have a video showing how to properly zero the red dot in?
A bore sight will get you close to start with. If you dont have one you can start from a seated position using sand bags to steady your shots. Start at 15 feet from target. Fire 3 shots. Then adjust dot. Shoot 3 more then adjust dot. Once you center up move to 30 feet and repeat then move to 45 feet and repeat.
If I heard you right you have the M17 slide, does the Romeo Zero mount directly on the optics cutout? I have seen other sources say that the Romeo Zero uses the same mounting pattern as the Romeo 1 Pro / DPP used on the M17/M18 but would be very helpful to confirm it.
Did you say that this is with the 3.6" slide you are using on this grip module not the 3.9"??? I'm wanting a new grip module for my 3.6" but I haven't been able to find one
I have had it for years. I just pushed out the factory sight. The factory sights on a sig is really hard to push out so be prepared. I did a little filing on the bottom of the sight and it pushed into place. Really not hard. Judt slow work. You can always remove more steel you just cannot put it back once you file it off. Pretty sure this is a true glow sight. I prefer the fiber. Great in the sun light. And it picks up any ambient light around you at night.
@Jamie Effler no. I sold this to my buddy. And was gonna do another one for me. But they stopped making this color. So Joel is the only person I know with this color of grip today. I have not seen another one.
The WCP 320 Carry is my absolute dream gun. Maybe one day I can convince myself to spend $1,350.00 on it. Maybe by then it will be a little less than that.
Yes they have them for the X Compact. Look at the Wilson combat web site. Read care fully. I was a little confused as I searched for the one to fit my slide length.
I put in the armory craft trigger, along with their trigger return spring. It pulls at about 4.5, with a much more crisp overall movement. The reset is a lot more pronounced
Armory craft. But I sold this o e to my buddy. And now I cannot find the Grey color. I built me a new one. I don't know how to ask him for the Grey grip back.
I think Armory craft maybe thinks that the trigger is too light for everyday carry and could go off easily, if slightly touched. shooting yourself in the groin or wherever.
You will need to cut around half inch off the front of the grip. My buddy John cut his so it would fit the compact. It is easy to do. I cut an X5 grip in an earlier video that will show you how to do that.
@@sclegalcarry7979 That's great. Should I order the Wilson Combat Grip for the Full Size P320 or the Carry? Once I receive it, I want to ship it to you to cut it down if you are still doing that. Thanks -
Wilson Combat does make a grip module for the P320 XCompact. Bought one for my XCompact about 3 weeks ago for $64.95 on their website. Really improved my grip and accuracy.
@@sclegalcarry7979 Well that grip isn’t sold by Wilson Combat. It’s a Wilson Combat grip modified by Armory Craft. So you have to buy it from Armory Craft. Supposedly they did their own laser texturing. Can you notice a difference from a standard Wilson Combat Grip and the Armory Craft one for grip texture?
This is just a guess but a pretty educated one......the trijicon mro has a tendency to knock ejected brass back at the pistol which can cause an issue every now and then.
Why is this the best looking WC lower ever? None of them look that good. Did you get a special custom color way or something. It looks gray and black more than just black or just gray.
It was one of the first ones. My buddy wanted it. So I sold it to him. I thought I would build one like it. But I cannot get that color in the grip any longer. I wish I had it back. But he will not sell.
@@sclegalcarry7979 I was pretty decided on a P80 until I saw that color and definitely wanted it. Damn. Now the P80 feels like a settle. That lower just set me back to square one lmao.
The Wilson grey grip module with the black slide and optic with custom trigger give the gun a premium vibe. It definitely looks like a finished product.
Nice man! Just picked up a p320 preowned with the wilson combat frame added and magazines. Still going back and forth between the original grip and the wilson combat grip. Seems I can catch the mag release a bit better with the wilson and I like the more aggressive grip. I'm considering an apex trigger, but I'm stubborn and want to be good with the original. Thanks for sharing, I enjoyed your video.
I got the grayguns grip but I almost got this grip. I love Wilson Combat.
Crazy how your Black WC almost looks like a gray but in a great way. Also ive noticed something funny. The guys who have Tan original get the black and the guys who have black original get the tan. I had black got tan. Just an observation Ive noticed. I have the X Compact and the 15 round fit beautifully
Hahah ditto. I have the black in full size and just picked up the tan grip yesterday. Found this video looking for other possible upgrades to do.
It’s the gray with laser engraving from ArmoryCraft
great video and what a beautiful firearm
Very good video. Best I've seen on the WC
Thats one nice looking gun
So the P320 Compact module is the same length as the X Compact module
Wilson Combat is Awesome
I cannot find the gray/black grip module. Where exactly you order yours from.?
Armory Craft.
How did you get a gray grip with the black accents on the grip panels?
On Timeline 4:47 you refereed to the frame on the left of the screen as a M-17 frame. Why does it not have the cut for the manual safety? What am I missing?
Do they have a version for CA compliant M18 manual safety?
I have the same setup but in .40 s&w, my question is, I want a magazine to sit flush, which capacity magazine do I need? I own the 18 rnd magazine, but have a prominent signature from it. Thank you
I'd recommend a dpm systems recoil setup to finish that up.
I will look into that
Hows the recoil system feel?
@@rubingarcia7132 I put that recoil spring on my nephews p320. We did his the same way. I shot it a few times. I could not tell a difference. He is very pleased with it.
So the grip from WC is actually for the Sig p320 Carry because the 15 round maga can't fit. Hope Wilson Combat will produce a grip for the p320 Combat that can fit 15 r mags.
I'm confused on why the 15rd Mag doesn't fit
That sure is a pretty gun.
What size key on the streamlight did you use to attach to Wilson combat grip? Thanks great review
Very nice looking firearm.. I recently bought the RX Compact with the Romeo 1 and I was wondering if you have/will have a video showing how to properly zero the red dot in?
A bore sight will get you close to start with. If you dont have one you can start from a seated position using sand bags to steady your shots. Start at 15 feet from target. Fire 3 shots. Then adjust dot. Shoot 3 more then adjust dot. Once you center up move to 30 feet and repeat then move to 45 feet and repeat.
@@sclegalcarry7979 thank you!! I'll try the sandbags and let you know..
If I heard you right you have the M17 slide, does the Romeo Zero mount directly on the optics cutout? I have seen other sources say that the Romeo Zero uses the same mounting pattern as the Romeo 1 Pro / DPP used on the M17/M18 but would be very helpful to confirm it.
Will the M17 slide cut optic mount accept other optics? I know it accepts the leupold delta point pro, what about trijicon and holosun?
Nice review! So much info! Which front sight do you ended up using to fit Romeo Zero? Thanks!!
Did you say that this is with the 3.6" slide you are using on this grip module not the 3.9"??? I'm wanting a new grip module for my 3.6" but I haven't been able to find one
I just bought the WC grip for my X Compact 3.6” barrel. Just get the Wilson Combat grip for the X Compact.
You put a fiber optic front sight on that pistol?? How do you like it VS the stock and how easy was the install? Where did you get it?
I have had it for years. I just pushed out the factory sight. The factory sights on a sig is really hard to push out so be prepared. I did a little filing on the bottom of the sight and it pushed into place. Really not hard. Judt slow work. You can always remove more steel you just cannot put it back once you file it off. Pretty sure this is a true glow sight.
I prefer the fiber. Great in the sun light. And it picks up any ambient light around you at night.
What barrel are you running on that slide
Don't remember. My buddy got me to sell it to him. Wish I had not. They no longer get make that grip color.
Its cool and stands out key word stands out..unless your the head of a cartel or Patton.. I love it 😀
What's the brand of the mag sleeve you have on there?
What color grip module is that on there? The grey or the black?
Grey
So if I order the grey one is the grip it's self gonna be black and grey 2 tone like the one in the video?
@Jamie Effler no. I sold this to my buddy. And was gonna do another one for me. But they stopped making this color. So Joel is the only person I know with this color of grip today. I have not seen another one.
@@sclegalcarry7979 ok thanks for getting back to me man. And I've got one more question. Will the 21rd and 17rd magazines fit in my xcompact?
@Jamie Effler yes. The will stick out of the grip at the bottom. But they will work.
What base pad is that red one on the magazine??
Springer precision.
What light/laser is that ?
Which dovetail sight mount are you using?
Sorry I don't remember.
The WCP 320 Carry is my absolute dream gun. Maybe one day I can convince myself to spend $1,350.00 on it. Maybe by then it will be a little less than that.
Buy a 320 carry and get a WC grip module. Not quite the same as a full WC but it’s about $800 cheaper
Doesn't the X5 legion grip come with the tungsten inlays stock?
Will the apex trigger kit function properly in the wilson combat module?
Yes, the Apex trigger kit will work with the Wilson module
Is this available for 320xcompact? I just got one, and I'm a brand new shooter.
Yes they have them for the X Compact. Look at the Wilson combat web site. Read care fully. I was a little confused as I searched for the one to fit my slide length.
@@sclegalcarry7979 ok I think I found it, x-compact but they're out of stock...of course. But will it be OK with 10rd magazine?
where can I get the steel tungsten rods?
I got them from armory craft. They have triggers grips and the rods.
Would you recommend the armory craft trigger? To reduce trigger pull weight have you changed out any internal springs?
I put in the armory craft trigger, along with their trigger return spring. It pulls at about 4.5, with a much more crisp overall movement. The reset is a lot more pronounced
What color is your grip?
Where can I find this grip???
Armory craft. But I sold this o e to my buddy. And now I cannot find the Grey color. I built me a new one. I don't know how to ask him for the Grey grip back.
I believe I heard you say that the standard 15 round magazine on the Compact would not fit the Wilson Combat Grip. Is that correct?
Correct
Gen 1 mags wont work. The gen 2's will.
Wilson combat makes the compact grip also for the 15 round mag. I have these grips on all of my p320s . The best
I think Armory craft maybe thinks that the trigger is too light for everyday carry and could go off easily, if slightly touched. shooting yourself in the groin or wherever.
I like light triggers. It's what you want on your firearm. And yes to prevent litigation they do State not for Carry gun use.
You have really done a great job of modifying that P320. Will the Wilson Combat grip fit the P320 X-Compact? Thanks -
You will need to cut around half inch off the front of the grip. My buddy John cut his so it would fit the compact. It is easy to do. I cut an X5 grip in an earlier video that will show you how to do that.
ruclips.net/video/CQKq8hW_Fco/видео.html
@@sclegalcarry7979 That's great. Should I order the Wilson Combat Grip for the Full Size P320 or the Carry? Once I receive it, I want to ship it to you to cut it down if you are still doing that. Thanks -
Wilson Combat does make a grip module for the P320 XCompact. Bought one for my XCompact about 3 weeks ago for $64.95 on their website. Really improved my grip and accuracy.
Will the Wilson combat grip module fit on a regular Sig P320 compact 9mm?
Yes it will
Yes, but make sure you pick up some gen 2 mags.
Is that a custom color grip?
I cannot find the Grey grip anymore. I sold this to my friend. But I did not know I could not replace it.
@@sclegalcarry7979 Well that grip isn’t sold by Wilson Combat. It’s a Wilson Combat grip modified by Armory Craft. So you have to buy it from Armory Craft.
Supposedly they did their own laser texturing. Can you notice a difference from a standard Wilson Combat Grip and the Armory Craft one for grip texture?
@@sethrich5998 I don't notice a difference. All on mine are from Armory Craft. I wish they still had this Grey color. I would like another one.
@@sclegalcarry7979 They’re still listed on their website, just out of stock. The P365/XL ones are in stock.
Malfunction at 6:13? What was the issue?
This is just a guess but a pretty educated one......the trijicon mro has a tendency to knock ejected brass back at the pistol which can cause an issue every now and then.
Looks great, please get the models right, you don’t have a m17 or m18 anything
There is no manual safeties
Where did you purchase the red mag base plates?
Looks like killer innovations base +5
WHERE DID YOU GET THAT COLOR SCHEME FOR THE GRIP MODULE?
Wilson Combat makes the grip
@@sclegalcarry7979yes, but the paint job is from Armory Craft.
Nice, Gun apron...😮
Will it fit the compact nitron
I don't have that one. Check the Wilson Combat website
Is that a custom paint job on that grip module? It looks great.
Yes Wilson Combat created these custom for p320
What color is that WC frame?
Or what's it call?
🔥🔥🔥💪🏾
Why is this the best looking WC lower ever?
None of them look that good. Did you get a special custom color way or something. It looks gray and black more than just black or just gray.
It was one of the first ones. My buddy wanted it. So I sold it to him. I thought I would build one like it. But I cannot get that color in the grip any longer. I wish I had it back. But he will not sell.
@@sclegalcarry7979 I was pretty decided on a P80 until I saw that color and definitely wanted it. Damn. Now the P80 feels like a settle. That lower just set me back to square one lmao.
long reset :(
Does Wilson Combat no longer make them in gray?
That grey is killer, I would love a similar setup on my 365.....
Those grips were modified by Armory Craft.
Can you buy AC products for me and send them to Thailand?
Could you please answer me?
I like it and want it very much.