Gun owner for years.. just bought a P320.. i know how to clean guns... thought i'ld look at youtube anyway for suggestions... your Explanations are EXCELLENT! One of the best of tons i've looked at for all my firearms... One suggestion and only one improvement.. i wear latex gloves while cleaning..
Nice video. I do want to make a comment that might help some viewers. When installing the guide rod your comment sounded like it should be obvious which way to install it. Actually, it is a very common problem to install it backwards. In addition, Sig doesn't make it easy because there are at least three different guide rods. I have three in front of me. The guide rod for the full size has a single spring and on mine and yours the breech end has a rectangular dimple in it. Compact and subcompact guide rods have two springs. The end with the double spring is the muzzle end. In addition some guide rods have the round breech end cutaway to have two flats on it. If it has flats the should be vertical so the narrow profile matches the barrel extension. As always, the manual is the best source of information.
Thank you so much. I am looking to buy the Wilson Combat Sig P320. I wanted to make sure it was friendly to clean. I'm an 'ol tomboy and have used my hands a lot. I will be moving forward on my purchase.
Thank you very much for this video! I'm a beginner, and I got my very first gun a few days ago, a P320 M18. I'm so happy with it, thanks for your help!
Awesome video great instructor, great pace very great instruction as I disassembled, cleaned, and assembled within 1 hour, and everything worked as described!! 5 stars!!
Excellent video! I had trouble the 1st time at disassembly and especially at reassembly of my new P320 Equinox , this video was very helpful . As you stated, there are a few tricks that are helpful, many thanks!
Very helpful, thank you. My model is an X5 Legion, and the recoil spring isn't neatly packed on the rod like this one was. You have to (I assume) feed the loose spring end into the slide assembly and then compress it into place with the rod and then slip that into place against the barrel as shown in the video. Otherwise everything was the same.
Congrats! Got a 320 RXP XCompact - first pistol - last week. Completed Basic Handgun Skills course and put my first 100 rounds downrange today. So much nicer than the G19’s I’ve rented.
I saw that and fixed it. Then I came across your video and was glad I wasn't the only one who made this mistake at first. Thanks for the video brother.
Really helpful video, and I am a novice. Last time I took out the FCU, the safety lever pin just dropped out. Fortunately I saw it and slid it back in, although it still doesn't stay in place sometimes when I tip the FCU while outside of the grip module. Could anything have fallen out or gotten out of alignment in the seer housing while the pin was out? The gun dry fires fine but I have not taken it to the range yet. Thanks!
Thank you for the extremely helpful video. It beats the awful manual by a mile. Do you expect this to apply to all P320s in every aspect? Including the X5 legion?
Nice video. This is my 1st time cleaning my Sig and when I assemble it after cleaning the recoil spring guide sticks out a little after I put the slide on. What did I do wrong?
How tough should it be to push the patch through the barrel? I have 2.5” patches and I can’t push them through with the jag. It’s been awhile since I’ve cleaned my gun but it doesn’t have too many rounds through it
@@SkullCrushInc I’ll try that next. I use same patches on my Glock and have no issues, but on the sig I either have to force it or it just won’t even go
Cleaning my P320 for first time and saw that my Recoil Spring Guide is painted RED for 3/4 inch from top. Not sure what to do? Any advice? I bought the gun a week ago from local place.
stiff slide catch? came straight here after my first time shooting my new 320 with the txg frame. put about 300 rounds through the gun and when i got home i noticed that the slide catch was impossible to depress and the slingshot method was the only way to send the slide home. did i miss something or is this a common issue?
Hard to diagnose without seeing it in person. Call Sig customer service and send it back if needed. Your P320 should be perfect. If not, let Sig fix it.
@@SkullCrushInc after I wrote that I checked out your website and found them! Any future plans on making them light/laser compatible? I have a Sig xcarry 9mm with a tlr 8 that I'm looking around for a nice otw for. That belt loop design is genius! I see you are a veteran and LE owned company as well, do you offer a LE discount? Thank you!!
Gun owner for years.. just bought a P320.. i know how to clean guns... thought i'ld look at youtube anyway for suggestions... your Explanations are EXCELLENT! One of the best of tons i've looked at for all my firearms... One suggestion and only one improvement.. i wear latex gloves while cleaning..
Clear, concise, and straight to the point. Well done.
This is a model for how instructional videos should be done. Thank you.
That’s a great compliment Nick! Thank you.
Nice video. I do want to make a comment that might help some viewers. When installing the guide rod your comment sounded like it should be obvious which way to install it. Actually, it is a very common problem to install it backwards. In addition, Sig doesn't make it easy because there are at least three different guide rods. I have three in front of me. The guide rod for the full size has a single spring and on mine and yours the breech end has a rectangular dimple in it. Compact and subcompact guide rods have two springs. The end with the double spring is the muzzle end. In addition some guide rods have the round breech end cutaway to have two flats on it. If it has flats the should be vertical so the narrow profile matches the barrel extension. As always, the manual is the best source of information.
This is the best guide I've found on how to clean the p320. Thanks so much.
Bought mine yesterday and already shot 200 rounds through it
Appreciate it
Thank you so much. I am looking to buy the Wilson Combat Sig P320. I wanted to make sure it was friendly to clean. I'm an 'ol tomboy and have used my hands a lot. I will be moving forward on my purchase.
Thank you very much for this video!
I'm a beginner, and I got my very first gun a few days ago, a P320 M18.
I'm so happy with it, thanks for your help!
Thanks I didn't realize how easy it was to remove the fire control piece.
Thanks I'm glad you made this I just bought a p320 9mm for my first handgun now gotta learn to take care of it........
Just bought my first, also Great video
Did you guys clean/oil yours before breaking it in? Gettin mine Monday
Thanks for the video,
Just picked up a police trade in.
I just cleaned it &
Love ballistol.
Good day.
Maybe THE best cleaning video tutorial I've ever seen!
Thanks! Very helpful. My first clean before first shoot.
Very good video. Helped me clean my P320 for the first time with no issues. Thank you!!
Excellent. Very helpful. My first clean
Awesome video great instructor, great pace very great instruction as I disassembled, cleaned, and assembled within 1 hour, and everything worked as described!! 5 stars!!
Excellent video! I had trouble the 1st time at disassembly and especially at reassembly of my new P320 Equinox , this video was very helpful . As you stated, there are a few tricks that are helpful, many thanks!
Very helpful, thank you. My model is an X5 Legion, and the recoil spring isn't neatly packed on the rod like this one was. You have to (I assume) feed the loose spring end into the slide assembly and then compress it into place with the rod and then slip that into place against the barrel as shown in the video. Otherwise everything was the same.
Great job! Straight to the point, without all the testosterone-laden shit that plagues way too many firearm videos on RUclips.
good video💯gives every detail needed including how many pads you used n stuff like that, I haven’t seen alot of videos like this
The most professional, description video I've seen . Thank you
Very good video - well done - Just purchased a new Sig P320 X-Compact - Really like this pistol -
Thanks for the video man. Just got a 320 xfull rxp for my first pistol. Love it. Appreciate the info.
Congrats! Got a 320 RXP XCompact - first pistol - last week. Completed Basic Handgun Skills course and put my first 100 rounds downrange today. So much nicer than the G19’s I’ve rented.
Lucky timing as I can't find one now
I saw that and fixed it. Then I came across your video and was glad I wasn't the only one who made this mistake at first.
Thanks for the video brother.
Thanks Skull, you're crushing it!
Best video ive seen! Thank you! 13:03
BRAVO! Thank you for a CLEAR instructions!
Nice presentation. Well done!
Most detailed instructions I’ve seen. Thanks
Go checkout sig guy on the tube for all things SIG. You won’t be disappointed.
Very thorough and helpful video. Thank you sir.
This made the process so much easier than reading the owner's manual.
Glad it helped Chris. 👍
Much more through then the sig video. Great vid. 👍🏻
This was an excellent video I followed to a tee! Thank you
Thank you and you’re welcome!
Just added the Wilson combat grip on my M18 😁😏 best thing I've ever done & best gun I've ever owned period 💯💞 .
I agree. I feel the same way about the Wilson Combat grip.
Have you thought about changing the slide? Like maybe black wilson grip and like a stainless steel slide. I've been thinking about that
Great video! I just bought My first 320(x compact) which was fun to shoot. Not spot on, but I'll get it.
Great Video! Well done.
Excellent tutorial
Liked subscribed and commented just cus of the quality of this video great instructing thank you
Great instruction !! I enjoyed the way you took your time to explain & show everything step by step .. Thank You
Great tutorial!
Excellent video!
Great video, p320 will be my first hand gun I buy.
well detailled and good close ups well done thanks
Thank you sir.
Great video thanks for sharing
Amazing explanation. Thank you!
Thanks for watching Silvano.
Great video! Thank you!!
WOW, that was amazing! Thank You
Thank you!
Really helpful video, and I am a novice. Last time I took out the FCU, the safety lever pin just dropped out. Fortunately I saw it and slid it back in, although it still doesn't stay in place sometimes when I tip the FCU while outside of the grip module. Could anything have fallen out or gotten out of alignment in the seer housing while the pin was out? The gun dry fires fine but I have not taken it to the range yet. Thanks!
Well done! Thank you!
Excellent instructional video
nice job! thank you
Thank you for the extremely helpful video. It beats the awful manual by a mile. Do you expect this to apply to all P320s in every aspect? Including the X5 legion?
Yes, all the P320’s are basically the same.
@@SkullCrushInc thank you again. God bless man 🙌🏾
Thank you
14 minutes well spent. 👍
good guide, thanks
Good video. Thanks.
Thanks
Nice video. This is my 1st time cleaning my Sig and when I assemble it after cleaning the recoil spring guide sticks out a little after I put the slide on. What did I do wrong?
Something to do with the recoil spring. Try rotating it and re-instal.
Please tell us about the holster.
skullcrush.com
How tough should it be to push the patch through the barrel? I have 2.5” patches and I can’t push them through with the jag. It’s been awhile since I’ve cleaned my gun but it doesn’t have too many rounds through it
Should be snug but not difficult. Cut the corners off the patch to make it smaller.
@@SkullCrushInc I’ll try that next. I use same patches on my Glock and have no issues, but on the sig I either have to force it or it just won’t even go
what are your fingers made out of. im having so much trouble taking my gun apart
Cleaning my P320 for first time and saw that my Recoil Spring Guide is painted RED for 3/4 inch from top. Not sure what to do? Any advice? I bought the gun a week ago from local place.
Nothing wrong with your spring. The factory sometimes color codes the springs so they are easily identified in the assembly line.
I’m subscribing! 👍
Thank you sir.
the patches never come out clean out of the barrel. i used the metal brush several times, more than 10. and i used about 100 patches. any ideas why?
You can try a bore solvent first before the CLP but I think you’re okay. It doesn’t have to be perfect.
@@SkullCrushInc thank you
stiff slide catch? came straight here after my first time shooting my new 320 with the txg frame. put about 300 rounds through the gun and when i got home i noticed that the slide catch was impossible to depress and the slingshot method was the only way to send the slide home. did i miss something or is this a common issue?
Hard to diagnose without seeing it in person. Call Sig customer service and send it back if needed. Your P320 should be perfect. If not, let Sig fix it.
Where did you get the module grip?
Wilson Combat
So no oil on the fire control assembly?
Just clean with CLP. CLP will leave lube residual.
After how many rounds fired do u think it's okay to clean?
I only have 200 rounds through it so far
Clean after every use, regardless of rounds fired.
Thank you for making this video and not asking to subscribe to your channel lol. Jokes aside, great video and thank you for the time.
My disassembly lever is super tight.
Jiggle the recoil spring guid rod when the slide is locked back. Sometimes that helps.
@@SkullCrushInc Thanks I'll try that.
The nylon brush your using is just a toothbrush right?
@@reptileguy8458 Yes, I was waiting on a regular gun cleaning brush to come in at the time I filmed.
@@SkullCrushInc Why? Looks like the toothbrush works just as good.
X compact grip or wilson combat ?
AnthonyS This is a full size Wilson Combat grip. Wilson recently came out with an X-Compact version.
@@SkullCrushInc Im asking what would you suggest though? Comfortability wise.
AnthonyS Definitely the Wilson Combat.
What brand holster is that?
Tara Carter Skull Crush
@@SkullCrushInc after I wrote that I checked out your website and found them! Any future plans on making them light/laser compatible? I have a Sig xcarry 9mm with a tlr 8 that I'm looking around for a nice otw for. That belt loop design is genius! I see you are a veteran and LE owned company as well, do you offer a LE discount? Thank you!!
Tara Carter Sorry, but we don’t offer anything for that setup. Thanks
📺 SUBSCRIBE: youtube.com/@SkullCrushInc?sub_confirmation=1
What you’ll need:
Gun Cleaning Kit: amzn.to/4h2T3dl
CLP: amzn.to/488i96s
Bore Snake: amzn.to/3Nov8aL
Gun Cleaning Rags: amzn.to/3Nqdwep
Angled Gun Cleaning Swabs: amzn.to/3UbAnOF
Gun Cleaning Patches: amzn.to/3NrWEUy
Powder Free Nitrile Gloves: amzn.to/3NrFZRa
Gun Cleaning Mat: amzn.to/3U8c0kS
Skull Crush Holster: skullcrush.com/store-1-5xxzp/holsters-h79cy/p/iwb-holster
I don’t know what I did wrong but now I have no click when i pull the trigger and I followed this video to the T
Take it to your local gun shop and have them take a look.
@@SkullCrushInc will be going to tomorrow gun smith unfortunately not in today. Thank you
Thank dis is perfect for Cleaning my Gum thank
Nice job thanks to the point unlike Biden 😮😮😢
Thank you for the tip
very helpful thank you!
very helpful thanks