BakFlip MX4 Truck Bed Tonneau Cover Installation 2019 - 2020 GMC Sierra
HTML-код
- Опубликовано: 26 май 2020
- Hey guys, this is Bear from Bear’s Workshop. In this video we are going to install a BakFlip MX4 Tonneau cover on a 2019 GMC Sierra. Please hit the like and Subscribe buttons to see more. Thanks for watching.
BakFlip MX4
amzn.to/3gPGumC
Equipment used in the making of this video
Canon EOS 80D
amzn.to/32P4yOK ***
Camera Mount
amzn.to/2LYGhyV ***
Lighting
amzn.to/32KgNvO ***
Batteries
amzn.to/32LKzAc ***
Like, comment and SUBSCRIBE!
If you like tattoos and permanent makeup check out our sister channel ruclips.net/channel/UCXnB...
weed control lawn care quick start guide landscaping
#bakflip #bakflipmx4 #bakflipmx4review
BAK Industries
Tonneau Cover,Bed cover,Truck bed cover,BAK Industries,Pickup Truck,Truck bed,MX4,BakFlip,Hard Folding Truck Bed Cover,Hard Cover,How To,Cover Installation,Protect Truck Bed,Easy Install,black matte cover,off road,1500,2500,Ford,Chevy,tonneau,GMC,Toyota,Raptor,BAK,truck accessories,short bed,long bed,Dodge,F-150,F-250,SuperDuty,Truck Parts,Tundra,Ram,Colorado,Tacoma,GM,tonno cover 
Кино
I purchased the same cover, easy to install and it works perfectly, it looks sharp.
Nice 👍
Hi. I didn’t see the drain install in your video. Thanks for filming this. I’m getting ready to install mine.
This is great! I’m looking for one for my AT4, and you helped me make my decision! Great video! Subbed!
Awesome! Thank you!
Thank you very much. I installed this by myself step-by-step as you explained it and it turned out perfect. I appreciate you very much.
How’s yours holding up so far? I just ordered mine.
Nice job! I'm about to help my brother put his on his new truck. This was very helpful.
Great. Glad we could help!
Great job guys. Just bought one for my 2020 Chevy Silverado.
Good choice!
Great vid. I just opened the box for this cover I'll be putting on my 2020 Sierra AT4. Then I went to RUclips just to be sure there wasn't going to be any surprises during the install
Hope it helped!
@@BearsWorkshop easy peasy. I really liked the tip about cutting the middle of the sticky backing lol
Trick for the foam seal on the bed bulkhead with the bedliner, flip it over so the sticky side is attached to the tonneau cover.
Great video much appreciated
Very helpful sir. Thank you
Thanks for the help!
Excellent!
Very well explained 👍👍
Putting one on my 02 Silverado 1500, thanks
Gracias
BTW I ordered one of these for my new GMC Sierra Crew Cab, hope it gets here quickly!
Great video. Thanks. Plan on using the same model on my AT4
Thank you and thanks for watching!
Best way to get the hose down? Mines not really going in
I have putco bed rails already. Would this or any other tonneau cover work along with bed rails? I'm pretty sure where you have that drain is being used with bolts for the bed rails.
Hi. Thanks for the video. Did you trim the drain tube? My dealer installed this on my 2023 sierra and a lot of water inside. I check the drain tube and water gushed out when I pulled it off the rail. I pulled the tube out of the side wall hole and the put the entire tub in there. I am assuming it got kinked or turned up so I decided to cut the tube so only 1/2" to an 1" sticks through the hole. I need monitor next rain storm.
I try ro add rails but the tail gate hit. It also has factory rhino liner. Should I trim the rail?
I had this cover on a GMC 2016 3500. Really liked the cover except the plastic slides that the prop rods slide up to when fully open. Halfway to my trip to Florida with my motorcycle in the back the slides split from the wind pressure and eventually had to remove the whole cover and set it in the bed next to the motorcycle. The slides should be made of aluminum or some type of metal. Other than that I'm ordering this same cover for my 2020 GMC. Also mine had a rubber seal same as the sides that laid over the tailgate I believe. Ordering another one for my 2020 GMC AT4.
Good luck with the new one. Enjoy the AT4!
Does the handle in the bed flip up and still operate with this cover installed?
@@nickhead3093 If you are referring to the handle in the tailgate, yes it does.
I have one of these covers. Do you know if there is a truck rack available that can be used while the cover is down?
Thanks for the video. Very helpful. Any suggestions on alternatives to address the seal adhesion on the spray-on truck bed liner?
Probably use something else that is stickier. You can get foam with one side sticky from home depot.
I wiped my edges with alcohol wipes. Really helped stick.
There was a Q&A question/answer on the BAKFlip website. They suggested applying the seal to the cover (instead of to the bed) when there’s a spray on bed liner in place. I’m guessing this also applies to the CarbonPro bed.
What is the difference between the 2019 Chevrolet Silverado 6ft6 new body style and the old body style? When coming to the bakflip mx4?
I installed mine but for some reason my auto release of the tailgate on the same model truck, don't pop out. It won't open. What do you think is the problem?
Will the bed camera still work with this cover folded up? Thank you
CN you drive this thru a truck wash and keep your bed dry?
Hi friend I have the same truck I need to know what’s the bed measuring?
When the cover is folded up against the back window can you still see out of the rear view mirror camera? Thanks!
Doesn’t appear to block the light assembly
You have to drill?
is this with carbon bed?
Can you help me to do on my Chevy
I try to use your information
any leaks?
Does it still allow the grab bar handle to open all the way up? It didn't look like there was a problem mounting it, but did the handle still work fully?
Yes, everything is still completely functional.
I have a 2021 Chevy Silverado LTZ with the bed/rear view camera. When the cover is leaning against the cab, do you still have full visibility with the cameras?
I am pretty sure you do.
Did yall test the camera pointed down at the bed after install with the cover fliped all the way up? Looking at buying this one but need the camera for hooking up gooseneck. Thanks for the video!
?
It doesn't appear that you would be able to see the gooseneck through the camera in the 3rd brake light. I think the angle would prevent it from being seen but I haven't tested it.
@@BearsWorkshop Were you able to use the rear view mirror camera in the 3rd brake light to see while driving or does it flip up so high that blocks the camera completely?
@@davids5552 You can still use the camera above the 3rd brake light
Installed my cover today in full Texas heat. FYI, the aluminum cover gets crazy hot in the sun. Nice cover though
What about is it weather tight any leaks?
I would say that water would find it's way in. Probably around the corners.
I just installed one of those covers on and there’s no gap at the end of the tonneau cover. It actually grazes my trunk. I can’t even use my remote to automatically open the trunk it gets stuck. Does anybody have any idea why?
Would sliding/shifting the cover towards the bulkhead help?
How has the cover held up in the AZ heat any fading on the cover or issues with the seals? And any issues dealing with BakFlio to warranty?
Like your other videos I’ve seen excellent video 👍🏼🙌🏼
No problems at all. It has held up pretty well.
ToeNay cover? It I thought it was pronounced "TahNo" lol
What tie downs is he using in the truck bed. The ones that are in place of the rubber plugs
This is not my truck so I am not sure what he is using.
Looks like BULL RINGS?
Just opened the box to install on my truck. Didn't get very far because of very poor quality, including damaged rails, gaskets that pop out and bad machining in some of the hardware. Initiating a return with the vendor. Waiting on their response. Not impressed.
Stay away from bakflip.... leaks worse than others and quality is terrible
I have putco bed rails already. Would this or any other tonneau cover work along with bed rails? I'm pretty sure where you have that drain is being used with bolts for the bed rails.