I installed on my Jeep gladiator awesome product had the same thing on my 2016 Sierra GMC. A lot of things people don’t tell you is clean out the threads on the truck bed before installation has the factory paint gets in there and makes them almost impossible to thread with the cover in place. And at least for me on the jeep you have to install the bed light before you install the real as it will not slide on there because of tailgate dead post
Great video! I just got a 2020 GMC AT 4 and was in between the 1 piece undercover hard cover and this one. I had the under cover classic twice before and loved it but this time I’m going with this one.
Great content, thanks! When the cover is open, are you still able to use the folding assist handle in the bed of the truck or does it hit the installed rails?
I have a 2019 Denali 1500 and my tailgate hits when I close it. For now I used Popsicle sticks to shim the side mounting rail to give it the clearance it needs to open and shut smoothly. Anyone else have this issue?
You installed it wrong... on your specific sheet it shows the clamps on the last tooth not on the second tooth as you installed the clamps... Makes a big difference!
How did you get the rubber filler strips between the plastic cap and truck bed rail? I purchased the Undercover UltraFlex (thought I had ordered the ArmorFlex). Of course the rails are the same no matter what cover purchased. It's only 22 degrees F here, so maybe my problem is the plastic cap isn't pliable when I pull on it to create room between the plastic cap and truck bed rail to slide in the rubber filler strip.
Great video. Thx. Are these tarps frp fiberglass skin ? And if so how does it hold up over time. I had frp one and after several years it really started to show its age. Thx. JJ
when the cover is in the upward position, does it affect the camera system? I believe the MX4 clears it but it leans against the window. I'd rather have the armorflex with the hail damage durability but wondering about the camera
Thanks for the video. Are you still happy with the cover? I'm shopping for a cover for my new Ram. I had a BakFlip on my 2016 Ram and have been trying to decide if I wanted another BakFlip the ArmorFlex.
Thanks for sharing. How do you like it now? I've been thinking of which cover to get for my new truck. Check her out: ruclips.net/video/6fkS0nJAf-o/видео.html
I installed on my Jeep gladiator awesome product had the same thing on my 2016 Sierra GMC. A lot of things people don’t tell you is clean out the threads on the truck bed before installation has the factory paint gets in there and makes them almost impossible to thread with the cover in place. And at least for me on the jeep you have to install the bed light before you install the real as it will not slide on there because of tailgate dead post
Great video. Thank you for taking the time to make it for these new 2020 GMC HD trucks.
Great video! I just got a 2020 GMC AT 4 and was in between the 1 piece undercover hard cover and this one. I had the under cover classic twice before and loved it but this time I’m going with this one.
Good install video. Now that it's 2 years old, how has it been holding up?
It’s been amazing. No issues whatsoever.
What do you think of the cover after a year? I am between the one you got and the backflip f1. Thoughts? Thanks in advance.
Still holding up and so far the best cover I've ever owned. Looks great still.
I'm right there with you on the F1 or this Armorflex. I really don't see a big difference between the two of them.
Great content, thanks! When the cover is open, are you still able to use the folding assist handle in the bed of the truck or does it hit the installed rails?
Now that you have some time with the cover how has rain / water penetration been? I have one coming for my 21 Chevy HD
Does it drain to the ground, or is water getting trapped somewhere, possibly causing rust down the road?
Drains to ground
I have a 2019 Denali 1500 and my tailgate hits when I close it. For now I used Popsicle sticks to shim the side mounting rail to give it the clearance it needs to open and shut smoothly. Anyone else have this issue?
I just installed an Undercover Flex on my 2019 F150 Lariat today , nice easy job !
With the cover open, does it cover the bed camera? If hooking up a fifth wheel would you be able to see the hitch with the camera?
David Duncan yes it covers the bed camera and the rear view mirror camera as well
FROGMAN524 Thanks for the help
You installed it wrong... on your specific sheet it shows the clamps on the last tooth not on the second tooth as you installed the clamps... Makes a big difference!
How did you get the rubber filler strips between the plastic cap and truck bed rail? I purchased the Undercover UltraFlex (thought I had ordered the ArmorFlex). Of course the rails are the same no matter what cover purchased. It's only 22 degrees F here, so maybe my problem is the plastic cap isn't pliable when I pull on it to create room between the plastic cap and truck bed rail to slide in the rubber filler strip.
Great video. Thx. Are these tarps frp fiberglass skin ? And if so how does it hold up over time. I had frp one and after several years it really started to show its age. Thx. JJ
Do you still like the cover you purchased after a few years?
Love it
@@FROGMAN524 great to hear. Thanks for the video and the update.
Great video, still in favor of the cover??
Yes it the best cover I’ve ever owned and I’ve had a number of them.
Awesome. Thx for the quick reply!! Buying now
Is there still room to hook a fifth wheel or goose neck with the cover fully open n hatched down.
Install video with no showing of the work being performed.
when the cover is in the upward position, does it affect the camera system? I believe the MX4 clears it but it leans against the window. I'd rather have the armorflex with the hail damage durability but wondering about the camera
David Bellefeuille when this cover is up it blocks the camera that’s in the 3rd brake light
Thanks for the video. Are you still happy with the cover? I'm shopping for a cover for my new Ram. I had a BakFlip on my 2016 Ram and have been trying to decide if I wanted another BakFlip the ArmorFlex.
I’ve had a couple of bakflips and they are nowhere near the quality of this armorflex. Love this cover.
@@FROGMAN524 Thank you!
Thank you for the video greatly appreciated. Take care.
How is the cover is holding? Thanks 🙏
Looks new still. Best cover made IMO
Hi, is this 6’7’’ or 6’8’’ length?
6’9”
How much was the bed cover?
$1193.53 to my door
@@FROGMAN524 thanks
@@1notsop they are 15 percent off on Amazon right now. $930 after taxes.
what kind of watch are you wearing ?
Rolex Submariner
@@FROGMAN524 i thought it was a Sub .
Is it waterproof???
NO
Thanks for sharing. How do you like it now? I've been thinking of which cover to get for my new truck. Check her out: ruclips.net/video/6fkS0nJAf-o/видео.html