This is brilliant once you done the bumpers you should of sprayed it back in silver loving the video though helped me a lot dude thank you very much for all your rc content ❤❤
hey bud! just catching up on some of your previous videos. was wondering why you reamed out the body holes after painting when some others suggested to line up the body to the body posts to make sure correct alignment and ream them out before paint especially when it comes to aftermarket bodies that are out there and some bodies that are included in kits well..let's just say that it's hit and miss at times depending on the kit involved. cheers and stay excellent! i watched both of your videos on how to prep and paint so i'm waiting for better weather to paint my Fiat 131 kit. same one that you have since i can't paint inside due to allergies.
Hey pal, I don't really have a good reason as to why I'd ream out the body post holes afterwards. Sometimes if a body doesn't have protective overspray film on it, I'll ream the holes after paint. I was probably just feeling over-confident that day. One too many IPA's before filming, lol! Have fun with the Fiat! Did you get the special blue paint for it?
@@poorboysrc nope..didn't find it, but i'm doing a little something different with the paint sceme. just like everyone else does when box art doesn't go according to plan. cheers bud and thanks for replying! see you in the next one.
Very nice job, and thanks for the tips. I'm planning on doing a "Death Proof" theme paint job on my Kraken 5b. If I use Matt Black for paint, will the shinny outside take away the Matt Black look?
Oh man, that'll be sweet! Send me pics when it's ready! poorboysrcchristmas@gmail.com And yes, if you paint the inside of the lexan body, the black will appear shiny. You could paint the outside to achieve the matte look you're after, but that's only good until the first roll-over.
Another awesome tutorial! That paint job came out AMAZING! Question do you prefer silver backing over white? If you were to do a all red car wich backing would you use? Also does it matter if you make your body post holes before or after the paint job?
Thanks bro! Backing color will change for me, depending on the primary color. On a solid color (no pearl or flakes in it), I'll use white as a backing color. But if my primary color is very metallic, or high pearl, or really bright and needs more pop, then I might back it with silver. And for the body post holes, I prefer to drill them before I paint. I find it easier to line them up and make them perfect when the body is still clear. 👊🏼🍻
Thanks Manuel. This particular body is no longer available. You'll have to go to www.teambluegroove.com to get one now. www.mciracing.ca for your decal needs too!
Hahaha too funny! Dee-cals, lol! That makes me laugh. In BC we call them decals (deckle) and back in Ontario everyone called them dee-cals. Funny stuff! 🤣
Paint the red first (mask off the white areas), then when done with the red, remove the masking and spray the whole inner white. The white will make the red pop, just make sure you lay down several good coats of red, it's a pretty transparent colour, so many (light) coats are needed for coverage. 🍻
Total noob here......does the oil from your fingers contaminate the surface when applying the masking tape? Should I be recleaning the inside after masking and before paint? Thanks!
Good question! Yes, the oil from your fingers can affect adhesion, so if you've done a lot of masking, and touched the inside of the body a lot, I'd recommend wiping the inside down with a lint free cloth and some isopropyl alcohol. 👊🏼
This is by far the best RC paint tutorial on RUclips. My only question did you use 1 can of orange an one can of silver to back? This is the exact combo I've been looking to do. My body is almost exactly the same size.
Thanks so much for the wicked comment! 👊 You're right, I only needed one can of each. Those small cans can go a surprisingly far way! Good luck with your paint job and thanks for watching!
Quick question from a beginner to the hobby, would you paint a bumper in black FIRST before applying the rest of the main colour being 'white'? If I do black second I run the risk on over spraying into the main colour white?
Very good tutorial! Any idea what material a RedCat Gen7 Pro body would be made of? Polycarbonate? Or the other you mentioned? I’ve searched their website but can’t find any info on it. Thanks!
Glad it was helpful! Im 90% sure those Redcat bodies are made of Polycarbonate. I've never owned one, but looking at pics, they look to be pretty thin and inexpensive, consistent with polycarbonate. 🍻
Ive painted quite a few bodies never had issues with automotive paint ive once in a while if it took a really hard hit or bend might lose a little but nothing ever major I agree they probably are not as flexible because that's where i have had problems but usually there more damage than jus paint
Thank you sir for your realy good tips,you make the job so much easier,so many other guys go to far in depth,nice to see you just keep it nice and simple for us dumb asses 😀
Thanks for watching and commenting, Mario. I very never painted a body that big before, I would think two cans of your primary color would suffice for the majority of the job. Any second or third colors you add, just one can will be plenty. 👊
Hey Craig, decals should be here in a week or two. Shoot me an email at poorboysrc78@gmail.com with your address, and I'll get some sent over to you. 👊🏼
I found it at my local hobby shop, actually! I was lucky, there aren't many around. If you're in the market for one, check out team blue groove, they make great repro bodies. 👊
@@derekr1854 sweet, I'd love to see it when it's ready. Also digging your profile pic, is that a '94? I've got a '94 Firebird, jist had the motor and trans rebuilt, getting them installed this week.
@@derekr1854 eight on man, would love to see it! I'm going 383 stroker, N/A with a lumpy cam, tune and long tubes. I was thinking of making a video of it, if I do I'll let ya know and I'll post it on my personal YT channel. 👊
Thanks pal! Unfortunately I can't find it available anywhere at the moment. I bought it from my local hobby store, believe it or not! It's a bit of a rare gem these days. If you can't find one online, check TBG, I bet they sell them. 👊
The body was made by Parma, it's long since been discontinued although you might be able to fond inventory online. TBG (Team Blue Groove) sells reproduction bodies too! MCI Racong makes the window decals.
Tamiya masking tape for curves is the best. It comes in a variety of widths, all the way down to 1mm. Most hobby stores carry it, and if they don't have it, Amazon does. 🤙
I brought Tamiya AS-9 for my rc shell as It’s the colour I want. Then watched this and realised i need PS 🤦🏻♂️ Will the AS hold well if I put a coat of PS-55 clear on first and then I’m going to shoe goo the shell afterwards? Annoying as I’ve already brought the paint and I can’t find a a replacement khaki green in polycarbonate paint anywhere. I’d admit my rookie mistake and take the loss on the paint if I could find a decent Khaki colour
That's a typical mistake (we've all done it, myself included!) and you've got an interesting solution... Theoretically you're right, if you spray the PS clear first then the AS next, the AS should hold. I've never done this before, but in theory, I don't see why it wouldn't work. 👊
@@poorboysrc I’m going to risk it. I’m thinking 1/2 to 3/4 of a can of PS-55 , then apply AS-9, then remaining can of clear to sandwich the AS. Finally I’ll shoo goo anyway. It’s either try it or bin the AS paint and go for a completely different colour, which I don’t want to do.
@@htomid I think you'll be good to go! Just use thin coats so the paints don't fight eachother and you should be golden. The shoe goo will be an added touch that should ensure everything stays together.
Luckily that's never happened to me! I find as long as I hit the paint with the hair dryer (or plenty of hot sun) and use lots of thin coats im in the probkem-free zone! ...Or maybe I'm just really lucky!?!? Lol! Thanks for watching, friend! 🤙
8:57 if i can ill make a piece of tape that fits there to avoid using a blade or use the blade as light as possible on the body because a score like that will end up being a crack after a crash
Wait time really depends on the weather. Ideally, on a nice hot day painting outside in the sun I'd wait 5-10 minutes using VERY thin coats. I would not leave the masking tape a few days for fear of peeling the paint off. Next day is ideal! 🍻
This is brilliant once you done the bumpers you should of sprayed it back in silver loving the video though helped me a lot dude thank you very much for all your rc content ❤❤
Awesome, man. Glad the videos are informative and helpful! 👊🏼
Thanks for your time. I bought a Gen8 PACK and I am close to body and paint. This will be the first time ever for me.
Wicked, have fun with the build! 👊
I really liked the bronze colour before you peeled :)
I'm pretty sure Tamiya makes a bronze in their PS line... hmm... 🤔
@@poorboysrc :)
Nice looks nice I'm going to tryout some painting but I thought it would be hard but you make it look easy
It's not as hard as you might think, just take your time, use light coats and ensure your body is clean, clean, clean!
hey bud! just catching up on some of your previous videos. was wondering why you reamed out the body holes after painting when some others suggested to line up the body to the body posts to make sure correct alignment and ream them out before paint especially when it comes to aftermarket bodies that are out there and some bodies that are included in kits well..let's just say that it's hit and miss at times depending on the kit involved. cheers and stay excellent! i watched both of your videos on how to prep and paint so i'm waiting for better weather to paint my Fiat 131 kit. same one that you have since i can't paint inside due to allergies.
Hey pal, I don't really have a good reason as to why I'd ream out the body post holes afterwards. Sometimes if a body doesn't have protective overspray film on it, I'll ream the holes after paint.
I was probably just feeling over-confident that day. One too many IPA's before filming, lol!
Have fun with the Fiat! Did you get the special blue paint for it?
@@poorboysrc nope..didn't find it, but i'm doing a little something different with the paint sceme. just like everyone else does when box art doesn't go according to plan. cheers bud and thanks for replying! see you in the next one.
@@garykee1 you betcha pal, have a great weekend! 👍🏻
I wish I watched this video before painting my Konghead body. Thank You for all your valuable tips.
Oh no! We're there issues with the Konhead paint job?
Hope the video helped you out! 🤙
Very nice job, and thanks for the tips. I'm planning on doing a "Death Proof" theme paint job on my Kraken 5b. If I use Matt Black for paint, will the shinny outside take away the Matt Black look?
Oh man, that'll be sweet! Send me pics when it's ready! poorboysrcchristmas@gmail.com
And yes, if you paint the inside of the lexan body, the black will appear shiny. You could paint the outside to achieve the matte look you're after, but that's only good until the first roll-over.
Another awesome tutorial! That paint job came out AMAZING! Question do you prefer silver backing over white? If you were to do a all red car wich backing would you use? Also does it matter if you make your body post holes before or after the paint job?
Thanks bro! Backing color will change for me, depending on the primary color. On a solid color (no pearl or flakes in it), I'll use white as a backing color. But if my primary color is very metallic, or high pearl, or really bright and needs more pop, then I might back it with silver.
And for the body post holes, I prefer to drill them before I paint. I find it easier to line them up and make them perfect when the body is still clear. 👊🏼🍻
That reminds me of my dad‘s truck from late 80s early 90s
That's when these trucks were in their prime!
Hi. Excelent tutorial. But a litle question: where buy this car body?
Thanks Manuel. This particular body is no longer available. You'll have to go to www.teambluegroove.com to get one now.
www.mciracing.ca for your decal needs too!
The way you pronounced,decals. Made me a bit confused, then I burst out laughing.😂😂🤣🤪🤣🤣
Hahaha too funny! Dee-cals, lol! That makes me laugh. In BC we call them decals (deckle) and back in Ontario everyone called them dee-cals. Funny stuff! 🤣
Harley-Davidson edition Pumpkin.
Haha you got it! 😎
Planning to paint a 59 Impala red with white top on roof and trunk. In what order should I paint?…
Paint the red first (mask off the white areas), then when done with the red, remove the masking and spray the whole inner white. The white will make the red pop, just make sure you lay down several good coats of red, it's a pretty transparent colour, so many (light) coats are needed for coverage. 🍻
Question? Should I clean the in and out side of the body or just the inside?
Just the inside. The outside should come with a plastic film on it to protect it from overspray. Remove the film when done painting. 🍻
Total noob here......does the oil from your fingers contaminate the surface when applying the masking tape? Should I be recleaning the inside after masking and before paint? Thanks!
Good question! Yes, the oil from your fingers can affect adhesion, so if you've done a lot of masking, and touched the inside of the body a lot, I'd recommend wiping the inside down with a lint free cloth and some isopropyl alcohol. 👊🏼
@@poorboysrc thank you!
@@davidconaway2830 any time!
This is by far the best RC paint tutorial on RUclips. My only question did you use 1 can of orange an one can of silver to back? This is the exact combo I've been looking to do. My body is almost exactly the same size.
Thanks so much for the wicked comment! 👊
You're right, I only needed one can of each. Those small cans can go a surprisingly far way!
Good luck with your paint job and thanks for watching!
Quick question from a beginner to the hobby, would you paint a bumper in black FIRST before applying the rest of the main colour being 'white'? If I do black second I run the risk on over spraying into the main colour white?
Rule of thumb is to paint your dark colors first, I think that's especially important with a white main color. 👊
Very good tutorial! Any idea what material a RedCat Gen7 Pro body would be made of? Polycarbonate? Or the other you mentioned? I’ve searched their website but can’t find any info on it. Thanks!
Glad it was helpful! Im 90% sure those Redcat bodies are made of Polycarbonate. I've never owned one, but looking at pics, they look to be pretty thin and inexpensive, consistent with polycarbonate. 🍻
Great video! I probably missed it, but why did you go over the orange with silver?
The silver backing will make the orange pop considerably more than if it wasn't there. 🍻
Awesome paint job!! Orange looks great:)
Thanks buddy! Now it's your turn to get one! 😆😆😆
Ive painted quite a few bodies never had issues with automotive paint ive once in a while if it took a really hard hit or bend might lose a little but nothing ever major I agree they probably are not as flexible because that's where i have had problems but usually there more damage than jus paint
Yeah it seems to work pretty good, lots of cour options too!
Thank you sir for your realy good tips,you make the job so much easier,so many other guys go to far in depth,nice to see you just keep it nice and simple for us dumb asses 😀
Haha, too funny! Glad you like the video, hopefully it helped you with your paint job! 🤙
Excellent series of videos! How many spray cans do you suggest to paint an X-Maxx body. The Jeep Gladiator Rubicon to be exact.
Thanks for watching and commenting, Mario. I very never painted a body that big before, I would think two cans of your primary color would suffice for the majority of the job. Any second or third colors you add, just one can will be plenty. 👊
@@poorboysrc Thanks for the quick reply! I’ll get two to be safe. 👊🏽
@@MarioSilva-zv9yv any time! Have fun painting! 🤙
U get your decals yet
Hey Craig, decals should be here in a week or two. Shoot me an email at poorboysrc78@gmail.com with your address, and I'll get some sent over to you. 👊🏼
Where do u get that body from just recently purchased a lunchbox body
I found it at my local hobby shop, actually! I was lucky, there aren't many around. If you're in the market for one, check out team blue groove, they make great repro bodies. 👊
I got a lunchbox body on the way
@@craigknauss9250 good stuff man! Enjoy! 👊
Very nice. I'm gonna paint a 1979 chevy PS-92 orange
Nice, you're going to love the colour! 👊
@@poorboysrc I'll probably do a video on the build
@@derekr1854 sweet, I'd love to see it when it's ready. Also digging your profile pic, is that a '94? I've got a '94 Firebird, jist had the motor and trans rebuilt, getting them installed this week.
@@poorboysrc 1998 Z28 camaro. I'm gonna try to make a video on building my car. I have a forged 408 waiting to get put in and turbo.
@@derekr1854 eight on man, would love to see it! I'm going 383 stroker, N/A with a lumpy cam, tune and long tubes. I was thinking of making a video of it, if I do I'll let ya know and I'll post it on my personal YT channel. 👊
Awesome job! do you have a link to that body? I need it!
Thanks pal! Unfortunately I can't find it available anywhere at the moment. I bought it from my local hobby store, believe it or not! It's a bit of a rare gem these days. If you can't find one online, check TBG, I bet they sell them. 👊
@@poorboysrc Ok, thanks, sure is awesome!
How do you choose a color to brighten the other or is it always that color silver???
Generally speaking, silver and white work well to back a color with to give it more pop! 🍻
I see you are using the tamiya tape but what size is the automotive tape you used nice paint job buddy
Pretty sure it was 1/2" standard automotive tape. It's been a while, my memory isn't what it once was, lol! Thanks for watching!👊
Who makes the window tape? I think I heard you say Parmour?? Where can they be purchased(both answers might be the same).
The body was made by Parma, it's long since been discontinued although you might be able to fond inventory online. TBG (Team Blue Groove) sells reproduction bodies too! MCI Racong makes the window decals.
私は日本人です。そのフォードｆ１００のボディーはどこのメーカーのものですか？。すごくしりたいです。
Tamiya made the original, but this one was from Parma (now discontinued).
@@poorboysrc ありがとう。
Good informative video. Subbed. What tape do you recommend for doing curves?
Tamiya masking tape for curves is the best. It comes in a variety of widths, all the way down to 1mm. Most hobby stores carry it, and if they don't have it, Amazon does. 🤙
@@poorboysrc that's great. Thanks for the response.
@@MeeeemeLord any time pal, thanks for the sub! 👊🤙
I brought Tamiya AS-9 for my rc shell as It’s the colour I want. Then watched this and realised i need PS 🤦🏻♂️
Will the AS hold well if I put a coat of PS-55 clear on first and then I’m going to shoe goo the shell afterwards?
Annoying as I’ve already brought the paint and I can’t find a a replacement khaki green in polycarbonate paint anywhere. I’d admit my rookie mistake and take the loss on the paint if I could find a decent Khaki colour
That's a typical mistake (we've all done it, myself included!) and you've got an interesting solution... Theoretically you're right, if you spray the PS clear first then the AS next, the AS should hold. I've never done this before, but in theory, I don't see why it wouldn't work. 👊
@@poorboysrc I’m going to risk it. I’m thinking 1/2 to 3/4 of a can of PS-55 , then apply AS-9, then remaining can of clear to sandwich the AS. Finally I’ll shoo goo anyway.
It’s either try it or bin the AS paint and go for a completely different colour, which I don’t want to do.
@@htomid I think you'll be good to go! Just use thin coats so the paints don't fight eachother and you should be golden. The shoe goo will be an added touch that should ensure everything stays together.
@@poorboysrc thanks for your reply and advise. Fingers crossed it holds up.
@@htomid any time pal, let me know how it goes!
Backing a colour is great. Sometimes I have had issues of the two colours reacting though which can be sole destroying. Have you ever had that happen?
Luckily that's never happened to me! I find as long as I hit the paint with the hair dryer (or plenty of hot sun) and use lots of thin coats im in the probkem-free zone! ...Or maybe I'm just really lucky!?!? Lol!
Thanks for watching, friend! 🤙
@@poorboysrc you definitely choose the right colours for this Pumpkin. HNY to you and yours. Look forward to more videos.
@@DustyFingersRC thanks DustyFingers! All the best, bro!
8:57 if i can ill make a piece of tape that fits there to avoid using a blade or use the blade as light as possible on the body because a score like that will end up being a crack after a crash
You got it!
If I want to do black colour on the bed I need to cover it with tape?
Yes, always mask off the rest of the car when you're painting the bed.
HOW Long do you wait between coats....will tape come off it left on for a few days
Wait time really depends on the weather. Ideally, on a nice hot day painting outside in the sun I'd wait 5-10 minutes using VERY thin coats.
I would not leave the masking tape a few days for fear of peeling the paint off. Next day is ideal! 🍻
@@poorboysrc THank you first paint job anyother hints....just wash with soap and water
@@johnseiler6884 just watch the video pal, all my best tips are in there! Wash, wash, wash again!!!
Bonjour, belle couleur, c'est tamiya PS61 ? Merci
Bonjour, oui c'est PS61.
(Je ne parle francais bon) 🤣
Thank you, very nice color, great video 👍
it is better to support with money or with white? What a difference ?
@@rcscalecrawler38 j'ai soutenu avec ps 12 pour maximiser les métaux et faire ressortir l'orange
I want to paint my body in orange with the white roof, can I support with white?
i need a body for my super champ
Check out Team Blue Groove!
What color orange?
I don't recall off the top of my head, but it's mentioned in the video, just scroll back through and you'll see. 👊