I have a 2104 so I would never need to swap anything but your videos are awesome!!!! Edit: I'd swap the black platinum seats for the KR seats all day long, that leather is beautiful!
Definitely a pats problem with the no start. Theft light blinking like crazy. I'm sure Zach knows the fix and just didn't see the light blinking. Then again with the swap it may blink and the pats system is still communicating I'm sure he will figure it out. Thanks again for all the videos! Gonna be sending you a few things for two swaps I'm doing. Talk soon.
I mean if you watch the whole video at the end he says that theft light was always blinking, but it still started. He changed the cables and it fired up with the light blinking.... So the PATS system must be fucked..m I know low voltage can mess with it, but even with new cables and everything it still blinked... Definitely not normal
Hey Zachary, you do some awesome work I just got a 2006 F350 Dually but I would love to do a swap of the interior if there’s anyway that we could get in communication together to speak over the process or the project. I’ll be awesome. I look forward to hearing from you .
If you'd watch the whole video it did start after he changed the cables, and the theft light was STILL blinking.... He even said it blinked before but still started lmao
I have a massive project that im in the middle of where i have a 2000, 7.3, and the cab and bed were more rust than steel, so i bought a donor 08, and with some welding majic, i got all mounts in but i am having trouble with mainly the wiper motor and hvac system right now and i know you have quite a bit of experience in dash swaps and stuff like that so i was wondering if you would be able to help
100,000 subscribers would have to mean there's 100,000 people interested in swapping 08+ interiors into older superdutys that also follow youtube channels. That's a very specific crowd 😅 I'm surprised he has as many as he does (not because of content, but just because of the very small crowd hes broadcasting to)
So I’m swapping a 2008 dash into my 05 do I have to run a steering column helper or is there a way to wire it in without it if so I’d appreciate some feedback
so like have you gotten to the point where you could make an interior swap kit and send it to someone? Been watching a bunch of your videos and it's awesome someone out there is passionate about doing these swaps. I have a 15 Silverado LTZ Z71 and honestly my favorite part about the truck is the nice interior and bells and whistles it has but I want to get an older truck like an F350 7.3 with a 5 speed and do the interior swap.
Hey bro , I’ll been looking all your videos, and now I have a problem with my cluster helper, I have no power on cluster windows ac radio inside lights, but the engine runs. When we plug the laptop to the por for diagnosis everything works , I have no clue
@@a.performance9026 I saw a few post online. No one seems to be able to get in contact with him anymore. It's like he comes and goes with the wind. I would love to get work done by him but based on what I've been reading online he is hit or miss. It seems people are complaining because they can't resolve issues that they run into after he does the work, or people are trying to get in contact with him for refunds for unfinished work
zach man i need your help i hope you are still active and can get back to me, im not sure who else to ask..... i have a 2012 f250 with manual windows and locks i just want to swap to power, if you have hookups for all the parts i need and diagrams man i would appreciate it so much
Definitely is, my dad had an 01 a long time ago that had twin beams and coils and it was 2wd and his buddy had a 03 that was 4wd and it was a solid axle, i dont think any of the 4wd excursions came with beams
I’ve seen all your videos, and trust what you say.. but to others it might appear suspicious that he was able to get it to you, then unable to start again even with the assistance of jump box. Then you changed the cables and it fires no problem in the same video you’re marketing your cable kits for sale. Just a thought for your consideration. It would be tigh if you had a single page or two listing all of your custom kits available with year compatibility’s and costs. Maybe you have done already, maybe you haven’t been able to find the time. I’ve looked up E4 Motors before, not sure if you have a website, I don’t use Instagram if you have it there. I take this back, I know you have a video titled “how to contact me” maybe I should watch it again. It’s been a while. I know you make a bunch of misc custom adaptor type abs related stuff.
Waiting 5 months for my seat harnesses paid in full said they were almost done and been goasted now for 4 months sent emails Instagram messenger and 15 phone calls what’s up
@@angelmarks85 He is not a scam. I have ordered many parts from him in past. He has always been very helpful. Not sure what happened to him as I am also waiting on some switches since Dec 15th. No response from email. A bit concerned honestly.
@@Joe_Brown99 I do not think that is the case. He did get back to me and sent me my switches and made me a harness to go with them. He is just spread thin trying to get inventory up. Give him a break. I have only had good dealings with him and have placed many orders over the past few years. This was the first time it was significantly delayed but he made it right.
Zachary, where are you brother? Always looking for more content from ya. Hope things are goin' good
We need more videos….. it’s been too long 😂. Hope you are doing well!
I have a 2104 so I would never need to swap anything but your videos are awesome!!!!
Edit: I'd swap the black platinum seats for the KR seats all day long, that leather is beautiful!
Miss you buddy hope all is well
Miss your posts. You always have some really great projects
I've been considered an interior swap. Love your no-nonsense and professional work!
Genos garage makes a badass battery cable kit for my second gen. And for 450$ for all new grounds and power supply and fully loomed was great!
Glad to see ya again!!
Definitely a pats problem with the no start. Theft light blinking like crazy. I'm sure Zach knows the fix and just didn't see the light blinking. Then again with the swap it may blink and the pats system is still communicating I'm sure he will figure it out. Thanks again for all the videos! Gonna be sending you a few things for two swaps I'm doing. Talk soon.
I mean if you watch the whole video at the end he says that theft light was always blinking, but it still started. He changed the cables and it fired up with the light blinking.... So the PATS system must be fucked..m I know low voltage can mess with it, but even with new cables and everything it still blinked... Definitely not normal
Awesome work! LONG LIVE AXLE!!!
Hell I’d be down to schedule a complete swap in late 2024.
You should bring out your little sausage partner to say hi. Haven't seen him in a while.
Yes 2nd gens need that
OMG that Excursion is a fricken mess. Good luck with that build young man
Hey Zachary, you do some awesome work I just got a 2006 F350 Dually but I would love to do a swap of the interior if there’s anyway that we could get in communication together to speak over the process or the project. I’ll be awesome. I look forward to hearing from you .
How do we order one of your battery cable kits Zach? I have an 01 7.3
Theft light was flashing 😂 probably why it wasn’t starting, but the cables were still shit for sure 😅
If you'd watch the whole video it did start after he changed the cables, and the theft light was STILL blinking.... He even said it blinked before but still started lmao
Was just thinking about you and realized I haven’t seen a video pop up in a while hope your doing okay
I’m actually curious to see what he did to raise that 2WD. I have a 07 F250 with a Twin I Beam. I want to level or at least do this.
I have a massive project that im in the middle of where i have a 2000, 7.3, and the cab and bed were more rust than steel, so i bought a donor 08, and with some welding majic, i got all mounts in but i am having trouble with mainly the wiper motor and hvac system right now and i know you have quite a bit of experience in dash swaps and stuff like that so i was wondering if you would be able to help
How does this dude not have over 100,000 subscribers??? Jesus come on now ..
100,000 subscribers would have to mean there's 100,000 people interested in swapping 08+ interiors into older superdutys that also follow youtube channels. That's a very specific crowd 😅 I'm surprised he has as many as he does (not because of content, but just because of the very small crowd hes broadcasting to)
@@kshepthedrummer yeah you have a good point .
Well I am interested in swapping interiors into my 96 7.3 😅😅
@@Rebelious805 that's a nice obs you got there 👌
Zack are you building the wiring harness for the mirrors?
Do you still make the pigtails for the 2005 power mirrors to the 2008 power mirrors? How do I get ahold of you? Thanks!
So I’m swapping a 2008 dash into my 05 do I have to run a steering column helper or is there a way to wire it in without it if so I’d appreciate some feedback
Hey Zachary do you what year you used on big red interior door panels
Have you ever done an 05-07 dash swap into a 99-04 truck, I’m think about doing this to my truck and I wanna know how hard it is and any tips you have
Dana 60? its 2 wheel drive right? coil springs are stock on 2wd
Are you taking on any new projects? I have a 99 F250 that I would like the interior swapped.
so like have you gotten to the point where you could make an interior swap kit and send it to someone? Been watching a bunch of your videos and it's awesome someone out there is passionate about doing these swaps. I have a 15 Silverado LTZ Z71 and honestly my favorite part about the truck is the nice interior and bells and whistles it has but I want to get an older truck like an F350 7.3 with a 5 speed and do the interior swap.
Anyone know where he’s located? I just got an 03 f250 super duty crew cab and want to know if he has made any plug and play options
Where do you sell these wire kits? I have a 2003 f350 7.3
How does one get ahold of you to do some wiring?
Going through withdrawals. Where you at Zach. Been a hot min since your last video.
I need to run a bypass line for my accelerator petal to hook up my sensor I don't have a line coming off of the wire harness
Hey bro , I’ll been looking all your videos, and now I have a problem with my cluster helper, I have no power on cluster windows ac radio inside lights, but the engine runs. When we plug the laptop to the por for diagnosis everything works , I have no clue
Where have you been man?
Hey Zack. Hope everything is ok?
Where Dudu get the battery cables?
Does anyone know what has happened to Zac?? No new posts in a while. Any help would be appreciated.
Zach how can i set up time to talk to you bro, how do we access your merch to buy
Where you go bro !?
This delay to turn on could be the oil pump, mine was like this
where did ya go?
How can I get a set of cables from you.
Are you located in Florida
How can I get ahold of about doin an 07 6.0 2010 interior swap
Could you build a cluster for a 2003 ford f150
That's not a Dana Super 60... That's just a 2WD with beams.
It was sarcasm, that's obviously not a solid axle lol
where did you go bro
Do you still do these builds?
RIP homie
Did he die??
Where are all the new videos
Do you have to have the mcnasty dash kit or is there a different way to do it
Yo man where you at
How much would it be for you to do mine lol
Hi are you on Florida I’m interested on your service for my 7.3 from 2000 I want to install the dashboard and the interior
@@keithpaysour4372 thx 🙏🏻
Where can I see your cables for sale?
Wondering the same thing
It was completely dry if fuel I’m guessing..
Sending unit rubber pick up boot inside fuel tank laying loose on bottom of tank?
What’s the guarantee that if i ship my stuff to you that i will receive it back or is there no guarantees?
Where is he? He hasn’t posted in months :(
Are you coming back to Florida
I was wondering ,if he is from florida i have a truck i would like to get done
@@a.performance9026 I saw a few post online. No one seems to be able to get in contact with him anymore. It's like he comes and goes with the wind. I would love to get work done by him but based on what I've been reading online he is hit or miss. It seems people are complaining because they can't resolve issues that they run into after he does the work, or people are trying to get in contact with him for refunds for unfinished work
That thing is a pile of crap. I know you’ll make it look awesome as usual.
This guy doesn't make videos anymore
zach man i need your help i hope you are still active and can get back to me, im not sure who else to ask..... i have a 2012 f250 with manual windows and locks i just want to swap to power, if you have hookups for all the parts i need and diagrams man i would appreciate it so much
Does anyone know what happened to this guy, he hasn't posted anything in a while I hope he's okay?
Is that excursion a 2wd?
Looks to be 2wd. 5:55 not a solid axle.
Definitely is, my dad had an 01 a long time ago that had twin beams and coils and it was 2wd and his buddy had a 03 that was 4wd and it was a solid axle, i dont think any of the 4wd excursions came with beams
What happened to you? I don’t see you on RUclips anymore
How much for a set for a 2004 F250 Harley Davidson Edition with a 2006 6.0?? I didn't catch the price!!!
Zach whered you go bud?
That's what I'm wondering
Zach passed away recently, he was involved in a fatal car accident…..! Rip
No way. Really?
@@GABEG713 yeah man shits crazy
Prove it.
It won't start because it's lacking either air or fuel. Look at that airfilter! Spray some either in the intake.
Or it's the "security" light. I saw it blinking like crazy. Usually means the PATS (Passive Anti-Theft System) is not recognizing the chip on the key
I hope the either comment was a joke..
@@DirtyBeardCustmz724 I sure hope so! If he's serious I'd hope he woulda watched the whole video before commenting 😂
I’ve seen all your videos, and trust what you say.. but to others it might appear suspicious that he was able to get it to you, then unable to start again even with the assistance of jump box. Then you changed the cables and it fires no problem in the same video you’re marketing your cable kits for sale.
Just a thought for your consideration.
It would be tigh if you had a single page or two listing all of your custom kits available with year compatibility’s and costs.
Maybe you have done already, maybe you haven’t been able to find the time.
I’ve looked up E4 Motors before, not sure if you have a website, I don’t use Instagram if you have it there. I take this back, I know you have a video titled “how to contact me” maybe I should watch it again. It’s been a while. I know you make a bunch of misc custom adaptor type abs related stuff.
Everything is ghetto rigged and he takes it to you caked with mud…. Nice.
what is your email would love to set something up to have you do my truck i have all the parts just not the skill or the patience to do it my self
Waiting 5 months for my seat harnesses paid in full said they were almost done and been goasted now for 4 months sent emails Instagram messenger and 15 phone calls what’s up
This dude is a scam?
@@angelmarks85 He is not a scam. I have ordered many parts from him in past. He has always been very helpful. Not sure what happened to him as I am also waiting on some switches since Dec 15th. No response from email. A bit concerned honestly.
@@eclifton4070
He actually is a scam. More people than not he’s screwed over
@@Joe_Brown99 I do not think that is the case. He did get back to me and sent me my switches and made me a harness to go with them. He is just spread thin trying to get inventory up. Give him a break. I have only had good dealings with him and have placed many orders over the past few years. This was the first time it was significantly delayed but he made it right.