Knife Making: Feather Damascus Hunter
HTML-код
- Опубликовано: 2 окт 2020
- First hollow ground blade on the new belt grinder I made. Feather damascus made by my talented friend @sperber-knives make sure to check his channel out: / @sperber-knives
Handle made of wengè, bulloak and buffalo horn provided by:
www.etsy.com/shop/WholeEarthS...
Pins are 2mm carbon fiber and fiberglass rods.
Homemade black and white felt liners made like in this video:
Homemade Liners: • Felt And Resin Liner /...
And here are some of the videos about the tools I used:
Hardening oven: • DIY Heat Treatment Oven
Tempering oven: • PID Controlled And Ins...
My lovely drill press: • ROSA Drill Press Resto...
I listed some of the stuff I use for my projects in this amazon storefront:
www.amazon.com/shop/blackbear...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
Index of operation and materials:
0:24 Quick etch in ferric chloride to see the pattern
0:40 Knife sketch used as stencil
0:54 Cut excess material with metal cutting bandsaw
1:08 Grind profile with 2x72 belt grinder
1:30 Inside radius refined with die grinder and stone grinding bit
1:50 Cente punch pin and weight reduction holes
2:00 Drill holels, 2mm for the pins
2:20 Blate tapered from ricasso to tip with 2x150 belt grinder
2:37 Notch filed in with round file
2:50 Hardening: heat to 795°c, hold for 8min and quench in 70°c oil
3:17 Tempering: heat to 200°c and hold for 2hrs (final hardness between 50 and 55 Rockwell)
3:30 Hollow grind bevels with 2x150 belt grinder contact wheel
4:00 Three 15min cycles in ferric chloride with light scrub in between
4:12 Istant coffee etch to darken more the high carbon steel
4:40 Handle stack glued with 5min epoxy
5:18 Black felt liner glued with 5min epoxy
5:52 Temporarly hold tang to scales with ca glue and masking tape
6:03 Drill pin holes in one scale
6:20 Match drill the other scale again with ca glue and masking tape trick
7:04 Finishing top of the handle as it can't be accessed later
7:30 Notch for loop ground with dremel
7:40 Final glueup with 90min epoxy
8:49 Handle squared up with flat platen
8:59 And sculpted with contact wheel
9:22 Hand sand up to 400grit
9:43 White mineral oil for finish
9:55 Short secondary bevel ground with MadEdge: www.madedge.net/
10:20 Strop on leather with fine polishing compound
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects 
Хобби
If you want to know more about any process check description, I always write detailed list of operations and product used.
And if you like what I do consider supporting me by joining as channel member or through Patreon for early access and voice-over edit of my videos. Thank you!!
Can you make out my design of a kunai?
Cool!
what about making a sheath for the knife?
now make a leather selther pls
ㄴ554ㅡ
Dude, that's stunning! The pattern is gorgeous, the handle is stunning, and the contrasting pin colors was the icing on the cake. Bravo, man.
That is one of the most beautiful knives I’ve ever laid eyes on. Great job.
Dude, I absolutely love it!!! Thanks you so much, what an honor for me!!
you gave him some beautiful damascus, props to you, too!
@@hooogahooga2909 thank you!!!
The profile really compliments the Damascus pattern. Amazing work as usual!
So satisfying to see scales with so many pins just sliiiiide into place. Beautiful piece!
Man that low layer count really makes that pattern bold and stand tall! I like the segmented handles that you made and your design for the knife is awesome as always!
Good to see a knife made in 1 video, not a 12 part mini series
Love this design! The leather tassel on the end is a clever addition but this knife of yours is just begging for a fine leather sheath to go along with it. Any plans for it? Perhaps make it appear similar to a feather to match that amazing Damascus pattern!
Thanks once again for sharing your incredible talent!
Costom handemade damascus steel knife for sale all country payment paypal
stunning... you are one of the most talented people on RUclips
What a beautiful example of your work! Outstanding skills! 🤘
Simply beautiful. A piece of art. Very well done !
Looks amazing, that Damascus wave is mesmerising. Great handle too!
Always a pleasure to watch you at work creating things of pure beauty.
One of the best looking knives you made.
Gorgeous piece! And I love how you integrated the leather loop into the handle. Way nice looking that just a normal hole through the end.
You are one of the greatest bladesmith I've ever seen
Keep goin'
One of the most beautiful demascus and on of the coolest design I seen... beautiful work!🙏👍
I could sit there and watch your videos all day because you have such a men's talent you turn ordinary metal into masterpieces
What a beautiful knife. Amazing work!
I've seen you make some really beautiful knives, but this one is my new favorite. Nice design.
I made an epoxy resin trench knife inspired by your knife making videos , I cant explain how much I love your work, keep it up man big hug from Argentina.
Now that is a knife! I really like this one, great look! Nicely Done!
Master Knife maker!!!! beautiful Knife, BBP!! thanks for sharing.
Beautiful knife my Friend ! Great job 👏👏👏 I'm a big fan of your work ' ✌️ from 🇺🇸 !
Beautiful knife, both the blade itself and the handle is gorgeous!
Просто бомбическая вещь!!! Автору глубочайший респект!!!
Cara, ver você trabalhando faz parecer fácil. muito top parabéns!
Want it! A beutiful crafted piece! Detail on the blade is amazing.
Beautiful knife! Love that Damascus pattern!
You are really good at free hand grinding. Wonderful work. I love the design.
Bravo - that hollow grind
Love it, as always. Good job !
Good Lord, that is a *beautiful* blade!
I don't often comment - but I must say that is one of the most beautiful knives you have made
i love that knife, the blade shape and damascus lines, like a feather. i would like to have one like this, just perfect.
That's beautiful. Good work.
So excited to watch a truely master in Action thanks sharing
These damascus knives are too beautiful to use for working knives. I would put them on display as art.
My favorite knife design. Congrats dude.
Most beautiful knife I ever seen.
This one looks absolutely amazing!
You make it look soooo easy! Very well done!!
Complimenti!!! Un'altra opera d'arte!!!😍😍
What a piece of art you making !!
Very beautiful work, thanks for sharing!
This is awesome! Love the work!
Beautiful pattern, especially on the left face with the menacing "eye" on the spine. I think you should try making one with clear epoxy handle. Maybe leave in thin spacer materials you normally use and all the cross pieces but use table top epoxy instead of wood.
Absolute beauty of a blade!
Wow !!!!!!!!!!!!!!! What a peace of Art !!!!!!!!!!!!!
As always absolutely awesome work. What a fantastic blade and Mr. Sperber did a fantastic job with the pattern weld. I would give almost anything to own that knife. Great video
Thank you very much ❤️
That’s a lovely piece of metal and a lovely dagger.
Awesome!! Absolutely gorgeous work!!!
The concealed lanyard hole is just icing on the cake!
I'd love to have this knife in my kitchen. Nice work.
Awesome as always I wish I had your talent and tools!👊👍😀
Looks Awesome Brother :)
Am I the only one who thinks of Hulk Hogan whenever someone says brother? 🤔
Costom handemade damascus steel knife for sale all country payment paypal
VERY Nice 👊🏽💥💯... Love the way you darkened your Damascus pattern 👌🏽
Beautiful knife! And kudos to the maker of the Damascus
L'ensemble est superbe, bravo pour votre travail, il y a de quoi être fier !
The superb craftsmanship is very worth watching. Damascus knives need responsible skills and artistic accomplishment, amazing work
Some of you ideas and methods are genius... the others are just awesome!
Awesome video. Spectacular craftsmanship!
Absolutely stunning knife dude. It must be very rewarding to make something that beautiful.
legend has it that every time his arms needs a shave, he crafts a knife
i don't think that's legend its truth.
Bello! Veramente stupendo! Hai tirato poi veramente bene la trama damascata!
Loving those scales!
Now that's a sick looking knife!
Oddly satisfying. Beautiful work
You are my workshop teacher
Groovy build, man!
That one gorgeous knife there
Wonderful design and amazing job !!!
Love the finish really nice work man
That's a beauty!!
Thats one of my favorites!
That is a beautiful knife. I'd love to have one of those.
That is a beautiful knife!
I just love your art work, You are extremely talented. I am intrigued by metal work and especially knifes. Thanks
... knives*
What a beautiful knife!! Very nice!!
Awesome! Very beautiful knife!
Damn... That was super cool. Great knife.
Stunning!!
Respect from Egypt Man 👌
This knife is fantastic, amazing handle, greetings 👌
That's a beautiful knife and excellent leather sheath
Beautiful work.
Hermoso trabajo un fan de tus obras magnificas :)
Very Very professional work!! This kind of steel and design is Best! 👍💪💣 Keep It up!! 🤩
Beautiful build !
That's a piece of art
Excellent work👍👍👍 . Thanks for sharing
Very good job, mate !!
woah your work is incredible i’m subscribing tf 🥰
An absolut EPIC Knife ... 😍🤩😍🤩🏆
That knife is a beast!
Now the sheath
What a beautiful knife :)
That was amazing
love your knife videos!!!!
Eu faço, mas não fica com essa perfeição kkkk um dia chego lá.
Meus parabéns