How To Restore and Recolor Stamped Concrete - A Color Restoration Project
HTML-код
- Опубликовано: 19 апр 2017
- Walttools Tru Tique is a water-based antiquing color wash solution designed to provide the natural, two-tone mottled effect normally obtained by the use of colored release agents. Tru Tique is perfect for coloring new concrete stamp or texture surfaces and providing the look of an accent release agent without actually using the release. The specially formulated color agent will settle properly into the joints and deeper textures of the pattern to provide a good contrasting accent.
The products used in this video are very simple to use and can be found here:
Tique Wash www.walttools.com/product/tru...
Deco 2k www.walttools.com/product/hea...
Tru Tique is also the best choice for rejuvenating existing textured surfaces that have faded over time. When all older sealer is removed, you apply according to the instructions, let it dry and you can then reseal the surface with your chosen Walttools sealer product such as Heal and Seal Deco and your surface is as good as new.
COLORS USED WERE CHARCOAL and ADOBE
Direct URL:
www.walttools.com/product-cat...
For Sales and Pricing call: 1-888-263-5895
#decorativeconcretesupply #walttools #decorativeconcrete #verticaldecorativeconcrete #worldofconcrete #outdoorkitchens #outdoorgrillingisland #texturerollers #concretetexturerollers #outdoorfireplace #concretecountertops #concrete #concretesealer #concretestain #onlinetraining #verticaldecorativeconcretetraining #stampsforconcrete #decorativeconcretestamps #decorativeconcretetools #texturerollers #verticalmix #thestonematrix #IntegralColor #ConcreteOverlays #ColorRestoration #RestoreColortoconcrete 
Хобби
Thank you for posting this video. I watched this several times, ordered your charcoal grey and coffee brown, and our stamped concrete turned out fantastic. Very pleased. Couple bits of advice for those reading and about to embark on the project. Keep shaking the product in the sprayer or container while applying. Ours turned out a little heavy in areas. Buy a quality sprayer and practice spraying a nice fine mist. Before you apply the sealer, you will probably doubt yourself. I did. Some areas looked too concentrated, there were several drip marks where my sprayer dropped spots when I applied the accent color.. I used the blower and the water to mitigate it, but it didn't disburse the product like it did for the pros in the video. It won't look perfect, but that's just fine. It's stamped concrete and you don't want a uniformed look. It's forgiving and even with my mistakes it turned out awesome. Do this yourself and save the money. It was fun.
Great video it was very helpful I'm going to do the same for my patio and that gave me some great ideas, thank you Sir.
Amazing work guys!
Like how the sealer is white on application so you know where it's going. My stamped patio is overdue for this, but thankfully I colored the concrete a mocha color, so shading would just be one step with the walnut coloring and grout lines. Great tutorial, thanks.
That is phenomenal
Excellent video, thank you very much!
So helpful and well explained..
Many thanks ! 😊
Hi Team, I wanted to let you know that I applied the techniques in this video and was able to match my new patch to the old patch. We had new concrete poured and the team used the wrong releaser. I went and purchased the correct color antiquing powder and applied it as explained here and got great results.
Great vid. I want to color my already existing stamped painted sealed patio (much like with showing in your video ) but I want slightly change the color from greyish to a tan-ish river rock look. Can I just apply the steps you did (just simply add color on top of the existing patio and then apply sealant on top of that?). No need to strip off the sealant on the existing patio before I try to re-color.? Thanks
Great video! This is exactly what I want to do to my stamped concrete patio. Can you tell me the name of the charcoal powder?
Need your advice: It has only been 5 months since we restained and sealed our driveway, using polyurethane (gloss finish) and it is starting to flake off ? Preparation by trades person, as far as i am aware was done properly - being - acid was and pressure rinse; left to completely dry, free of debris etc. then tint and seal applied - 2 coats after a primer...is it potentially an adhesiveness issue? Much appreciated
How many ounces of the mix did you use for the Adobe accent color? Great video!!
This is just what I needed!! I had a new patio poured, stamped and sealed two years ago and was told it would need to be pressure-washed and re-sealed in two years. Here were are and some areas are really light and others are really dark and I was told it now needs to be stained. I felt like there had to be a better way to do it and this is exactly what I was looking for, except I did purchase a non-yellowing acrylic vs what you used. I hope that will work as the sealer. I only want the charcoal too and am hopeful it will turn out as beautiful as it was two years ago. I didn't realize it would need to be done so soon...thought it would last for years. Of course, they didn't tell me that up front. Would a double coat of sealant make it last longer?? Thank you so much for sharing this video!!
😊😮😅9
Great video I’ll be buying the materials needed real soon - do you sell via Amazon was put off by shipping fees that were more than half the total cost? I ship things to my customers to and so I get the fees I’m not judging honestly. Just have a budget for this job
What can you do when some of the decorative concrete surface has busted up exposing the rock in the concrete
Question. Why does the pigment breakdown at the seams if it's only a year old? They added the pigment to the mix at the factory.
Can you change color from red to silver?
How do you repair places that didn’t get any impression of the stamp
What materials I need to due my patio I know the color I need I just need to know what else to buy besides the color
I have a concrete overlay on my patio here in Houston that has not been resealed in many many years so the pigment is completely coming up all over a place. I know you're not supposed to pressure wash but I am purposely pressure washing to get as much of the old color up as possible... So that I can redo with this stuff. Do you have any suggestions on how to expedite the removal of the old stain in order to make it as light as possible? There is no remaining sealer on the deck
Is there any prep to patio before?
How are you
Was that release you used in the water??
Does the stamped concrete need to be stripped of sealer before stained?also have you had any luck with the glaze&seal lacquer on stained concrete?
Where do you buy that sealer?
Is the product bad for the grass?
Great video! Thanks for posting! What colors did you use?
Tique colors were Charcoal as the base and Adobe brown and the top accent color.
Where can I buy the sealer?
I am located in the Niagara Peninsula in Canada....are your Tru-Tique Color was and Deco 2K sealer available in Canada?If so where can I buy them.Great video, this is exactly what I am looking to do wish my stamped walkways.Norm
Yes, they are with two dealers, one in laval and one in Hamilton.
What's the cost by sq ft on this job?
I have an old faded light red stamped patio. Could I use this stuff to get a more light gray color or is it better to paint over with a masonry epoxy paint? Wife hates the color of the patio now since it’s 8 years old and severely faded.
Mine is the same i hate it
@@ironjunkie2011 I ended up getting some gray outdoor cement paint from Lowes. It took two full coats and now looks good.
Terra cotta color it the same way
@b8ascrub how has the paint held up? I also want to repaint my stamped red concrete but I actually like the red/terra-cotta color
Great video. Do you have any color combinations that you would recommend if I wanted a lighter gray patio?
Jane Doe , you can’t go much lighter than the original because the material is semitransparent. Stay light with the tru tique color such as the Natural or Champagne
Just ordered this in sandstone, what happens if it gets wet again after the color dries?
The powder has a small amount of resin that helps hold in place but it is not made to be permanent. WE often rewet it to make corrections. An example is broom marks. Just rewet, agitate and let dry. You can even broom it while dry to abrade some of the color off the top surfaces to provide more contrast. If the question is in regards to RAIN, then it will be okay with light rain bus a god hard rain will remove some color. If not remove it, it will wash it of the top surfaces and concentrate the grout lines more. Hope that helps.
Walttools thank you you answered my question perfectly!
How you made the cracks disappear?
If you are asking about the cracks in the beginning, they were filled with our stampable overlaymnet called Overeze. Then lightly sanded before we began the process of the recolor.
Walttools awesome great job!
Alex G thank you!
Cost?
Just use color hardener and water.and mop it on.
I still see foot steps. Plus I don’t think that color will stay for 1 to 2 years
I am will yu
⁹
just horrible, really a brush with brush lines, a leaf blower with dirt flying all over it. jee whiz... don't do it this way, mop it on for crying out loud....