How to Make a Custom Antler Handle For a Mora No. 2
HTML-код
- Опубликовано: 27 ноя 2024
- Follow my Instagram page @anonymouswan_
Check out our Facebook Page F-Knives Custom Knives And Handles.
/ f-knives-cus. .
Yes, Many Knives are available in the F-Knives eBay Store!
www.ebay.com/us...
A basic documentary on how F-Knives made a Custom Handle for a Morakniv Classic 2. Blade from Mora of Sweden.
It consists of Birdseye Maple, Redwood Lace Burl, Canvas, and a Black Tail Deer Antler.
Feel Free to ask any questions!
Absolutely gorgeous. A work of art. I’m getting ready to start my first knife with a Mora No. 2 antler handle.
Nice job. Very clean and traditional. A wonderful combination that never gets old.
Thanks Gibby.
Ive watched this a few times and finally got the initiative to do it.It Turned out pretty good for my first time. Thank you for this video!
Would like to know what the strips were you were cutting with scissors ?????
Well done and a very nice result. I like the idea of re-purposing the knife with the more elegant antler and wood. Antler is tricky. It has its own lines and curves. You've got to work it just right with the wood to make the lines of everything flow. A great project. I'm gonna try it.
Thank you for your comment!
Check out our Facebook page for our latest projects.
facebook.com/F-Knives-Custom-Blades-and-Handles-1437784426533353/
Antler is a pain because making wood mate with Antler creates a huge room error.
Check out our other videos as well!
To all the people bitching about the breathing noises...Lighten the hell up please. The man does beautiful work, and unless you live your life with a respirator strapped to your face, you don't understand how dangerous BREATHING PARTICULATE MATTER from sanding, welding and machining processes can be. God forbid you have allergies etc. Give the dude a break.. Rant off.
mark burress
Pretty much hit every main point.
On newer videos there's a new respirator and I breathe much better, I just have shitty lungs and I'm out of breath if I go up the stairs too fast.
Thank you for watching:)
I had my doubts while watching this but you made one of the best looking knives on RUclips!
Very nice blade handle You've created. Nice job.
The nose whistling is a nice touch:) Good job on the project..right on:)
LOL. I had to mute.
Just needs the starwars theme playing low in the background
What liquid are you dipping the knife in at the end? Great work and I love the no music no nonsense approach for your videos.
Probably linseed oil.
beautiful result love this video especially no music to distract me from learning your skills !
This is beautiful! It helped me answer questions on how to join wood and antler together. Although, I think I'll try to do this without the canvas first. I'm not sure if you might now, but, I'm wondering if you have recommendations on how to repair a drilled hole that went too far in an antler? I'm making a tobacco pipe and accidentally drilled too far for the bowl piece! If a repair is possible, the materials would need to be fire resistant and safe for smoking... still searching for possibilities. No problem if you don't have a comment on that. Thank you for this video, nonetheless! Love it.
Excellent! Wish I could do this too on my own, love how the knife looks at the end.
I live in Africa, so I've got a Gembok horn. It's black, so I'm wondering how it'll turn out.
I bet it would look great if it has a thin horn at the tip!
That turned out excellent. Great job friend
Super. You’ve inspired me to modify my knife into something too beautiful to use anymore.
Out of curiosity, what type of epoxy were you using? Also, at the end of the video, what was that liquid you dipped the knife in? I'm a beginner at this, and would like to gain as much knowledge as possible, before attempting to make stylish handle, and failing a few times lol
Scagelesque scandi! What gorgeous knife.
That calm and heavy nostril breathe reminds me of my grandpa as i was studying his work :)
My dad found a knife like this decades ago stabbed into the ground by a river, I’ve always wanted to find one and thanks to this video I’ve made one.
What is the compound called that that you are using made by 3M adhesive? Awesome job done on the knife.
Fantastic work was it just black and white cloth you used. Hope u can help
It would be helpful if you gave a materials list and a little more information like how do you prep the antler before you use it etc. The finished product is excellent
Wow, came out beautiful.
I’m currently working on a knife and I thought about ordering some reindeer antlers to make the handle do y’all think I should do it or get some polished oak wood
Whatever you really fancy. For me to use antler or anything I need to have the PERFECT antler. Its also what you feel comfortable with. Personally, antler is just drilling a hole and shaping the bolster, wood is sculpting out the whole thing.
It looks absolutely amazing! Btw what kinda of wood is that dark wood you used? It's one of the prettiest things I've ever seen in the cruel kingdom of god. And also, why did you stacked those pieces of cloth between the two different woods?
Nice looking handle.
Love that stack technique... well, love to watch someone else do it. Haha... but i like this way more than shaping horn, bone, or antler.
PS- I admire how you use the vice to set up all the stages of work. Simple and genius.
beautiful job, what was the cloth material used in the handle?
Nice job well done and no boring narrative taking up 33%of the video
If you can get your hands on some purple heart wood, it would look great with an antler for the handle, I have worked with purple heart wood once, and this is my second time (currently making a handle for a mora blade) using the wood but it is a nice color when the project is done.
Never really liked it.
More of a Redheart kinda guy
Not sure if my second question got posted or not, but what kind of oil did you use as a finish at the end?
Nice work.. but I think that all the stuff that you put at the front of the antler takes valuable space for the tang to be effective and making it a “safer” knife to use. Beautiful show piece though 👍
I am making a knife in school and this truley inspired me. What kind of wood are you using?
If you do happen to look in the description,
It has a brief description of what woods I use.
Parabéns pelo belíssimo trabalho! Ganhou mais um inscrito!
Abraço do Sul do Brasil
Wait. So when using antler, you don't need to use pins? You can just use epoxy to keep the handle on? Or am I missing something?
Modern epoxies work great,no pin needed
Exactly how is the blade anchored into the handle I think I’m missing something sorry.
Is it epoxy?
Beautiful knife and great video. What is tat cloth-looking stuff that you laid between the woods?
Cotton Canvas
Pretty much creates a nice defined layer.
It really DOES! Looks beautiful. Where do you get cotton canvas, at an arts & crafts store??
Drew B yeah pretty much
I'm pretty sure I got that scrap from an old bag or something
What’s the fabric that you are putting in between the pieces of wood
Why do you have to put material in between the stock handle pieces?
Just a suggestion. Next time try a blade by Lauri. I think you will be impressed.
Very nicely done! Perhaps make an instructional video narrating step by step.
Very nice job
what are you dipping it in
is this a shed or something you killed? what kind of prep work did you do to the antler?
just upped the price on that mora like a piece of art !
Beautiful work, I want to try it now!
Thank you! Make sure to watch our other videos.
I watched this kne video... subscribed and added to my playlist.
He apply some glue to the wood stopper and to the deer horn.. but in the middle of two wood he put some clothes as a expansion material.for temp.change.hand palm protection..
nice work bro...what kind of oil you can use for knife handles?
Depends, Canola works great, Boiled Linseed does too.
You go through a lot of work making these knives, Why is it that you don't build guards into the handles? Especially the Moras!
I never had a knife with one, but it does add quite a bit more extra in the process.
but I'm sure it could be done.
I actually try to make these the most economical as possible.
That's why some knives are much more pricy than others, just reflects on the amount of work and materials.
Thank you for watching!
What type of oil do you use to finish/seal the handle? Thanks.
Very very nice work 👏
You can get Mora #1 and #2 knife blanks so you don't have to spent the time loosing them from their birch handles.
This is a decently old video, I've learned learned a lot since then.
Thank you!
You had me fooled because you did an outstanding job.
thank you you make amazing knifes I love all of them good job
sweet ! personally I would have put a brass guard .
I tend to avoid using Metal on many knives. I mostly use woods, since a lot of metal is expensive and it's hard to machine.
making a Bass Guard and a Corresponding Slot to fit the blade becomes harder on the whole process of making the knife.
Putting Metal on a stacked handle also means you need to have a very clean belt on the grinder because if not, the heat could burn the epoxy (remember epoxy works with a thermal reaction)
Feel free to ask more questions!
I noticed the gap too
F-Knives: Custom Blades And Handles just keep the knife cool with water and recess the tang so it’s square, ez-pz better to have a brass guard than leave end grain open, also you should probably clamp those segments together a bit tighter
can i get some measurements for everything? ie: wood size for the blocks that u cut, how deep to drill into everything etc
You're going to have to find out through some trial and error.
But I will say that 1/4" drill bits are a man's best friend when it comes to a lot of this work haha.
What was the oil at the end that you dipped the handle in
OH MY GOSH THAT'S BEAUTIFUL!
What is the white and black cloth you use for the spacers near the blade?
mavos1211
Cotton Canvas
Thank you for watching!
I know this it quite an old video, but what is the type of wood your using. It looks very nice by the way.
corben mckiness
If you look in the description, it says that it's Birdseye maple, and redwood lace burl.
Thanks for watching :)
F-Knives: Custom Blades And Handles thank you
Could i know what materiale Is that one that looks line paper??
Can you tell us the tree species you use in this video?
👍
What did you dip the handle in?
Gorgeous! Nice job!
what kind of wood do you use for parts befor the deer antler. Also what do you put in between the parts. Is that sand paper????
Matthew Paxton
Tis all in the description.
Birdseye maple, Burl, and cloth
oh ok didnt see that thanks. Hey do u just dip it in oil after ur done? ANd if so does it keep or do u half to treat it again and again
Get sum surgicial tubing . It saves on string . Or fat rubber bands . Makes for a firmer securement
Did a hell of a Job on that handle .
Just seen where I complemented you few years ago lol
Well done! That is a beautiful outcome, I must say. You've earned a new subscriber! :D What sort of oil do you use for finishing? Is it linseed?
DansKnivesAndStuff
It happens to be just plain Canola haha
F-Knives: Custom Blades And Handles Ah, really? Haha, I haven't heard of anyone using that before. It appears to work quite well! 👍
another question, would it be a bad idea to use polyurethane on the grip?
Not at all!
I try to keep it simple so just plain oil helps, it won't chip or damage over time.
In some handles we use Wood Hardener and that creates a Gorgeous gloss compared to oil.
Just using what's around you know?
Poly Coatings would work like a dream though.
I'll Add is to the List of Things To Try!
Check out our Facebook page :
facebook.com/F-Knives-Custom-Blades-and-Handles-1437784426533353/
We have all the pictures of our projects and even more!
where do you buy the knives that you use on your video? what kind do of cloth is that?
That's a plain Mora
You can get them on Amazon.
The cloth is Cotton Canvas
beautiful knife, but why no hand guard?
Most these Moras don't come with a Handle Guard, so we tried to keep it simple and authentic.
I am working on a new video for a special blade that will have a Guard (Somewhat).
Make sure to check out the other videos
What is the cloth-like material you cut with scissors ?
İnan Eskikoy
Cotton Canvas, Creates a nice line between woods.
Nice job, well done.
What is in the jar that you dip the handle in at the end of the video?
I get this question asked often haha.
It's oil.
Plain Jane Canola oil.
It not only brings out the subtle features of the wood grain but also protects the Carbon blade.
Make sure to check out the other videos!
We also have a page on Facebook, it's called F-Knives Custom Knives and Handles.
thanks and you make some telly cool knifes
Belo trabalho
beautiful handle!
Hey I have a question the fabric between each pieces of wood and the horn are they necessary or are they just for Aesthetics?
Dustin GraveRose
I like it
it cushions the pieces because cuts can't always be 100% square, it gives room to fill
But what I'm asking is if I don't put the fabric between the pieces of wood or horn will the structure of my knife handle still be strong I just want to know if the fabric pieces are to make it look good or they actually help hold the handle together that's all
Dustin GraveRose the fibre he uses inbetween the wood and antler provide like a buffer zone so that the materials join neatly together. you could say it's just for aesthetics but I believe having a nice tight fit and having no "play" in the handle will make it last much longer. either way you can make a knife with or with out the spacers
B355Y
ok thank you
looks excellent! love the color choice of your stack. Is the epoxy primarily holding the tang in, or did you pin it or something as well?
Jay N
Epoxy is all it needs my friend.
what do you dip it in at the end?
Next one of them knives you do take a piece of copper pipe and flatten it out bring it back to soft with heat slot for the tang and make a bolster for it texture the face with a small ball peen and scuff it out with 900 grit and 000 steel wool . nice work
I mean
Copper does oxidize
But, there MIGHT be videos of Lauri Knives Coming up that MAY have a Bolsters made of brass.
Subscribe to be updated!
yes it does but that is the thing about copper it is old world and still has its appeal . brass is nice so is silver and 304 stainless but copper is easy when it comes to knife maintenance . simple 3 ott steel . many carry steel wool in their tinder box or bag
9 volt battery and their is a Copper enamel paint as well that can be used for tint with epoxy and will hide the epoxy that fills the bolster hole as long as its not a crater . cleans up great with a razor . and the good part is you can use old plumbing pipe and make flat spacers and mix them with silver or thin sheets of stainless or even brass .. trust me people dig it and it works . i stopped using brass pins long time ago and went copper now since my ex and i busted up i am going to be away from the knife industry for a few years till i get my new shop .. look up custom knives of D.Shipley . in google images .. their are many out their .. again you do good work
and always willing to help with a pointer when i can meaning no harm we never stop learning right .. Blessings
+Lucky B
Mighty Kind Words
I'll be going into the Navy in Two Months so I am trying to crank out all the knives I can, not many people buy them, but they're there.
I'll look into copper for sure though.
Hey THERE
LuckyB I love the color od tarnished copper... if the valde is carbon you get to (or have to) keep it clean anyway. So a little copper is not much more work, if keeping up knives is work... I can amke a good case for play unless it is a discussion about chores... then I claim sharpening and cleaning the kitchen knives over most chores.
how much for the same exact one you made in your video. please let me know
joseph allen
Only the ones in the eBay Store are available sadly, I'm a sailor and I'm currently gone.
Feel free to check, there is a Damascus one with antler that's small and there is a video for in there as well.
What did you submerse the handle at the end?
If I'm not mistaken, that would be Oil, Plain Canola Oil.
Thanks for watching!
Wow!
Beautiful. 👍👍😀
What is the cloth your cutting and why?
Tis Cotton Canvas.
It's there to add a nice contrasting line between layers and it also provides a filling in case the wood isn't 100% square
F-Knives: Custom Blades And Handles THANK YOU! I'VE BEEN LOOKING EVERYWHERE FOR WHAT THAT STUFF WAS! :)
can you tell me what is that oils name ??
What did the last oil show?
this exceeds a DIY..... u have all the damm tools, I found a broken 7 inch deert antler today and said to my self mhm maybe I can make a knife out of this... I'm not even gonna try this.
Very nice indeed!
Even with a hacksaw... the smell is awesome with antler and horn. Yeah?
I think you could have ground it down a little bit more where the handle meets the blade
how long do you have to keep the handle in the oil for
Emily Estes
I honestly just keep it there for no longer than a minute
What did u use to coat the antler in?
The Antler on this knife was left natural.
Nothing but oil to show off the features in the end.
Woow it is very beautful Work 👍
What type of canvas as you using?
100% Cotton Canvas Cloth
I believe it is 9 oz. Canvas.
Make sure to check it the other videos!
Nice camera work. Also nice job.
Why do you put canvas between your layers?
Kind of to separate the wood layers and in case the surfaces of the wood are rough, it can fill that.
It's also just pretty haha.
+F-Knives: Custom Blades And Handles thank you for the quick reply. I made a knife out of a file and am trying to figure out how to make a handle for it. Why do you heat the metal and then burn it in the wood? What does it do exactly? Lol sorry I've got a bunch of questions.
+Richard Miranda
I actually just use a Metal File, It seems to work perfectly!
It makes a perfect slot that fits the blade like a glove.
+Richard Miranda
Feel free to ask any questions, always willing to help!
anyway beautiful work enjoyed it
what do you dip the knife in at the end?
In this specific video, Oil, it's Boiled Canola Oil.
Feel free to ask any questions!
+F-Knives: Custom Blades And Handles thanks, I'm going to try and make a knife similar to this. great video!
+Kevin Black
Pro Tip: Make sure the Antler is the Width of the blade all around, it'll make the handle to blade transition a lot easier.
Make sure to share with us when it's done!
+F-Knives: Custom Blades And Handles Thanks for the tip, will do!
+F-Knives: Custom Blades And Handles: I Just finished making a few of these with my brother and girlfriend. your videos helped a lot. We didn't make a video, but took a lot of pictures throughout the process. Had a great time making them, thanks a lot for your help.
Beautiful!
Is that cloth canvas?
Cotton Canvas indeed!
It's 9 ounce I believe.
+F-Knives: Custom Blades And Handles thanks, and a fine job you did!