Craftsmanship was excellent the blade would be very sharp. The blade is everlasting and hard but brittle too since it was hardened saw blade it was again hardened. So while using it on large bones extream care need to take or else it will break.
Hello Sir, Thank you for filming your build. A true craftsman you are and I'm sure you've inspired many people in different walks of life's to succeed. A super super film with a beautiful end product, thank you.
This is how a clever should look like, some extra cutting edge in, under the fingers, makes the blade much more utilitarian. Excellent design my friend! wish I could buy one like this from you!
Excelente trabajo. La suerte es que tiene la maquinaria y equipo para hacer esos trabajos. Además de los conocimientos, la paciencia y el tiempo. Felicidades y gracias por enseñarnos.
Very nice piece..❗🤔👍🏻 May i ask why you don"t do your grinding when Steel is in an Annealed state & rather after hardening & quenching in Oil, 3 times..⁉️🤔
@@edwardknives8692 Thank you..❗ That answers why in 80's when buying Blade Steel on thikness annealed then ginding and sending in for hardening and tempering often came back warped..⁉️🤔 The only problem i found working on a deceased Knifemakers Blank which i finished off with Handles in Stone Carved 3 Dimensionaly myself "Buffalo" was that the Edge had a "Burn" blemish on edge which a couldn't Polish away after endless attempts i Pearled/ Jeweled the entire Blade similair to the Bolts on Rifles, it was done for a Collector, which i did a Yellowood Stump Case with Knife inlet, lined with Felt & a Glass Lid & handmade Stainless Steel hinges, the front of the Case (Stump/log) was retained with it's Aging & weathered marks whilst all other sides were cut & plained true' etc..(1991) Was a fun project which i did for my Old Boss, retired Senior Partner of an Arch' Practice..❗🙇♂️ Shalowm ❗🙏🏻
Why did you go to all that trouble to add such a stupid but to your comment. Wouldn't it have made more sense to have stopped at "That's a gorgeous clever"?
Bonito trabajo, nomás el filo no me convence, cuando se presume una cuchilla bien afilada debe rasurar, un papel lo corta cualquier filo de media calidad.
Зачем было отжигать :потом калить и " отпускать. Сталь там замечательная - лучше не сделать а просверлить можно победитом. ; а у ручки болгаркой можно выбрать хоть зачисным хоть лепестковым. Мутетень по русски.
Craftsmanship was excellent the blade would be very sharp. The blade is everlasting and hard but brittle too since it was hardened saw blade it was again hardened. So while using it on large bones extream care need to take or else it will break.
Não mostrou, mas com certeza ele fez o revenimento. Parte essencial do trabalho.
Po hartowaniu tasak był stabilizowany w niższej temperaturze, więc nie powinno być problemu.
8v
Hello Sir,
Thank you for filming your build. A true craftsman you are and I'm sure you've inspired many people in different walks of life's to succeed.
A super super film with a beautiful end product, thank you.
Thank you, your comments are inspiring)))
Nice video, the guy doesn't have bandages on his hands or fingers, carefully executed.
Excellent work .
Congratulations .
I am from Sri Lanka .
This is beautifully done!!!
Amazing talent. Thank you for sharing.
A very well-made cleaver is not easy to find. I love it.
❤ it. Really great work. Well done. Greetings from Vanuatu 🇻🇺
This is how a clever should look like, some extra cutting edge in, under the fingers, makes the blade much more utilitarian. Excellent design my friend! wish I could buy one like this from you!
Thank you." Unfortunately, I temporarily do not sell knives to other countries 😔
Excelente trabajo. La suerte es que tiene la maquinaria y equipo para hacer esos trabajos. Además de los conocimientos, la paciencia y el tiempo. Felicidades y gracias por enseñarnos.
Your craftsmanship is excellent. Keep it up
Very good making👌
Saludos desde Chiapas buen trabajo mi amigo bien hecho buen cuchillo para las carnitas bendiciones
Really appreciated. Very nice job done.
Thanks ☺️
beautiful..... great job, fantastic result!!!
Thanks ☺️
Extraordinario trabajo.. lo haré igual.. felicitaciones desde Argentina..
Que linda magnífico ótimo trabalho gostei! Eu querooooo uma dessa aí! Até, silvio nunes! !
Wow, very nice sharp knife
Super jest to wykonany ten toporek Pozdrawiam serdecznie twórca tego filmu. 👍👍👍👍👍
Thanks ☺️
Excelente trabalho, parabéns
madeira do cabo bonita tambem....
щсс😅
Excelente trabalho, parabéns.
Deus te abençoe pelo seu talento!
Uma verdadeira jóia. Parabéns pelo cuidado na construção. Item para ficar exposto em uma vitrine. 👏👏👏 Brasil
Finally, I have seen someone on RUclips use a file properly!!!
Adorei o procedimento técnico e o produto enfim uma obra maravilhosa Parabéns .
Seu trabalho foi simplesmente perfeito. parabéns.
Love you from Cambodia ❤🎉
Que maravilla. Una obra. De arte hermano que talento te felicito 100 punto. 😜
Beautiful work and informative video. Thank you!
Great job. 🎉Congratulations!
Very good Congratulations
🙂🙂🙂
Você é um ótimo artesão muito linda essa faca meus parabéns .
Congratulations! Excelent job!
É UM EXELENTE TRABALHO DE ARTE , O SR ESTA DE PARABENS , EU FALO DE CARAGUATATUBA LITORAL NORTE DE SÃO PAULO ESTADO BEIRA MAR 👍🤣💯
Magnificent. I love it. I would love to have one.
Parabéns ficou show
Ficou linda peça parabéns
Có gửi về Việt Nam kg
Excellent work ❤
Excellent work
great job, hats off
This would look wicked with the knuckle busters as a grip.
Parabéns meu chapa top demais
Parabéns pelo trabalho
Parabéns cara que trabalho
И снова, просто прекрасно!!!
😊
Very nice piece..❗🤔👍🏻
May i ask why you don"t do your grinding when Steel is in an Annealed state & rather after hardening & quenching in Oil, 3 times..⁉️🤔
Hello. Since the steel is thin, I would not recommend making descents before quenching, as the steel can twist 🙂
@@edwardknives8692
Thank you..❗ That answers why in 80's when buying Blade Steel on thikness annealed then ginding and sending in for hardening and tempering often came back warped..⁉️🤔 The only problem i found working on a deceased Knifemakers Blank which i finished off with Handles in Stone Carved 3 Dimensionaly myself "Buffalo" was that the Edge had a "Burn" blemish on edge which a couldn't Polish away after endless attempts i Pearled/ Jeweled the entire Blade similair to the Bolts on Rifles, it was done for a Collector, which i did a Yellowood Stump Case with Knife inlet, lined with Felt & a Glass Lid & handmade Stainless Steel hinges, the front of the Case (Stump/log) was retained with it's Aging & weathered marks whilst all other sides were cut & plained true' etc..(1991)
Was a fun project which i did for my Old Boss, retired Senior Partner of an Arch' Practice..❗🙇♂️
Shalowm ❗🙏🏻
Perfect good job
Parabéns vc é um prifcional
عالی بود رفیق لذت بخش بود
Very nice keep it up
Number 1 mate👏👏👏
Очень чётко и красиво.
Ahhhh the old "cutting a sheet of paper" trick.
That's a gorgeous cleaver, but why go to all that trouble just to slice paper?
Wouldn't it make more sense to use scissors for that?
Why did you go to all that trouble to add such a stupid but to your comment. Wouldn't it have made more sense to have stopped at "That's a gorgeous clever"?
Good 👍👍👍
молодец! по латуни можно было бы еще набить простым бойком как бы чешую и чуть дать патины..., - очень красиво смотрится!
🇮🇩👌Good Joob.. 👍👍👍
very nice
ОГОНЬ!!! А какая толщина у таких дисков?
Спасибо)
2.6-2.7
Great job
good job🙏🙏
😊
Excelente 👍
1 вопрос эта сталь подвергается корозии если я не ошибаюсь,чем протравливаете.
Top kerja yg bagus 👍
Lindo excelente
qui maravilha muito bom pai Abel Souza lima salvador Bahia muito
Отлично молодец
😊👍
Nice job
Trabalho perfeito.
Muito bom !
Nice ✌👍
How to buy this knife
Wonder how much if it is for sale
Wow nice
🙂🙂🙂
Where to buy such Cleaver?
Bonito trabajo, nomás el filo no me convence, cuando se presume una cuchilla bien afilada debe rasurar, un papel lo corta cualquier filo de media calidad.
beautiful
Do you have a shop or take orders?
I want to buy your cleaver knife? How to buy? Thank you
Có bán sang việt nam không bạn tôi đặt hàng con dao này ở đâu
wao krem❤
Do u sell them? I would like to buy one. ☝️
Nice
I am from India
wow ❤❤❤
I want to buy.how much prize?
I'm not shipping knives at the moment, but the price is $100 😇
Cómo cuánto saldrá una pieza de esa muy bonita por sierto
❤❤❤❤❤❤❤❤
😊😊😊
Super tajam apakah sama dengan scimitar pedang Damascus 😂
verry good
Very smart
Nice job I one please
Nice..
How much is it ?
Зачем было отжигать :потом калить и " отпускать. Сталь там замечательная - лучше не сделать а просверлить можно победитом. ; а у ручки болгаркой можно выбрать хоть зачисным хоть лепестковым. Мутетень по русски.
👍👍👍👍
Сколка стоит вашу труд я хочу купит
Quanto uma faca dessa
❤👌🙄👍👍👍👍
Молодец