Marantz MM7055 Amplifier Review 5 Channel 140 Watts | Home Theater Audio Equipment | XLR and RCA
HTML-код
- Опубликовано: 13 сен 2021
- This is the Marantz MM7055 Amplifier Review. The Marantz has 5 Channel of power into 8 ohms at 140 Watts. This amp can be used with any preamplifier or home theater receiver that has RCA or XLR Outputs.
It was connected to a Marantz sr7013Receiver and a ONkyo RZ8040 Receiver. And tested with Definitive Technology bipolar Speakers, GoldenEar Aon, and Polk Audio.
Manufactures Specifications:
Power Output 140W (20Hz-20kHz, 0.08%)
S/N Ratio 105dB
Freq. Response (Analog In) 8Hz-100kHz (+/- 3dB)
Power Consumption 660W (Standby: 0.2W)
Dimensions W x H x D (Inches) 17-3/8 x 7-3/16 x 15-1/8
Weight (lbs) 34.6
#marantz #hometheater #audioamp #AUDIO If you would like me to consider reviewing your product please send a email to OldTradesAudio@Hotmail.com. All other product related questions should be posted in the comments section of the video.
I appreciate everyone's help and support in keeping this channel going. By clicking on the links, and making a purchase the same day, I may receive a small commission. This does not affect your purchase price. Many of these locations I have purchased from in the past. Some will have more advantages then others. Thank You for your channel support.
Brands Direct
SVS fxo.co/CilZ
Polk Audio fxo.co/Cil5
Marantz fxo.co/Cil6
Sennheiser fxo.co/CilD
Logitech fxo.co/CilF
Denon fxo.co/CilI
Monoprice fxo.co/Cilb
GoPro fxo.co/Cilf
Bose fxo.co/Cili
Sonos fxo.co/CixW
Multi Brand Stores
Best Buy fxo.co/Cilj
Ashley Homestore fxo.co/Cilk
Adorama fxo.co/Ciln
Abt Electronics fxo.co/Cilp
Ebay for used and new ebay.us/bGz5x6
GameStop fxo.co/CixX
Misc
Cinemark Theaters fxo.co/CixG Sideshow Collectibles and Statues fxo.co/Cj0K
If you would like me to review your product please send a email to OldTradesAudio@Hotmail.com Bowers and Wilkins www.pntrac.com/t/TUJGR0xGRkJH... Definitive Technology www.pntrac.com/t/TUJGR0tOS0JH... ..... Klipsch www.pntrs.com/t/TUJGR0lITUJHS... Crutchfield www.pntra.com/t/TUJGR0hGSkJHS... 
Авто/Мото
When I seen he was reviewing this I clicked so fast. One of the few honest reviewers
Thank you again. I appreciate you!
Awesome video by the way💪🏻❣️
Yes I did this with my Anthem MRX 1140 which is rated at 140 watts/ch I also have MCA 325 Gen 2 rated at 225 watts/ch a 3 ch amp for a complete front stage set up its going to be amazing however these speakers can handle it I went to the next level no holds barred keep the reviews coming cheers
Thats some great gear you have. How is the sound quality?
@@OldtradesReviews oh it sounds fantastic in break in period now once I run arc it will be spot on to I wanted to achieve
Great review. I'll be looking to Emotiva for AMP action.
Thanks for watching
I’m glad you talked about this amp because I was thinking about buying it to add to my Mm8077, I need more outputs. I have no way now to add Atmos speakers and I want to stay with what I own powered by the Marantz AV8805A. Good review
Glad I could help!
I bought the Denon X4500H and Marantz MM7055 “pen box” for $2,000. I know they are close in performance like your situation you described with the Marantz AVR. But my thinking is that now my Denon will just focus on processing the 3 front soundstage speakers and the 2nd set of Atmos speakers and only have to power the 4 Surrounds and last 2 Atmos channels. Therefore relieving the Denon of some it’s duties. I think there’s benefits in that too. What do you think?
Hello from France. I have a Emotiva basX-A3 power 140 watts. This Marantz do also 140. Would the sound be different, maybe better with the Marantz ?
Just ordered the 8077
I have a Marantz cinema 50 running in 5.2.4 but i want to go 7.2.4 or 5.2.6
I think of run all my bed layer(5) through the 7055.Makes Sense?7025 is almost same price,so maybe doing 5 channels brings upgrade .
I have the RZ840 with Outlaw 5000,both are 120 watts,so do you recommend the EMOTIVA XPA 5????
Could you put one (Cambridge Audio DacMagic 200M) connected to this one (MM7055?)
Thanks very much for your review. That is a great review. I am currently using Denon X3600h AVR and Klipsch R7 III as front speakers, RP 504c centre speaker. For this setup, do you recommend this mm7055 or you think Anthem MCA 325 is better or Rotel 1555? I use it more for watching movies. Really appreciate for your answer.
Glad I could help! Thats a tough one the Anthem and Rotel are also good brands. I think it will come down to what your hearing appreciated when they are connected. Component matching is everything.
@@OldtradesReviews Thanks very much for your advice, mate! I will try to talk to dealer see if I can hear them separately. Grart Thanks!
Did you try the ONKYO RZ840 with EMOTIVA XPA 5 gen 3??? How does the sound look like?
Thanks you
Thanks for watching.
Hai sir am using Marantz SR 8012 AVR with Bic America PL980 tower PL 66 surround PL 28ii center channel which power amplifier to suitable my system, Marantz MM7055 or emotiva basX 7 which one suitable power amplifier sir pls guide me thank you
I have the marantz 7013 which is les s power then what you have...and i find it very powerful in 9 channel modes. With definitive tech towers and sub to the lfe channel and sub wired inline to the surround backs. With that said you would need a Emotiva xpa gen 3....300 watts per channel to se ea difference. The bas x is too low power and may sound weaker. The MM 7055 may sound like the receiver
Hello, great video!
Will the mm7055 work well with klipsch reference r820f?
I have not listened to that speaker
Hi, I am new at this please help
I have Marantz SR5015 and Mm7055. I upgraded to SR8015 it really sounds good without MM7055..... Should I upgrade my Amp to match SR8015 or would Mm7055 work?
The SR8015 has the best preout of any current AV receiver so it will drive the MM7055 to output at full power!
i just bought a denon 4700, am confused which amp to go for ? this one or emotiva A7 ? please advice.
The basx a7 is 90 watts vs 140 for the Marantz. If your adding a few tiny satellites to the recover as height channels the A7 may be ok. If its for larger speakers the Marantz. A step up from the Marantz would be a emotiva xpa gen 3. I did a unboxing vid of it
@@OldtradesReviews I have 9.1 setup, floor standing Polk monitor 70 series, center and bipolar Polk. Dali height, klispch back surround. Marantz is 5 channel and other brands 7 channels are expensive. Emotive 7 channel seems to fit the bill. Your thoughts
The 90 watts of emotiva is to weak. You will hook it up and not notice a difference in multichannel mode, because like I mentioned in the the video when I connected the Marantz amp to Marantz 7013. Listen to the Denon in 2 channel pure mode at 125 watts x 2, and decide if you want 90 watts of weaker sound. The polks have 4, 6.5 inch. My polk monitor 40 sounds like a different speaker with the Parasound amp 2125 v.2 150 watt x2, I reviewed. That would be great for the 70s and take some load off the receiver. th e 5 channel Marantz amp would connect to the fronts, center and what ever is the next largest speaker.
@@OldtradesReviews that helps, will order marantz 5 channel amp. Will share feed back once I connect
@@OldtradesReviews And Finally if i connect the atmos channels to this amp will it work or not? i placed an order & should be getting by delivery by EOW.
I have a sr7015, this amp would bê a upgrade? He gets warm?
Yes adding the 7055 to your 7015 receiver will take a load off the 7015 and run cooler ..I use the 7055 for my front 3 channels and run all my surrounds and atmos height speakers off my 7013 ..Sounds amazing!! I also bought the AC Infinity cooling fans for them both and the stay constantly cool now ☮️
AV separates are better because each unit has its own power supply. A receiver shares its power supply between its internal pre-amp and power amp. This is really important when it comes to transients where the receiver may not be able to deliver the power needed. Very good review sir.
all channels driven????????
The tech specs say max power consumption is 660W.
5x140W = 700W... so I'm pretty sure not.