Dishwasher Won’t Start - Top 6 Reasons & Fixes - Whirlpool, GE, LG, Maytag & More
HTML-код
- Опубликовано: 12 июл 2024
- Dishwasher Won't Start? - Top 6 reasons and EASY DIY instructions to get your Dishwasher back to working order. For the full article, please visit: www.appliancepartspros.com/b/...
Reason #1 - These are electronic switches that have a button and wire terminals on each end and a set of contacts inside. This is located within the latch assembly, which is found in the control panel. If the dishwasher won’t start, it could be that the switch is faulty and the unit thinks the door is open, so it will not engage.
Hit that Subscribe button now and make sure the Notifications are ON.
Reason #2 - Thermal Fuse: Some electronic-controlled dishwashers have a thermal fuse that protects the control board. This is normally located on the top of the circuit board and includes two wires attached to the fuse. If this part fails, the board will not get power and therefore the dishwasher will be unable to start.
Reason #3 - Door Latch: The door latch assembly is responsible for keeping the door closed and uses the latch strike to secure the dishwasher door during operation. This part is located at the top of the door near the control board. There are several models and some will include just the latch, while others will include the latch strike and the door switches built into the unit.
Reason #4 - On/Off Switch: If the on/off switch on the dishwasher has failed, the unit will not be able to operate. These usually have a plastic body and wire terminals to hook up the electrical connections.
Reason #5 - Touchpad: The touchpad is used to make the cycle selections which then sends the signal to the control panel. It may be built into the console or sold separately. If the dishwasher won’t start, it could be that the contacts have gone bad inside the touchpad.
Reason #6 - Main Control Board: This is the electronic control board that is located in the console of the dishwasher. It is responsible for handling all of the electronic functions of the appliance.
The 'Top 6 Reasons Your Dishwasher is Won't Start' video covers all major brands of Dishwasher, including: Whirlpool, GE, LG, Maytag & More.
Since 1999, AppliancePartsPros.com has helped millions of people repair their broken appliances by providing high-quality original parts at well below retail prices, free tech support and troubleshooting, and award-winning customer service! We're open 7 days a week. Visit our site at www.appliancepartspros.com or call us at 877-477-7278. Over 90% of orders delivered in 1-2 days with guaranteed overnight shipping available! 365 days to return any part. Expert, friendly, US-based customer support team.
Facebook: /
DIY Repair Group: /
Twitter: / applpartspros
Don't forget to like and comment on this video, and subscribe to our channel! 
Хобби
Great video! When I went to remove the control panel to test the door switch, I noticed that the panel was a little loose. The plastic female anchors were all broken and therefore not holding the control panel tight. I tested the door switch since I had it opened and that worked. So I put longer screws in to better secure than panel. Running a test load now. So far , it's working. Will let you know if the lights start blinking again and it stops working.
Hello iam a maintenance technician and this info was very useful for me to complete work with some of the appliances that I wasn't too familiar with fixing thank you very much and keep up the good work
Very informative.
I have been hesitant to open the front panel because...well,...electronics. Thank you for making it seem so "easy." Any now I'm off to get one of those continuity thingamajigs. Wish me luck!
Have a blessed day!
I was able to find the problem in my wife's dishwasher, thank you for the video I appreciate it a lot!
You are very welcome!
Hey thanks a lot! Keep these videos coming!
You are very welcome.
good video
Great job thanks
Thank you! Glad we were able to assist you!
Matt is my hero.
I have a newer GE D/W that has gone blank but will run after the power is turned off for a few minutes and turned back on Thanks Jim
This video saved me a repair bill and/or the cost of replacing our dishwasher. Thanks, not all heroes wear capes!
Geat video
Very helpful
I have an older model GE natilus dishwasher with a timer and metal latch assembly. The problem I'm having is it will run for a few minutes then cut off. When it cuts off I have to unplug the washer and wait about 15 or 20 minutes then it will run again for a few minutes. Any ideas on what my issue could be?
My portable GE dishwasher won’t start. Several months ago I had the timer replaced. When it wouldn’t start, I checked the basics. Then my husband leaned over the washer to get some coffee and leaned down on the washer and it started. When he stood up, it stopped. I opened the latch compartment and there was a piece of paper in there. I removed it, put everything back together and the washer started. I worked for two loads and then it quit in the middle of the cycle. Now it won’t start at all again. Can something in there be loose? What should I do? Thank you in advance for your videos.
My dishwasher was not starting. Lights were on. Turn off circut breaker for a few second and turned back on. It now works. Reboot the computer first?
dishwasher cleaned but then it stopped at the end it would not drain and would not come back on. What you are demonstrating can those be my problem? I just didn't know if things like that just go when its still in a cycle
Same problem with my 2-year-old GE Profile.
The video mentions a "tech sheet". Where can you obtain this document?
child lock blinking on kitchen aid dishwasher. Tried pushing energy saving button for 5 seconds. Didn't work
and delay hours 2 light blinking,cancel light blinking
I try everything not working
😃
Cyle and start button won't compress
Be real . Hold the cancel or drain button down if you don’t have a reset button. Just like restarting a computer, hold the button down for a minute. That’s a restart
These videos are just general videos to give you ideas on what could be causing your issue. The cancel or drain button could work for your model, but other models that may not work for them and they may have to use a different method.
Thank you so much! I did that, and my dishwasher is working perfectly!
That worked for me too. Thanks for that easy fix. The troubleshooting guide in the manual didn't say to try resetting it, or even how to reset it...
My world pool dishwasher when I started the light just flashes and green light flashes doesn’t do anything else
same, what was the problem do you know
My whirlpool , the light turns on for 3 seconds when the start button is pressed then doesn’t do anything
@@annewestrup7440 We called someone to check it and it turns out that it had like a panel that had to be replaced and it would’ve cost more than to buy a new one so we ended up just scrapping it out and buying a new one. The panel was also out of stock for about three months.
nice
It's bad, dishwashers at all, I had one for Costco, before In 3 years broken down 6 times it's repaired and replacement most of parts but not working probably (water from kitchen sink go inside the dishwasher ) I paid for 3 years extending warranty with Allstate after 2 years manufacturer warranty Allstate refused repair
Don't buy this brand for every body