Работает, но не на100. Вбил их в косяк, начал к ним прибивать наличник, а он оказался куда тверже чем я полагал. В итоге гвозди утопились в косяк, но совсем не вошли в наличник и потом пришлось переделывать и засверливать. Лучше бы они были тоньше
To do a mar free casings of finer woods....no nail holes with putty...i hammer in #4 finish nail...cut off head and sharpen with dermal if u like but same install technique with a dab of glue
And the great thing is when you don't like it, it pulls straight off! Or if you knock past it. Or if you have kids. Or a dog. Or a fat missis. Or if you lean on it. Or just falls off by itself
It looks better for sure cause u don’t see the nail. But it will probably pop out easily or sooner than if done regularly. if someone hanging on it lol or if something hits it hard. The nail is on the inside and not going through the wood that’s closing the seal🤷♂️
You can buy plastic clips that go on both sides so if youbever need to gain access behind its easy with a tile suction cup and can go back exactly the same.
The tool you were using in the first half of the video to hammer the screw end in is actually meant as a power drill attachment to be able to screw in the screw side...
You’d HAVE to put some liquid nails on there. And by the time you do that you literally DONT need the nails. Shot won’t last for more then a year without it
Профи длинную часть гвоздя зажимают в шуруповёрт и в винчивают в отделочную планку, главное во время остоновиться,подготовленную отделочную планку окуратно прибивают.
Now pull that trim off because I know if you Hammer a screw into the wood you're pretty much tearing out that hole I think you're supposed to screw in the screw part and then hammer in the nail part
Genius hack?! The shallow wedge-shaped screw has grips on it, enough to work well enough when you're using a thin face board as shown here.. And it's less hassle than glue and pin nails. However a dab of glue on the screw might even make it childproof! ✨ 😉
Brand: Sekvira 5.0 5.0 out of 5 stars 2 120Pcs Double-Head Skirting Thread Seamless Nail, Skirting Line without Marks Nail,Invisible Security Screws,Equipped with Nail Specific Sleeve Tool,Solid Wood Baseboard Double-Headed Nails.
Так нельзя делать. Во-первых, крепление со стороны самореза держать уже не будут, такая обналичка продержится не долго, так как их с начало нужно вкрутить в обналичку, не переусердствуя. А потом только, в бить их в шкаф!
Тот же эффект от гроздика с отпущенной на втором этапе головкой. И в дальнейшем все можно снять без проблем неоднократно. Попробуй снять и поставить с эти шурупингом😅
Just what you need when you have no carpentry skills and just need it to last long enough for the home inspection
apply some glue to keep it in place.
The nail side was too long to use correctly. It would have broken through the end plate cover.😊😊😊
А почему саморез забивается? Может его сначала вкрутить надо, а потом гвоздь забить с другой стороны? 🤔 Я женщина, не могу без логики🤷🏼♀️
Supposed to screw in first then hammer in second side
Забитый саморез держится лучше чем закрученный отвёрткой гвоздь.
Classic: “nailed it”..
I always wanted my molding to fall of the first time I use my furniture 😊
ищем на озоне "гвоздь двухсторонний"
The combination of pin nails and glue should be perfect. Nails holds the facing board while the glue cures.
Работает, но не на100. Вбил их в косяк, начал к ним прибивать наличник, а он оказался куда тверже чем я полагал. В итоге гвозди утопились в косяк, но совсем не вошли в наличник и потом пришлось переделывать и засверливать. Лучше бы они были тоньше
Con clavos comunes que se le corta la cabeza es igual, así se gasta muchísimo menos
В исключении своевременного колебания, в виде деформации отдельных участков, может добавить клей по плоскости, чтоб задуманное держалось дольше.
Это не саморез, который нужно вкручивать. Если присмотреться, то там нет резьбы, эти грани предназначены для того, чтобы плотнее сидеть в ДСП
Соседи подумали, что это я молотком в час ночи стучу, а это всего лишь видео
Now that is really neat. I'll have to look for these at home deeepot next time I go
People don't realize that it you can merge them that easily you can separate them as easily
Удобные , незаметные крепежи.
Я мучился ,финишные гвозди забивал ,шляпки откусывал , все равно некрасиво , а это вещь.
To do a mar free casings of finer woods....no nail holes with putty...i hammer in #4 finish nail...cut off head and sharpen with dermal if u like but same install technique with a dab of glue
That looks sturdy.....
«Шуруп, забитый молотком, держится лучше, чем гвоздь, закрученный отверткой.»
And the great thing is when you don't like it, it pulls straight off! Or if you knock past it. Or if you have kids. Or a dog. Or a fat missis. Or if you lean on it. Or just falls off by itself
Seems great for fascia stuff. Just add glue if you don't want it to fall off.
Выглядит как билет в один конец, если разбор, то сразу на свалку?
Might be useful but glue and lamps will always be king for permanent facing.
短いな
ボンドとか、接着剤を併用した方が
良さそうですね
It looks better for sure cause u don’t see the nail. But it will probably pop out easily or sooner than if done regularly. if someone hanging on it lol or if something hits it hard. The nail is on the inside and not going through the wood that’s closing the seal🤷♂️
Каеой интересный крепеж.
И как он называется?
Фраза «Лучше вбитый шуруп чем закрученный гвоздь» заиграла новыми красками!😂
I love how on home improvement videos, everyone in the comments is a professional
Tiny bit of glue and some 23g pins works perfectly well, lasts loads longer, and isn't gonna split a piece like this likely will, but hey do you
Good idea, just don't mess up aligning the frame..... you only have 1 shot! 😃
Very interesting. Leaves no hole on the outside. I like it.
化粧的や仮止め的な部材であって正しい止めをして使うのはちょっと違うと思う。日本ではこれは通用しない。
しっかり表から奥の材を引き付けないと日本では数年後湿気で外れてくる(抜ける)恐れがある
А фабричная мебель соеденяется при помощи эксцентриковых стяжек.
Love the part where you used the screws
Мне одному кажется что он сделал всё наоборот надо было сначала вкручивать а потом набивать
You can buy plastic clips that go on both sides so if youbever need to gain access behind its easy with a tile suction cup and can go back exactly the same.
When working with painted trim , this is genius no nail holes , I'm going to suggest this to my custom cabinet shop .
Great. Now all the temu furniture will have this
Nice little invention for finishing trim. Obviously this was not designed to load applications.
If the tips of the nails are rubbed with wood glue, the boards may stick together more firmly.
Y con un poco de pegamento quedaría mejor. Muy buen trabajo. Excelente 👌
Buenísimos... Clavos de doble punta con tope al centro, como se piden o cual es su nombre correcto. 👍👍
Never saw these before.... interesting.
It could add bid of wood glue to help secure. Great idea
For all the experts out there, this aint for free-standing furniture. Its a fillet between the unit and the wall. Its not going to fall off.
Ок, для одного элемента пойдет. А если у тебя в день 3-4 таких сборки? Может проще пистолет использовать?
Does the resultant gap just look bad or does it also allow the trim piece to wiggle?
This Is a perfect example of Why is there always enough time to do it right the second time and never enough time to do it right the first time
WOW wontheful good job 🤔🧠
Thank you 😁
Неверное наоборот должно быть сначало вкручивать а потом забить😮
Вот грузчики офигеют от таких технологий 😂
Good job and idea
Обычно для этого используется Деревянный шкант (+ клей) для сборки мебели 😂
Я таких ещё не видела, возьму на заметку!
Maybe not screws, but ring shank on short end?
That's really smart
The tool you were using in the first half of the video to hammer the screw end in is actually meant as a power drill attachment to be able to screw in the screw side...
Забитый шуруп держится лучше, чем вкрученный гвоздь.
You’d HAVE to put some liquid nails on there. And by the time you do that you literally DONT need the nails. Shot won’t last for more then a year without it
What a cool little gadget! Genius!
In theory it could work well. Especially if you use enough, for something that is non structural
No glue? I give it 3 to 6 months before it falls off.
With glue and clamps, though, right?
Glue, at least?
Actually, these are very useful for adding short extensions to 4x4 fence posts...
AWESOME !!!
Отличная штука, чтобы быстро сдать работу клиенту... да и пофигу что через пару недель панель отвалится 😂
لقد مررت بهذه التجربه ولكن ماعرفت الحل ياليت عرفتها من قبل ولكن تعلمت شيء جميل شكرا
Можно еще добавить скотч двухсторонний)
Профи длинную часть гвоздя зажимают в шуруповёрт и в винчивают в отделочную планку, главное во время остоновиться,подготовленную отделочную планку окуратно прибивают.
На третьем кадре у нее уже ногти синие)
So you hammer a nail in cool then you hammer a board into a screw?
Everytime there's a video like these, everyone in the comment section suddenly turns into an expert with 80 years of experience.
FINALLY
ECO FRIENDLY WOOD VENEERS
Now pull that trim off because I know if you Hammer a screw into the wood you're pretty much tearing out that hole I think you're supposed to screw in the screw part and then hammer in the nail part
Какая клёвая штука👍
Should also used glue for extra strength.. if it comes loose it will be junk
Show us the plywood where you actually practiced it
Как же у вас держится забитая, винтовая часть крепления в ДСП?
Шляпа это всё. Целяком и полносьтю. Этого наличника хватит ровно до первого мезинца😂
Excelente Idea wow
Genius hack?!
The shallow wedge-shaped screw has grips on it, enough to work well enough when you're using a thin face board as shown here..
And it's less hassle than glue and pin nails. However a dab of glue on the screw might even make it childproof! ✨ 😉
I’m wondering where you purchased the Fastners please
Brand: Sekvira
5.0 5.0 out of 5 stars 2
120Pcs Double-Head Skirting Thread Seamless Nail, Skirting Line without Marks Nail,Invisible Security Screws,Equipped with Nail Specific Sleeve Tool,Solid Wood Baseboard Double-Headed Nails.
@@sdmerrick2688
Быстро, удобно для строителя, не долговечно, вспоминать потом строителя будут самыми не добрыми словами😊
I like this new furniture from IKEA
Что лучше держит,забитый саморез или закрученый гвоздь?
So it leaves a tiny gap by design of the fastener. Is that ok? Does it look ok?
При разборе мебели будет весело 😂😂😂
Cool, temporary carpentry. Nice!
Так нельзя делать. Во-первых, крепление со стороны самореза держать уже не будут, такая обналичка продержится не долго, так как их с начало нужно вкрутить в обналичку, не переусердствуя. А потом только, в бить их в шкаф!
Тот же эффект от гроздика с отпущенной на втором этапе головкой. И в дальнейшем все можно снять без проблем неоднократно. Попробуй снять и поставить с эти шурупингом😅
Наверное сначала нужно вкрутить резьбу... А потом прибивать?
I love these life hacks. They teach me to purchase a special fastener then use the fastener for its intended purpose.
Т.е., предполагается, что этот шкаф никогда не надо будет ни разбирать, ни двигать?
Где купить ?
NAILED IT.📡🇺🇸👽
素晴らしい技術です
打った木の面がピッタリと合ってる
個のパターンは、合わなくて焦る事が衆いのですが
釘も切って使うより、打ち込み易いのかな?
Clever but I still prefer a finishing nail and a bit of filler for the tiny hole it leaves.
Как называется?