Just replaced the HPFP on my 11 SRX has the same V6. Went smooth the only issue I had was the bottom bolt I had to use a 1/4 in 10 MM with a swivel extension and a 1/4 to 3/8 adapter to use a 3/8 ratchet to bust it loose and to tighten it. Tried two 3/8 swivels and both were too big or didn’t swivel the correct way.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
When you say flat spot what exactly are you referring too
Is it gonna take me a little over 16 mins to replace it as well ? 🤣
Can you help me out and tell me where to find the fuel filter on the 2010 Cadillac SRX
Just replaced the HPFP on my 11 SRX has the same V6. Went smooth the only issue I had was the bottom bolt I had to use a 1/4 in 10 MM with a swivel extension and a 1/4 to 3/8 adapter to use a 3/8 ratchet to bust it loose and to tighten it. Tried two 3/8 swivels and both were too big or didn’t swivel the correct way.
Is there another fuel pump in the tank
Can I just use a wrench to tighten bolts to be tight or do I have to have a torque? @trq
Thank you great video
Could my vehicle still start but die out seconds after starting from a bad pump like this?
Why does it have to be on the flat if it wasn't already?
Thank you!
+Steve Thanks for watching our video! 1aau.to/m/Shop-TRQ
I drive a 2010 srx and the way you started it and it took a little bit that happens every time i put gas could it be because of the fuel pump?
Check purge valve
Should explain that this is the HPFP and that there is also one in the tank.
Dose a bad fuel Guage still moves?
Where are you located?
Thanks......