Before people replace the sending unit, clean the contacts from the swing arm. If it's clean and still have issues, it may be the instrument cluster. G35 clusters are notorious for malfunctioning lights and gauges. I had to get my cluster fixed because of the incorrect fuel gauge level and lights were blinking randomly.
@@modiddly1663 tanin auto electronix. The reason why I went with them is because they fixed multiple cluster problems (dim lights, turn signal, etc). Other places will only fix the fuel gauge problem. To all g35 owners, your instrument cluster will start to malfunction. I don't know one g35 owner who didn't have this issue. So if your going to get it fixed, get it all fixed while it's out. Save time and money in the long run.
Zepper2019 how much did this cost you? I been researching thankfully I didn’t buy nothing yet and honestly you hitting all the problems I’m having now! That would have been the last thing I would have thought
Having this exact issue, replaced my fuel pump and sending unit... still stays stuck at 3 quarters full. The cluster seems to work as well because when i unplug the sending unit and power on the car, the cluster shows empty. No idea what can it be. As a test i also installed the driver side sending unit at 180 degrees and still the same readout. I'll put it back to normal today.
I replaced the fuel pump with the sending unit on the passenger side of my 06 coupe. This didn’t work, so I sent my cluster out for repair and they claimed they repaired it with passing tests but still no results. Is my next step replacing the other pump on the drivers side? I didn’t know there was 2 units before shipping the cluster out
@@dannyjohnsonsgarage ok thanks for the prompt reply...I read the other comments about cleaning the unit first to see if it fixes the issue so I canceled my order for now.
@@MrCato101 I cleaned the sending unit on the passenger side and replaced the fuel sensor on the drivers side but still having issues with gauge stuck on full and service code P0462. My trip counter also failed and stayed on zero. I think now I need to remove the cluster and send it out for repair
@@tampicobruhh5862 No sir have had the problem since I bought the car. Going to try and replace fuel sensor on driver side first. Do you have the same check engine soon light? Or is ur meter just not working correctly?
Can the car turn off because it believes it doesn't have gas but in reality it does and it's just a sensor/part that's relaying bad information or not working properly?
Danny, does the G-35 sedan fuel pump assembly include the driver’s side sending unit or are they sold separately? Did you find a replacement sending unit? I had the passenger side sending replaced years ago but it didn’t fix the innaccurate fuel readings.
Heyy I have a 2012 Camry.. last week i hit a huge rock under my car and I noticed that it hit the main arms under my car and made scratches and nothing major. However, when I went to get gas, I noticed the same problem u have with my fuel gauge. My fuel meter wont go full. Do you think I’m having a similar issue with you? Or my gas tank has a dent? I’m hoping I don’t have to change the whole tank. Maybe sending unit due to the impact? Any thoughts will be appreciated!
Yeah, it could have broken the sending unit or like you say dented the tank. If it’s not leaking and it still goes to empty properly it may be fine. I’d take it to a shop for them to look it over
I have the same problem rn with my car. Honestly I’m tired of it & bout to sell the pos. It’s become a moneypit ever since I bought the damn thing lol. Huge mistake buying one.
Before people replace the sending unit, clean the contacts from the swing arm. If it's clean and still have issues, it may be the instrument cluster. G35 clusters are notorious for malfunctioning lights and gauges. I had to get my cluster fixed because of the incorrect fuel gauge level and lights were blinking randomly.
Zepper2019 where do you get it fixed I’m having that issue now
@@modiddly1663 tanin auto electronix. The reason why I went with them is because they fixed multiple cluster problems (dim lights, turn signal, etc). Other places will only fix the fuel gauge problem.
To all g35 owners, your instrument cluster will start to malfunction. I don't know one g35 owner who didn't have this issue. So if your going to get it fixed, get it all fixed while it's out. Save time and money in the long run.
Zepper2019 I have a check engine light on for p0642 low input fuel sensor, should I replace this unit? Replaced fuel pump no luck still light on
@@justint6743 The fuel pump wouldn't normally trip this code. So it could be the sensor, ECM or short circuit in your wiring.
Zepper2019 how much did this cost you? I been researching thankfully I didn’t buy nothing yet and honestly you hitting all the problems I’m having now! That would have been the last thing I would have thought
Thanks it worked for my friends car. Saving people $$
Having this exact issue, replaced my fuel pump and sending unit... still stays stuck at 3 quarters full. The cluster seems to work as well because when i unplug the sending unit and power on the car, the cluster shows empty. No idea what can it be. As a test i also installed the driver side sending unit at 180 degrees and still the same readout. I'll put it back to normal today.
It most likely is the gauge cluster. Mine alway showed full ruclips.net/video/4sfMkMLO4zo/видео.html
I replaced the fuel pump with the sending unit on the passenger side of my 06 coupe. This didn’t work, so I sent my cluster out for repair and they claimed they repaired it with passing tests but still no results. Is my next step replacing the other pump on the drivers side? I didn’t know there was 2 units before shipping the cluster out
Yes. There is a pump on the passenger side and a sending unit only on the driver side
I have the same problem with 05 G35x..just ordered the sending unit part from amazon hopefully it'll fix the issue. Thanks Danny!
Mine must be on the pump which is hard to find on sedan models, or the cluster
@@dannyjohnsonsgarage ok thanks for the prompt reply...I read the other comments about cleaning the unit first to see if it fixes the issue so I canceled my order for now.
I just bought a 05 G35x today and i found out mine doesn’t show when the gas is low.. gonna try to clean it as well
@@ArnelBueno how did it come out cause I’m having the same issue with a G35 X Sedan where the gas reads full most of the time
@@MrCato101 I cleaned the sending unit on the passenger side and replaced the fuel sensor on the drivers side but still having issues with gauge stuck on full and service code P0462. My trip counter also failed and stayed on zero. I think now I need to remove the cluster and send it out for repair
Yesterday, I replaced the fuel pump because I thought it’d fix the gauge, but it didn’t. Could it be the sending unit?
It’s most likely the cluster itself. The engine light says it’s the sending unit but it’s not ruclips.net/video/7HKe4pnIZ40/видео.html
Was this an OEM Aftermarket or non OEM Aftermarket?
Bud if it’s OEM it’s not after market
I’ve had this problem for a year now and the engine light just turned on me yesterday. Has left me stranded twice. Time to replace the sensor
Got this one rn man. Any luck ?
Fr any luck yet?
@@tampicobruhh5862 No sir have had the problem since I bought the car. Going to try and replace fuel sensor on driver side first. Do you have the same check engine soon light? Or is ur meter just not working correctly?
@@Luvsfabbed meter isn’t working properly. Also I had to switch out a few fuses. Thanks for answering very cool of you
Same here. Been putting this off to damn long! 13 g37x
Can the car turn off because it believes it doesn't have gas but in reality it does and it's just a sensor/part that's relaying bad information or not working properly?
No, it will still run unless it runs out of gas
Danny, does the G-35 sedan fuel pump assembly include the driver’s side sending unit or are they sold separately? Did you find a replacement sending unit? I had the passenger side sending replaced years ago but it didn’t fix the innaccurate fuel readings.
The sending units are sold separately, and after replacing both it ended up being the cluster ruclips.net/video/aMnpWTkiH-A/видео.html
Heyy I have a 2012 Camry.. last week i hit a huge rock under my car and I noticed that it hit the main arms under my car and made scratches and nothing major. However, when I went to get gas, I noticed the same problem u have with my fuel gauge. My fuel meter wont go full. Do you think I’m having a similar issue with you? Or my gas tank has a dent? I’m hoping I don’t have to change the whole tank. Maybe sending unit due to the impact? Any thoughts will be appreciated!
Yeah, it could have broken the sending unit or like you say dented the tank. If it’s not leaking and it still goes to empty properly it may be fine. I’d take it to a shop for them to look it over
@@dannyjohnsonsgarage thank u!!
What prompted you to only check the unit behind the driver??
I purchased it as a replacement. The driver side is hard to find for a sedan. Still needs a driver side or the gauge bezel can be bad
Danny Johnson’s Garage okay thank you. I’m currently dealing with this issue which is why I asked. Either way, thank you for that video.
Paul Rosemond Any luck? I’m currently dealing with this and the Ses light
Henrry Hernandez Not yet. I have yet to try this. I’m hoping for this weekend.
Have u posted the vid for the passenger side yet
I have the same problem rn with my car. Honestly I’m tired of it & bout to sell the pos.
It’s become a moneypit ever since I bought the damn thing lol.
Huge mistake buying one.
Always disconnect the battery first!!!
I keep failing emissions because of code “P0462, Fuel level sensor A circuit low” can anyone help?
i have the same code imma try to swap both of the sensors and the fuel pump fuse
I have the same problem but im swapping out the fuel pump and sensors
@@chino8002 how did it go? I’ve watched videos of people just cleaning the sensors and it working fine.
@@gagan2929 i swapped it out and was clean for about a week but then code P0181 is popping up for me.
@@gagan2929 but swapping out the whole pump with sensors will get rid of code p0462
How much??
I would look at the gauge cluster too, but otherwise it’s about $100 per sending unit ruclips.net/video/7HKe4pnIZ40/видео.html