Author here accurately points out that the COMMONEST issue is the 'take' up of the edge of the paper between the lower (Blk) rollers, and the upper (Wht) rollers; and goes on to creatively 'tightens' the load on the Bk rollers. HE LEAVES OUT that it is actually the 'UNCLEAN' Wht rollers (difficult to access), that the physics of the initial paper pick-up that is failing. ACCESS these rollers (open the top), open/shut lower door to 'cycle,' and clean them with alcohol-sharp edge (knife. chisel) and THEN see it you clear the ongoing issue.. BEFORE his technique is engaged. [CLEAN/scrape the White rollers fist!]
sir pano po pag ang paper jam nasa ilalim ng drum unit naka pag full print sya pero di sya kinakain pa taas para mag feed. tapos yung print nabubura pa kasi di pa dumadaan sa heater.. thanks in advance sir.
Not understanding your language, but watching you do something to clear a paper jam, made me do the same, and fix my machinen. Thank you.
Galing mo sir..nice job!
Keep watching and support from Al Khafji Saudi Arabia 👍
muito bom
very useful tip,thanks for sharing 👍
Author here accurately points out that the COMMONEST issue is the 'take' up of the edge of the paper between the lower (Blk) rollers, and the upper (Wht) rollers; and goes on to creatively 'tightens' the load on the Bk rollers. HE LEAVES OUT that it is actually the 'UNCLEAN' Wht rollers (difficult to access), that the physics of the initial paper pick-up that is failing. ACCESS these rollers (open the top), open/shut lower door to 'cycle,' and clean them with alcohol-sharp edge (knife. chisel) and THEN see it you clear the ongoing issue.. BEFORE his technique is engaged. [CLEAN/scrape the White rollers fist!]
Thakyou very much!!!!
Sorry.. i dont understand.. plz share in english
❤❤❤❤❤❤
Bro, baka may alam ka mabibilhan ng heating filament ng dcp-6075. pundido na kasi yung sa akin. thanks!
baka po unh tinutukoy mo, dcp-7065dn, ung hollowgen po b tinutukoy mo ung sa loob ng upper fuser roller?
meron po aq nun, pm mo aq sa fb page q po, fbpage:solidtech express
@@myrj10 PM na kita sir.
7500d rear paper jam solution??
wala pong jam na papel pero palaging jam rear
baka po ung sensor ng rear nyan may problem
sir ano po tawag sa parts na may kulay blue sa likod kase nabali po kasi ung para sa sensor nya meron po ba mabibili n pyesa nun?
marami samin gnun po, send k message s fb page qpo: solidtech express
sir pano po pag ang paper jam nasa ilalim ng drum unit naka pag full print sya pero di sya kinakain pa taas para mag feed. tapos yung print nabubura pa kasi di pa dumadaan sa heater.. thanks in advance sir.
E check mo ung fuser mo qng maus nmn ung ikot, ppwd mo xa buksan s likod para macheck mo, kc sabi mo hind pumapasok s fuser ung papel.
@@myrj10 yes sir di pumapasok tapos maingay yung gear.. pero nung tiningnan ko yung mga gear ok pa naman mga ngipin nya..
Idol pag sa ilalim Ng drum nag jam,anong problem,pero tinesting ko saibamg unit Yong drum cart ok naman
Message kpo s fb page q solidtech express
Kpg sa ilalim ng drum need mo malaman san nag stop ung taas ng papel
Boss tanong lang po paano linisin ung salamin ng brother L2540may ipis po kasi sana makagawa kau ng video na step by step po
meron po tau video nyan dto s channel n to po
ruclips.net/video/kDZ5FGgF8qk/видео.html
yan po link s reply q s baba🙂🙂
Saan ang shop nyo sir
QC
😢😢😢