Thank you very much! I have experienced a permanently rear jams on my Brother printer and after I watched your video and cleaned the rubber rollers by a q-tips with an alcohol this fixed the problem!
omg! thank you so much! I was going to throw the printer out...I already bought a new one. you are amazing! totally appreciate it!!! I used a toothbrush!!
My printer rollers were not gummed up, but I did lift the lid as shown and then blew out any dust with "ultra duster" spray, then ran a test print in the sequence that Abraham suggested ...and it worked. The MFC L2740 is a great printer and no problems with it until now, so thanks Abraham for saving me repair costs or having to get a new printer ! 👍 😊
Thank you! Following your directions it took 49 seconds to locate the tiny piece of paper that was stuck . And back in business. Thanks again after looking all afternoon, 49 seconds to locate and fix! RD in Boca
I did on my MFC L 2700dw, Same problem, I followed your instruction and cleaned all three rollers and now it is not jamming, Thank you so much for helpful vdo
It doesn't matter smoking or not, the fact is for this kind of mechanism cleaning the rollers fixes the problem. Thanks for sharing after cleaning rollers with alcohol the printer works flawlessly.
I could see where the paper was jamming lay, but not why. There seemed no obvious problem. I was just about to press the "buy" button on a new printer, when I thought I'd have one more look on the internet for solutions and came across your video. I used alcohol on cotton buds and it now works again. Many thanks indeed!
Brilliant, every internet search I did kept leading me to open the back, clear the crinkled Jam. This one actually helped and worked. Thank you so much.
Thank you! Every single page was curled, now the problem resolved. I've used your method with the knife and I've used also a cleaning with alcohol, as suggested in comments.
Thank you for this. I used your method with alcohol for years now but it recently got worse where i had to do it every week. My next test is with Wd-40 on a paper towel, so far it is working, but will see how it holds up over time. I also ordered the roller part from ali express for about $10 and the rear roller for $5. This printer is awesome, my page count is over 60,000! I live outside the usa so to buy new would cost $350. I also hate throwing stuff in the landfill if I can fix it.
Helped me a lot, thanks, I have Bother MFC-2700 DW printer, with similar structure and I scratched the rolling rubbers as displayed in the video, and cleaned with Alcohol and the papers start rolling out. before, they were constantly stuck all the time.
Thanks! I fixed mine with alcohol on a lint free cloth. Held it against the rollers while they spun with your door trick. I also cleaned the rollers in the rear with alcohol. So far so good
Well, wow, wow wow! I am like the most unhandy man on the planet. This printer cost me $300 five years ago. I don't print a huge number of pages a year, used mostly for scanning. Cost to send the MFC back to Brother for service would run $100 with transportation. OR buy a new printer. Didn't like either option. Bangkok is a big, dirty city. We don't smoke but we leave the printer covered with a cloth. The knife/scalpel approach is hard. After this, I used a microfiber cloth soaked in 99% alcohol. Just to make sure, I used cotton buds in alcohol, opened & closed the door many times. The danger, I would think, is getting little bits of cotton lint caught in the works. SUCCESS! (So far, so good.) However, if the rollers are that grimy, there must be dust deposits deeper inside the printer. THANK YOU!
@@Itsbk999 Watch the video again. This is part of the printer startup series. Just crack that front door & the rollers will roll for just seconds. You'll need to do it multiple times.
Thank you very much! I have experienced a permanently rear jams on my Brother printer and after I watched your video and cleaned the rubber rollers by a q-tips with an alcohol this fixed the problem!
I used alcohol and then WD-40. Worked perfectly. Customer service did not help one bit, even though I called them 3 times.
omg! thank you so much! I was going to throw the printer out...I already bought a new one. you are amazing! totally appreciate it!!! I used a toothbrush!!
My printer rollers were not gummed up, but I did lift the lid as shown and then blew out any dust with "ultra duster" spray, then ran a test print in the sequence that Abraham suggested ...and it worked. The MFC L2740 is a great printer and no problems with it until now, so thanks Abraham for saving me repair costs or having to get a new printer ! 👍 😊
Thank you! Following your directions it took 49 seconds to locate the tiny piece of paper that was stuck . And back in business.
Thanks again after looking all afternoon, 49 seconds to locate and fix!
RD in Boca
I did on my MFC L 2700dw, Same problem, I followed your instruction and cleaned all three rollers and now it is not jamming, Thank you so much for helpful vdo
Holy crap, this is literally the only video on RUclips that fixes my problem. Thank you!
It doesn't matter smoking or not, the fact is for this kind of mechanism cleaning the rollers fixes the problem. Thanks for sharing after cleaning rollers with alcohol the printer works flawlessly.
I could see where the paper was jamming lay, but not why. There seemed no obvious problem. I was just about to press the "buy" button on a new printer, when I thought I'd have one more look on the internet for solutions and came across your video. I used alcohol on cotton buds and it now works again. Many thanks indeed!
Brilliant, every internet search I did kept leading me to open the back, clear the crinkled Jam. This one actually helped and worked. Thank you so much.
Thank you! Every single page was curled, now the problem resolved. I've used your method with the knife and I've used also a cleaning with alcohol, as suggested in comments.
Thanks for helping me fix my Brother L2700dw printer. Now i do not have to buy a new one. :)
Thank... my printer facing same issue and after watch this video, I followed the step and its work. Thanks very much for helping and sharing
It worked(used lint free cloth like someone else suggested instead of a knife + soaked in a bit of alcohol)!!! Thank you!!!!!!
Thank you for this. I used your method with alcohol for years now but it recently got worse where i had to do it every week. My next test is with Wd-40 on a paper towel, so far it is working, but will see how it holds up over time. I also ordered the roller part from ali express for about $10 and the rear roller for $5. This printer is awesome, my page count is over 60,000! I live outside the usa so to buy new would cost $350. I also hate throwing stuff in the landfill if I can fix it.
Hi great solution. I tried many things including different paper types. Nothing helped until I saw the advise clip. thanks a lot.
Good advice. Solved my constant jamming problem on DCP 7065DN (the jam occurred after EVERY printed page)!
Wow a two minute fix Fantastic Thought it was exposure to damp cold air and was ready to ditch the printer until I tried this
Helped me a lot, thanks, I have Bother MFC-2700 DW printer, with similar structure and I scratched the rolling rubbers as displayed in the video, and cleaned with Alcohol and the papers start rolling out. before, they were constantly stuck all the time.
Omg, this hacks helped. Was about to dump my printer when I saw this vid. Thank you
Thanks! I fixed mine with alcohol on a lint free cloth. Held it against the rollers while they spun with your door trick. I also cleaned the rollers in the rear with alcohol. So far so good
Thanks for showing us how to fix it. My is jammed but working after using your method.
Thank mate, now old people of my office thinks I am a hacker 😂
Good Video. I almost threw away my printer. Worked for now so fingers crossed.
You're our hero! Thank you for this tip!
Well, wow, wow wow! I am like the most unhandy man on the planet. This printer cost me $300 five years ago. I don't print a huge number of pages a year, used mostly for scanning. Cost to send the MFC back to Brother for service would run $100 with transportation. OR buy a new printer. Didn't like either option.
Bangkok is a big, dirty city. We don't smoke but we leave the printer covered with a cloth. The knife/scalpel approach is hard. After this, I used a microfiber cloth soaked in 99% alcohol. Just to make sure, I used cotton buds in alcohol, opened & closed the door many times. The danger, I would think, is getting little bits of cotton lint caught in the works.
SUCCESS! (So far, so good.) However, if the rollers are that grimy, there must be dust deposits deeper inside the printer.
THANK YOU!
İt definitely worked and my problem was solved. Thank you very much 🙂
Thank you for the video, i've repaired mine!
Mine has done this since first month I bought it. Had an earlier version and never jammed.
subscribed - thank you, this solved the problem!
Brilliant advice which worked perfectly, thanks for making the video!
Fixed my problem! Thanks
It Works! Thank you! Alcohol did'nt help. Knive helps.
Thanks a lot! you saved my life!
Thanks so much!!! It worked perfectly!!!!
I solved the problem by using a qtip with alcohol, then applying WD-40.
Thank you very much! It really works for me.
Love you, pal, your video give me a new used printer! haha
Thanks, it's working fine !
Nice, thank you
It works! knive tecnical! thanks
that area can not possible accumulate enough dirt to jam the paper. - it's in the roller
Super helpful
Amazing! Thank you.
It's working thanks for solution
thank you so much
alcohol would do the job or even better roller rejuvenator. No need to use knive, these rollers just need proper cleaning the get better grip
very thanks bro, heartly
thank you for sharing!
Good one thanks. Able to get a bit more life out my printer!!
Thanks
I used sandpaper (grit 800)
thanks sir
##$$
Thank you very much! It really works for me.
What if my scanner says jammed when there no paper
Thank you
🏆
Mere pass dcp 2541 hai isme both side paper ata hai sir pls sol
It worked 😁
what is the name of part
i still didnt get it . how do u make the rollers roll ? my printer doesnt allow to roll or maybe i dont know how to
Yes i have the Same Problem
@@Itsbk999 Watch the video again. This is part of the printer startup series. Just crack that front door & the rollers will roll for just seconds. You'll need to do it multiple times.
Kindly help me fix our printer please...
Brother DCP-T720DW
Macine Err 7E00
MFC L-3710 CW
Jam Tray 1
No paper jam
Mine is jamming so bad and nobody smokes in my house
Were u able to fix it? S
NO HELP AT ALL.
No offence but I think you may not be doing it right. Try the alcohol & fine-grit emery paper techniques, or my Q-Tips, as mentioned above.