How To Fix Crumpled Paper Jam Issue on BROTHER Laser Printer

Поделиться
HTML-код
  • Опубликовано: 10 дек 2024

Комментарии • 14

  • @jpooch00
    @jpooch00 9 месяцев назад +4

    I did this and now my printer works as good as new. Many thanks!

    • @303electronics
      @303electronics  9 месяцев назад

      You're welcome! Thank you very much for sharing. I'm glad it worked for you!

  • @anthonyd.2518
    @anthonyd.2518 3 дня назад

    Thanks voor your great advice. It works for me after cleaning the rollers of my Brother laserprinter.

  • @julienguyen4334
    @julienguyen4334 11 месяцев назад +1

    Thank you so much !!! I fixed the paper Jam problem in 10 minutes.

    • @303electronics
      @303electronics  11 месяцев назад

      Good work! Thank you for the feedback. Have a great weekend!

  • @Cisfran_della_Sarthagada
    @Cisfran_della_Sarthagada 9 месяцев назад +1

    Thank you very much, this was exactly what I needed

    • @303electronics
      @303electronics  9 месяцев назад

      You're welcome. Thanks for the feedback. Have a great day.

  • @CommentsAllowed
    @CommentsAllowed 4 месяца назад

    I have an old Brother printer that jams and crumples papers all the time. I cleaned it a bit and it was better for a day. I definitely need to do a more detailed cleaning of it.
    Either it is not gripping the paper well enough, or there are rollers not spinning freely enough.

  • @kings7man
    @kings7man 2 месяца назад

    can you use metho on a cotton bud

  • @cyx92
    @cyx92 5 месяцев назад

    Just saying Sometimes the printer will jam regardless of cleaning dew to one of the "lower plastic" rollers not making contact with the "top rubber" rollers they are supported by a spring so what you can do is wedge a piece of paper underneath the plastic roller that isn't making contact to give that added tension
    **just enough but not too tight

  • @mysticrose379
    @mysticrose379 19 дней назад

    This did not fix the problem. It seems like the printer is too hot. Any other videos that might address this issue?

  • @GMOFFROAD
    @GMOFFROAD Год назад +1

    Мастер фломастер

    • @303electronics
      @303electronics  Год назад

      Thank you, kind sir! I really appreciate your feedback! Have a great voskresenie and a Merry Christmas!😁🌲🎄🌲🎄🤶🎅