Dude you should watch sreten from M539 Restoration he has an insane amount of useful information in both brands and quality components on parts. And just has pretty in depth videos on service jobs with torque specs and procedures. He links special tools or parts manufacturers as well
Funny I was thinking about streten while watching you jumping right into the bearing job. When he did it he stressed over it so much and was so particular. Both methods seem to work
Pro tip: When you put the Vise Grips on the hood strut, angle them towards the center of the engine compartment. That way, if/when the hood does come down on them, you won’t now need to repair the fender. Another Pro Tip: Just get new struts. They are $20.
Just watched another car repair YT that had a small plastic screw-clamp for just this problem. They said now they assume ALL struts will sag and drop. They showed a damaged BMW hood from an engine support bracket after the hood dropped.
This is a great distraction from the 997. I love both directions and can't wait to see more. The production quality is great, it is instructional AND entertaining.
Doesn't look like spun bearings, and they don't look bad at all in general for that generation of BMW V8's and V10's. Nice work, keep it up! Fun fact: I did motorsports photography for Turner a while back, Will and the team are awesome people!
The power steering fluid is the wrong kind. It should be the same you used for the Porsche CHF11S. That could be your sound. Those reservoirs also have a non serviceable filter. I would get a new one, flush all the fluid, and hope your pump is not hurt.
It always amazes me (in a bad way) how clapped out many ///M BMWs end up over there in the US. Seems like couple owners in people who really can't afford to run and maintain them (the way they should) get their hands on these and give the brand its bad rep. Its just amusing (also not in a good way) how much shit people talk about RELIABILITY when they put zero maintenance into a car.
"At least the engine didn't blow up" 🤣🤣. I feel the same way after every time I drive my e90 M3. I've enjoyed the P car stuff but excited to see these updates!
Belt/tensioner are known to make wild noises when on their last legs. You might want to double-check the oil filter housing gasket as those are known to leak. At this point? Water pumper and thermostat might as well be swapped while you’re there.
I gotta say I prefer the substitles on this video as supposed to the last one, it felt less like idiotic short form content made to be watched with no volume or a song in the background (say... tiktok for example) and more like something to aid people who are in a loud space when you aren't talking clearly for one reason or another, or who have lost their attention span to aforementioned types of media lol. Enjoying this car, I was actually thinking I would love to have one of these for both a project car and eventual daily driver, which from me is saying something since at the moment I really wouldn't consider buying much. Either way, thanks for the great vid!
9:06 always put a little bit of silicone on both sides of the gasket and the seams of the metal parts, tighten the bolts of the pan a little,wait 15 min tighten them completely. Don’t fill with oil just wet ,wait a few hours (a night if you can) and then put the oil and start the engine and you will have no leaks. On this German vehicles there are always leaks so I find that method successful. I love the works you do keep pushing on it .🤙🏻
I would Check the power steering pump. Spin the wheel a couple of times from side to side and hold it there for like 3 seconds. That could fix the sound youre hearing. It sounds like you have air in the system of the power steering.
Matt, just in case you will decide to drop the transmission and do the clutch, I wanted to note a few things from my experience. Ive dropped the transmission twice in last 3 months on my E92 M3 (on jackstands - no fun :). What Ive struggled with the first time is the separation of the tranny from the engine. You will learn that you have to manipulate the angle of transmission while it is separating from the engine in a certain way. My struggle was the last 3-5mm of input shaft clearance out of the clutch cover pins - it was just not clearing. In the end what I have done is just give it a hard push towards back it it popped out. You might know all that already but in any case.... Also, Ive been following your work for a while. I have E36 M3 that is receiving an LS2 currently. Gathered a lot of great info from your E36 project. Thank you very much for that. Good luck
Love that. M3 slow but sounds sooooo good that’s my dream car ecs supercharge would make it really fun my boi has it on his car not super fast but it’s fun car🏎️💨💨💨
@@johnniek72 I think we are not comparing apples to apples. Not only in knowlegde and tools... but in love for these machines (BMWs and Ms specifcically). On one side Matt Ross refers to the car as a disaster and nightmare. He clearly doesnt like the platform and does not see other potential except you tibe content. On the other hand, Sreten does love BMWs and does not cut corners (unlike Matt) and imagines the final result and the joy he will be having along the journey. Instead, Matt seems in pain. It is the same pattern he showed with his Porschas, the 996 and 997. For a true fanatic, some things Matt does are heretic but entertaining nonetheless.
You can bet someone had been thee before you to replace rod bearings after some had spun and they decided to put the new bearings in an send it hoping for the best (or hoping to get rid of it FAST and let the next poor suck deal with it)!!
Great to see you branching out to try other brands Matt, albeit another German brand. Great content as always, been a fan of this channel from the off.
as an observer...Your workshop is uninspiring....dirty. You don't clean parts before replacing them on the car. At around "10:00 " you should have lowered the hoist a foot or two. The cross member is filthy. If the slave cylinder and new serv ice line leak then they are an incorrect match in fitting or wrong thread. Bearing shells can't spin on one half only. Use well plaed small cable ties to hold your sump gasket to the pan while replacing sump. Did you clean the sump inside?....you didn't outside. Don't use vyce grips on any polished shaft..as you did with the bonnet. struts......use the correct and special clamps. Overall...? I wouldn't allow you to work on my BMW's or actually any car...you are not houseproud...
Hey, Matt love you showman longtime watcher. I'm a youtuber myself. I have a channel called, fix it, Daniel, and I was wanting to ask you. Where do you get your music from? That's not copyrighted and that you use on your channel. Cause I wanna use music like you're using but I keep getting hit with a copyright. Could you help me out from one? You two a next so where you go and use to use your music
Those Bearings aren't 'spun' ...They're just worn out. A spun bearing literally spins in the Rod Big End ...and comes out paper thin from all the rotation of the rod & crank.
@@matt13ross damn, I'm not saying it was, but the torque wrench might be out of spec. A rod bolt stretch gauge would have been helpful here to confirm that all rod bolts were torqued properly
Just out of curiosity, did you pay for the parts from ECS, or are they sponsored? Only reason why I'm asking is I'm trying to help save you some money if you're coming out of pocket. I used to go through ECS for all my stuff, but I found some better places that's cheaper, and are actually genuine parts.
@matt13ross damn lol, i feel your pain. Try this, find what you need on ECS, then copy the MFG#, and paste it on google. There's a specific site that has the parts cheaper, but RUclips keeps deleting my comment, and won't let me post the place.
@matt13ross welp, once again I've tried like 10 times to help you out and give you a place to purchase that stuff for cheaper that's genuine parts. But RUclips keeps deleting my comments. 🤷♂️
Matt, to try to chase down that noise ...remove the Accessory Drive Belt, and start the engine, don't run it for long as you aren't spinning the Water pump. If you have an idler or any Accesry drive items that have bad bearings, the noise should cease. Good luck Buddy, you got this!
No plastigauge to check clearance? Better to be safe than sorry. What kind of bearing did you use ACL, BE?
I also was wondering why he didnt use plastigauge😳
Dude you should watch sreten from M539 Restoration he has an insane amount of useful information in both brands and quality components on parts. And just has pretty in depth videos on service jobs with torque specs and procedures. He links special tools or parts manufacturers as well
The amount of money he dumps into his builds is pretty crazy, results (combined with his meticulous work) speak for themselves tho, absolutely.
He's way more detailed than me lol.
@@matt13ross when you put that dirty oil pan back up, without pressure washing it at least, i cried a bit.
Funny I was thinking about streten while watching you jumping right into the bearing job. When he did it he stressed over it so much and was so particular. Both methods seem to work
@@xile321 comment aged like milk
Pro tip: When you put the Vise Grips on the hood strut, angle them towards the center of the engine compartment. That way, if/when the hood does come down on them, you won’t now need to repair the fender.
Another Pro Tip: Just get new struts. They are $20.
Just watched another car repair YT that had a small plastic screw-clamp for just this problem. They said now they assume ALL struts will sag and drop. They showed a damaged BMW hood from an engine support bracket after the hood dropped.
Good point haha
@@MrJbipes Was it from Jamie's garage?
This is a great distraction from the 997. I love both directions and can't wait to see more. The production quality is great, it is instructional AND entertaining.
Doesn't look like spun bearings, and they don't look bad at all in general for that generation of BMW V8's and V10's. Nice work, keep it up! Fun fact: I did motorsports photography for Turner a while back, Will and the team are awesome people!
The power steering fluid is the wrong kind. It should be the same you used for the Porsche CHF11S. That could be your sound. Those reservoirs also have a non serviceable filter. I would get a new one, flush all the fluid, and hope your pump is not hurt.
Funny how you happen to just have two project cars that are two of my favorite cars of all time, glad I found this channel
Coming here after s65 💥
5:55 well you predicted it here lol
First i saw the video u using impact to remove the caps, it was painful to watch
Nothing wrong with using an impact to remove bolts lol plus new ARP hardware was used.
You only get one set of eyes , protect them use goggles when spraying engine parts 😮
It always amazes me (in a bad way) how clapped out many ///M BMWs end up over there in the US. Seems like couple owners in people who really can't afford to run and maintain them (the way they should) get their hands on these and give the brand its bad rep. Its just amusing (also not in a good way) how much shit people talk about RELIABILITY when they put zero maintenance into a car.
Wow..I passed on a nice E92 m3 on Bring a Trailer.. Kinda been thinking of selling my FRC Vette to get on..Good Luck with the build.
"At least the engine didn't blow up" 🤣🤣. I feel the same way after every time I drive my e90 M3. I've enjoyed the P car stuff but excited to see these updates!
I'll be thinking that whenever I get it running I'm sure lol.
Belt/tensioner are known to make wild noises when on their last legs.
You might want to double-check the oil filter housing gasket as those are known to leak. At this point? Water pumper and thermostat might as well be swapped while you’re there.
When you have passion for something is easy,rest and come back stronger.👍
Get some inspiration from M539 😊
I gotta say I prefer the substitles on this video as supposed to the last one, it felt less like idiotic short form content made to be watched with no volume or a song in the background (say... tiktok for example) and more like something to aid people who are in a loud space when you aren't talking clearly for one reason or another, or who have lost their attention span to aforementioned types of media lol.
Enjoying this car, I was actually thinking I would love to have one of these for both a project car and eventual daily driver, which from me is saying something since at the moment I really wouldn't consider buying much. Either way, thanks for the great vid!
Pooorsha guy here. Lovin these Beemer videos too
9:06 always put a little bit of silicone on both sides of the gasket and the seams of the metal parts, tighten the bolts of the pan a little,wait 15 min tighten them completely. Don’t fill with oil just wet ,wait a few hours (a night if you can) and then put the oil and start the engine and you will have no leaks. On this German vehicles there are always leaks so I find that method successful.
I love the works you do keep pushing on it .🤙🏻
NEVER use silicon!
I would Check the power steering pump. Spin the wheel a couple of times from side to side and hold it there for like 3 seconds. That could fix the sound youre hearing. It sounds like you have air in the system of the power steering.
It's not coming from that area. Sounds awful though lol
Hi Matt. This BMW could be a beauty. Great job on the Bearings. It's a shame about the Clutch. I know your dying too drive it lol. Lovely Project. 😅🇨🇮
Matt, just in case you will decide to drop the transmission and do the clutch, I wanted to note a few things from my experience. Ive dropped the transmission twice in last 3 months on my E92 M3 (on jackstands - no fun :). What Ive struggled with the first time is the separation of the tranny from the engine. You will learn that you have to manipulate the angle of transmission while it is separating from the engine in a certain way. My struggle was the last 3-5mm of input shaft clearance out of the clutch cover pins - it was just not clearing. In the end what I have done is just give it a hard push towards back it it popped out. You might know all that already but in any case.... Also, Ive been following your work for a while. I have E36 M3 that is receiving an LS2 currently. Gathered a lot of great info from your E36 project. Thank you very much for that. Good luck
Love that. M3 slow but sounds sooooo good that’s my dream car ecs supercharge would make it really fun my boi has it on his car not super fast but it’s fun car🏎️💨💨💨
I highly recommend you to dry ice blast the whole bottom of the car it'll make it look brand new and shiny
Great build, german cars are the best!!
"At least the engine didn't blow up"....yet
So… no plasti gauge to confirm proper clearance of the new rods to the crank?
Honestly after Sreten, i can't stand anyone working on a Bmw engine
@@vchris1987I think Sreten would have a panic attack watching this 😂😂
@@vchris1987 Agreeeeedd!!! After Sreten... this is just a Guetto Job.
@@johnniek72 I think we are not comparing apples to apples. Not only in knowlegde and tools... but in love for these machines (BMWs and Ms specifcically). On one side Matt Ross refers to the car as a disaster and nightmare. He clearly doesnt like the platform and does not see other potential except you tibe content. On the other hand, Sreten does love BMWs and does not cut corners (unlike Matt) and imagines the final result and the joy he will be having along the journey. Instead, Matt seems in pain. It is the same pattern he showed with his Porschas, the 996 and 997. For a true fanatic, some things Matt does are heretic but entertaining nonetheless.
@@redzone5655 I love the Porsche content but I had to turn this off, I was cringing at the TV. Not for me thanks 👍🏻
The e92 m3 maintenance outbreak will never end but it'll have you to sooth its pain better than Abreva.
E36, 996, 997 and e92 are my favourite cars on earth lol love the content e92 m3 is 👌💪 my next wip
I think you forgot to measure the rod bearings cleareances, using dial bore gage or plasti gauge, you may have tighten it too much or not enough. :D
Heck yes - although i love the porsches, im a bimmer guy for sure! e92 is one of the best.
You can bet someone had been thee before you to replace rod bearings after some had spun and they decided to put the new bearings in an send it hoping for the best (or hoping to get rid of it FAST and let the next poor suck deal with it)!!
Great to see you branching out to try other brands Matt, albeit another German brand. Great content as always, been a fan of this channel from the off.
That bearing job looked like.....a bear, bet it was nice to have a full lift instead of the quicklacks and bear necessities HA! I'll see mahself out!
AhHahaha
The steering fluid is the same brand that put in the Porsche.
as an observer...Your workshop is uninspiring....dirty. You don't clean parts before replacing them on the car. At around "10:00 " you should have lowered the hoist a foot or two. The cross member is filthy. If the slave cylinder and new serv ice line leak then they are an incorrect match in fitting or wrong thread. Bearing shells can't spin on one half only. Use well plaed small cable ties to hold your sump gasket to the pan while replacing sump. Did you clean the sump inside?....you didn't outside. Don't use vyce grips on any polished shaft..as you did with the bonnet. struts......use the correct and special clamps. Overall...? I wouldn't allow you to work on my BMW's or actually any car...you are not houseproud...
That's not even my garage.
How is the interior light on but the bsttey must still be connected after you are done with the clutch fluid line? Heh?
Hey, Matt love you showman longtime watcher. I'm a youtuber myself. I have a channel called, fix it, Daniel, and I was wanting to ask you. Where do you get your music from? That's not copyrighted and that you use on your channel. Cause I wanna use music like you're using but I keep getting hit with a copyright. Could you help me out from one? You two a next so where you go and use to use your music
Here you go! share.epidemicsound.com/dge6e8
It has a TON of music, sound effects, etc. It's reasonably priced.
@matt13ross thanks I'll check that out. You wouldn't happen to know any good free ones. If there are any.
best thing i did matt was put a turbo fg barra in my e90 sacralidge but awsome at the same time
So many projects in play this is awesome! We’re loving the juicy 🍑 content, keep it coming please!
Thank you! Will do!
I don’t believe it, that torque wrench was probably broken and you were using it like a normal wrench with someone clicking in the background
Lololol
That's normal for the bearing cap to look like that.
That thing is gonna be sick when it's in perfect again 🔥🔥
Finally the beamer content started...love it❤
Going to love this build. Great job mate!
Those Bearings aren't 'spun' ...They're just worn out. A spun bearing literally spins in the Rod Big End ...and comes out paper thin from all the rotation of the rod & crank.
Yesss!! Love bimmer content bruh!
Love this car ! I think it’s the m3 to have
letting the v8hang by that motor support brace big nooo noooo
Why's that? It's designed to do that.
@@matt13ross yeah it is but I have seen engines tumble down
They must have done something wrong then.
@@matt13ross raising the lift, the engine shifted and tossed the brace
E9x = former mustang owner
Power steering fluid u over topped it
I’m proud of the torque wrench!
Good job , men !! I love this car 👌👌
Sounds like it could be the power steering pump or the pulley/belt to the power steering pump thats making that awful noise.
Throw out bearing can make a lot of noise on BMWs.
That's my bet
Sorry ess turning typo *
Good job for a first time 🙌👍👏💯
Bro this m3 is sick
Great video man.
did you use ARP Ultra-torque fastener assembly lubricant on the bolts?
Sure did
@@matt13ross damn, I'm not saying it was, but the torque wrench might be out of spec. A rod bolt stretch gauge would have been helpful here to confirm that all rod bolts were torqued properly
It's just hard to believe only one would fail when all the rest appear just fine.
Love it!!!
loving the videos keep up the good work!
Appreciate it!
Just out of curiosity, did you pay for the parts from ECS, or are they sponsored? Only reason why I'm asking is I'm trying to help save you some money if you're coming out of pocket. I used to go through ECS for all my stuff, but I found some better places that's cheaper, and are actually genuine parts.
I paid full retail (unfortunately lol)
@matt13ross damn lol, i feel your pain. Try this, find what you need on ECS, then copy the MFG#, and paste it on google. There's a specific site that has the parts cheaper, but RUclips keeps deleting my comment, and won't let me post the place.
@matt13ross welp, once again I've tried like 10 times to help you out and give you a place to purchase that stuff for cheaper that's genuine parts. But RUclips keeps deleting my comments. 🤷♂️
@atrain132 email him then. No need to struggle with RUclips
Yea they like to delete lots of things lol. Thanks!
Just BMW power steering pump sound, try to flush and bleed the system.
It's def not the pump
Yeah, great project Matt. Before you do anything else to it, change the hood struts first. Lol.
Working on that lol
Matt, to try to chase down that noise ...remove the Accessory Drive Belt, and start the engine, don't run it for long as you aren't spinning the Water pump. If you have an idler or any Accesry drive items that have bad bearings, the noise should cease. Good luck Buddy, you got this!
I don't think it's accessory related.
Wow, I didn't think there were any German marks worse than Audi
Lolol
More Duramax videos dope vids man !!!!!!
Thank you! I've got more in the works.
What about the top of the rod bearingd
Those were replaced as well. You have to spin the bearing around.
The sound coming from the power steering
I don't think so.
@@matt13ross guarantee
@@matt13ross check RUclips about power steering and you will now
I know what that sounds like.
#7
#7?
@@matt13ross I was just messing around, I had the 7th "like" to your video. Good luck getting her rehabbed. Bimmers with Playdoh bearings scare me.
Thanks for the like! I was confused lol