Thanks a lot. I followed your details and clear instructions. However, although the setup has done correcly, when I start the flight, a pop up displays saying "throttle axies not found" and I cannot use the throttle. I am struggletoslave it. Any idea/suggestion? Thanks
Hi.My saitek yolk is unresponsive.also the throttle. I did delete x plane by mistake and then re installed it. But...since then i've tried connecting it your way but neither are responding. Any help would be appreciated...Elviswhit
Good Job. I have one question as a new user of the Logitech Flight Yoke system with X Plane 11. I can make no sense of how to set-up and use the three way mode button on the rear of the right hand grip. Have you explained this in a video anywhere or can you offer any tips on that?. Thanks
Hello I like your video, I need your help on setting up my rudder pedals thrustmaster, I have Thrustmaster Rudder Pedals , A320 side stick and thrust levers but every time I try to connect the 3 sets I get message in X-Plane 11 I have multiple Axis for Yaw and left and right toe brakes, but I disconnect the thrust levers everything works normal, but I don’t know how to fix that issue, So please if you a way to fix that issue definitely will need your help.
For sure! So the problem might be from the side stick as most side sticks have a yaw axis if you twist it. Having this and the pedals might have displayed this message. What I would reccomend would to be specifically selecting the rudder pedals in the control settings as the primary axis for yaw so that that message does not show up.
Your instructions are all over the place. You talked about the Mixture control but never about the Prop and Throttle, you went from Mixture to the buttons below...
You know there are dust cloths and swifter dusters out there , Guess Im real picky about keeping my system spotless I kept wanting to wipe the screen watching this lol , Great video tho.
Hi. Thank you for the tutorial. If i have a joystick with only one throttle control, can i setup it to control 4 turbines? How can i set up all in one?
Hey I just bought the Logitech/Saitek yoke and throttle control but no rudder pedals, is there a specific button I can map the rudder to since I don’t plan on buying the pedals any time soon ?
Rudders are axis-based so the use of buttons doesnt work on it. But you can set it up so that your yoke's x axis could also work as an effective ground steering system along with its intended purpose of the ailerons.
On the thrust lever in the throttle quadrant, there is a section marked with red lines which you can pull the lever in reverse to activate the reverse thrusters. For me, that would be the best setting for reverse.
hello i have a problem i can not run FSX with win10 pro i can go to setting only and when i want to run FSX i get a black screen My config is PU=icore9 9900k 32gb DDRam MBoard asus strix z390 , GPU geforce 2080 super & SSD NVME 2TB + 4 GB HDD WIN10 PRO
There isnt any specific one but, you should have at least 16GB of ram, an intel i7 or AMD Ryzen 7 Proccessor, and a good GTX/RTX 10180Ti graphics card. Also have at least 1TB of SSD storage so you have plently of space for addon ons and the game itself along with non flight simulator gear. With these specifications you can get up to 60FPS on MAXIMUM settings.
so you only need 1 usb port right i dont have a pc i play on laptop wich has 2 usb ports one for mouse and the other one for the yoe nd the thrudt levers right?
Mine just doesn’t want to connect to my computer when I tried turning it on X-plane 11 it just stays still because it doesn’t connect😠😠😠😠 and I had enough I’ve been waiting for about eight years and it still keeps doing this
Hello, nice video, I was looking for some one like this, because I have some issues with my logitech saitek peddals rudder, I can not configurate them, I mean the saitek yoke and saitek throtle quadrant works just fine, but the peddals are recognized by Xplane11, actually I can calibrate them through Xplane, but once I jump into the airplane, rudder doesn´t work at all. At the very beggining nolt even one of the three (yoke, throtle and rudder) works at all, but I did something in the configuration and I could figured out for yoke and throtle but still with problem with my rudder pedals.!! could be it because it is a Xplane11 Steam version (I mean not the 8 DVD edition) . Best regards.
i would love to buy it but............................................................................................................................................................................. it costs too much
Thanks for posting this setup; I'm a flight student and just downloaded X Plane 11 - this will help!
Thank you very much for the very useful video, greetings from Mexico City
Very welcome.
Thanks MC.as I am just getting started this is helping me very much.keep up the good work.
Thanks a lot. I followed your details and clear instructions. However, although the setup has done correcly, when I start the flight, a pop up displays saying "throttle axies not found" and I cannot use the throttle. I am struggletoslave it. Any idea/suggestion? Thanks
Hi.My saitek yolk is unresponsive.also the throttle.
I did delete x plane by mistake and then re installed it.
But...since then i've tried connecting it your way but neither are responding.
Any help would be appreciated...Elviswhit
Good Job. I have one question as a new user of the Logitech Flight Yoke system with X Plane 11. I can make no sense of how to set-up and use the three way mode button on the rear of the right hand grip. Have you explained this in a video anywhere or can you offer any tips on that?. Thanks
The mode button just switches the LED panel in the front from displaying the time to being a stopwatch timer.
I’m confused as to what that adapter for the thrust master pedals was. Car mode? My pedals didn’t come with that.
Hello I like your video, I need your help on setting up my rudder pedals thrustmaster, I have Thrustmaster Rudder Pedals , A320 side stick and thrust levers but every time I try to connect the 3 sets I get message in X-Plane 11 I have multiple Axis for Yaw and left and right toe brakes, but I disconnect the thrust levers everything works normal, but I don’t know how to fix that issue, So please if you a way to fix that issue definitely will need your help.
For sure! So the problem might be from the side stick as most side sticks have a yaw axis if you twist it. Having this and the pedals might have displayed this message. What I would reccomend would to be specifically selecting the rudder pedals in the control settings as the primary axis for yaw so that that message does not show up.
Next Sunday's Video: Infinite Flight American Eagle CRJ200 San Francisco - Los Angeles
No u
uno reverse card
Your instructions are all over the place. You talked about the Mixture control but never about the Prop and Throttle, you went from Mixture to the buttons below...
Ur voice got deep from your video with the infinite flight joystick
Ummm, yeah that usually happens when you go through puberty. :-/ My voice changed a lot when i turned 13.
My Logitech flight yoke will not work with X Plane 12 any suggestions?
i did this and everything works except for the pitch and roll any help plz?
You know there are dust cloths and swifter dusters out there , Guess Im real picky about keeping my system spotless I kept wanting to wipe the screen watching this lol , Great video tho.
Hi, can I use this yoke and throttle quadrant on x plane 12 as well?
Yes, all controllers that work on xplane 11 also work on x plane 12.
Hi. Thank you for the tutorial. If i have a joystick with only one throttle control, can i setup it to control 4 turbines? How can i set up all in one?
yes, it should be default like that so no need to set it up unless you changed the settings in the past
Hey this is awesome I have the exact same controls thanks man :)
Hey I just bought the Logitech/Saitek yoke and throttle control but no rudder pedals, is there a specific button I can map the rudder to since I don’t plan on buying the pedals any time soon ?
Rudders are axis-based so the use of buttons doesnt work on it. But you can set it up so that your yoke's x axis could also work as an effective ground steering system along with its intended purpose of the ailerons.
The MC Airplane gotcha thanks for the reply, great video btw.
what would be best for reverse thrust or is it better to do it on the keybord
On the thrust lever in the throttle quadrant, there is a section marked with red lines which you can pull the lever in reverse to activate the reverse thrusters. For me, that would be the best setting for reverse.
Thanks it was helpful ..... you sound like a nice kid (=
Can you also use a macbook air laptop as the game platform or do you have to use a gaming pc
You can, you will have to play on min graphics and get a powered USB hub. Safe flying!
hello i have a problem i can not run FSX with win10 pro i can go to setting only and when i want to run FSX i get a black screen
My config is PU=icore9 9900k 32gb DDRam MBoard asus strix z390 , GPU geforce 2080 super & SSD NVME 2TB + 4 GB HDD WIN10 PRO
I used FSX steam edition, it runs smoother than the normal version
What PC/ laptop recommended to use.
There isnt any specific one but, you should have at least 16GB of ram, an intel i7 or AMD Ryzen 7 Proccessor, and a good GTX/RTX 10180Ti graphics card. Also have at least 1TB of SSD storage so you have plently of space for addon ons and the game itself along with non flight simulator gear. With these specifications you can get up to 60FPS on MAXIMUM settings.
Hey bro can I ask if you could send me the link to your pc and monitor?
How to add another site of throttles..
Please help, Joystick is not coming up.
Perhaps its not plugged into the computer correctly?
I can't buy this Thrustmaster USB adapter seems like not possible to buy that in my area amazon out of stock ebay nothing wtf.
I have the same yoke but I turn it 45 degrees and it turns the yoke 90 degrees in the sim.
so you only need 1 usb port right
i dont have a pc i play on laptop wich has 2 usb ports one for mouse and the other one for the yoe nd the thrudt levers right?
Yes, because the yoke has a hub
@@themcairplane ok thx
Hey great video, What computer do you recommend ? Like the cheapest alternative for X11?
Bx 7 iOS ironsidecomputers.com
Mine just doesn’t want to connect to my computer when I tried turning it on X-plane 11 it just stays still because it doesn’t connect😠😠😠😠 and I had enough I’ve been waiting for about eight years and it still keeps doing this
Can u put 2 of the flight quadrants together
Yes
Can you use these accessories while in vr
Yes
@@themcairplane Thank you
will the velcro double sided addon with logitech rudders stick to carpet
Yes as long as the carpet is not too thin.
thanks. will try it.
So i can link up the logitech g 945 yoke and the thrustmaster rudder pedals that would be cheaper too right?
Yes, that’s what I did. It works perfectly
How well do you like the pedals
For their price they are ok but if you can get the saitek pedals
how do you do reverse thrust with the throttle quadrant?
By putting the throttle in the red section on the throttle quadrant. It is not default, and you have to set it up manually
Who much was all of this
$2,500 USD if you include the PC
HaHa great tutorial. Your voice has lowered alot since your first Saitech yoke tutorial. Remember dont check that box. LOL
Hello, nice video, I was looking for some one like this, because I have some issues with my logitech saitek peddals rudder, I can not configurate them, I mean the saitek yoke and saitek throtle quadrant works just fine, but the peddals are recognized by Xplane11, actually I can calibrate them through Xplane, but once I jump into the airplane, rudder doesn´t work at all. At the very beggining nolt even one of the three (yoke, throtle and rudder) works at all, but I did something in the configuration and I could figured out for yoke and throtle but still with problem with my rudder pedals.!! could be it because it is a Xplane11 Steam version (I mean not the 8 DVD edition) . Best regards.
It might be that your sensitivity is set so low on your pedals you cannot tell they are working.
I am having this EXACT problem! Have you figured anything out on yours yet? I’m so confused
@@trevordunnavant4547 edit sensitivity curve ( 6:20 )
Can I use that Yoke for an Airbus A350?
I imagine so
i would love to buy it but............................................................................................................................................................................. it costs too much
Is it ok on a laptop
Depends on the specs of the laptop
What is your PC's specifications?
16gb ram, 1.5 TB hard drive, ryzen 7 CPU, 8 cores.
@@themcairplane nice specs :D
I can’t even afford the game
d o dcs plz i beg
my Logitech Flight Yoke will not work with X Plane 12 any suggestions?