Thank you. All the other tutorial videos are lengthy with some geek crapping on about themselves. This 2.5 minute video explains everything and very clearly. Awesome!
I have a problem. I have calibrate the throttle and only mixture work good. The prop and throttle make like a crazy up down very fast and i can't find solution. What i have to do ?
Can anyone help me as I have to SAITEK pro yokes and X plane 11 is only recognizing one of them although I can calibrate both but only one functions while in flight
@@jamesscatigna2721 X-Plane 11 is not designed to work with multiple yokes, In a real aircraft both yokes would be mechanically linked to move together, not independently. Unless you configured your system to do the same, it would not be realistic.
Does anyone know how to remove the virtual instruments panel from showing but still have the nose of the fuselage and propeller showing??? I am confused on that
@@jamesscatigna2721 There isn't an easy way but you could edit the first person camera viewpoint in Planemaker (assuming X-Plane), or you would need to build a copy of a plane without a panel.
@@kenfriess3108 You may need to contact Logitech directly. Make sure your PC recognizes the hardware and see if X-Plane shows the peripherals in the Joystick settings then setup each axis and calibrate.
I have reached out to them and have done all they have suggested so far to no avail. I have set up calibration in x plane control setting...but no response when I am in the game.
@@GleimAviation it let's me calobrate everything but the roll. The roll has no input. Could be that the yoke came defective. But I've read a few complaints will be testing it out for Microsoft tonight
I don’t know but my throttle stopped working it says it’s on and there is no input it has wired before this is so upsetting because it was my only source of fun😭
How long have you had the throttle? Is it USB or does it plug into a Logitech yoke? Did you purchase it from Gleim? You can program buttons on your keyboard to control the throttles until you get that fixed.
@@GleimAviation I got it for Xmas and it started being weird yesterday it is the lifetime Logitech yoke and I don’t know where I got it can I return it?
Thank you. All the other tutorial videos are lengthy with some geek crapping on about themselves. This 2.5 minute video explains everything and very clearly. Awesome!
Thanks!
what would you say the recommended sensitivity is for a cessna 172?
I have a problem. I have calibrate the throttle and only mixture work good. The prop and throttle make like a crazy up down very fast and i can't find solution. What i have to do ?
Very helpful thanks
I had my sensitivity settings all wrong thank you so much my landings have improved.
So glad we could help your landings! Keep the blue side up!
Hello, can you help me, my throttle quadrant is working in reverse, and any airplane I use is bouncing up and down during takeoff roll
Can anyone help me as I have to SAITEK pro yokes and X plane 11 is only recognizing one of them although I can calibrate both but only one functions while in flight
Hi James, are you saying you have more than 1 yoke? You can only assign an axis to 1 control at a time.
GleimAviation yes I have 2 SAITEK pro yokes as I have a dual pilot panel from flight velocity
@@jamesscatigna2721 X-Plane 11 is not designed to work with multiple yokes, In a real aircraft both yokes would be mechanically linked to move together, not independently. Unless you configured your system to do the same, it would not be realistic.
Does anyone know how to remove the virtual instruments panel from showing but still have the nose of the fuselage and propeller showing??? I am confused on that
@@jamesscatigna2721 There isn't an easy way but you could edit the first person camera viewpoint in Planemaker (assuming X-Plane), or you would need to build a copy of a plane without a panel.
Has anyone configured the Komodo Simulations Cyclic and Collective helicopter controls yet with Xplane11?
is there any whay to get a action when the Botton is released ?
Released is the off position, unless your write a script for that.
How do u get to that initial screen???
I had the same question
Check out the mouse pointer in the video...click the setting button on the top right, then select the joystick tab and you'll be there.
When I’m in cockpit I move my quadrant and in the cockpit it does not move
It says no device found
I have tried everything and cant get my logitech pedals or flight yoke to work in x plane 11?
Hi Ken, did you purchase from Gleim? If so, you can contact our technical support team at 800-874-5346, ext. 212.
No I didn't...got from Canadian Computers.
@@kenfriess3108 You may need to contact Logitech directly. Make sure your PC recognizes the hardware and see if X-Plane shows the peripherals in the Joystick settings then setup each axis and calibrate.
I have reached out to them and have done all they have suggested so far to no avail. I have set up calibration in x plane control setting...but no response when I am in the game.
Strange thing is it works fine in msfs 2020.
Roll does not get picked up by x plane on my new yoke
Make sure the yoke is calibrated and roll axis is defined in the X-Plane settings
@@GleimAviation it let's me calobrate everything but the roll. The roll has no input. Could be that the yoke came defective. But I've read a few complaints will be testing it out for Microsoft tonight
I don’t know but my throttle stopped working it says it’s on and there is no input it has wired before this is so upsetting because it was my only source of fun😭
How long have you had the throttle? Is it USB or does it plug into a Logitech yoke? Did you purchase it from Gleim?
You can program buttons on your keyboard to control the throttles until you get that fixed.
@@GleimAviation I got it for Xmas and it started being weird yesterday it is the lifetime Logitech yoke and I don’t know where I got it can I return it?
@@brendanshannon9562 You may be able to return it to where it was purchased from. Or you could contact Logitech support online.
Tengo a la venta un simulador nuevo y barato espero y te interese.
the settings are so shit in xplane 12 its rubbish