You really aren't supposed to use your home oven to bake paint. It's dangerous and unhealthy. That's why most youtubers who use home ovens to do this usually setup a 2nd used old oven in their garage or work building to diy bake paint.
Hondas most underrated vehicle? Sir I’ll have you know I built and turbo’ed an acura legend sedan. THAT is underrated. This ain’t that hard it’s a J series 😂
Oh man, I had a 2001 Accord sedan that I pulled the J30A1 and swapped in a JDM J32A, swapped it from auto to manual with a 2003 Acura CL Type-S LSD six speed manual trans, and I fabricated a turbo kit for it with a GTS3582 turbo with a GFB electronic boost controller, 1000cc injectors, and it all ran on an AEM Series II 30-6051 standalone ECU. It made 503 whp at 10 psi.
Hey dude that was a great watch. BTW if you find you are having issues with power steering noises ever, there's usually 2 o-rings going into the pump that go bad + you can also replace the entire power steering reservoir itself, plus flush all the lines. The reservoir has a filter inside, I replaced it on my '08 accord when I had it and significantly quieted the system. Obviously only use Honda PS fluid too.
Good to hear man, I wanted all the noise gone completely and my car wasn't super well maintained and even after several flushes, I still got noise at max steering turn, especially at idle or low speed. @@_Gingium_
Sup man, awesome build I have a gen 6 EU accord myself.. just a heads up - baking the paint in an oven where you also prepare food is a pretty bad idea.. the particles and volatiles stay there for AGES and get onto the food you eat (even though you don't necessarily taste it).. I don't need to tell you why that's super bad.. get a cheap old oven from marketplace to plug into a socket in your warehouse (also great for installing bearings and friction fit stuff.. you don't need a torch)
make sure to re-gap those rings if you want anything more then 350 whp! They heat up and touch and blow the ringlands to pieces. Happened to me with my turboed j30.
thats the content we all petrolheads needs, here in argentina one guy put the same engine with a big turbo in a rear wheel drive Ford Taunus and sounds incredible too
So happy that turbo j series is finally getting more main stream. I would love to turbo my TL type S some day and if more creators start getting into the platform it may not be too long before we see a full kit get produced.
@@UncleVenz there’s a few supercharger kits out there but with how compact the j series engine bays are I don’t think it’s been worth the r&d for a company to step in and make one.
I just bought a 2016 6-6 with 39k. I've owned a rsx-s. Still own em1. My 6-6 is a masterpiece of a car. What's crazy it's as fast as my cousins 2018 sti.
@flare749 it really was a great find. I was going to look at a civic si then they had this come in day before. It's not perfect has some cosmetic flaws especially for mileage. But I love it more and more everyday.
Now you have my attention. I have 2 of those cars. An 03 in San Marino red and an 06 in Alabaster silver, both 2 door and 6 speed. My 06 is a rare ALL OPTION car, it has the spoiler, fog lights AND navigation with carbon fiber trim and no blank swithes!!!
Maturing is realizing Gingium has always been THE man… man doesn’t get enough credit but it’s so cool to see how this channel has changed and grown since I started watching in middle school
Run Royal purple oil through it for 500 miles then check valves and do it again it’ll make them valve train look new again, then go back to your original oil
Another important step before painting metal parts (especially iron) is to heat the parts with a plumber's torch right before painting. Not too hot, but enough to drive off moisture and expose any residual grease, oil or cleaner left behind.
Can confirm. Couple light tack coats with about 10 minutes to dry, and then a good flood coat and heat gun got me a great looking wrinkle black valve cover with none of the build up lines. Very uniform fingerprint style wrinkles too.
I use the wrinkle paint a lot. Best result it to heat it up with a heat gun, first coat light and the next 2 coats heavy. You’ll get a better result using a heat gun afterwards too
From swaping this engine in my s2000.. youl need stronger bottom end in the long term.. built one aside . But a standard accord 2 doors. That was the rare gem we were looking after. They make really good match to supercharger too.
Should really gap the pistons rings too. How much boost are you planing on trowing at it? You can cerakote pistons and give yourself a little layer of "holly shit" protection too. But if you open the engine just built it with froged internals. They aren't that pricey.
You definitely got a new subscriber!! I have a 07 6-6 coupe that is sitting! Just got it back from replacing the engine! Threw cylinder 5’s spark plug twice! You should make sure you check your spark plugs often to make sure they are tight! There was an issue at the factory with some of that years accords being off a little when cut on cylinder 5! I have a 100k gently used replacement engine and ready to get it back on the road!
I was hoping you would wrinkle paint the intake manifold as well, but after seeing it with the contrasting silver and black I think that was the right decision. this thing looks great!
Eat the cat don’t eat the dog. Sweet mod. I looked up the super charger upgrade that looks like some more fun times for the 3.0 Honda. Your videos are so much better than most. Thanks a lot.
This has been by far my favourite build series . Not necessarily my favourite car even though I love Hondas . Keep it jdm cars, Simple but nice interior upgrades, custom exhaust , new brakes wheels , turbo and engine mods and a few bolt on exterior mods makes for the best most relatable build series . The numbers don’t lie 😊
VHT has a deeper and better looking wrinkle if you let it dry in cooler temps (warm room). Higher oven temps will make the wrinkles "tighter" or smaller
The title makes me think Honda Cr-z but honestly the J30 doesn't get enough attention and this was insightful to my own turbo project (yes it's a CR-Z)
Nice work as always!! Quick tip, get a carbide scraper and ditch the razor blade for removing old gasket material. Just recently started using one and its so much better.
u should punch the block out to 90mm and swap in a j37 crank and rods, it will make it a 3.7L which will give u that lowend before boost hits and make the turbo spool better too
You should valveoline restore and protect oil for the next 2-3 oil changes and see how it does cleaning the varnish / sludge in the engine and pop the valve cover off to see
Hey Gingium I've done powder coating at home and if I can do it I think you can too. I'd say the hardest part is the oven but you can just pick up a regular kitchen oven and set it up in the shop. I used a sandblasting cabinet to get my parts cleaned up and I think I saw you had one. Only things you would have problem powder coating is rims but if you really get into it I seen people make big ovens with kitchen oven elements and regular insulation stuff you'd find in a regular hardware store
If you have the hood clearance for it, you should look into getting the intake spacer off of a Honda odyssey with the J35, it makes the intake sound so good and the throttle response is a tad better!
if you really want to refresh the engine and make sure you don't have starvation issues later i suggest you flush the engine using liqui moly or BG products
I miss my 05 Accord, parts were super cheap and super easy to install. I currently own a 06 Acura TL 6MT with a J37 swap. I could have bought 2x 05 accords with the amount of money Ive spent on my TL. To even get the hondata flash flashpro to work I had to buy an 07 ECU, a boomslang adaptor harness, and a 06 TL Non-navi ecu & can adaptor. Thats why when i see people who have the 5 speed automatic wanting to upgrade their engines I always suggest to sell it and buy a 6MT.
Red crinkle paint would've looked good for the intake manifold cover and the valve covers. The exterior Honda badges are red, so those little touches would make it pop.
It would be nice if you added a "part 1" in the title since I'm sure not the only one who likes to binge watch this type of videos to the final result.
One of my favorite accords period friend of mine had 07 v6 6mt and use to beat me in my 03 infinity i35 4speedauto but once I bought an 03 maxima 6mt basically same car I finally beat him !! Those 6 speed maxima 02-03 were no joke and stock vs stock they out ran the 03-04 nissan 350z so in 05 350z came with rev up motor more power lol but yeah love the content thanks for the video
Please when washing your engine bay cover it with something. It could possibly damage your alternator and thats obviously not good. Just a tip ! Great video btw I love watching the progress
Great video. Appreciate the clear, steady video, great lighting and angles. Also, great job in editing, getting straight into the content. I am looking forward to the manifold fabrication and turbo pipe routing. What's your camera setup?
You can use that wrinkle black with out baking in the oven and get the same result or even better lol I have a wrinkle black intake I did and never put it in an oven and it still looks perfect and has the texture to it
Interesting to see how well that paint holds up. I tried to paint my J's manifold twice and it just wouldn't stick. Ended up giving up and having it powder coated. Then again I didn't sand it like you said lol
Wow that oven trick really turned out cool. Would have not guessed it would do that. If you do this regularly might want to get a dedicated oven for that though. :P
I've got a Pulsar 4849G (G25-550 clone) and it's LOUD even without the T1R mod. Pulsars seem to be way louder than the Garrett equivalents from what I've heard from others also. It's too much for a daily driver so I hope you don't regret going T1R mod haha.
You ever need something coated and a fast turn around just lmk, I have some coating on my channel and actually stopped doing youtube I got so busy. Never backed up and never overpriced 👏
*Hope you don't use that oven to cook food...*
He is a dumb ass kid with money what do you expect
It’s super healthy to cook car parts in a food oven. 100%
It adds flavor, live a little.
Neighbors probably think you cook meth.😂 im sure they smell the fumes.
and carcinogens lol
@@BiffBallbag
You really aren't supposed to use your home oven to bake paint. It's dangerous and unhealthy. That's why most youtubers who use home ovens to do this usually setup a 2nd used old oven in their garage or work building to diy bake paint.
Yeah... 😬
Yes, please DO NOT do this. You will breathe in paint and your food you bake will have paint residue in it. This is why paint shops have paint booths.
He's done this before and I said the same thing.
yes. DO NOT DO THIS.
That's not important. But why the hell is - on the right and + on the left???
I figured this was coming… can never resist boosting a Honda.
too true
They just love to move air !!
Hondas most underrated vehicle? Sir I’ll have you know I built and turbo’ed an acura legend sedan. THAT is underrated. This ain’t that hard it’s a J series 😂
Please build another Fred the focus yes I've been around that long make a fast one for the OG's @@_Gingium_
Except it never happened but that is why we came here for, as the title suggests.
Oh man, I had a 2001 Accord sedan that I pulled the J30A1 and swapped in a JDM J32A, swapped it from auto to manual with a 2003 Acura CL Type-S LSD six speed manual trans, and I fabricated a turbo kit for it with a GTS3582 turbo with a GFB electronic boost controller, 1000cc injectors, and it all ran on an AEM Series II 30-6051 standalone ECU. It made 503 whp at 10 psi.
Thats really cool, ive always wanted to do that on a 4th gen odyssey but with the j35 or j37
You have fb or ig I got questions cuz I'm doing that same thing
I have a 99 acoord coupe j30a1 automatic planing on putting j32a2 from cl or tl type s
How much would it cost you to do that?
@popeantichrist8847 so far I'm only in like 1400 or so
Hey dude that was a great watch. BTW if you find you are having issues with power steering noises ever, there's usually 2 o-rings going into the pump that go bad + you can also replace the entire power steering reservoir itself, plus flush all the lines. The reservoir has a filter inside, I replaced it on my '08 accord when I had it and significantly quieted the system. Obviously only use Honda PS fluid too.
It was loud when I first started it after everything, but after bleeding it it quieted up. Good to know though!
Good to hear man, I wanted all the noise gone completely and my car wasn't super well maintained and even after several flushes, I still got noise at max steering turn, especially at idle or low speed. @@_Gingium_
Yup, that little set of rings was all I needed to shut up the power steering. Easy peasy.
The p/s pump inlet o-ring has an updated part number, the original is a black o-ring, the new 1 is orange
Damn Honda power steering pumps, my Tl 3.2 had a bad one
Sup man, awesome build I have a gen 6 EU accord myself.. just a heads up - baking the paint in an oven where you also prepare food is a pretty bad idea.. the particles and volatiles stay there for AGES and get onto the food you eat (even though you don't necessarily taste it).. I don't need to tell you why that's super bad.. get a cheap old oven from marketplace to plug into a socket in your warehouse (also great for installing bearings and friction fit stuff.. you don't need a torch)
make sure to re-gap those rings if you want anything more then 350 whp! They heat up and touch and blow the ringlands to pieces. Happened to me with my turboed j30.
He won't, that will be the downfall of this build.
thats the content we all petrolheads needs, here in argentina one guy put the same engine with a big turbo in a rear wheel drive Ford Taunus and sounds incredible too
theres is a video called "TAUNUS V6 TURBO 420 HP "EL GF""
@@frann949 sounds crazy imma check that out
So happy that turbo j series is finally getting more main stream. I would love to turbo my TL type S some day and if more creators start getting into the platform it may not be too long before we see a full kit get produced.
Yeah I'm surprised there aren't any kits out there!
y’all don’t have a turbo kit?
my B15 sentra 1.8 has like 5 of them
@@UncleVenz there’s a few supercharger kits out there but with how compact the j series engine bays are I don’t think it’s been worth the r&d for a company to step in and make one.
@@jcsweet6618 that makes sense
i had a boosted 3.6 Challenger and couldn’t really fit turbos that great so i went centrifugal sc
there are kits from slickfab and from halferland performance. both are small companies that focus primarily on j series.
those are some fancy parts
I just bought a 2016 6-6 with 39k. I've owned a rsx-s. Still own em1. My 6-6 is a masterpiece of a car. What's crazy it's as fast as my cousins 2018 sti.
I got a black 16 6-6 too, fbo great fun daily.
Wow. Congrats man, you got an absolute gem in low mileage too! im jealous 😂
@flare749 it really was a great find. I was going to look at a civic si then they had this come in day before. It's not perfect has some cosmetic flaws especially for mileage. But I love it more and more everyday.
I think that the wrinkle black was a good choice! Definitely more interesting than the wrinkle red everyone has.
Yes, I too love the '500k miles of crusting dried on oil' look.
faster than chrisfix turboing his del sol
And supercharging the Mustang lol
Did he finally turbo it. Feel like I've been waiting forever
@@karlclements7642nah he pranked us with a dashcam video 😂
Is it coming?? I tot hes supercharging his prius
Now you have my attention. I have 2 of those cars. An 03 in San Marino red and an 06 in Alabaster silver, both 2 door and 6 speed. My 06 is a rare ALL OPTION car, it has the spoiler, fog lights AND navigation with carbon fiber trim and no blank swithes!!!
Maturing is realizing Gingium has always been THE man… man doesn’t get enough credit but it’s so cool to see how this channel has changed and grown since I started watching in middle school
This is the video us J series guys have been waiting for because 99% of us either dont have the funds or the time to do it. Props to Gingium!
Absolutely! Been waiting on J series videos like this! It absolutely was a very overlooked car!
Appreciate the work. The j series does not get enough love. Honda needs to make a V6 with a timing chain.
The P2R guys are an awesome bunch. They used to race at my events at the old PBIR track in West Palm. Really cool to see them grow the way they have.
Run Royal purple oil through it for 500 miles then check valves and do it again it’ll make them valve train look new again, then go back to your original oil
Another important step before painting metal parts (especially iron) is to heat the parts with a plumber's torch right before painting. Not too hot, but enough to drive off moisture and expose any residual grease, oil or cleaner left behind.
Great video. Can't wait to see when the turbo is mounted.
Heat gun with VHT is the best way. The oven trick never works.
I vouch heat gun too!
Yup and it comes out way nicer
Can confirm. Couple light tack coats with about 10 minutes to dry, and then a good flood coat and heat gun got me a great looking wrinkle black valve cover with none of the build up lines. Very uniform fingerprint style wrinkles too.
Yeah, I always use a heat gun with great results
Gotta know what you're doing oven works 100%
Your Honda Accord build inspires me. This is so cool...I can't wait for the next episode.
I use the wrinkle paint a lot. Best result it to heat it up with a heat gun, first coat light and the next 2 coats heavy. You’ll get a better result using a heat gun afterwards too
From swaping this engine in my s2000.. youl need stronger bottom end in the long term.. built one aside . But a standard accord 2 doors. That was the rare gem we were looking after. They make really good match to supercharger too.
Should really gap the pistons rings too. How much boost are you planing on trowing at it? You can cerakote pistons and give yourself a little layer of "holly shit" protection too. But if you open the engine just built it with froged internals. They aren't that pricey.
You definitely got a new subscriber!! I have a 07 6-6 coupe that is sitting! Just got it back from replacing the engine! Threw cylinder 5’s spark plug twice! You should make sure you check your spark plugs often to make sure they are tight! There was an issue at the factory with some of that years accords being off a little when cut on cylinder 5! I have a 100k gently used replacement engine and ready to get it back on the road!
Dang this is the first I am seeing of the J series content. Giving me a kick in the pants to get my misfire sorted. Keep it up!
This J30 would respond well to a BG Oil System Flush. It would cleanup nicely inside.
I was hoping you would wrinkle paint the intake manifold as well, but after seeing it with the contrasting silver and black I think that was the right decision. this thing looks great!
Eat the cat don’t eat the dog. Sweet mod. I looked up the super charger upgrade that looks like some more fun times for the 3.0 Honda. Your videos are so much better than most. Thanks a lot.
This has been by far my favourite build series . Not necessarily my favourite car even though I love Hondas .
Keep it jdm cars,
Simple but nice interior upgrades, custom exhaust , new brakes wheels , turbo and engine mods and a few bolt on exterior mods makes for the best most relatable build series . The numbers don’t lie 😊
Always love seeing another J-Series getting some love! Good luck with the build 🤙
Looks like an awesome build. Excited to see this thing rip! Ready as well to see that SI hatch build.
VHT has a deeper and better looking wrinkle if you let it dry in cooler temps (warm room). Higher oven temps will make the wrinkles "tighter" or smaller
The track you chose when you started taking down the power steering pump had me vibing hard haha. You have a really good music taste dude.
The before and after shots cannot be overstated. So good. So good
The title makes me think Honda Cr-z but honestly the J30 doesn't get enough attention and this was insightful to my own turbo project (yes it's a CR-Z)
The work accomplished in one video 💪🏽💪🏽 excited for this! Going to learn more about my turbo setup along the way!
Nice work as always!! Quick tip, get a carbide scraper and ditch the razor blade for removing old gasket material. Just recently started using one and its so much better.
u should punch the block out to 90mm and swap in a j37 crank and rods, it will make it a 3.7L which will give u that lowend before boost hits and make the turbo spool better too
Cool, I have a 3.0 Turbo also.
Can't wait to see power and Dragy numbers.
You should valveoline restore and protect oil for the next 2-3 oil changes and see how it does cleaning the varnish / sludge in the engine and pop the valve cover off to see
Ain't no way. Fam, I was just catching up with the last 2 accord videos, and here's another, God is good.
Hey Gingium I've done powder coating at home and if I can do it I think you can too. I'd say the hardest part is the oven but you can just pick up a regular kitchen oven and set it up in the shop. I used a sandblasting cabinet to get my parts cleaned up and I think I saw you had one. Only things you would have problem powder coating is rims but if you really get into it I seen people make big ovens with kitchen oven elements and regular insulation stuff you'd find in a regular hardware store
One of my dream cars since I was a yougin is a 2007 Acura TL Type-S with a turbo kit. Nice to see the J series getting some love.
glad to finally see someone doing this and documenting it
someone is finally building a J series on youtube 🙏🏼🙏🏼🙏🏼 i thought that this day would never come
I love the Honda content 👌 father in law got a K20a2 swapped of the same Accord & i keep spamming him your build series 😂
When adjusting valve lash, it's common to find them tight because valves stretch and take up the lash.
Ive had great results with thinner coats using a hair dryer or heat gun in between coats to activate the wrinkle.
nice work. need to do this to my 08 TL Type S
Nicely done, brother. Things gonna be fwd monster. Honda fan from Brandon MB.
Probably the cleanest accord I’ve seen 👍🏻
Pretty cool build. Saw two j swaps in miatas this weekend.
wow, that clean up with the wrinkle black looks really good!
magnesium j35/37 manifolds will definitely hellp with heatsoak/iat issues
Great vid. I've also seen some great results using a heat gun as well
If you have the hood clearance for it, you should look into getting the intake spacer off of a Honda odyssey with the J35, it makes the intake sound so good and the throttle response is a tad better!
Finally! I've been patiently waiting for you to boost this thing. Hell yeah brother!
This is my favorite series to watch while eating 😭I watch the whole vid without a beat😭☝️
if you really want to refresh the engine and make sure you don't have starvation issues later i suggest you flush the engine using liqui moly or BG products
I miss my 05 Accord, parts were super cheap and super easy to install. I currently own a 06 Acura TL 6MT with a J37 swap. I could have bought 2x 05 accords with the amount of money Ive spent on my TL. To even get the hondata flash flashpro to work I had to buy an 07 ECU, a boomslang adaptor harness, and a 06 TL Non-navi ecu & can adaptor. Thats why when i see people who have the 5 speed automatic wanting to upgrade their engines I always suggest to sell it and buy a 6MT.
Awesome build. My friend owned one back in the day.
ill never forget the motorsport 6 videos. come a long way
Red crinkle paint would've looked good for the intake manifold cover and the valve covers. The exterior Honda badges are red, so those little touches would make it pop.
I was just watching the whole series since I got myself an 03 sedan. So stoked to modify it as my new daily
Great video! Been loving this series. Love how it’s went from a dirty daily to a nice daily to a fucking turbocharged daily! 😂😂😂
It would be nice if you added a "part 1" in the title since I'm sure not the only one who likes to binge watch this type of videos to the final result.
Brother I’m loving the soundtracks. Thank you for another banger man.
You need a new oven. Do not cook In that oven now.
You really really really should do a valve clearance check, those intake valves are known to get tight, spoke too soon well done
One of my favorite accords period friend of mine had 07 v6 6mt and use to beat me in my 03 infinity i35 4speedauto but once I bought an 03 maxima 6mt basically same car I finally beat him !! Those 6 speed maxima 02-03 were no joke and stock vs stock they out ran the 03-04 nissan 350z so in 05 350z came with rev up motor more power lol but yeah love the content thanks for the video
Well, I owned one of these back in the day, all 200hp of her. I dreamed of a turbo build, so thank you for this
Please when washing your engine bay cover it with something. It could possibly damage your alternator and thats obviously not good. Just a tip ! Great video btw I love watching the progress
I miss my v6 accord so much, glad to see someone put a turbo on the J.
Great video. Appreciate the clear, steady video, great lighting and angles. Also, great job in editing, getting straight into the content. I am looking forward to the manifold fabrication and turbo pipe routing.
What's your camera setup?
Love the build but I was really hoping so see a supercharged v6 accord build😂 still loved the series though!
Nice project! Don't have an Accord, but I do have a 2018 Odyssey Touring with the 10 speed auto. 😂
Came out so good aesthetically! Then a turbo J series is going to absolutely rip!
@8:56 you try to get rid of all that tarnish with Valvoline’s Restore & Protect oil. I heard it works wonders
Use heatgun to dry wrinkle paint the results are much more consistent and also take your time if you want gud results
Very nice work. im interested to hear the v6 turbo noises too!
Bro repaint the intake silver too and honda letters in RED. She coming along so clean man!
Loving the Honda content 🤎
You can use that wrinkle black with out baking in the oven and get the same result or even better lol I have a wrinkle black intake I did and never put it in an oven and it still looks perfect and has the texture to it
Boosted J's are so underrated. Cant wait to see the build
Interesting to see how well that paint holds up. I tried to paint my J's manifold twice and it just wouldn't stick. Ended up giving up and having it powder coated. Then again I didn't sand it like you said lol
Nicely done refresh.
Haven't watched your vids in awhile man. Do like them. I at times go back to watch your gaming vids.
I think you should've put a resoration fluid in the engine, has some carbon build up. BG complete resoration is really good
Sean is awesome from P2R
Busch's aluminum wash for removing grease, dirt and oxidation. Stuff works wonders.
Looking forward from the next video!! A big cheers from Portugal!! ;D
Wow that oven trick really turned out cool. Would have not guessed it would do that. If you do this regularly might want to get a dedicated oven for that though. :P
Man I used to have one of these wasn’t even close to how nice this one is but I miss that thing hella fun to drive
I've got a Pulsar 4849G (G25-550 clone) and it's LOUD even without the T1R mod. Pulsars seem to be way louder than the Garrett equivalents from what I've heard from others also. It's too much for a daily driver so I hope you don't regret going T1R mod haha.
I'm so happy every time Ging posts a new vid!
You ever need something coated and a fast turn around just lmk, I have some coating on my channel and actually stopped doing youtube I got so busy. Never backed up and never overpriced 👏
Can’t wait to see this thing running with the turbo.